主/备模式高可用keepalived+{nginx(proxy)|lvs}

两台主机:httpd+php+Discuz!+phpMyAdmin

一台主机:memcached用来缓存php的session;

一台主机:mysql-server或mariadb-server;

实验规划:

这里我规划用备用模式高可用两台keepalived+nginx(proxy)服务器作为前端代理,两台主机httpd+php+MariaDB+Discuz作为后端真实机,memcached放在第一台director上用来缓存php的session,最后用一台ansible主机实现对所有主机的部署调用。

ansible主机:172.16.1.7

director1(nginx+keepalived+memcached):172.16.1.10,虚拟ip:172.16.1.100

director2(nginx+keepalived):172.16.1.5

RS1(Apache+php+MariaDB):172.16.1.3

RS2(Apache+php+MariaDB):172.16.1.6

拓扑图如下:

f678443a34ae6ce1cb5a54e507f93c03.png

注意:

1.把所有节点的防火墙和SElinux关闭,避免对实验干扰。

2.同步所有节点的时间。

当部署完所有的应用后,生成如下所以的文件和子文件。
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69

[root@zj07 ansible]# tree
.
├── ansible.cfg
├── files
│ └── nginx.conf
├── hosts
├── playbooks
│ ├── amp.yml
│ ├── first.retry
│ ├── first.yml
│ ├── ngx.retry
│ └── ngx.yml
├── roles
│ ├── amp
│ │ ├── default
│ │ ├── files
│ │ │ └── db.sh
│ │ ├── handlers
│ │ ├── tasks
│ │ │ └── main.yml
│ │ ├── templates
│ │ └── vars
│ ├── keepalived
│ │ ├── default
│ │ ├── files
│ │ ├── handlers
│ │ │ └── main.yml
│ │ ├── tasks
│ │ │ └── main.yml
│ │ ├── templates
│ │ │ └── keepalived.conf.j2
│ │ └── vars
│ ├── memcached
│ │ ├── default
│ │ ├── files
│ │ │ └── Discuz_X3.2_SC_UTF8.zip
│ │ ├── handlers
│ │ │ └── main.yml
│ │ ├── tasks
│ │ │ └── main.yml
│ │ ├── templates
│ │ │ ├── php.ini.j2
│ │ │ └── sessstore.php.j2
│ │ └── vars
│ ├── memcached1
│ │ ├── default
│ │ ├── files
│ │ ├── handlers
│ │ ├── tasks
│ │ │ └── main.yml
│ │ ├── templates
│ │ └── vars
│ └── nginx
│ ├── default
│ ├── files
│ │ ├── default.conf.j2
│ │ └── ip_forward.sh
│ ├── handlers
│ │ └── main.yml
│ ├── tasks
│ │ └── main.yml
│ ├── templates
│ │ ├── nginx.conf.j2
│ │ └── nginx.repo.j2
│ └── vars
├── zrs.retry
└── zrs.yml

36 directories, 29 files

下面开始部署


配置ansible主机

1.yum -y install ansible

2.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

vim /etc/ansible/hosts
[knsrvs]
172.16.1.10 STATE=MASTER PRI=100
172.16.1.5 STATE=BACKUP PRI=98

[websrvs]
172.16.1.3
172.16.1.6

[memcached1]
172.16.1.10

[memcached]
172.16.1.3
172.16.1.6

3.建立免秘钥登陆,发给所以主机

ssh-keygen -t rsa -f .ssh/id_rsa -P ''

ssh-copy-id -i .ssh/id_rsa.pub [email protected]

ssh-copy-id -i .ssh/id_rsa.pub [email protected]

ssh-copy-id -i .ssh/id_rsa.pub [email protected]

ssh-copy-id -i .ssh/id_rsa.pub [email protected]

ansible all -m ping测试连通性

6bb4ac4811ae5fe63ca0bd7492c87970.png

4.在ansible主机上安装nginx和keepalived和php-fpm,以便ansible过程中需要使用其配置文件


keepalived配置

1.mkdir /etc/ansible/roles/keepalived/{files,tasks,templates,handlers,vars,default} -pv

2.vim /etc/ansible/roles/keepalived/tasks/main.yml

0fa610dbe484dbe2dc0a40427869ac05.png

3.vim /etc/ansible/roles/keepalived/handlers/main.yml
1
2

  • name: restart keepalived server
    service: name=keepalived state=restarted

4.复制刚才安装的keepalived主配置文件到指定目录,并修改如下

vim /etc/ansible/roles/keepalived/template/keepalived.conf.j2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34

! Configuration File for keepalived

global_defs {
notification_email {br/>root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id node1
vrrp_mcast_group4 224.0.43.100
}

vrrp_script ngx_server {
script "killal -0 nginx"
interval 1
weight -5
}

vrrp_instance VI_1 {
state {{ STATE }}
interface eno16777736
virtual_router_id 43
priority {{ PRI }}
advert_int 1
track_script ngx_server
authentication {
auth_type PASS
auth_pass zrs66zrs
}
virtual_ipaddress {
172.16.1.100/32 brd 172.16.1.100 dev eno16777736 label eno16777736:0
}
}


nginx的配置:

1.mkdir /etc/ansible/roles/nginx/{files,tasks,templates,handlers,vars,default} -pv

2.vim /etc/ansible/roles/nginx/tasks/main.yml

4eec1a9be1a65933ee63635d2a45e53b.png

3.vim /etc/ansible/roles/nginx/templates/nginx.repo.j2
1
2
3
4
5

[nginx]
name=nginx repo
baseurl=http://nginx.org/packages/centos/7/$basearch/
gpgcheck=0
enabled=1

复制刚才安装的nginx主配置文件到指定目录,并修改如下

vim /etc/ansible/roles/nginx/templates/nginx.conf.j2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

user nginx;
worker_processes 1;

error_log /var/log/nginx/error.log warn;
pid /var/run/nginx.pid;

events {
worker_connections 1024;
}

http {
include /etc/nginx/mime.types;
default_type application/octet-stream;

log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                  '$status $body_bytes_sent "$http_referer" '
                  '"$http_user_agent" "$http_x_forwarded_for"';

access_log  /var/log/nginx/access.log  main;

upstream amp {
              server 172.16.1.3;
        server 172.16.1.6;
}  

server {
listen 80;
location / {
proxy_pass http://amp;
proxy_set_header X-Real-IP $remote_addr;
}
}

sendfile        on;
#tcp_nopush     on;

keepalive_timeout  65;

#gzip  on;

include /etc/nginx/conf.d/*.conf;

}

4.复制刚才安装的nginx主配置文件到指定目录,并修改如下

vim /etc/ansible/roles/nginx/files/default.conf.j2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

server {
listen 80 default_server;
server_name localhost;

include /etc/nginx/default.d/*.conf;

location / {
    root   /usr/share/nginx/html;
    proxy_pass http://amp;
    index  index.html index.htm;
}

error_page  404              /404.html;
location = /404.html {
    root   /usr/share/nginx/html;
}

error_page   500 502 503 504  /50x.html;
location = /50x.html {
    root   /usr/share/nginx/html;
}

}

5.创建ip_forward脚本,开启前端代理服务器的核心转发功能

vim /etc/ansible/roles/nginx/files/ip_forward.sh
1
2
3

#!/bin/bash
#
echo > 1 /proc/sys/net/ipv4/ip_forward


amp的配置:

1.mkdir /etc/ansible/roles/amp/{files,tasks,templates,handlers,vars,default} -pv

2.vim /etc/ansible/roles/amp/tasks/main.yml

884f0059f4a33875850140a91ce21ae0.png

3.创建testdb数据库,和授权用户访问

vim /etc/ansible/roles/amp/files/db.sh
1
2
3
4
5
6

#!/bin/bash
#
mysql -u root -e "
create database testdb;
grant all on testdb.* TO 'testuser'@'localhost' IDENTIFIED BY '123456';
FLUSH PRIVILEGES;"


memcached配置

memcached缓存服务器为第一台调度器即172.16.1.10服务器,所以单独配置为memcached1

1.mkdir /etc/ansible/roles/memcached1/{files,tasks,templates,handlers,vars,default} -pv

2.vim /etc/ansible/roles/memcached1/tasks/main.yml

e529bc1acbdb06003731bdf352777a55.png

后端服务器上的配置

3.mkdir /etc/ansible/roles/memcached/{files,tasks,templates,handlers,vars,default} -pv

4.vim /etc/ansible/roles/memcached/tasks/main.yml

8f49696cd9782bab1a422bdf5e5648ad.png

说明:

第二个任务:在本机安装php-fpm即可出现并修改/etc/php.ini该配置文件中的[Session]段中的缓存路径为如下,

session.save_handler = memcache

session.save_handler = "tcp://172.16.1.10:11211"

第四个任务:是建立一个缓存测试页面

vim /etc/ansible/roles/memcached/templates/sessstore.php
1
2
3
4
5
6
7
8
9
10

$mem = new Memcache;
$mem->connect("172.16.1.10", 11211) or die("Could not connect");
$version = $mem->getVersion();
echo "Server's version: ".$version."
\n";
$mem->set('hellokey', 'Hello World', 0, 600) or die("Failed to save data at the memcached server");
echo "Store data in the cache (data will expire in 600 seconds)
\n";
$get_result = $mem->get('hellokey');
echo "$get_result is from memcached server.";
?>

第五个任务:将Discuz安装包放置在该目录下,传送到后端主机的指定目录。

第六个任务:解压该压缩包并赋予制定用户的权限


创建主配置文件,并且调用roles:

vim /etc/ansible/zrs.yml

9444d57861d8c98730c8a3961f39bd62.png

配置完成

先测试运行一下ansible-playbook --check zrs.yml,因为有的主机已经安装了某些软件,所以测试显示的是changed或者ok或者skipping
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120

[root@zj07 ansible]# ansible-playbook --check zrs.yml

PLAY [knsrvs] **

TASK [Gathering Facts] *****
ok: [172.16.1.10]
ok: [172.16.1.5]

TASK [keepalived : install keepalived] *****
changed: [172.16.1.5]
changed: [172.16.1.10]

TASK [keepalived : install conf file] **
changed: [172.16.1.10]
changed: [172.16.1.5]

TASK [keepalived : start keepalived] ***
changed: [172.16.1.10]
changed: [172.16.1.5]

TASK [nginx : copy nginx repo] *****
changed: [172.16.1.5]
ok: [172.16.1.10]

TASK [nginx : install nginx] ***
ok: [172.16.1.10]
changed: [172.16.1.5]

TASK [nginx : copy conf file] **
changed: [172.16.1.10]
changed: [172.16.1.5]

TASK [nginx : reload nginx] ****
changed: [172.16.1.10]
changed: [172.16.1.5]

TASK [nginx : start nginx] *****
changed: [172.16.1.5]
ok: [172.16.1.10]

TASK [nginx : ip_forward] **
changed: [172.16.1.5]
changed: [172.16.1.10]

RUNNING HANDLER [keepalived : restart keepalived server] ***
changed: [172.16.1.5]
changed: [172.16.1.10]

PLAY [websrvs] *****

TASK [Gathering Facts] *****
ok: [172.16.1.6]
ok: [172.16.1.3]

TASK [amp : install apache-php-mysql some package on CentOS 6] *****
skipping: [172.16.1.3] => (item=[])
skipping: [172.16.1.6] => (item=[])

TASK [amp : install apache-php-mysql some package on CentOS 7] *****
ok: [172.16.1.6] => (item=[u'httpd', u'mariadb-server', u'php-fpm', u'php-mysql'])
changed: [172.16.1.3] => (item=[u'httpd', u'mariadb-server', u'php-fpm', u'php-mysql'])

TASK [amp : start apm server] **
skipping: [172.16.1.3] => (item=httpd)
skipping: [172.16.1.3] => (item=mysqld)
skipping: [172.16.1.6] => (item=httpd)
skipping: [172.16.1.6] => (item=mysqld)

TASK [amp : start apm server] **
changed: [172.16.1.6] => (item=httpd)
changed: [172.16.1.3] => (item=httpd)
changed: [172.16.1.6] => (item=mariadb)
changed: [172.16.1.3] => (item=mariadb)

PLAY [memcached1] **

TASK [Gathering Facts] *****
ok: [172.16.1.10]

TASK [memcached1 : install memcached] **
ok: [172.16.1.10]

TASK [memcached1 : start memcached] ****
changed: [172.16.1.10]

PLAY [memcached] ***

TASK [Gathering Facts] *****
ok: [172.16.1.6]
ok: [172.16.1.3]

TASK [memcached : install memcached php session] ***
ok: [172.16.1.3]
ok: [172.16.1.6]

TASK [memcached : transfer php session conf] ***
changed: [172.16.1.3]
changed: [172.16.1.6]

TASK [memcached : reload httpd] ****
changed: [172.16.1.6]
changed: [172.16.1.3]

TASK [memcached : copy sessstore file] *****
changed: [172.16.1.6]
changed: [172.16.1.3]

TASK [memcached : copy discuz file] ****
changed: [172.16.1.6]
changed: [172.16.1.3]

TASK [memcached : tar discuz] **
changed: [172.16.1.6]
changed: [172.16.1.3]

PLAY RECAP *****
172.16.1.10 : ok=14 changed=8 unreachable=0 failed=0
172.16.1.3 : ok=10 changed=7 unreachable=0 failed=0
172.16.1.5 : ok=11 changed=10 unreachable=0 failed=0
172.16.1.6 : ok=10 changed=6 unreachable=0 failed=0

测试没问题,查看缓存页面是否成功,显示没问题。

0332779093768825b0180fc91000b779.png

开始运行

ansible-playbook zrs.yml

客户端查看,成功。

eb6a49fe3c0a4967f945773e28aaa494.png679116343fb5e1f8246423294d7d714c.png