问题解决：pvcreate过程中错误Device /dev/sdb not found (or ignored by filtering)
在pvcreate创建物理卷时出错：Device /dev/sdb not found.我的报错情况没有(or ignored by filtering)，
原因说明：显然，在/dev/目录下应该是要存在一个硬盘分区的，即/dev/sdb。接下来我分两种情况来说明这个问题。
解决：
第一种情况：
①先列出硬盘分区：
[root@centos7 ~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0008e2e1
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 50.5 GB, 50465865728 bytes, 98566144 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes从列出的信息可以看到，我事先分配的硬盘分区为：/dev/vdb.但是没有sdb,那么我就改用vdb了。虽然有分区了，但是需要经过一系列操作才能生效。
②如下：
[root@centos7 ~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xec0e9e9e.
Command (m for help): p
Disk /dev/vdb: 50.5 GB, 50465865728 bytes, 98566144 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xec0e9e9e
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p):
Using default response p
Partition number (1-4, default 1): 1
First sector (2048-98566143, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-98566143, default 98566143):
Using default value 98566143
Partition 1 of type Linux and of size 47 GiB is set
Command (m for help): p
Disk /dev/vdb: 50.5 GB, 50465865728 bytes, 98566144 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xec0e9e9e
Device Boot Start End Blocks Id System
/dev/vdb1 2048 98566143 49282048 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.其中按提示操作 p打印 n新增 d 删除 w操作生效 q退出。
③查看分区是否完成分配。
[root@centos7 ~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0008e2e1
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 83886046 41941999+ 83 Linux
Disk /dev/vdb: 50.5 GB, 50465865728 bytes, 98566144 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xec0e9e9e
Device Boot Start End Blocks Id System
/dev/vdb1 2048 98566143 49282048 83 Linux可以看到，出现了/dev/vdb1分区表已成功分配。
④更新分区表，并查看系统是否接收新的分区表。
[root@centos7 ~]# partprobe
[root@centos7 ~]# cat /proc/partitions
major minor #blocks name
253 0 41943040 vda
253 1 41941999 vda1
253 16 49283072 vdb
253 17 49282048 vdb1上述信息出现vdb的两条信息说明已成功更新分区表。
⑤格式化新加的分区表
[root@centos7 ~]# mkfs.ext3 /dev/vdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
3080192 inodes, 12320512 blocks
616025 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
376 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done那么到此就完成了，我的目标是完成硬盘分区来创建物理卷。
⑥查看系统有无PV
[root@centos7 ~]# pvscan
No matching physical volumes found没有。
⑦这里我将刚才创建的分区 /dev/vdb1作为物理卷。
[root@centos7 ~]# pvcreate /dev/vdb1
WARNING: ext3 signature detected on /dev/vdb1 at offset 1080. Wipe it? [y/n]: y
Wiping ext3 signature on /dev/vdb1.
Physical volume "/dev/vdb1" successfully created.⑧再次查看
[root@centos7 ~]# pvscan
PV /dev/vdb1 lvm2 [<47.00 GiB]
Total: 1 [<47.00 GiB] / in use: 0 [0 ] / in no VG: 1 [<47.00 GiB]
[root@centos7 ~]# pvdisplay
"/dev/vdb1" is a new physical volume of "<47.00 GiB"
--- NEW Physical volume ---
PV Name /dev/vdb1
VG Name
PV Size <47.00 GiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID p9pkiw-Pd5G-mKFY-eTqw-xYEv-56tJ-SLa4te成功。
⑨查看物理卷组，发现没有，并创建volume group 为stack-volumes-lvmdriver-1
[root@centos7 ~]# vgs
[root@centos7 ~]# vgcreate stack-volumes-lvmdriver-1 /dev/vdb1
Volume group "stack-volumes-lvmdriver-1" successfully created
[root@centos7 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
stack-volumes-lvmdriver-1 1 0 0 wz--n- <47.00g <47.00g完成。。。
如果想挂载硬盘到某个目录下，请继续。。。
⑩挂载硬盘到某一目录下，比如是/mnt.
# cd /mnt/
# mkdir home
挂载到/mnt/home
# mount /dev/vdb1 /mnt/home
查看
# df -h
把home下的东西拷到挂载的目录下，备份
# cp -a /home/* /mnt/home/
把home下的东西删干净
# rm -rf /home/*
卸载硬盘
# umount /dev/vdb1
查看
# df -h⑪设置开机挂载
# vi /etc/fstab
末尾增加一行
/dev/vdb1 /mnt/home ext3 defaults 1 2
保存退出
查看 /home是否被挂载
# df -h
挂载/etc/fstab 中未挂载的分区
# mount -a
查看
# df -h第二种情况：这也是网上的很多方式，这里推荐https://blog.csdn.net/sdu_king/article/details/74933121。
最后推荐几篇博文：
LINUX磁盘分区、格式化、挂载、卸载全程详解
Linux 如何将一块硬盘进行挂载到任意目录下
增加一块新硬盘，如何把它挂载到/home目录 从而扩大home空间
总有一款适合你：）