使用pssh进行并行批量操作
假如同时给上千台服务器执行一个命令,拷贝一个文件,杀一个进程等,有什么简化运维管理的工具呢?在小型使用中我都是使用for循环,数量巨大,一方面不确定操作是否成功,一方面for循环语句性能不好估计且是不是同步并行执行.，这类工具比如pdsh，mussh，cssh，dsh等还有这里提到的pssh:
1 安装:
1 安装:
#wget http://peak.telecommunity.com/dist/ez_setup.py
python ez_setup.py
#wget http://parallel-ssh.googlecode.com/files/pssh-2.2.2.tar.gz
# tar zxvf pssh-2.2.2.tar.gz
# cd pssh-2.2.2
# python setup.py install
python ez_setup.py
#wget http://parallel-ssh.googlecode.com/files/pssh-2.2.2.tar.gz
# tar zxvf pssh-2.2.2.tar.gz
# cd pssh-2.2.2
# python setup.py install
[root
@server pssh-2.2.2
]
# pssh -P -h test.txt uptime
192.168.9.102: 14:04:58 up 26 days, 17:05, 0 users, load average: 0.07, 0.02, 0.00
192.168.9.102: [1 ] 14:04:58 [SUCCESS ] 192.168.9.102 9922
192.168.8.171: 14:04:59 up 35 days, 2:01, 6 users, load average: 0.00, 0.00, 0.00
192.168.8.171: [2 ] 14:04:59 [SUCCESS ] 192.168.8.171 22
192.168.9.104: 14:04:59 up 7 days, 20:59, 0 users, load average: 0.10, 0.04, 0.01
192.168.9.104: [ 3 ] 14:04: 59 [SUCCESS ] 192.168.9.104 9922
[root @server pssh-2.2.2 ] # cat test.txt
192.168.9.102:9922
192.168.9.104:9922
192.168.8.171:22 //注意我的端口号不仅是默认的22
假如想将输出重定向到一个文件 加-o file 选项
192.168.9.102: 14:04:58 up 26 days, 17:05, 0 users, load average: 0.07, 0.02, 0.00
192.168.9.102: [1 ] 14:04:58 [SUCCESS ] 192.168.9.102 9922
192.168.8.171: 14:04:59 up 35 days, 2:01, 6 users, load average: 0.00, 0.00, 0.00
192.168.8.171: [2 ] 14:04:59 [SUCCESS ] 192.168.8.171 22
192.168.9.104: 14:04:59 up 7 days, 20:59, 0 users, load average: 0.10, 0.04, 0.01
192.168.9.104: [ 3 ] 14:04: 59 [SUCCESS ] 192.168.9.104 9922
[root @server pssh-2.2.2 ] # cat test.txt
192.168.9.102:9922
192.168.9.104:9922
192.168.8.171:22 //注意我的端口号不仅是默认的22
假如想将输出重定向到一个文件 加-o file 选项
2 pscp 把文件并行地复制到多个主机上
注意 是从服务器端给客户端传送文件:
注意 是从服务器端给客户端传送文件:
[root
@server pssh-2.2.2
]
# pscp -h test.txt /etc/sysconfig/network /tmp/network //标示将本地的/etc/sysconfig/network传到目标服务器的/tmp/network
3 prsync 使用rsync协议从本地计算机同步到远程主机
[root
@server ~
]
# pssh -h test.txt -P mkdir /tmp/etc
[root @server ~ ] # prsync -h test.txt -l dongwm -a -r /etc/sysconfig /tmp/etc //标示将本地的/etc/sysconfig目录递归同步到目标服务器的 /tmp/etc目录下,并保持原来的时间戳,使用用户 dongwm
[root @server ~ ] # prsync -h test.txt -l dongwm -a -r /etc/sysconfig /tmp/etc //标示将本地的/etc/sysconfig目录递归同步到目标服务器的 /tmp/etc目录下,并保持原来的时间戳,使用用户 dongwm
4 pslurp 将文件从远程主机复制到本地,和pscp方向相反:
[root
@server ~
]
# pslurp -h test.txt -L /tmp/test -l root /tmp/network test //标示将目标服务器的/tmp/network文件复制到本地的/tmp/test目录下,并更名为test
[ 1 ] 14: 53: 54 [SUCCESS ] 192.168.9.102 9922
[ 2 ] 14: 53: 54 [SUCCESS ] 192.168.9.104 9922
[root @server ~ ] # ll /tmp/test/192.168.9.10
192.168.9.102 / 192.168.9.104 /
[root @server ~ ] # ll /tmp/test/192.168.9.102/
总计 4.0K
-rw-r--r-- 1 root root 60 2011-04-22 14:53 test
[root @server ~ ] # ll /tmp/test/192.168.9.104/
总计 4.0K
-rw-r--r-- 1 root root 60 2011-04-22 14:53 test
[ 1 ] 14: 53: 54 [SUCCESS ] 192.168.9.102 9922
[ 2 ] 14: 53: 54 [SUCCESS ] 192.168.9.104 9922
[root @server ~ ] # ll /tmp/test/192.168.9.10
192.168.9.102 / 192.168.9.104 /
[root @server ~ ] # ll /tmp/test/192.168.9.102/
总计 4.0K
-rw-r--r-- 1 root root 60 2011-04-22 14:53 test
[root @server ~ ] # ll /tmp/test/192.168.9.104/
总计 4.0K
-rw-r--r-- 1 root root 60 2011-04-22 14:53 test
5 pnuke 并行在远程主机杀进程:
[root
@server ~
]
# pnuke -h test.txt syslog //杀死目标服务器的syslog进程,只要ps进程中出现相关词语 都能杀死
[ 1 ] 15:05: 14 [SUCCESS ] 192.168.9.102 9922
[ 2 ] 15:05: 14 [SUCCESS ] 192.168.9.104 9922
http://www.dongwm.com/archives/%E4%BD%BF%E7%94%A8pssh%E8%BF%9B%E8%A1%8C%E5%B9%B6%E8%A1%8C%E6%89%B9%E9%87%8F%E6%93%8D%E4%BD%9C/