环境说明:
操作系统: CentOS 6.5 x64,本文采用rpm方式安装heartbeat+drbd，本文只是试用heartbeat+drbd+nfs高可用基本功能。
app1: 192.168.0.24
app1: 192.168.0.25
VIP : 192.168.0.26
一、双机Heartbeat配置
1. app1,app2配置hosts文件
[root@app1 soft]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.0.24 app1
192.168.0.25 app2
10.10.10.24 app1-priv
10.10.10.25 app2-priv
说明：10段是心跳IP, 192.168段是业务IP, 采用VIP地址是192.168.0.26。
2. app1,app2配置安装epel源并安装heartbeat
# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# rpm -ivh epel-release-6-8.noarch.rpm
# yum install heartbeat
3. app1,app2配置安装Heartbeat
说明：本文采用RPM方式包，提前下载到本地的，再安装heartbeat
[root@app1 ~]# cd soft/
[root@app1 soft]# ll
总用量 1924
-rw-r--r-- 1 root root 72744 6月 25 2012 cluster-glue-1.0.5-6.el6.x86_64.rpm
-rw-r--r-- 1 root root 119096 6月 25 2012 cluster-glue-libs-1.0.5-6.el6.x86_64.rpm
-rw-r--r-- 1 root root 165292 12月 3 2013 heartbeat-3.0.4-2.el6.x86_64.rpm
-rw-r--r-- 1 root root 269468 12月 3 2013 heartbeat-libs-3.0.4-2.el6.x86_64.rpm
-rw-r--r-- 1 root root 38264 10月 18 2014 perl-TimeDate-1.16-13.el6.noarch.rpm
-rw-r--r-- 1 root root 913840 7月 3 2011 PyXML-0.8.4-19.el6.x86_64.rpm
-rw-r--r-- 1 root root 374068 11月 10 20:45 resource-agents-3.9.5-24.el6_7.1.x86_64.rpm
[root@app1 soft]#
[root@app1 soft]# rpm -ivh *.rpm
warning: cluster-glue-1.0.5-6.el6.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
warning: heartbeat-3.0.4-2.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:cluster-glue-libs ########################################### [ 14%]
2:resource-agents ########################################### [ 29%]
3:PyXML ########################################### [ 43%]
4:perl-TimeDate ########################################### [ 57%]
5:cluster-glue ########################################### [ 71%]
6:heartbeat-libs ########################################### [ 86%]
7:heartbeat ########################################### [100%]
[root@app1 soft]#
(1) 设置授权KEY
# vi /etc/ha.d/authkeys
auth 1
1 sha1 47e9336850f1db6fa58bc470bc9b7810eb397f04
# chmod 600 /etc/ha.d/authkeys
(2) 添加配置ha资源文件
# vi /etc/ha.d/haresources
# 初始状态服务器绑定VIP的地址在哪个服务器、哪个网卡上，启动什么服务。
app1 IPaddr::192.168.0.26/24/eth0:1
#app1 IPaddr::192.168.0.26/24/eth0:1 drbddisk::data Filesystem::/dev/drbd0::/data::ext4
(3) 配置heartbeat主配置文件
APP1上配置文件:
# vi /etc/ha.d/ha.cf
debugfile /var/log/ha-debug
logfile /var/log/ha-log
logfacility local0
keepalive 2
deadtime 30
warntime 10
initdead 120
udpport 694
bcast eth1
ucast eth1 10.10.10.25
#mcast eth1 225.0.0.24 694 1 0
auto_failback on
node app1
node app2
crm no
#respawn hacluster /usr/lib64/heartbeat/ipfail
#ping 192.168.0.253
APP2上配置文件,与主配置文件有些区别，需要修改。
# vi /etc/ha.d/ha.cf
debugfile /var/log/ha-debug
logfile /var/log/ha-log
logfacility local0
keepalive 2
deadtime 15
warntime 10
initdead 120
udpport 694
bcast eth1
ucast eth1 10.10.10.24
#mcast eth1 225.0.0.25 694 1 0
auto_failback on
node app1
node app2
crm no
#respawn hacluster /usr/lib64/heartbeat/ipfail
#ping 192.168.0.253
4. 将刚才配置的三个文件同步至app2，同步过去后要修改ha.cf文件中的心跳IP
# scp authkeys ha.cf haresources root@app2:/etc/ha.d/
root@app2's password:
authkeys 100% 56 0.1KB/s 00:00
ha.cf 100% 256 0.3KB/s 00:00
haresources 100% 78 0.1KB/s 00:00
5. 启动heartbeat服务，测试能否正常提供服务
节点1:
[root@app1 ha.d]# service heartbeat start
Starting High-Availability services: INFO: Resource is stopped
Done.
节点2:
[root@app2 ha.d]# service heartbeat start
Starting High-Availability services: INFO: Resource is stopped
Done.
6. 手动测试VIP切换
(1) 手动切换成standby状态
# /usr/share/heartbeat/hb_standby
Going standby [all].
或者主服务器 service heartbeat stop 也可以切换VIP到备机上。
(2) 手动切换成主状态
# /usr/share/heartbeat/hb_takeover
主服务器 service heartbeat start 也可以将VIP切回来。
(3) 通过日志查看VIP接管过程
节点1：
# tail -f /var/log/message
Jan 12 12:46:30 app1 heartbeat: [4519]: info: app1 wants to go standby [all]
Jan 12 12:46:30 app1 heartbeat: [4519]: info: standby: app2 can take our all resources
Jan 12 12:46:30 app1 heartbeat: [6043]: info: give up all HA resources (standby).
Jan 12 12:46:30 app1 ResourceManager(default)[6056]: info: Releasing resource group: app1 IPaddr::192.168.0.26/24/eth0
Jan 12 12:46:30 app1 ResourceManager(default)[6056]: info: Running /etc/ha.d/resource.d/IPaddr 192.168.0.26/24/eth0 stop
Jan 12 12:46:30 app1 IPaddr(IPaddr_192.168.0.26)[6119]: INFO: IP status = ok, IP_CIP=
Jan 12 12:46:30 app1 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[6093]: INFO: Success
Jan 12 12:46:30 app1 heartbeat: [6043]: info: all HA resource release completed (standby).
Jan 12 12:46:30 app1 heartbeat: [4519]: info: Local standby process completed [all].
Jan 12 12:46:31 app1 heartbeat: [4519]: WARN: 1 lost packet(s) for [app2] [1036:1038]
Jan 12 12:46:31 app1 heartbeat: [4519]: info: remote resource transition completed.
Jan 12 12:46:31 app1 heartbeat: [4519]: info: No pkts missing from app2!
Jan 12 12:46:31 app1 heartbeat: [4519]: info: Other node completed standby takeover of all resources.
节点2：
[root@app2 ha.d]# tail -f /var/log/messages
Jan 12 12:46:30 app2 heartbeat: [4325]: info: app1 wants to go standby [all]
Jan 12 12:46:30 app2 heartbeat: [4325]: info: standby: acquire [all] resources from app1
Jan 12 12:46:30 app2 heartbeat: [5459]: info: acquire all HA resources (standby).
Jan 12 12:46:30 app2 ResourceManager(default)[5472]: info: Acquiring resource group: app1 IPaddr::192.168.0.26/24/eth0
Jan 12 12:46:30 app2 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[5500]: INFO: Resource is stopped
Jan 12 12:46:30 app2 ResourceManager(default)[5472]: info: Running /etc/ha.d/resource.d/IPaddr 192.168.0.26/24/eth0 start
Jan 12 12:46:31 app2 IPaddr(IPaddr_192.168.0.26)[5625]: INFO: Adding inet address 192.168.0.26/24 with broadcast address 192.168.0.255 to device eth0
Jan 12 12:46:31 app2 IPaddr(IPaddr_192.168.0.26)[5625]: INFO: Bringing device eth0 up
Jan 12 12:46:31 app2 IPaddr(IPaddr_192.168.0.26)[5625]: INFO: /usr/libexec/heartbeat/send_arp -i 200 -r 5 -p /var/run/resource-agents/send_arp-192.168.0.26 eth0 192.168.0.26 auto not_used not_used
Jan 12 12:46:31 app2 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[5599]: INFO: Success
Jan 12 12:46:31 app2 heartbeat: [5459]: info: all HA resource acquisition completed (standby).
Jan 12 12:46:31 app2 heartbeat: [4325]: info: Standby resource acquisition done [all].
Jan 12 12:46:31 app2 heartbeat: [4325]: info: remote resource transition completed.
手动添加VIP地址命令：
/etc/ha.d/resource.d/IPaddr 192.168.0.27/24/eth0:2 start
(4) 查看VIP地址信息,VIP在主节点上。
[root@app1 ha.d]# ip a
1: lo:
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0:
link/ether 00:0c:29:4c:39:43 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.24/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.26/24 brd 192.168.0.255 scope global secondary eth0:1
inet6 fe80::20c:29ff:fe4c:3943/64 scope link
valid_lft forever preferred_lft forever
3: eth1:
link/ether 00:0c:29:4c:39:4d brd ff:ff:ff:ff:ff:ff
inet 10.10.10.24/24 brd 10.10.10.255 scope global eth1
inet6 fe80::20c:29ff:fe4c:394d/64 scope link
valid_lft forever preferred_lft forever
二、DRDB安装配置
1. app1,app2配置hosts文件以及准备磁盘分区
app1: /dev/sdb1
app2: /dev/sdb1
2. 安装drbd并安装
(1) 下载drbd安装包,下载地址如下:
ftp://rpmfind.net/linux/atrpms/el6.5-x86_64/atrpms/stable/
# rpm -ivh drbd-8.4.3-33.el6.x86_64.rpm drbd-kmdl-2.6.32-431.el6-8.4.3-33.el6.x86_64.rpm
warning: drbd-8.4.3-33.el6.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID 66534c2b: NOKEY
Preparing... ########################################### [100%]
1:drbd-kmdl-2.6.32-431.el########################################### [ 50%]
2:drbd ########################################### [100%]
#
(2) 加载DRBD到内核模块
app1,app2分别操作，并加入到/etc/rc.local文件中，可以事先尝试有无自动加载。
lsmode |grep drbd
modprobe drbd
3. 创建修改配置文件。节点1，节点2一样配置。
[root@app1 ~]# vi /etc/drbd.d/global_common.conf
global {
usage-count no;
}
common {
protocol C;
disk {
on-io-error detach;
no-disk-flushes;
no-md-flushes;
}
net {
sndbuf-size 512k;
max-buffers 8000;
unplug-watermark 1024;
max-epoch-size 8000;
cram-hmac-alg "sha1";
shared-secret "hdhwXes23sYEhart8t";
after-sb-0pri disconnect;
after-sb-1pri disconnect;
after-sb-2pri disconnect;
rr-conflict disconnect;
}
syncer {
rate 300M;
al-extents 517;
}
}
resource data {
on app1 {
device /dev/drbd0;
disk /dev/sdb1;
address 192.168.1.120:7788;
meta-disk internal;
}
on app2 {
device /dev/drbd0;
disk /dev/sdb1;
address 192.168.1.121:7788;
meta-disk internal;
}
}
下面是采用内部模式: 用于解决迁移问题，这个实验一直没有做成功，下次再试吧。
resource data {
on app1 {
device /dev/drbd0;
disk /dev/sdb1;
address 192.168.0.24:7788;
meta-disk /dev/sdc1 [0];
}
on app2 {
device /dev/drbd0;
disk /dev/sdb1;
address 192.168.0.25:7788;
meta-disk /dev/sdc1 [0];
}
}
三、drbd启动和查看
1. 初始化资源
在app1和app2上分别执行：
# drbdadm create-md data
Writing meta data...
initializing activity log
NOT initializing bitmap
New drbd meta data block successfully created.
说明: 这一部会出现的问题如下:
# drbdadm create-md data
Command 'drbdmeta 1 v08 /dev/sdb1 internal create-md' terminated with exit code 40
#解决如下，非要做如下DD操作，可能bug
# dd if=/dev/zero of=/dev/sdb1 bs=1M count=10
# sync
# drbdadm create-md data
2. 启动服务
在app1和app2上分别执行：或采用 drbdadm up data
# service drbd start
Starting DRBD resources: [
create res: data
prepare disk: data
adjust disk: data
adjust net: data
]
..........
#
3. 查看启动状态, 两节点应均处于Secondary状态。
cat /proc/drbd #或者直接使用命令drbd-overview
节点1:
[root@app1 drbd.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent C r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:20970828
[root@app1 drbd.d]#
节点2:
[root@app2 drbd.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent C r-----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:20970828
[root@app2 drbd.d]#
4. 将其中一个节点配置为主节点
我们需要将其中一个节点设置为Primary，在要设置为Primary的节点上执行如下命令：
drbdadm -- --overwrite-data-of-peer primary data
drbdadm primary --force data
主节点查看同步状态：
[root@app1 drbd.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:SyncSource ro:Primary/Secondary ds:UpToDate/Inconsistent C r---n-
ns:1440320 nr:0 dw:0 dr:1443488 al:0 bm:85 lo:0 pe:36 ua:3 ap:0 ep:1 wo:d oos:19566924
[>...................] sync'ed: 6.7% (19108/20476)M
finish: 0:24:03 speed: 13,536 (12,760) K/sec
[root@app1 drbd.d]#
备节点查看同步状态：
[root@app2 drbd.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:SyncTarget ro:Secondary/Primary ds:Inconsistent/UpToDate C r-----
ns:0 nr:2063360 dw:2030592 dr:0 al:0 bm:123 lo:33 pe:8 ua:32 ap:0 ep:1 wo:d oos:18940236
[>...................] sync'ed: 9.7% (18496/20476)M
finish: 0:23:54 speed: 13,196 (12,848) want: 3,240 K/sec
[root@app2 drbd.d]#
查看同步状态:
[root@app1 ~]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:20970828 nr:0 dw:0 dr:20971500 al:0 bm:1280 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0
[root@app1 ~]#
[root@app2 drbd.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r-----
ns:0 nr:20970828 dw:20970828 dr:0 al:0 bm:1280 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0
5. 创建文件系统
文件系统的挂载只能在Primary节点进行，只有在设置了主节点后才能对drbd设备进行格式化, 格式化与手动挂载测试。
[root@app1 ~]# mkfs.ext4 /dev/drbd0
[root@app1 ~]# mount /dev/drbd0 /data
6. 手动切换Primary和Secondary
对主Primary/Secondary模型的drbd服务来讲，在某个时刻只能有一个节点为Primary，因此，要切换两个节点的角色，只能在先将原有的Primary节点设置为Secondary后，才能原来的Secondary节点设置为Primary:
手工切换DRBD的步骤:
(1) 主节点 umount /dev/drbd0 卸载挂载
(2) 主节点 drbdadm secondary all 恢复从节点
(3) 备节点 drbdadm primary all 配置主节点
(4) 备节点 mount /dev/drbd0 /data 挂载
7. DRBD脑裂后的处理
当DRBD出现脑裂后，会导致drbd两边的磁盘不一致，处理方法如下：
在确定要作为从的节点上切换成secondary，并放弃该资源的数据：
drbdadm secondary all
drbdadm -- --discard-my-data connect all
重新同步数据:
drbdadm -- --overwrite-data-of-peer primary data
四、安装配置NFS
1. app1,app2节点配置nfs
# vi /etc/exports
/data 192.168.0.0/24(rw,no_root_squash)
2. app1,app2节点配置nfs
# service rpcbind start
# service nfs start
# chkconfig rpcbind on
# chkconfig nfs on
3. app1,app2节点配置nfs
# vi haresources
#app1 IPaddr::192.168.0.26/24/eth0:1
app1 IPaddr::192.168.0.26/24/eth0:1 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs
参数说明:
IPaddr::192.168.0.26/24/eth0:1 #虚拟IP地址
drbddisk::data #管理drbd资源
Filesystem::/dev/drbd0::/data::ext4 #挂载文件系统
nfs #nfs脚本
4. app1,app2配置nfs脚本
# vi /etc/ha.d/resource.d/nfs
killall -9 nfsd
/etc/init.d/nfs restart
exit 0
# chmod +x /etc/ha.d/resource.d/nfs
五、测试切换
1. 通过一台客户机挂载
[root@vm15 ~]# mount -t nfs 192.168.0.26:/data/ /mnt
[root@vm15 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 21G 4.6G 15G 24% /
/dev/sda1 99M 23M 72M 25% /boot
tmpfs 7.4G 0 7.4G 0% /dev/shm
/dev/mapper/vg-data 79G 71G 4.2G 95% /data
192.168.0.26:/data/ 9.9G 151M 9.2G 2% /mnt
[root@vm15 ~]#
2. 节点1上执行: service heartbeat stop 或 /usr/share/heartbeat/hb_standby
3. 观察日志情况
资源主节点：
# tail -f /var/log/message
Jan 22 15:46:01 app2 heartbeat: [8050]: info: app2 wants to go standby [all]
Jan 22 15:46:01 app2 heartbeat: [8050]: info: standby: app1 can take our all resources
Jan 22 15:46:01 app2 heartbeat: [9310]: info: give up all HA resources (standby).
Jan 22 15:46:01 app2 ResourceManager(default)[9323]: info: Releasing resource group: app1 IPaddr::192.168.0.26/24/eth0:1 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs
Jan 22 15:46:01 app2 ResourceManager(default)[9323]: info: Running /etc/ha.d/resource.d/nfs stop
Jan 22 15:46:01 app2 kernel: nfsd: last server has exited, flushing export cache
Jan 22 15:46:01 app2 rpc.mountd[9218]: Caught signal 15, un-registering and exiting.
Jan 22 15:46:02 app2 rpc.mountd[9452]: Version 1.2.3 starting
Jan 22 15:46:02 app2 kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Jan 22 15:46:02 app2 kernel: NFSD: starting 90-second grace period
Jan 22 15:46:02 app2 ResourceManager(default)[9323]: info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd0 /data ext4 stop
Jan 22 15:46:02 app2 Filesystem(Filesystem_/dev/drbd0)[9519]: INFO: Running stop for /dev/drbd0 on /data
Jan 22 15:46:02 app2 Filesystem(Filesystem_/dev/drbd0)[9519]: INFO: Trying to unmount /data
Jan 22 15:46:02 app2 Filesystem(Filesystem_/dev/drbd0)[9519]: INFO: unmounted /data successfully
Jan 22 15:46:02 app2 /usr/lib/ocf/resource.d//heartbeat/Filesystem(Filesystem_/dev/drbd0)[9511]: INFO: Success
Jan 22 15:46:02 app2 ResourceManager(default)[9323]: info: Running /etc/ha.d/resource.d/drbddisk data stop
Jan 22 15:46:02 app2 kernel: block drbd0: role( Primary -> Secondary )
Jan 22 15:46:02 app2 kernel: block drbd0: bitmap WRITE of 0 pages took 0 jiffies
Jan 22 15:46:02 app2 kernel: block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
Jan 22 15:46:02 app2 ResourceManager(default)[9323]: info: Running /etc/ha.d/resource.d/IPaddr 192.168.0.26/24/eth0:1 stop
Jan 22 15:46:02 app2 IPaddr(IPaddr_192.168.0.26)[9679]: INFO: IP status = ok, IP_CIP=
Jan 22 15:46:02 app2 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[9653]: INFO: Success
Jan 22 15:46:02 app2 heartbeat: [9310]: info: all HA resource release completed (standby).
Jan 22 15:46:02 app2 heartbeat: [8050]: info: Local standby process completed [all].
Jan 22 15:46:03 app2 kernel: block drbd0: peer( Secondary -> Primary )
Jan 22 15:46:04 app2 heartbeat: [8050]: WARN: 1 lost packet(s) for [app1] [5137:5139]
Jan 22 15:46:04 app2 heartbeat: [8050]: info: remote resource transition completed.
Jan 22 15:46:04 app2 heartbeat: [8050]: info: No pkts missing from app1!
Jan 22 15:46:04 app2 heartbeat: [8050]: info: Other node completed standby takeover of all resources.
资源从节点：
# tail -f /var/log/message
Jan 22 15:46:02 app1 heartbeat: [8622]: info: app2 wants to go standby [all]
Jan 22 15:46:03 app1 kernel: block drbd0: peer( Primary -> Secondary )
Jan 22 15:46:04 app1 heartbeat: [8622]: info: standby: acquire [all] resources from app2
Jan 22 15:46:04 app1 heartbeat: [9131]: info: acquire all HA resources (standby).
Jan 22 15:46:04 app1 ResourceManager(default)[9144]: info: Acquiring resource group: app1 IPaddr::192.168.0.26/24/eth0:1 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs
Jan 22 15:46:04 app1 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[9172]: INFO: Resource is stopped
Jan 22 15:46:04 app1 ResourceManager(default)[9144]: info: Running /etc/ha.d/resource.d/IPaddr 192.168.0.26/24/eth0:1 start
Jan 22 15:46:04 app1 IPaddr(IPaddr_192.168.0.26)[9303]: INFO: Adding inet address 192.168.0.26/24 with broadcast address 192.168.0.255 to device eth0 (with label eth0:1)
Jan 22 15:46:04 app1 IPaddr(IPaddr_192.168.0.26)[9303]: INFO: Bringing device eth0 up
Jan 22 15:46:04 app1 IPaddr(IPaddr_192.168.0.26)[9303]: INFO: /usr/libexec/heartbeat/send_arp -i 200 -r 5 -p /var/run/resource-agents/send_arp-192.168.0.26 eth0 192.168.0.26 auto not_used not_used
Jan 22 15:46:04 app1 /usr/lib/ocf/resource.d//heartbeat/IPaddr(IPaddr_192.168.0.26)[9277]: INFO: Success
Jan 22 15:46:04 app1 ResourceManager(default)[9144]: info: Running /etc/ha.d/resource.d/drbddisk data start
Jan 22 15:46:04 app1 kernel: block drbd0: role( Secondary -> Primary )
Jan 22 15:46:04 app1 /usr/lib/ocf/resource.d//heartbeat/Filesystem(Filesystem_/dev/drbd0)[9439]: INFO: Resource is stopped
Jan 22 15:46:04 app1 ResourceManager(default)[9144]: info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd0 /data ext4 start
Jan 22 15:46:04 app1 Filesystem(Filesystem_/dev/drbd0)[9529]: INFO: Running start for /dev/drbd0 on /data
Jan 22 15:46:04 app1 kernel: EXT4-fs (drbd0): mounted filesystem with ordered data mode. Opts:
Jan 22 15:46:04 app1 /usr/lib/ocf/resource.d//heartbeat/Filesystem(Filesystem_/dev/drbd0)[9518]: INFO: Success
Jan 22 15:46:04 app1 kernel: nfsd: last server has exited, flushing export cache
Jan 22 15:46:05 app1 rpc.mountd[9050]: Caught signal 15, un-registering and exiting.
Jan 22 15:46:05 app1 rpc.mountd[9698]: Version 1.2.3 starting
Jan 22 15:46:05 app1 kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Jan 22 15:46:05 app1 kernel: NFSD: starting 90-second grace period
Jan 22 15:46:05 app1 heartbeat: [9131]: info: all HA resource acquisition completed (standby).
Jan 22 15:46:05 app1 heartbeat: [8622]: info: Standby resource acquisition done [all].
Jan 22 15:46:05 app1 heartbeat: [8622]: info: remote resource transition completed.
[root@app1 resource.d]# ip a
1: lo:
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0:
link/ether 00:0c:29:03:c8:10 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.24/24 brd 192.168.0.255 scope global eth0
inet 192.168.0.26/24 brd 192.168.0.255 scope global secondary eth0:1
inet6 fe80::20c:29ff:fe03:c810/64 scope link
valid_lft forever preferred_lft forever
3: eth1:
link/ether 00:0c:29:03:c8:1a brd ff:ff:ff:ff:ff:ff
inet 10.10.10.24/24 brd 10.10.10.255 scope global eth1
inet6 fe80::20c:29ff:fe03:c81a/64 scope link
valid_lft forever preferred_lft forever
[root@app1 resource.d]# cat /proc/drbd
version: 8.4.3 (api:1/proto:86-101)
GIT-hash: 89a294209144b68adb3ee85a73221f964d3ee515 build by gardner@, 2013-11-29 12:28:00
0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:628 nr:16 dw:644 dr:2968 al:5 bm:7 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0
[root@app1 resource.d]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_app1-lv_root 36G 3.7G 30G 11% /
tmpfs 1004M 68K 1004M 1% /dev/shm
/dev/sda1 485M 39M 421M 9% /boot
/dev/drbd0 9.9G 151M 9.2G 2% /data
[root@app1 resource.d]#
六，关于Heartbeat+DRBD+方案进一步思考
Heartbeat+DRBD+方案可以实现NFS,MySQL等比较精典的方案，实现方式类似，围绕着Heartbeat、DRBD还有很多的基于主备实用方案。
如果用于生产环境确实还需要对DRBD进行很好的监控，以及加强对DRBD相对技术的进一步测试与实现，加深对DRBD的理解。
下一步继续测试DRBD数据迁移、基于heartbeat+共享存储、双主等热备方案都有很大实用价值。