JVM GC Collector

阅读更多

FROM: https://blogs.oracle.com/jonthecollector/our-collectors

 

I drew this diagram on a white board for some customers recently. They seemed to
like it (or were just being very polite) so I thought I redraw it for your
amusement.

Each blue box represents a collector that is used to collect a generation. The 
young generation is collected by the blue boxes in the yellow region and
the tenured generation is collected by the blue boxes in the gray region.

 

• 
  "Serial" is a stop-the-world, copying collector which uses a single GC thread.
• 
  "ParNew" is a stop-the-world, copying collector which uses multiple GC threads. It differs
  from "Parallel Scavenge" in that it has enhancements that make it usable 
  with CMS. For example, "ParNew" does the
  synchronization needed so that it can run during the 
  concurrent phases of CMS.
• 
  "Parallel Scavenge" is a stop-the-world, copying collector 
  which uses multiple GC threads.
• 
  "Serial Old" is a stop-the-world,
  mark-sweep-compact collector that uses a single GC thread.
• 
  "CMS" is a mostly concurrent, low-pause collector.
• 
  "Parallel Old" is a compacting collector that uses multiple GC threads.
  

  Using the -XX flags for our collectors for jdk6,

   

• 
  UseSerialGC is "Serial" + "Serial Old"
• 
  UseParNewGC is "ParNew" + "Serial Old"
• 
  UseConcMarkSweepGC is "ParNew" + "CMS" + "Serial Old". "CMS" is used most of the time to collect the tenured generation. "Serial Old" is used when a concurrent mode failure occurs.
• 
  UseParallelGC is "Parallel Scavenge" + "Serial Old"
• 
  UseParallelOldGC is "Parallel Scavenge" + "Parallel Old"
  

  FAQ

  1) UseParNew and UseParallelGC both collect the young generation using
  multiple GC threads. Which is faster?

  There's no one correct answer for
  this questions. Mostly they perform equally well, but I've seen one
  do better than the other in different situations. If you want to use
  GC ergonomics, it is only supported by UseParallelGC (and UseParallelOldGC)
  so that's what you'll have to use.

  2) Why doesn't "ParNew" and "Parallel Old" work together?

  "ParNew" is written in
  a style where each generation being collected offers certain interfaces for its
  collection. For example, "ParNew" (and "Serial") implements
  space_iterate() which will apply an operation to every object
  in the young generation. When collecting the tenured generation with
  either "CMS" or "Serial Old", the GC can use space_iterate() to 
  do some work on the objects in the young generation. 
  This makes the mix-and-match of collectors work but adds some burden
  to the maintenance of the collectors and to the addition of new
  collectors. And the burden seems to be quadratic in the number
  of collectors.
  Alternatively, "Parallel Scavenge"
  (at least with its initial implementation before "Parallel Old")
  always knew how the tenured generation was being collected and
  could call directly into the code in the "Serial Old" collector.
  "Parallel Old" is not written in the "ParNew" style so matching it with
  "ParNew" doesn't just happen without significant work.
  By the way, we would like to match "Parallel Scavenge" only with
  "Parallel Old" eventually and clean up any of the ad hoc code needed
  for "Parallel Scavenge" to work with both.

  Please don't think too much about the examples I used above. They
  are admittedly contrived and not worth your time.

  3) How do I use "CMS" with "Serial"?

  -XX:+UseConcMarkSweepGC -XX:-UseParNewGC.
  Don't use -XX:+UseConcMarkSweepGC and -XX:+UseSerialGC. Although that's seems like 
  a logical combination, it will result in a message saying something about 
  conflicting collector combinations and the JVM won't start. Sorry about that.
  Our bad.

  4) Is the blue box with the "?" a typo?

  That box represents the new garbage collector that we're currently developing called
  Garbage First or G1 for short. G1 will provide

• 
  More predictable GC pauses
• 
  Better GC ergonomics
• 
  Low pauses without fragmentation
• 
  Parallelism and concurrency in collections
• 
  Better heap utilization
  

  G1 straddles the young generation - tenured generation boundary because it is
  a generational collector only in the logical sense. G1 divides the
  heap into regions and during a GC can collect a subset of the regions.
  It is logically generational because it dynamically selects a set of
  regions to act as a young generation which will then be collected at
  the next GC (as the young generation would be).

  The user can specify a goal for the pauses and G1 
  will do an estimate (based on past collections) of how many 
  regions can be collected in that time (the pause goal). 
  That set of regions is called a collection set and G1 will
  collect it during the next GC.

  G1 can choose the regions with the most garbage to collect first (Garbage First, get it?)
  so gets the biggest bang for the collection buck.

  G1 compacts so fragmentation is much less a problem. Why is it a problem at all?
  There can be internal fragmentation due to partially filled regions.

  The heap is not statically divided into 
  a young generation and a tenured generation so the problem of
  an imbalance in their sizes is not there.

  Along with a pause time goal the user can specify a goal on the fraction of
  time that can be spent on GC during some period (e.g., during the next 100 seconds
  don't spend more than 10 seconds collecting). For such goals (10 seconds of
  GC in a 100 second period) G1 can choose a collection set that it expects it can collect in 10 seconds and schedules the collection 90 seconds (or more) from the previous collection. You can see how an evil user could specify 0 collection
  time in the next century so again, this is just a goal, 
  not a promise.

  If G1 works out as we expect, it will become our low-pause collector in place of 
  "ParNew" + "CMS". And if you're about to ask when will it be ready, please don't
  be offended by my dead silence. It's the highest priority project for our team,
  but it is software development so there are the usual unknowns. It will be out
  by JDK7. The sooner the better as far as we're concerned.

  Updated February 4. Yes, I can edit an already posted blog. Here's
  a reference to the G1 paper if you have ACM portal access.

  http://portal.acm.org/citation.cfm?id=1029879