2019年3月6日：出版安装kubeadmin部署k8s集群教程
本次安装采用kubeadmin ！
安装的k8s版本为1.13.3版，是当前最新版本！
本篇文章，所使用的任何镜像和yaml我都会发一个网盘链接，供大家下载学习！
链接:https://pan.baidu.com/s/1kk3Q... 密码:mlyo
github：https://github.com/heyangguang
有任何问题可以直接联系我的Email：[email protected]
主机列表：
系统采用的是Centos7.5
| 主机名 | IP地址 | 角色 |
|---|---|---|
| k8smaster | 9.186.137.114 | master |
| k8snode-1 | 9.186.137.115 | node |
| k8snode-2 | 9.186.137.116 | node |
基础环境准备：
关闭防火墙、关闭selinux，关闭swap，关闭网卡管理器。
k8smaster:
[root@k8smaster ~]# systemctl stop firewalld
[root@k8smaster ~]# systemctl disable firewalld
[root@k8smaster ~]# systemctl stop NetworkManager ; systemctl disable NetworkManager
[root@k8smaster ~]# vim /etc/selinux/config
[root@k8smaster ~]# scp /etc/selinux/config root@k8snode-1:/etc/selinux/config
config 100% 546 1.1MB/s 00:00
[root@k8smaster ~]# scp /etc/selinux/config root@k8snode-2:/etc/selinux/config
config 100% 546 1.3MB/s 00:00
[root@k8smaster ~]# swapoff -a
[root@k8smaster ~]# vim /etc/fstab
[root@k8smaster ~]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Mar 4 17:23:04 2019
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/centos-root / xfs defaults 0 0
UUID=3dd5660e-0905-4f1e-9fa3-9ce664d6eb94 /boot xfs defaults 0 0
/dev/mapper/centos-home /home xfs defaults 0 0
#/dev/mapper/centos-swap swap swap defaults 0 0
k8snode-1:
[root@k8snode-1 ~]# systemctl stop firewalld
[root@k8snode-1 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@k8snode-1 ~]# systemctl stop NetworkManager ; systemctl disable NetworkManager
[root@k8snode-1 ~]# swapoff -a
[root@k8snode-1 ~]# vim /etc/fstab
k8snode-2:
[root@k8snode-2 ~]# systemctl stop firewalld
[root@k8snode-2 ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@k8snode-2 ~]# swapoff -a
[root@k8snode-2 ~]# systemctl stop NetworkManager ; systemctl disable NetworkManager
[root@k8snode-2 ~]# vim /etc/fstabyum源配置：
需要k8snode-1和k8snode-2先操作，在把yum源copy过去。
k8smaster:
[root@k8smaster yum.repos.d]# rm -rf *
[root@k8smaster yum.repos.d]# ll
总用量 12
-rw-r--r-- 1 root root 2206 3月 5 18:50 CentOS-Base.repo
-rw-r--r-- 1 root root 923 3月 5 18:50 epel.repo
-rw-r--r-- 1 root root 276 3月 5 18:50 k8s.repo
[root@k8smaster yum.repos.d]# scp * k8snode-1:/etc/yum.
scp: /etc/yum.: No such file or directory
[root@k8smaster yum.repos.d]# scp * k8snode-1:/etc/yum.repos.d/
CentOS-Base.repo 100% 2206 352.0KB/s 00:00
epel.repo 100% 923 160.8KB/s 00:00
k8s.repo 100% 276 48.2KB/s 00:00
[root@k8smaster yum.repos.d]# scp * k8snode-2:/etc/yum.repos.d/
CentOS-Base.repo 100% 2206 216.3KB/s 00:00
epel.repo 100% 923 157.1KB/s 00:00
k8s.repo 100% 276 47.5KB/s 00:00
k8snode-1:
[root@k8snode-1 ~]# cd /etc/yum.repos.d/
[root@k8snode-1 yum.repos.d]# rm -rf *
k8snode-2:
[root@k8snode-2 ~]# rm -rf /etc/yum.repos.d/*安装Docker引擎：
k8smaster：
[root@k8smaster yum.repos.d]# yum -y install docker
[root@k8smaster yum.repos.d]# systemctl start docker ; systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
k8snode-1：
[root@k8snode-1 yum.repos.d]# yum -y install docker
[root@k8snode-1 yum.repos.d]# systemctl start docker ; systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
k8snode-2：
[root@k8snode-2 ~]# yum -y install docker
[root@k8snode-2 ~]# systemctl start docker ; systemctl enable docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.设置k8s相关系统内核参数：
k8smaster:
[root@k8smaster ~]# cat << EOF > /etc/sysctl.d/k8s.conf
> net.bridge.bridege-nf-call-iptables = 1
> net.bridge.bridege-nf-call-ip6tables = 1
> EOF
[root@k8smaster ~]# sysctl -p
k8snode-1:
[root@k8snode-1 ~]# cat << EOF > /etc/sysctl.d/k8s.conf
> net.bridge.bridege-nf-call-iptables = 1
> net.bridge.bridege-nf-call-ip6tables = 1
> EOF
[root@k8snode-1 ~]# sysctl -p
k8snode-2:
[root@k8snode-2 ~]# cat << EOF > /etc/sysctl.d/k8s.conf
> net.bridge.bridege-nf-call-iptables = 1
> net.bridge.bridege-nf-call-ip6tables = 1
> EOF
[root@k8snode-2 ~]# sysctl -p安装kubernetes相关组件：
k8smaster:
[root@k8smaster ~]# yum install -y kubelet-1.13.3 kubeadm-1.11.1 kubectl-1.13.3 --disableexcludes=kubernetes
[root@k8smaster ~]# systemctl start kubelet ; systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /etc/systemd/system/kubelet.service.
k8snode-1:
[root@k8snode-1 ~]# yum install -y kubelet-1.13.3 kubeadm-1.11.1 kubectl-1.13.3 --disableexcludes=kubernetes
[root@k8snode-1 ~]# systemctl start kubelet ; systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /etc/systemd/system/kubelet.service.
k8snode-2:
[root@k8snode-2 ~]# yum install -y kubelet-1.13.3 kubeadm-1.11.1 kubectl-1.13.3 --disableexcludes=kubernetes
[root@k8snode-2 ~]# systemctl start kubelet ; systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /etc/systemd/system/kubelet.service.导入所需要的镜像：
为什么要导入镜像呢？因为kubeadmin会去谷歌的镜像源上面下载，大家都懂得！所以我下载下来，使用的时候直接导入就好了。
所需要的镜像：
k8s.gcr.io/kube-apiserver:v1.13.3
k8s.gcr.io/kube-controller-manager:v1.13.3
k8s.gcr.io/kube-scheduler:v1.13.3
k8s.gcr.io/kube-proxy:v1.13.3
k8s.gcr.io/etcd:3.2.24
k8s.gcr.io/coredns:1.2.6
k8s.gcr.io/pause:3.1
这里所用到的镜像，我会全部打包到我的github上，需要的可以去下载。
导入方式相同，只需要全部导入即可！
k8smaster:
[root@k8smaster ~]# ls
anaconda-ks.cfg images.tar
[root@k8smaster ~]# ll
总用量 1834184
-rw-------. 1 root root 1245 3月 4 17:27 anaconda-ks.cfg
-rw-r--r--. 1 root root 1878197248 3月 5 18:31 images.tar
[root@k8smaster ~]# docker load < images.tar
k8snode-1:
[root@k8snode-1 ~]# ls
anaconda-ks.cfg images.tar
[root@k8snode-1 ~]# docker load < images.tar
k8snode-2:
[root@k8snode-2 ~]# ls
anaconda-ks.cfg images.tar
[root@k8snode-2 ~]# docker load < images.tarmaster上初始化kubeadmin生成node token：
使用kubeadm init 初始化环境，--kubernetes-version指定版本，-pod-network-cidr指定虚拟网络的网段，可以随便指定任何网段！
[root@k8smaster ~]# kubeadm init --kubernetes-version=v1.13.3 --pod-network-cidr=10.244.0.0/16
[init] using Kubernetes version: v1.13.3
[preflight] running pre-flight checks
[WARNING KubernetesVersion]: kubernetes version is greater than kubeadm version. Please consider to upgrade kubeadm. kubernetes version: 1.13.3. Kubeadm version: 1.11.x
I0305 19:49:27.250624 5373 kernel_validator.go:81] Validating kernel version
I0305 19:49:27.250718 5373 kernel_validator.go:96] Validating kernel config
[preflight/images] Pulling images required for setting up a Kubernetes cluster
[preflight/images] This might take a minute or two, depending on the speed of your internet connection
[preflight/images] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[preflight] Activating the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [k8smaster kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 9.186.137.114]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [k8smaster localhost] and IPs [127.0.0.1 ::1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [k8smaster localhost] and IPs [9.186.137.114 127.0.0.1 ::1]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests"
[init] this might take a minute or longer if the control plane images have to be pulled
[apiclient] All control plane components are healthy after 19.502118 seconds
[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.13" in namespace kube-system with the configuration for the kubelets in the cluster
[markmaster] Marking the node k8smaster as master by adding the label "node-role.kubernetes.io/master=''"
[markmaster] Marking the node k8smaster as master by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8smaster" as an annotation
[bootstraptoken] using token: xjzf96.nv0qhqwj9j47r1tv
[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 9.186.137.114:6443 --token xjzf96.nv0qhqwj9j47r1tv --discovery-token-ca-cert-hash sha256:e386175a5cae597dec6bfeb7c92d01bc5fe052313b50dc48e419057c8c3f824c
[root@k8smaster ~]# mkdir -p $HOME/.kube
[root@k8smaster ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8smaster ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/confignode节点执行kubeadm join加入集群：
注意！一定要时间同步，否则就会出问题！
报这个错误：
[discovery] Failed to request cluster info, will try again: [Get https://9.186.137.114:6443/api/v1/namespaces/kube-public/configmaps/cluster-info: x509: certificate has expired or is not yet valid]
k8snode-1:
[root@k8snode-1 ~]# kubeadm join 9.186.137.114:6443 --token xjzf96.nv0qhqwj9j47r1tv --discovery-token-ca-cert-hash sha256:e386175a5cae597dec6bfeb7c92d01bc5fe052313b50dc48e419057c8c3f824c
[preflight] running pre-flight checks
[WARNING RequiredIPVSKernelModulesAvailable]: the IPVS proxier will not be used, because the following required kernel modules are not loaded: [ip_vs ip_vs_rr ip_vs_wrr ip_vs_sh] or no builtin kernel ipvs support: map[ip_vs:{} ip_vs_rr:{} ip_vs_wrr:{} ip_vs_sh:{} nf_conntrack_ipv4:{}]
you can solve this problem with following methods:
1. Run 'modprobe -- ' to load missing kernel modules;
2. Provide the missing builtin kernel ipvs support
I0305 20:02:24.453910 5983 kernel_validator.go:81] Validating kernel version
I0305 20:02:24.454026 5983 kernel_validator.go:96] Validating kernel config
[discovery] Trying to connect to API Server "9.186.137.114:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://9.186.137.114:6443"
[discovery] Requesting info from "https://9.186.137.114:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "9.186.137.114:6443"
[discovery] Successfully established connection with API Server "9.186.137.114:6443"
[kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.13" ConfigMap in the kube-system namespace
[kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[preflight] Activating the kubelet service
[tlsbootstrap] Waiting for the kubelet to perform the TLS Bootstrap...
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8snode-1" as an annotation
This node has joined the cluster:
* Certificate signing request was sent to master and a response
was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the master to see this node join the cluster.
k8snode-2:
[root@k8snode-2 ~]# kubeadm join 9.186.137.114:6443 --token xjzf96.nv0qhqwj9j47r1tv --discovery-token-ca-cert-hash sha256:e386175a5cae597dec6bfeb7c92d01bc5fe052313b50dc48e419057c8c3f824c
[preflight] running pre-flight checks
[WARNING RequiredIPVSKernelModulesAvailable]: the IPVS proxier will not be used, because the following required kernel modules are not loaded: [ip_vs_rr ip_vs_wrr ip_vs_sh ip_vs] or no builtin kernel ipvs support: map[ip_vs:{} ip_vs_rr:{} ip_vs_wrr:{} ip_vs_sh:{} nf_conntrack_ipv4:{}]
you can solve this problem with following methods:
1. Run 'modprobe -- ' to load missing kernel modules;
2. Provide the missing builtin kernel ipvs support
I0305 19:51:39.452856 5036 kernel_validator.go:81] Validating kernel version
I0305 19:51:39.452954 5036 kernel_validator.go:96] Validating kernel config
[discovery] Trying to connect to API Server "9.186.137.114:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://9.186.137.114:6443"
[discovery] Requesting info from "https://9.186.137.114:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "9.186.137.114:6443"
[discovery] Successfully established connection with API Server "9.186.137.114:6443"
[kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.13" ConfigMap in the kube-system namespace
[kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[preflight] Activating the kubelet service
[tlsbootstrap] Waiting for the kubelet to perform the TLS Bootstrap...
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8snode-2" as an annotation
This node has joined the cluster:
* Certificate signing request was sent to master and a response
was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the master to see this node join the cluster.安装Flannel网络：
k8smaster:
[root@k8smaster ~]# kubectl apply -f kube-flannel.yml
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.extensions/kube-flannel-ds-amd64 created
daemonset.extensions/kube-flannel-ds-arm64 created
daemonset.extensions/kube-flannel-ds-arm created
daemonset.extensions/kube-flannel-ds-ppc64le created
daemonset.extensions/kube-flannel-ds-s390x created查看K8S集群状态：
k8smaster:
[root@k8smaster ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-86c58d9df4-kmfct 1/1 Running 0 8m26s
coredns-86c58d9df4-qn2k2 1/1 Running 0 8m26s
etcd-k8smaster 1/1 Running 0 8m35s
kube-apiserver-k8smaster 1/1 Running 1 8m10s
kube-controller-manager-k8smaster 1/1 Running 0 7m43s
kube-flannel-ds-amd64-9rmfz 1/1 Running 0 5m9s
kube-flannel-ds-amd64-vnwtf 1/1 Running 0 12s
kube-flannel-ds-amd64-x7q4s 1/1 Running 0 51s
kube-proxy-7zl9n 1/1 Running 0 7m31s
kube-proxy-t2sx9 1/1 Running 0 8m27s
kube-proxy-txsfr 1/1 Running 0 7m27s
kube-scheduler-k8smaster 1/1 Running 0 8m56s到这里kubeadmin就部署完毕k8s集群了！
希望大家可以给我指出问题，我们一起前进！
谢谢大家！