华为ENSP

华为ENSP

 

1) DHCP自动分配IP地址

第一种方法

[sw1]int vlan 10

[sw1-Vlanif10]ip add 192.168.10.1 24

[sw1]dhcp enable  

[sw1]int vlan 10

[sw1-Vlanif10]dhcp select interface   

[sw1-Vlanif10]dhcp server dns-list 1.1.1.1

 

第二种方法

vlan batch 10 20 100

dhcp enable

ip pool v10

 gateway-list 192.168.10.1

 network 192.168.10.0 mask 255.255.255.0

 dns-list 2.2.2.2

interface Vlan 10

dhcp select global

 

 

2) 设置VLAN

第一种方法

[sw3]vlan bat 10 20 30

[sw3]int e0/0/10

[sw3-Ethernet0/0/10]port link-type access   

[sw3-Ethernet0/0/10]port default vlan 10

[sw3-Ethernet0/0/3]in e0/0/5

[sw3-Ethernet0/0/5]port link-type trunk  

[sw3-Ethernet0/0/5]port trunk allow-pass vlan 10 20 30

 

第二种方法

[sw2-Ethernet0/0/1]int e0/0/2

[sw2-Ethernet0/0/2]port hybrid pvid vlan 20

[sw2-Ethernet0/0/2]port hybrid untagged vlan 20

[sw2-Ethernet0/0/1]int e0/0/2

[sw2-Ethernet0/0/2]port hybrid pvid vlan 20

[sw2-Ethernet0/0/2]port hybrid tagged vlan 20

 

3)  RIP

[sw1]rip

[sw1-rip-1]version 2

[sw1-rip-1]undo summary   

[sw1-rip-1]network 192.168.10.0

[sw1-rip-1]network 192.168.20.0

[sw1-rip-1]network 192.168.30.0

[sw1-rip-1]net 11.0.0.0

 

 

4)  接口设置IP---路由器

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]ip add 11.0.0.1 24

[r1-GigabitEthernet0/0/0]int g0/0/1

[r1-GigabitEthernet0/0/1]ip add 12.0.0.1 24

 

5)  开启远程登录-----交换机

[sw1]user-interface vty 0 4

[sw1-ui-vty0-4]authentication-mode aaa

[sw1-aaa]local-user sw1 password cipher 123456 privilege level 3

[sw1-aaa]local-user sw1 service-type telnet

 

6)  路由器开启Telnet

[r2]user-interface vty 0 4

[r2-ui-vty0-4]authentication-mode password

Please configure the login password (maximum length 16):123456

 

7)  设置ACL

[r1]acl name r1 2001 #设置acl名称及序列号

[r1-acl-basic-r1]rule  5 permit source 192.168.10.0 0.0.0.0

[r1]user-interface  vty  0 4

[r1-ui-vty0-4]acl 2001 inbound  #在接口上应用acl规则

 

[R2]acl name r2 2002

[R2-acl-basic-r2]rule 5 permit source 192.168.10.0 0.0.0.0

[R2-ui-vty0-4]acl 2002 inbound

 

 

8)  OSPF

R1(config)#router ospf 110

R1(config-router)#network 12.0.0.0 0.0.0.255 area 1

R1(config-router)#network 192.168.10.0 0.0.0.255 area 1

 

 

 

 

9)  VRRP----路由器

interface GigabitEthernet0/0/1.10

dot1q termination vid 10

ip address 192.168.10.10 255.255.255.0

vrrp vrid 1 virtual-ip 192.168.10.1

vrrp vrid 1 priority 120

vrrp vrid 1 track interface GigabitEthernet0/0/0

arp broadcast enable

 

10)链路捆绑及TRUNK

第一种方法

[sw2]int Eth-Trunk 1

[sw2-Eth-Trunk1]int e0/0/10

[sw2-Ethernet0/0/10]eth-trunk 1

[sw2-Ethernet0/0/10]int e0/0/11

[sw2-Ethernet0/0/11]eth-trunk 1

[sw2]dis eth-trunk 1

PortName                      Status      Weight

Ethernet0/0/10                Up          1      

Ethernet0/0/11                Up          1      

第二种方法

 

11)做映射代理

[sw1-Vlanif30]int vlan 30  

[sw1-Vlanif30]dhcp select relay

[sw1-Vlanif30]dhcp relay server-ip 23.0.0.3 

你可能感兴趣的:(华为)