问题背景：
新项目还在开发阶段，没有正式对外发布，所以开发同事合并代码到develop上(或者其他名称分支上)，而不是到master分支上
通过git拉取代码的时候，默认拉取的是master分支，如下图：
拉取指定分支代码解决方案：
以拉取develop分支的代码为例， 要拉取其余分支代码类似操作
1.使用git命令拉取
命令：git clone -b develop XXX
其中develop就是分支的名称
E:\test\test>git clone -b develop http://192.168.1.10/test/test.git
Cloning into 'test'...
fatal: Remote branch develop not found in upstream origin
E:\test\test>git clone -b dev http://192.168.1.10/test/test.git
Cloning into 'test'...
remote: Enumerating objects: 87, done.
remote: Counting objects: 100% (87/87), done.
remote: Compressing objects: 100% (62/62), done.
remote: Total 5270 (delta 14), reused 0 (delta 0)
Receiving objects: 100% (5270/5270), 768.53 KiB | 2.97 MiB/s, done.
Resolving deltas: 100% (2200/2200), done.