Categories of Java HotSpot VM Options

Some Useful -XX Options

Default values are listed for Java SE 6 for Solaris Sparc with -server. Some options may vary per architecture/OS/JVM version. Platforms with a differing default value are listed in the description.

Boolean options are turned on with -XX:+<option> and turned off with -XX:-<option>.
Numeric options are set with -XX:<option>=<number>. Numbers can include 'm' or 'M' for megabytes, 'k' or 'K' for kilobytes, and 'g' or 'G' for gigabytes (for example, 32k is the same as 32768).
String options are set with -XX:<option>=<string>, are usually used to specify a file, a path, or a list of commands
Flags marked as manageable are dynamically writeable through the JDK management interface (com.sun.management.HotSpotDiagnosticMXBean API) and also through JConsole. In Monitoring and Managing Java SE 6 Platform Applications, Figure 3 shows an example. The manageable flags can also be set through jinfo -flag.

The options below are loosely grouped into three categories.

Behavioral options change the basic behavior of the VM.
Performance tuning options are knobs which can be used to tune VM performance.
Debugging options generally enable tracing, printing, or output of VM information.

Behavioral Options

Option and Default Value
Description
-XX:-AllowUserSignalHandlers Do not complain if the application installs signal handlers. (Relevant to Solaris and Linux only.)

-XX:AltStackSize=16384 Alternate signal stack size (in Kbytes). (Relevant to Solaris only, removed from 5.0.)

-XX:-DisableExplicitGC Disable calls to System.gc(), JVM still performs garbage collection when necessary.

-XX:+FailOverToOldVerifier Fail over to old verifier when the new type checker fails. (Introduced in 6.)

-XX:+HandlePromotionFailure The youngest generation collection does not require a guarantee of full promotion of all live objects. (Introduced in 1.4.2 update 11) [5.0 and earlier: false.]

-XX:+MaxFDLimit Bump the number of file descriptors to max. (Relevant  to Solaris only.)

-XX:PreBlockSpin=10 Spin count variable for use with -XX:+UseSpinning. Controls the maximum spin iterations allowed before entering operating system thread synchronization code. (Introduced in 1.4.2.)

-XX:-RelaxAccessControlCheck Relax the access control checks in the verifier. (Introduced in 6.)

-XX:+ScavengeBeforeFullGC Do young generation GC prior to a full GC. (Introduced in 1.4.1.)

-XX:+UseAltSigs Use alternate signals instead of SIGUSR1 and SIGUSR2 for VM internal signals. (Introduced in 1.3.1 update 9, 1.4.1. Relevant to Solaris only.)

-XX:+UseBoundThreads Bind user level threads to kernel threads. (Relevant to Solaris only.)

-XX:-UseConcMarkSweepGC Use concurrent mark-sweep collection for the old generation. (Introduced in 1.4.1)

-XX:+UseGCOverheadLimit Use a policy that limits the proportion of the VM's time that is spent in GC before an OutOfMemory error is thrown. (Introduced in 6.)

-XX:+UseLWPSynchronization Use LWP-based instead of thread based synchronization. (Introduced in 1.4.0. Relevant to Solaris only.)

-XX:-UseParallelGC Use parallel garbage collection for scavenges. (Introduced in 1.4.1)

-XX:-UseParallelOldGC Use parallel garbage collection for the full collections. Enabling this option automatically sets -XX:+UseParallelGC. (Introduced in 5.0 update 6.)

-XX:-UseSerialGC Use serial garbage collection. (Introduced in 5.0.)

-XX:-UseSpinning Enable naive spinning on Java monitor before entering operating system thread synchronizaton code. (Relevant to 1.4.2 and 5.0 only.) [1.4.2, multi-processor Windows platforms: true]

-XX:+UseTLAB Use thread-local object allocation (Introduced in 1.4.0, known as UseTLE prior to that.) [1.4.2 and earlier, x86 or with -client: false]

-XX:+UseSplitVerifier Use the new type checker with StackMapTable attributes. (Introduced in 5.0.)[5.0: false]

-XX:+UseThreadPriorities Use native thread priorities.

-XX:+UseVMInterruptibleIO Thread interrupt before or with EINTR for I/O operations results in OS_INTRPT. (Introduced in 6. Relevant to Solaris only.)


Back to Options

Performance Options

Option and Default Value
Description
-XX:+AggressiveOpts Turn on point performance compiler optimizations that are expected to be default in upcoming releases. (Introduced in 5.0 update 6.)

-XX:CompileThreshold=10000 Number of method invocations/branches before compiling [-client: 1,500]

-XX:LargePageSizeInBytes=4m Sets the large page size used for the Java heap. (Introduced in 1.4.0 update 1.) [amd64: 2m.]

-XX:MaxHeapFreeRatio=70 Maximum percentage of heap free after GC to avoid shrinking.

-XX:MaxNewSize=size Maximum size of new generation (in bytes). Since 1.4, MaxNewSize is computed as a function of NewRatio. [1.3.1 Sparc: 32m; 1.3.1 x86: 2.5m.]

-XX:MaxPermSize=64m Size of the Permanent Generation.  [5.0 and newer: 64 bit VMs are scaled 30% larger; 1.4 amd64: 96m; 1.3.1 -client: 32m.]

-XX:MinHeapFreeRatio=40 Minimum percentage of heap free after GC to avoid expansion.

-XX:NewRatio=2 Ratio of new/old generation sizes. [Sparc -client: 8; x86 -server: 8; x86 -client: 12.]-client: 4 (1.3) 8 (1.3.1+), x86: 12]

-XX:NewSize=2.125m Default size of new generation (in bytes) [5.0 and newer: 64 bit VMs are scaled 30% larger; x86: 1m; x86, 5.0 and older: 640k]

-XX:ReservedCodeCacheSize=32m Reserved code cache size (in bytes) - maximum code cache size. [Solaris 64-bit, amd64, and -server x86: 48m; in 1.5.0_06 and earlier, Solaris 64-bit and and64: 1024m.]

-XX:SurvivorRatio=8 Ratio of eden/survivor space size [Solaris amd64: 6; Sparc in 1.3.1: 25; other Solaris platforms in 5.0 and earlier: 32]

-XX:TargetSurvivorRatio=50 Desired percentage of survivor space used after scavenge.

-XX:ThreadStackSize=512 Thread Stack Size (in Kbytes). (0 means use default stack size) [Sparc: 512; Solaris x86: 320 (was 256 prior in 5.0 and earlier); Sparc 64 bit: 1024; Linux amd64: 1024 (was 0 in 5.0 and earlier); all others 0.]

-XX:+UseBiasedLocking Enable biased locking. For more details, see this tuning example. (Introduced in 5.0 update 6.) [5.0: false]

-XX:+UseFastAccessorMethods Use optimized versions of Get<Primitive>Field.

-XX:-UseISM Use Intimate Shared Memory. [Not accepted for non-Solaris platforms.] For details, see Intimate Shared Memory.

-XX:+UseLargePages Use large page memory. (Introduced in 5.0 update 5.) For details, see Java Support for Large Memory Pages.

-XX:+UseMPSS Use Multiple Page Size Support w/4mb pages for the heap. Do not use with ISM as this replaces the need for ISM. (Introduced in 1.4.0 update 1, Relevant to Solaris 9 and newer.) [1.4.1 and earlier: false]

-XX:+StringCache Enables caching of commonly allocated strings.

-XX:AllocatePrefetchLines=1 Number of cache lines to load after the last object allocation using prefetch instructions generated in JIT compiled code. Default values are 1 if the last allocated object was an instance and 3 if it was an array.

-XX:AllocatePrefetchStyle=1 Generated code style for prefetch instructions.
0 - no prefetch instructions are generate*d*,
1 - execute prefetch instructions after each allocation,
2 - use TLAB allocation watermark pointer to gate when prefetch instructions are executed.


Back to Options

Debugging Options

Option and Default Value
Description
-XX:-CITime Prints time spent in JIT Compiler. (Introduced in 1.4.0.)

-XX:ErrorFile=./hs_err_pid<pid>.log If an error occurs, save the error data to this file. (Introduced in 6.)

-XX:-ExtendedDTraceProbes Enable performance-impacting dtrace probes. (Introduced in 6. Relevant to Solaris only.)

-XX:HeapDumpPath=./java_pid<pid>.hprof Path to directory or filename for heap dump. Manageable. (Introduced in 1.4.2 update 12, 5.0 update 7.)

-XX:-HeapDumpOnOutOfMemoryError Dump heap to file when java.lang.OutOfMemoryError is thrown. Manageable. (Introduced in 1.4.2 update 12, 5.0 update 7.)

-XX:OnError="<cmd args>;<cmd args>" Run user-defined commands on fatal error. (Introduced in 1.4.2 update 9.)

-XX:OnOutOfMemoryError="<cmd args>;
<cmd args>" Run user-defined commands when an OutOfMemoryError is first thrown. (Introduced in 1.4.2 update 12, 6)

-XX:-PrintClassHistogram Print a histogram of class instances on Ctrl-Break. Manageable. (Introduced in 1.4.2.) The jmap -histo command provides equivalent functionality.

-XX:-PrintConcurrentLocks Print java.util.concurrent locks in Ctrl-Break thread dump. Manageable. (Introduced in 6.) The jstack -l command provides equivalent functionality.

-XX:-PrintCommandLineFlags Print flags that appeared on the command line. (Introduced in 5.0.)

-XX:-PrintCompilation Print message when a method is compiled.

-XX:-PrintGC Print messages at garbage collection. Manageable.

-XX:-PrintGCDetails Print more details at garbage collection. Manageable. (Introduced in 1.4.0.)

-XX:-PrintGCTimeStamps Print timestamps at garbage collection. Manageable (Introduced in 1.4.0.)

-XX:-PrintTenuringDistribution Print tenuring age information.

-XX:-TraceClassLoading Trace loading of classes.

-XX:-TraceClassLoadingPreorder Trace all classes loaded in order referenced (not loaded). (Introduced in 1.4.2.)

-XX:-TraceClassResolution Trace constant pool resolutions. (Introduced in 1.4.2.)

-XX:-TraceClassUnloading Trace unloading of classes.

-XX:-TraceLoaderConstraints Trace recording of loader constraints. (Introduced in 6.)

-XX:+PerfSaveDataToFile Saves jvmstat binary data on exit.

你可能感兴趣的:(java,thread,linux,Solaris,performance)