[case27]聊聊hystrix的fallback

本文主要研究下hystrix的fallback

AbstractCommand.executeCommandAndObserve

hystrix-core-1.5.12-sources.jar!/com/netflix/hystrix/AbstractCommand.java

    /**
     * This decorates "Hystrix" functionality around the run() Observable.
     *
     * @return R
     */
    private Observable executeCommandAndObserve(final AbstractCommand _cmd) {
        //......

        final Func1> handleFallback = new Func1>() {
            @Override
            public Observable call(Throwable t) {
                circuitBreaker.markNonSuccess();
                Exception e = getExceptionFromThrowable(t);
                executionResult = executionResult.setExecutionException(e);
                if (e instanceof RejectedExecutionException) {
                    return handleThreadPoolRejectionViaFallback(e);
                } else if (t instanceof HystrixTimeoutException) {
                    return handleTimeoutViaFallback();
                } else if (t instanceof HystrixBadRequestException) {
                    return handleBadRequestByEmittingError(e);
                } else {
                    /*
                     * Treat HystrixBadRequestException from ExecutionHook like a plain HystrixBadRequestException.
                     */
                    if (e instanceof HystrixBadRequestException) {
                        eventNotifier.markEvent(HystrixEventType.BAD_REQUEST, commandKey);
                        return Observable.error(e);
                    }

                    return handleFailureViaFallback(e);
                }
            }
        };

        //......

        Observable execution;
        if (properties.executionTimeoutEnabled().get()) {
            execution = executeCommandWithSpecifiedIsolation(_cmd)
                    .lift(new HystrixObservableTimeoutOperator(_cmd));
        } else {
            execution = executeCommandWithSpecifiedIsolation(_cmd);
        }

        return execution.doOnNext(markEmits)
                .doOnCompleted(markOnCompleted)
                .onErrorResumeNext(handleFallback)
                .doOnEach(setRequestContext);
    }
  • 使用Observable的onErrorResumeNext,里头调用了handleFallback
  • handleFallback中区分不同的异常来调用不同的fallback
  • RejectedExecutionException调用handleThreadPoolRejectionViaFallback
  • HystrixTimeoutException调用handleTimeoutViaFallback
  • 其他非HystrixBadRequestException的调用handleFailureViaFallback

AbstractCommand.applyHystrixSemantics

hystrix-core-1.5.12-sources.jar!/com/netflix/hystrix/AbstractCommand.java

    private Observable applyHystrixSemantics(final AbstractCommand _cmd) {
        // mark that we're starting execution on the ExecutionHook
        // if this hook throws an exception, then a fast-fail occurs with no fallback.  No state is left inconsistent
        executionHook.onStart(_cmd);

        /* determine if we're allowed to execute */
        if (circuitBreaker.attemptExecution()) {
            final TryableSemaphore executionSemaphore = getExecutionSemaphore();
            final AtomicBoolean semaphoreHasBeenReleased = new AtomicBoolean(false);
            final Action0 singleSemaphoreRelease = new Action0() {
                @Override
                public void call() {
                    if (semaphoreHasBeenReleased.compareAndSet(false, true)) {
                        executionSemaphore.release();
                    }
                }
            };

            final Action1 markExceptionThrown = new Action1() {
                @Override
                public void call(Throwable t) {
                    eventNotifier.markEvent(HystrixEventType.EXCEPTION_THROWN, commandKey);
                }
            };

            if (executionSemaphore.tryAcquire()) {
                try {
                    /* used to track userThreadExecutionTime */
                    executionResult = executionResult.setInvocationStartTime(System.currentTimeMillis());
                    return executeCommandAndObserve(_cmd)
                            .doOnError(markExceptionThrown)
                            .doOnTerminate(singleSemaphoreRelease)
                            .doOnUnsubscribe(singleSemaphoreRelease);
                } catch (RuntimeException e) {
                    return Observable.error(e);
                }
            } else {
                return handleSemaphoreRejectionViaFallback();
            }
        } else {
            return handleShortCircuitViaFallback();
        }
    }
  • applyHystrixSemantics方法针对executionSemaphore.tryAcquire()没通过的调用handleSemaphoreRejectionViaFallback
  • applyHystrixSemantics方法针对circuitBreaker.attemptExecution()没通过的调用handleShortCircuitViaFallback()

ViaFallback方法

hystrix-core-1.5.12-sources.jar!/com/netflix/hystrix/AbstractCommand.java

    private Observable handleSemaphoreRejectionViaFallback() {
        Exception semaphoreRejectionException = new RuntimeException("could not acquire a semaphore for execution");
        executionResult = executionResult.setExecutionException(semaphoreRejectionException);
        eventNotifier.markEvent(HystrixEventType.SEMAPHORE_REJECTED, commandKey);
        logger.debug("HystrixCommand Execution Rejection by Semaphore."); // debug only since we're throwing the exception and someone higher will do something with it
        // retrieve a fallback or throw an exception if no fallback available
        return getFallbackOrThrowException(this, HystrixEventType.SEMAPHORE_REJECTED, FailureType.REJECTED_SEMAPHORE_EXECUTION,
                "could not acquire a semaphore for execution", semaphoreRejectionException);
    }

    private Observable handleShortCircuitViaFallback() {
        // record that we are returning a short-circuited fallback
        eventNotifier.markEvent(HystrixEventType.SHORT_CIRCUITED, commandKey);
        // short-circuit and go directly to fallback (or throw an exception if no fallback implemented)
        Exception shortCircuitException = new RuntimeException("Hystrix circuit short-circuited and is OPEN");
        executionResult = executionResult.setExecutionException(shortCircuitException);
        try {
            return getFallbackOrThrowException(this, HystrixEventType.SHORT_CIRCUITED, FailureType.SHORTCIRCUIT,
                    "short-circuited", shortCircuitException);
        } catch (Exception e) {
            return Observable.error(e);
        }
    }

    private Observable handleThreadPoolRejectionViaFallback(Exception underlying) {
        eventNotifier.markEvent(HystrixEventType.THREAD_POOL_REJECTED, commandKey);
        threadPool.markThreadRejection();
        // use a fallback instead (or throw exception if not implemented)
        return getFallbackOrThrowException(this, HystrixEventType.THREAD_POOL_REJECTED, FailureType.REJECTED_THREAD_EXECUTION, "could not be queued for execution", underlying);
    }

    private Observable handleTimeoutViaFallback() {
        return getFallbackOrThrowException(this, HystrixEventType.TIMEOUT, FailureType.TIMEOUT, "timed-out", new TimeoutException());
    }

    private Observable handleFailureViaFallback(Exception underlying) {
        /**
         * All other error handling
         */
        logger.debug("Error executing HystrixCommand.run(). Proceeding to fallback logic ...", underlying);

        // report failure
        eventNotifier.markEvent(HystrixEventType.FAILURE, commandKey);

        // record the exception
        executionResult = executionResult.setException(underlying);
        return getFallbackOrThrowException(this, HystrixEventType.FAILURE, FailureType.COMMAND_EXCEPTION, "failed", underlying);
    }
  • handleSemaphoreRejectionViaFallback、handleShortCircuitViaFallback、handleThreadPoolRejectionViaFallback、handleTimeoutViaFallback、handleFailureViaFallback这几个方法调用了getFallbackOrThrowException
  • 其eventType分别是SEMAPHORE_REJECTED、SHORT_CIRCUITED、THREAD_POOL_REJECTED、TIMEOUT、FAILURE

AbstractCommand.getFallbackOrThrowException

hystrix-core-1.5.12-sources.jar!/com/netflix/hystrix/AbstractCommand.java

    /**
     * Execute getFallback() within protection of a semaphore that limits number of concurrent executions.
     * 

* Fallback implementations shouldn't perform anything that can be blocking, but we protect against it anyways in case someone doesn't abide by the contract. *

* If something in the getFallback() implementation is latent (such as a network call) then the semaphore will cause us to start rejecting requests rather than allowing potentially * all threads to pile up and block. * * @return K * @throws UnsupportedOperationException * if getFallback() not implemented * @throws HystrixRuntimeException * if getFallback() fails (throws an Exception) or is rejected by the semaphore */ private Observable getFallbackOrThrowException(final AbstractCommand _cmd, final HystrixEventType eventType, final FailureType failureType, final String message, final Exception originalException) { final HystrixRequestContext requestContext = HystrixRequestContext.getContextForCurrentThread(); long latency = System.currentTimeMillis() - executionResult.getStartTimestamp(); // record the executionResult // do this before executing fallback so it can be queried from within getFallback (see See https://github.com/Netflix/Hystrix/pull/144) executionResult = executionResult.addEvent((int) latency, eventType); if (isUnrecoverable(originalException)) { logger.error("Unrecoverable Error for HystrixCommand so will throw HystrixRuntimeException and not apply fallback. ", originalException); /* executionHook for all errors */ Exception e = wrapWithOnErrorHook(failureType, originalException); return Observable.error(new HystrixRuntimeException(failureType, this.getClass(), getLogMessagePrefix() + " " + message + " and encountered unrecoverable error.", e, null)); } else { if (isRecoverableError(originalException)) { logger.warn("Recovered from java.lang.Error by serving Hystrix fallback", originalException); } if (properties.fallbackEnabled().get()) { /* fallback behavior is permitted so attempt */ final Action1> setRequestContext = new Action1>() { @Override public void call(Notification rNotification) { setRequestContextIfNeeded(requestContext); } }; final Action1 markFallbackEmit = new Action1() { @Override public void call(R r) { if (shouldOutputOnNextEvents()) { executionResult = executionResult.addEvent(HystrixEventType.FALLBACK_EMIT); eventNotifier.markEvent(HystrixEventType.FALLBACK_EMIT, commandKey); } } }; final Action0 markFallbackCompleted = new Action0() { @Override public void call() { long latency = System.currentTimeMillis() - executionResult.getStartTimestamp(); eventNotifier.markEvent(HystrixEventType.FALLBACK_SUCCESS, commandKey); executionResult = executionResult.addEvent((int) latency, HystrixEventType.FALLBACK_SUCCESS); } }; final Func1> handleFallbackError = new Func1>() { @Override public Observable call(Throwable t) { /* executionHook for all errors */ Exception e = wrapWithOnErrorHook(failureType, originalException); Exception fe = getExceptionFromThrowable(t); long latency = System.currentTimeMillis() - executionResult.getStartTimestamp(); Exception toEmit; if (fe instanceof UnsupportedOperationException) { logger.debug("No fallback for HystrixCommand. ", fe); // debug only since we're throwing the exception and someone higher will do something with it eventNotifier.markEvent(HystrixEventType.FALLBACK_MISSING, commandKey); executionResult = executionResult.addEvent((int) latency, HystrixEventType.FALLBACK_MISSING); toEmit = new HystrixRuntimeException(failureType, _cmd.getClass(), getLogMessagePrefix() + " " + message + " and no fallback available.", e, fe); } else { logger.debug("HystrixCommand execution " + failureType.name() + " and fallback failed.", fe); eventNotifier.markEvent(HystrixEventType.FALLBACK_FAILURE, commandKey); executionResult = executionResult.addEvent((int) latency, HystrixEventType.FALLBACK_FAILURE); toEmit = new HystrixRuntimeException(failureType, _cmd.getClass(), getLogMessagePrefix() + " " + message + " and fallback failed.", e, fe); } // NOTE: we're suppressing fallback exception here if (shouldNotBeWrapped(originalException)) { return Observable.error(e); } return Observable.error(toEmit); } }; final TryableSemaphore fallbackSemaphore = getFallbackSemaphore(); final AtomicBoolean semaphoreHasBeenReleased = new AtomicBoolean(false); final Action0 singleSemaphoreRelease = new Action0() { @Override public void call() { if (semaphoreHasBeenReleased.compareAndSet(false, true)) { fallbackSemaphore.release(); } } }; Observable fallbackExecutionChain; // acquire a permit if (fallbackSemaphore.tryAcquire()) { try { if (isFallbackUserDefined()) { executionHook.onFallbackStart(this); fallbackExecutionChain = getFallbackObservable(); } else { //same logic as above without the hook invocation fallbackExecutionChain = getFallbackObservable(); } } catch (Throwable ex) { //If hook or user-fallback throws, then use that as the result of the fallback lookup fallbackExecutionChain = Observable.error(ex); } return fallbackExecutionChain .doOnEach(setRequestContext) .lift(new FallbackHookApplication(_cmd)) .lift(new DeprecatedOnFallbackHookApplication(_cmd)) .doOnNext(markFallbackEmit) .doOnCompleted(markFallbackCompleted) .onErrorResumeNext(handleFallbackError) .doOnTerminate(singleSemaphoreRelease) .doOnUnsubscribe(singleSemaphoreRelease); } else { return handleFallbackRejectionByEmittingError(); } } else { return handleFallbackDisabledByEmittingError(originalException, failureType, message); } } }

  • fallbackExecutionChain的onErrorResumeNext,调用了handleFallbackError
  • fallbackExecutionChain的doOnCompleted,调用了markFallbackCompleted

AbstractCommand.getFallbackSemaphore

hystrix-core-1.5.12-sources.jar!/com/netflix/hystrix/AbstractCommand.java

    /**
     * Get the TryableSemaphore this HystrixCommand should use if a fallback occurs.
     * 
     * @return TryableSemaphore
     */
    protected TryableSemaphore getFallbackSemaphore() {
        if (fallbackSemaphoreOverride == null) {
            TryableSemaphore _s = fallbackSemaphorePerCircuit.get(commandKey.name());
            if (_s == null) {
                // we didn't find one cache so setup
                fallbackSemaphorePerCircuit.putIfAbsent(commandKey.name(), new TryableSemaphoreActual(properties.fallbackIsolationSemaphoreMaxConcurrentRequests()));
                // assign whatever got set (this or another thread)
                return fallbackSemaphorePerCircuit.get(commandKey.name());
            } else {
                return _s;
            }
        } else {
            return fallbackSemaphoreOverride;
        }
    }
针对每个commandKey获取或创建TryableSemaphoreActual

小结

hystrix的fallback主要分为5种类型:

  • SEMAPHORE_REJECTED对应handleSemaphoreRejectionViaFallback
  • SHORT_CIRCUITED对应handleShortCircuitViaFallback
  • THREAD_POOL_REJECTED对应handleThreadPoolRejectionViaFallback
  • TIMEOUT对应handleTimeoutViaFallback
  • FAILURE对应handleFailureViaFallback
这几个方法最后都调用了getFallbackOrThrowException方法。

doc

  • Fallback

你可能感兴趣的:(hystrix)