师从小白

Qt5.6.0配置帮助

+ cd qtbase
+ D:\Project\FrameProject\qtcode5.6.0\qtbase\configure.bat -top-level -help
Usage: configure [options]

Installation options:

These are optional, but you may specify install directories.

-prefix

...... The deployment directory, as seen on the target
device.
(default %CD%)

-extprefix

... The installation directory, as seen on the host
machine.
(default SYSROOT/PREFIX)

-hostprefix [dir] .. The installation directory for build tools running on
the
host machine. If [dir] is not given, the current build
directory will be used. (default EXTPREFIX)

You may use these to change the layout of the install. Note that all
directories
except -sysconfdir should be located under -prefix/-hostprefix:

-bindir

...... User executables will be installed to
(default PREFIX/bin)
-libdir ...... Libraries will be installed to
(default PREFIX/lib)
-headerdir ... Headers will be installed to
(default PREFIX/include)
-archdatadir . Architecture-dependent data used by Qt will be
installed to
(default PREFIX)
-libexecdir .. Program executables will be installed to
(default ARCHDATADIR/bin)
-plugindir ... Plugins will be installed to
(default ARCHDATADIR/plugins)
-importdir ... Imports for QML1 will be installed to
(default ARCHDATADIR/imports)
-qmldir ...... Imports for QML2 will be installed to
(default ARCHDATADIR/qml)
-datadir ..... Data used by Qt programs will be installed to
(default PREFIX)
-docdir ...... Documentation will be installed to
(default DATADIR/doc)
-translationdir Translations of Qt programs will be installed to

(default DATADIR/translations)
-examplesdir . Examples will be installed to
(default PREFIX/examples)
-testsdir .... Tests will be installed to
(default PREFIX/tests)

-hostbindir

.. Host executables will be installed to
(default HOSTPREFIX/bin)
-hostlibdir .. Host libraries will be installed to
(default HOSTPREFIX/lib)
-hostdatadir . Data used by qmake will be installed to
(default HOSTPREFIX)

Configure options:

The defaults (*) are usually acceptable. A plus (+) denotes a default value
that needs to be evaluated. If the evaluation succeeds, the feature is
included. Here is a short explanation of each option:

-release ........... Compile and link Qt with debugging turned off.
* -debug ............. Compile and link Qt with debugging turned on.
+ -debug-and-release . Compile and link two Qt libraries, with and without
debugging turned on.

-force-debug-info .. Create symbol files for release builds.
-separate-debug-info Strip debug information into a separate file.

-developer-build ... Compile and link Qt with Qt developer options
(including auto-tests exporting)

-optimized-tools ... Build optimized host tools even in debug build.
-no-optimized-tools Do not build optimized host tools even in debug build.

-opensource ........ Compile and link the Open-Source Edition of Qt.
-commercial ........ Compile and link the Commercial Edition of Qt.

-c++std .. Compile Qt with C++ standard edition (c++98, c++11,
c++14, c++1z)
Default: highest supported. This option is not
supported for MSVC.

-use-gold-linker ... Link using the GNU gold linker (gcc only).
* -no-use-gold-linker Do not link using the GNU gold linker.

-enable-new-dtags .. Use new DTAGS for RPATH (Linux only).
* -disable-new-dtags . Do not use new DTAGS for RPATH.

* -shared ............ Create and use shared Qt libraries.
-static ............ Create and use static Qt libraries.

* -static-runtime .... Statically link the C/C++ runtime library.

-ltcg .............. Use Link Time Code Generation. (Release builds only)
* -no-ltcg ........... Do not use Link Time Code Generation.

-make ....... Add part to the list of parts to be built at make time
libs
tools
examples
-nomake ..... Exclude part from the list of parts to be built.

-skip ..... Exclude an entire module from the build.

-no-compile-examples Install only the sources of examples.

-no-widgets ........ Disable Qt Widgets module.

-no-gui ............ Disable Qt GUI module.

-no-accessibility .. Disable accessibility support.

................... Disabling accessibility is not recommended, as it will
break QStyle
and may break other internal parts of Qt.
With this switch you create a source incompatible
version of Qt,
which is unsupported.

* -accessibility ..... Enable accessibility support.

-no-sql- ... Disable SQL entirely, by default none are
turned on.
-qt-sql- ... Enable a SQL in the Qt Library.
-plugin-sql- Enable SQL as a plugin to be linked to at run
time.
Available values for :
mysql
psql
oci
odbc
tds
db2
+ sqlite
sqlite2
ibase
(drivers marked with a '+' have been detected as
available on this system)

-system-sqlite ..... Use sqlite from the operating system.

-no-opengl ......... Do not support OpenGL.
-opengl ...... Enable OpenGL support with specified API version.
Available values for :
desktop - Enable support for Desktop OpenGL
dynamic - Enable support for dynamically loaded
OpenGL (either desktop or ES)
* es2 - Enable support for OpenGL ES 2.0

* -no-openvg ......... Disables OpenVG functionality.
-openvg ............ Enables OpenVG functionality.

-force-asserts ..... Activate asserts in release mode.

-platform ... The operating system and compiler you are building on.
(default %QMAKESPEC%)

-xplatform .. The operating system and compiler you are cross
compiling to.

See the README file for a list of supported operating
systems and compilers.

-target ............ Set target OS version. Currently the only valid value
is 'xp' for targeting Windows XP.
MSVC >= 2012 targets Windows Vista by default.

-sysroot

..... Sets as the target compiler's and qmake's
sysroot and also sets pkg-config paths.
-no-gcc-sysroot .... When using -sysroot, it disables the passing of
--sysroot to the compiler.

-qconfig ... Use src/corelib/global/qconfig-.h rather than
the
default 'full'.

* -no-nis ............ Do not compile NIS support.
-nis ............... Compile NIS support.

-no-iconv .......... Do not enable support for iconv(3).
+ -iconv ............. Enable support for iconv(3).
+ -sun-iconv ......... Enable support for iconv(3) using sun-iconv.
+ -gnu-iconv ......... Enable support for iconv(3) using gnu-libiconv.

-no-evdev .......... Do not enable support for evdev.
+ -evdev ............. Enable support for evdev.
-no-mtdev .......... Do not enable support for mtdev.
+ -mtdev ............. Enable support for mtdev.
+ -inotify ........... Explicitly enable Qt inotify(7) support.
-no-inotify ........ Explicitly disable Qt inotify(7) support.

+ -eventfd ........... Enable eventfd(7) support in the UNIX event loop.
-no-eventfd ........ Disable eventfd(7) support in the UNIX event loop.

* -largefile ......... Enables Qt to access files larger than 4 GB.

-posix-ipc ......... Enable POSIX IPC.

-glib .............. Compile Glib support.

-sysconfdir

.. Settings used by Qt programs will be looked for in
.

-system-proxies .... Use system network proxies by default.
* -no-system-proxies . Do not use system network proxies by default.

+ -warnings-are-errors Make warnings be treated as errors.
-no-warnings-are-errors Make warnings be treated normally.
-qtnamespace Wraps all Qt library code in 'namespace name {...}'.
-qtlibinfix Renames all Qt* libs to Qt*.

-D ........ Add an explicit define to the preprocessor.
-I ... Add an explicit include path.
-L ... Add an explicit library path.
-l ... Add an explicit library name, residing in a
librarypath.

-help, -h, -? ...... Display this information.

Third Party Libraries:

-qt-zlib ........... Use the zlib bundled with Qt.
+ -system-zlib ....... Use zlib from the operating system.
See http://www.gzip.org/zlib

-qt-pcre ........... Use the PCRE library bundled with Qt.
+ -system-pcre ....... Use the PCRE library from the operating system.
See http://pcre.org/

-icu ............... Use the ICU library.
* -no-icu ............ Do not use the ICU library.
See http://site.icu-project.org/

-no-gif ............ Do not compile GIF reading support.

-no-libpng ......... Do not compile PNG support.
-qt-libpng ......... Use the libpng bundled with Qt.
+ -system-libpng ..... Use libpng from the operating system.
See http://www.libpng.org/pub/png

-no-libjpeg ........ Do not compile JPEG support.
-qt-libjpeg ........ Use the libjpeg bundled with Qt.
+ -system-libjpeg .... Use libjpeg from the operating system.
See http://www.ijg.org

-no-freetype ....... Do not compile in Freetype2 support.
* -qt-freetype ....... Use the libfreetype bundled with Qt.
-system-freetype ... Use the libfreetype provided by the system.

-fontconfig ........ Build with FontConfig support.
* -no-fontconfig ..... Do not build with FontConfig support.

-no-harfbuzz ....... Do not compile in HarfBuzz-NG support.
* -qt-harfbuzz ....... Use HarfBuzz-NG bundled with Qt to do text shaping.
It can still be disabled by setting
the QT_HARFBUZZ environment variable to "old".
-system-harfbuzz ... Use HarfBuzz-NG from the operating system
to do text shaping. It can still be disabled
by setting the QT_HARFBUZZ environment variable to
"old".
See http://www.harfbuzz.org

+ -angle ............. Use the ANGLE implementation of OpenGL ES 2.0.
-no-angle .......... Do not use ANGLE.
See http://code.google.com/p/angleproject/

Qt for Windows only:

-no-incredibuild-xge Do not add IncrediBuild XGE distribution commands to
custom build steps.
+ -incredibuild-xge .. Add IncrediBuild XGE distribution commands to custom
build steps. This will distribute MOC and UIC steps,
and other custom buildsteps which are added to the
INCREDIBUILD_XGE variable.
(The IncrediBuild distribution commands are only added
to Visual Studio projects)

* -no-plugin-manifests Do not embed manifests in plugins.
-plugin-manifests .. Embed manifests in plugins.

-no-qmake .......... Do not compile qmake.
* -qmake ............. Compile qmake.

-qreal [double|float] typedef qreal to the specified type. The default is
double.
Note that changing this flag affects binary
compatibility.

-no-rtti ........... Do not compile runtime type information.
* -rtti .............. Compile runtime type information.
-no-strip .......... Do not strip libraries and executables of debug info
when installing.
* -strip ............. Strip libraries and executables of debug info when
installing.

-no-sse2 ........... Do not compile with use of SSE2 instructions.
+ -sse2 .............. Compile with use of SSE2 instructions.
-no-sse3 ........... Do not compile with use of SSE3 instructions.
+ -sse3 .............. Compile with use of SSE3 instructions.
-no-ssse3 .......... Do not compile with use of SSSE3 instructions.
+ -ssse3 ............. Compile with use of SSSE3 instructions.
-no-sse4.1 ......... Do not compile with use of SSE4.1 instructions.
+ -sse4.1 ............ Compile with use of SSE4.1 instructions.
-no-sse4.2 ......... Do not compile with use of SSE4.2 instructions.
+ -sse4.2 ............ Compile with use of SSE4.2 instructions.
-no-avx ............ Do not compile with use of AVX instructions.
+ -avx ............... Compile with use of AVX instructions.
-no-avx2 ........... Do not compile with use of AVX2 instructions.
+ -avx2 .............. Compile with use of AVX2 instructions.

-no-ssl ............ Do not compile support for SSL.
+ -ssl ............... Enable run-time SSL support.
-no-openssl ........ Do not compile support for OpenSSL.
+ -openssl ........... Enable run-time OpenSSL support.
-openssl-linked .... Enable linked OpenSSL support.

-no-libproxy ....... Do not compile in libproxy support.
+ -libproxy .......... Compile in libproxy support (for cross compilation
targets).

-no-dbus ........... Do not compile in D-Bus support.
-dbus-linked ....... Compile in D-Bus support and link to libdbus-1.

-dbus-runtime ...... Compile in D-Bus support and load libdbus-1
dynamically.
-no-audio-backend .. Do not compile in the platform audio backend into
Qt Multimedia.
+ -audio-backend ..... Compile in the platform audio backend into Qt
Multimedia.

* -no-wmf-backend .... Do not compile in the windows media foundation backend
into Qt Multimedia.
-wmf-backend ....... Compile in the windows media foundation backend into
Qt Multimedia.

-no-qml-debug ...... Do not build the in-process QML debugging support.
* -qml-debug ......... Build the in-process QML debugging support.

-no-directwrite .... Do not build support for DirectWrite font rendering.
+ -directwrite ....... Build support for DirectWrite font rendering.

* -no-direct2d ....... Do not build the Direct2D platform plugin.
-direct2d .......... Build the Direct2D platform plugin (experimental,
requires Direct2D availability on target systems,
e.g. Windows 7 with Platform Update, Windows 8, etc.)

-no-style-