refind 0.10.3 配置文件refind.conf简单分析

• • 本文为转载：点击打开链接
  • 以下为个人理解
  • 常用的可以修改的配置： 
    
    1. timeout，等待时间
    2. resolution，屏幕分辨率
    3. default_selection，默认进入的系统选项
    4. include，引导界面美化常用
    5. max_tag，最多可显示几个启动项
    6. dont_scan_dirs, dont_scan_files, dont_scan_volumes，设置引导器过滤那些目录、文件、卷类型（分区）
  • 默认的配置已经可以满足引导功能的实现，但个人感觉，至少 resolution这一项需要自己配置一下
  • 想了解详细的配置项的含义，去官网的说明页面，用“Google翻译”翻译一下，大体的意思就明白了

  ---

  配置文件的注释为“#”,我使用“//”是为了让字体显示为红色，请勿直接拷贝使用，稍稍理解一下，自己修改最佳。

  #
  # refind.conf
  # Configuration file for the rEFInd boot menu
  #
  
  # Timeout in seconds for the main menu screen. Setting the timeout to 0
  # disables automatic booting (i.e., no timeout). Setting it to -1 causes
  # an immediate boot to the default OS *UNLESS* a keypress is in the buffer
  # when rEFInd launches, in which case that keypress is interpreted as a
  # shortcut key. If no matching shortcut is found, rEFInd displays its
  # menu with no timeout.
  # 
  // 设置默认等待时间为20
  // 0 : 无限期等待
  // -1: 立即进入默认的系统    
  timeout 20  
  
  # Screen saver timeout; the screen blanks after the specified number of
  # seconds with no keyboard input. The screen returns after most keypresses
  # (unfortunately, not including modifier keys such as Shift, Control, Alt,
  # or Option). Setting a value of "-1" causes rEFInd to start up with its
  # screen saver active. The default is 0, which disables the screen saver.
  // 设置引导前屏保时间
  #screensaver 300
  
  # Hide user interface elements for personal preference or to increase
  # security:
  // eEFInd标识图
  #  banner      - the rEFInd title banner (built-in or loaded via "banner")
  // 每个标签的文字描述以及timeout设置的倒数计时器
  #  label       - boot option text label in the menu
  // 苹果系统子菜单中单用户选项
  #  singleuser  - remove the submenu options to boot Mac OS X in single-user
  #                or verbose modes; affects ONLY MacOS X
  // 苹果系统子菜单中安全模式选项
  #  safemode    - remove the submenu option to boot Mac OS X in "safe mode"
  // Mac硬件测试选项
  #  hwtest      - the submenu option to run Apple's hardware test
  // 无法显示所有的引导菜单时的左右指示箭头
  #  arrows      - scroll arrows on the OS selection tag line
  // 基本按键的简要说明
  #  hints       - brief command summary in the menu
  // 选项编辑器
  #  editor      - the options editor (+, F2, or Insert on boot options menu)
  // ??
  #  badges      - device-type badges for boot options
  // 所有选项
  #  all         - all of the above
  // 默认都激活
  # Default is none of these (all elements active)
  #
  // hideui 隐藏界面功能命令
  #hideui singleuser
  #hideui all
  
  # Set the name of a subdirectory in which icons are stored. Icons must
  # have the same names they have in the standard directory. The directory
  # name is specified relative to the main rEFInd binary's directory. If
  # an icon can't be found in the specified directory, an attempt is made
  # to load it from the default directory; thus, you can replace just some
  # icons in your own directory and rely on the default for others.
  # Default is "icons".
  #
  // 图标目录，默认 "icons"
  #icons_dir myicons
  #icons_dir icons/snowy
  
  # Use a custom title banner instead of the rEFInd icon and name. The file
  # path is relative to the directory where refind.efi is located. The color
  # in the top left corner of the image is used as the background color
  # for the menu screens. Currently uncompressed BMP images with color
  # depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
  #
  // 背景图
  #banner hostname.bmp
  #banner mybanner.png
  #banner icons/snowy/banner-snowy.png
  
  # Specify how to handle banners that aren't exactly the same as the screen
  # size:
  // 自动缩放
  #  noscale     - Crop if too big, show with border if too small
  // 全屏
  #  fillscreen  - Fill the screen
  # Default is noscale
  #
  // 背景图大小,默认自动缩放
  #banner_scale fillscreen
  
  # Icon sizes. All icons are square, so just one value is specified. The
  # big icons are used for OS selectors in the first row and the small
  # icons are used for tools on the second row. Drive-type badges are 1/4
  # the size of the big icons. Legal values are 32 and above. If the icon
  # files do not hold icons of the proper size, the icons are scaled to
  # the specified size. The default values are 48 and 128 for small and
  # big icons, respectively.
  #
  // 小图标大小
  #small_icon_size 96
  // 大图标大小
  #big_icon_size 256
  
  # Custom images for the selection background. There is a big one (144 x 144)
  # for the OS icons, and a small one (64 x 64) for the function icons in the
  # second row. If only a small image is given, that one is also used for
  # the big icons by stretching it in the middle. If only a big one is given,
  # the built-in default will be used for the small icons.
  #
  # Like the banner option above, these options take a filename of an
  # uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
  # or a PNG image. The PNG format is required if you need transparency
  # support (to let you "see through" to a full-screen banner).
  #
  // 选中时的图标
  #selection_big   selection-big.bmp
  #selection_small selection-small.bmp
  
  # Set the font to be used for all textual displays in graphics mode.
  # The font must be a PNG file with alpha channel transparency. It must
  # contain ASCII characters 32-126 (space through tilde), inclusive, plus
  # a glyph to be displayed in place of characters outside of this range,
  # for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
  # may be of any size, although large fonts can produce display
  # irregularities.
  # The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
  #
  // 字体
  #font myfont.png
  
  # Use text mode only. When enabled, this option forces rEFInd into text mode.
  # Passing this option a "0" value causes graphics mode to be used. Pasing
  # it no value or any non-0 value causes text mode to be used.
  # Default is to use graphics mode.
  #
  // 仅文本模式，默认不开启
  #textonly
  
  # Set the EFI text mode to be used for textual displays. This option
  # takes a single digit that refers to a mode number. Mode 0 is normally
  # 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
  # modes. Mode 1024 is a special code that tells rEFInd to not set the
  # text mode; it uses whatever was in use when the program was launched.
  # If you specify an invalid mode, rEFInd pauses during boot to inform
  # you of valid modes.
  # CAUTION: On VirtualBox, and perhaps on some real computers, specifying
  # a text mode and uncommenting the "textonly" option while NOT specifying
  # a resolution can result in an unusable display in the booted OS.
  # Default is 1024 (no change)
  #
  // 文本模式 2 ??
  #textmode 2
  
  # Set the screen's video resolution. Pass this option either:
  #  * two values, corresponding to the X and Y resolutions
  #  * one value, corresponding to a GOP (UEFI) video mode
  # Note that not all resolutions are supported. On UEFI systems, passing
  # an incorrect value results in a message being shown on the screen to
  # that effect, along with a list of supported modes. On EFI 1.x systems
  # (e.g., Macintoshes), setting an incorrect mode silently fails. On both
  # types of systems, setting an incorrect resolution results in the default
  # resolution being used. A resolution of 1024x768 usually works, but higher
  # values often don't.
  # Default is "0 0" (use the system default resolution, usually 800x600).
  #
  #resolution 1024 768
  #resolution 1440 900
  // 屏幕分辨率->务必设置为自己电脑的分辨率
  resolution 1366 768
  #resolution 3
  
  # Launch specified OSes in graphics mode. By default, rEFInd switches
  # to text mode and displays basic pre-launch information when launching
  # all OSes except OS X. Using graphics mode can produce a more seamless
  # transition, but displays no information, which can make matters
  # difficult if you must debug a problem. Also, on at least one known
  # computer, using graphics mode prevents a crash when using the Linux
  # kernel's EFI stub loader. You can specify an empty list to boot all
  # OSes in text mode.
  # Valid options:
  #   osx     - Mac OS X
  #   linux   - A Linux kernel with EFI stub loader
  #   elilo   - The ELILO boot loader
  #   grub    - The GRUB (Legacy or 2) boot loader
  #   windows - Microsoft Windows
  # Default value: osx
  #
  // ??
  #use_graphics_for osx,linux
  
  # Which non-bootloader tools to show on the tools line, and in what
  # order to display them:
  // 命令行
  #  shell            - the EFI shell (requires external program; see rEFInd
  #                     documentation for details)
  // 内存测试
  #  memtest          - the memtest86 program, in EFI/tools, EFI/memtest86,
  #                     EFI/memtest, EFI/tools/memtest86, or EFI/tools/memtest
  // ??
  #  gptsync          - the (dangerous) gptsync.efi utility (requires external
  #                     program; see rEFInd documentation for details)
  // 分区
  #  gdisk            - the gdisk partitioning program
  // 苹果恢复模式
  #  apple_recovery   - boots the Apple Recovery HD partition, if present
  // windows恢复模式
  #  windows_recovery - boots an OEM Windows recovery tool, if present
  #                     (see also the windows_recovery_files option)
  // ??
  #  mok_tool         - makes available the Machine Owner Key (MOK) maintenance
  #                     tool, MokManager.efi, used on Secure Boot systems
  // ??
  #  csr_rotate       - adjusts Apple System Integrity Protection (SIP)
  #                     policy. Requires "csr_values" to be set.
  // 关于
  #  about            - an "about this program" option
  // 退出
  #  exit             - a tag to exit from rEFInd
  // 关机
  #  shutdown         - shuts down the computer (a bug causes this to reboot
  #                     many UEFI systems)
  // 重启
  #  reboot           - a tag to reboot the computer
  // 重启到固件
  #  firmware         - a tag to reboot the computer into the firmware's
  #                     user interface (ignored on older computers)
  #  fwupdate         - a tag to update the firmware; launches the fwupx64.efi
  #                     (or similar) program
  #  netboot          - launch the ipxe.efi tool for network (PXE) booting
  # Default is shell,memtest,gdisk,apple_recovery,windows_recovery,mok_tool,about,shutdown,reboot,firmware,fwupdate
  #
  #showtools shell, gdisk, memtest, mok_tool, apple_recovery, windows_recovery, about, reboot, exit, firmware, fwupdate
  
  # Boot loaders that can launch a Windows restore or emergency system.
  # These tend to be OEM-specific.
  # Default is LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
  #
  // windows恢复文件
  #windows_recovery_files LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
  
  # Directories in which to search for EFI drivers. These drivers can
  # provide filesystem support, give access to hard disks on plug-in
  # controllers, etc. In most cases none are needed, but if you add
  # EFI drivers and you want rEFInd to automatically load them, you
  # should specify one or more paths here. rEFInd always scans the
  # "drivers" and "drivers_{arch}" subdirectories of its own installation
  # directory (where "{arch}" is your architecture code); this option
  # specifies ADDITIONAL directories to scan.
  # Default is to scan no additional directories for EFI drivers
  #
  // 扫描驱动目录
  #scan_driver_dirs EFI/tools/drivers,drivers
  
  # Which types of boot loaders to search, and in what order to display them:
  #  internal      - internal EFI disk-based boot loaders
  #  external      - external EFI disk-based boot loaders
  #  optical       - EFI optical discs (CD, DVD, etc.)
  #  netboot       - EFI network (PXE) boot options
  #  hdbios        - BIOS disk-based boot loaders
  #  biosexternal  - BIOS external boot loaders (USB, eSATA, etc.)
  #  cd            - BIOS optical-disc boot loaders
  #  manual        - use stanzas later in this configuration file
  # Note that the legacy BIOS options require firmware support, which is
  # not present on all computers.
  # The netboot option is experimental and relies on the ipxe.efi and
  # ipxe_discover.efi program files.
  # On UEFI PCs, default is internal,external,optical,manual
  # On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
  #
  #scanfor internal,external,optical,manual
  
  # By default, rEFInd relies on the UEFI firmware to detect BIOS-mode boot
  # devices. This sometimes doesn't detect all the available devices, though.
  # For these cases, uefi_deep_legacy_scan results in a forced scan and
  # modification of NVRAM variables on each boot. Adding "0", "off", or
  # "false" resets to the default value. This token has no effect on Macs or
  # when no BIOS-mode options are set via scanfor.
  # Default is unset (or "uefi_deep_legacy_scan false")
  #
  // bios兼容模式
  #uefi_deep_legacy_scan
  
  # Delay for the specified number of seconds before scanning disks.
  # This can help some users who find that some of their disks
  # (usually external or optical discs) aren't detected initially,
  # but are detected after pressing Esc.
  # The default is 0.
  #
  #scan_delay 5
  
  # When scanning volumes for EFI boot loaders, rEFInd always looks for
  # Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
  # and scans the root directory and every subdirectory of the /EFI directory
  # for additional boot loaders, but it doesn't recurse into these directories.
  # The also_scan_dirs token adds more directories to the scan list.
  # Directories are specified relative to the volume's root directory. This
  # option applies to ALL the volumes that rEFInd scans UNLESS you include
  # a volume name and colon before the directory name, as in "myvol:/somedir"
  # to scan the somedir directory only on the filesystem named myvol. If a
  # specified directory doesn't exist, it's ignored (no error condition
  # results). The default is to scan the "boot" directory in addition to
  # various hard-coded directories.
  #
  // 总是扫描那些目录
  #also_scan_dirs boot,ESP2:EFI/linux/kernels
  
  # Partitions (or whole disks, for legacy-mode boots) to omit from scans.
  # For EFI-mode scans, you must specify a volume by its label, which you
  # can obtain in an EFI shell by typing "vol", from Linux by typing
  # "blkid /dev/{devicename}", or by examining the disk's label in various
  # OSes' file browsers.
  # For legacy-mode scans, you can specify any subset of the boot loader
  # description shown when you highlight the option in rEFInd.
  # The default is "LRS_ESP".
  #
  // 不扫描那些驱动器
  #dont_scan_volumes "Recovery HD"
  
  # Directories that should NOT be scanned for boot loaders. By default,
  # rEFInd doesn't scan its own directory, the EFI/tools directory, the
  # EFI/memtest directory, the EFI/memtest86 directory, or the
  # com.apple.recovery.boot directory. Using the dont_scan_dirs option
  # enables you to "blacklist" other directories; but be sure to use "+"
  # as the first element if you want to continue blacklisting existing
  # directories. You might use this token to keep EFI/boot/bootx64.efi out
  # of the menu if that's a duplicate of another boot loader or to exclude
  # a directory that holds drivers or non-bootloader utilities provided by
  # a hardware manufacturer. If a directory is listed both here and in
  # also_scan_dirs, dont_scan_dirs takes precedence. Note that this
  # blacklist applies to ALL the filesystems that rEFInd scans, not just
  # the ESP, unless you precede the directory name by a filesystem name,
  # as in "myvol:EFI/somedir" to exclude EFI/somedir from the scan on the
  # myvol volume but not on other volumes.
  #
  // 不要扫描那些目录
  #dont_scan_dirs ESP:/EFI/boot,EFI/Dell,EFI/memtest86
  
  # Files that should NOT be included as EFI boot loaders (on the
  # first line of the display). If you're using a boot loader that
  # relies on support programs or drivers that are installed alongside
  # the main binary or if you want to "blacklist" certain loaders by
  # name rather than location, use this option. Note that this will
  # NOT prevent certain binaries from showing up in the second-row
  # set of tools. Most notably, various Secure Boot and recovery
  # tools are present in this list, but may appear as second-row
  # items.
  # The file may be specified as a bare name (e.g., "notme.efi"), as
  # a complete filename (e.g., "/EFI/somedir/notme.efi"), or as a
  # complete filename with volume (e.g., "SOMEDISK:/EFI/somedir/notme.efi").
  # The default is shim.efi,shim-fedora.efi,shimx64.efi,PreLoader.efi,
  # TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,
  # HashTool-signed.efi,bootmgr.efi
  #
  // 不要扫描那些文件
  #dont_scan_files shim.efi,MokManager.efi
  
  # Scan for Linux kernels that lack a ".efi" filename extension. This is
  # useful for better integration with Linux distributions that provide
  # kernels with EFI stub loaders but that don't give those kernels filenames
  # that end in ".efi", particularly if the kernels are stored on a
  # filesystem that the EFI can read. When set to "1", "true", or "on", this
  # option causes all files in scanned directories with names that begin with
  # "vmlinuz" or "bzImage" to be included as loaders, even if they lack ".efi"
  # extensions. Passing this option a "0", "false", or "off" value causes
  # kernels without ".efi" extensions to NOT be scanned.
  # Default is "true" -- to scan for kernels without ".efi" extensions.
  #
  // 和linux相关的
  #scan_all_linux_kernels false
  
  # Combine all Linux kernels in a given directory into a single entry.
  # When so set, the kernel with the most recent time stamp will be launched
  # by default, and its filename will appear in the entry's description.
  # To launch other kernels, the user must press F2 or Insert; alternate
  # kernels then appear as options on the sub-menu.
  # Default is "true" -- kernels are "folded" into a single menu entry.
  #
  #fold_linux_kernels false
  
  # Set the maximum number of tags that can be displayed on the screen at
  # any time. If more loaders are discovered than this value, rEFInd shows
  # a subset in a scrolling list. If this value is set too high for the
  # screen to handle, it's reduced to the value that the screen can manage.
  # If this value is set to 0 (the default), it's adjusted to the number
  # that the screen can handle.
  #
  // 引导项太多，默认将不能处理的去掉
  #max_tags 0
  
  # Set the default menu selection.  The available arguments match the
  # keyboard accelerators available within rEFInd.  You may select the
  # default loader using:
  #  - A digit between 1 and 9, in which case the Nth loader in the menu
  #    will be the default.
  #  - A "+" symbol at the start of the string, which refers to the most
  #    recently booted loader.
  #  - Any substring that corresponds to a portion of the loader's title
  #    (usually the OS's name, boot loader's path, or a volume or
  #    filesystem title).
  # You may also specify multiple selectors by separating them with commas
  # and enclosing the list in quotes. (The "+" option is only meaningful in
  # this context.)
  # If you follow the selector(s) with two times, in 24-hour format, the
  # default will apply only between those times. The times are in the
  # motherboard's time standard, whether that's UTC or local time, so if
  # you use UTC, you'll need to adjust this from local time manually.
  # Times may span midnight as in "23:30 00:30", which applies to 11:30 PM
  # to 12:30 AM. You may specify multiple default_selection lines, in which
  # case the last one to match takes precedence. Thus, you can set a main
  # option without a time followed by one or more that include times to
  # set different defaults for different times of day.
  # The default behavior is to boot the previously-booted OS.
  #
  // 默认进入第一个引导项
  #default_selection 1
  // 默认进入微软系统
  #default_selection Microsoft
  #default_selection "+,bzImage,vmlinuz"
  #default_selection Maintenance 23:30 2:00
  #default_selection "Maintenance,OS X" 1:00 2:30
  
  # Enable VMX bit and lock the CPU MSR if unlocked.
  # On some Intel Apple computers, the firmware does not lock the MSR 0x3A.
  # The symptom on Windows is Hyper-V not working even if the CPU
  # meets the minimum requirements (HW assisted virtualization and SLAT)
  # DO NOT SET THIS EXCEPT ON INTEL CPUs THAT SUPPORT VMX! See
  # http://www.thomas-krenn.com/en/wiki/Activating_the_Intel_VT_Virtualization_Feature!
  # for more on this subject.
  # The default is false: Don't try to enable and lock the MSR.
  #
  #enable_and_lock_vmx false
  
  # Tell a Mac's EFI that OS X is about to be launched, even when it's not.
  # This option causes some Macs to initialize their hardware differently than
  # when a third-party OS is launched normally. In some cases (particularly on
  # Macs with multiple video cards), using this option can cause hardware to
  # work that would not otherwise work. On the other hand, using this option
  # when it is not necessary can cause hardware (such as keyboards and mice) to
  # become inaccessible. Therefore, you should not enable this option if your
  # non-Apple OSes work correctly; enable it only if you have problems with
  # some hardware devices. When needed, a value of "10.9" usually works, but
  # you can experiment with other values. This feature has no effect on
  # non-Apple computers.
  # The default is inactive (no OS X spoofing is done).
  #
  #spoof_osx_version 10.9
  
  # Set the CSR values for Apple's System Integrity Protection (SIP) feature.
  # Values are one-byte (two-character) hexadecimal numbers. These values
  # define which specific security features are enabled. Below are the codes
  # for what the values mean. Add them up (in hexadecimal!) to set new values.
  # Apple's "csrutil enable" and "csrutil disable" commands set values of 10
  # and 77, respectively.
  #   CSR_ALLOW_UNTRUSTED_KEXTS       0x01
  #   CSR_ALLOW_UNRESTRICTED_FS       0x02
  #   CSR_ALLOW_TASK_FOR_PID          0x04
  #   CSR_ALLOW_KERNEL_DEBUGGER       0x08
  #   CSR_ALLOW_APPLE_INTERNAL        0x10
  #   CSR_ALLOW_UNRESTRICTED_DTRACE   0x20
  #   CSR_ALLOW_UNRESTRICTED_NVRAM    0x40
  #
  #csr_values 10,77
  
  # Include a secondary configuration file within this one. This secondary
  # file is loaded as if its options appeared at the point of the "include"
  # token itself, so if you want to override a setting in the main file,
  # the secondary file must be referenced AFTER the setting you want to
  # override. Note that the secondary file may NOT load a tertiary file.
  #
  // 读取自己的配置，一般引导界面美化时用到
  #include manual.conf
  include refind-theme-regular/theme.conf
  
  # Sample manual configuration stanzas. Each begins with the "menuentry"
  # keyword followed by a name that's to appear in the menu (use quotes
  # if you want the name to contain a space) and an open curly brace
  # ("{"). Each entry ends with a close curly brace ("}"). Common
  # keywords within each stanza include:
  #
  // 名字
  #  volume    - identifies the filesystem from which subsequent files
  #              are loaded. You can specify the volume by filesystem
  #              label, by partition label, or by partition GUID number
  #              (but NOT yet by filesystem UUID number).
  // 引导文件
  #  loader    - identifies the boot loader file
  // 读到内存文件
  #  initrd    - Specifies an initial RAM disk file
  // 图标文件
  #  icon      - specifies a custom boot loader icon
  // 系统类型
  #  ostype    - OS type code to determine boot options available by
  #              pressing Insert. Valid values are "MacOS", "Linux",
  #              "Windows", and "XOM". Case-sensitive.
  // 显示模式
  #  graphics  - set to "on" to enable graphics-mode boot (useful
  #              mainly for MacOS) or "off" for text-mode boot.
  #              Default is auto-detected from loader filename.
  // 参数
  #  options   - sets options to be passed to the boot loader; use
  #              quotes if more than one option should be passed or
  #              if any options use characters that might be changed
  #              by rEFInd parsing procedures (=, /, #, or tab).
  // 打开还是关闭
  #  disabled  - use alone or set to "yes" to disable this entry.
  #
  # Note that you can use either DOS/Windows/EFI-style backslashes (\)
  # or Unix-style forward slashes (/) as directory separators. Either
  # way, all file references are on the ESP from which rEFInd was
  # launched.
  # Use of quotes around parameters causes them to be interpreted as
  # one keyword, and for parsing of special characters (spaces, =, /,
  # and #) to be disabled. This is useful mainly with the "options"
  # keyword. Use of quotes around parameters that specify filenames is
  # permissible, but you must then use backslashes instead of slashes,
  # except when you must pass a forward slash to the loader, as when
  # passing a root= option to a Linux kernel.
  
  # Below are several sample boot stanzas. All are disabled by default.
  # Find one similar to what you need, copy it, remove the "disabled" line,
  # and adjust the entries to suit your needs.
  
  # A sample entry for a Linux 3.13 kernel with EFI boot stub support
  # on a partition with a GUID of 904404F8-B481-440C-A1E3-11A5A954E601.
  # This entry includes Linux-specific boot options and specification
  # of an initial RAM disk. Note uses of Linux-style forward slashes.
  # Also note that a leading slash is optional in file specifications.
  // 菜单名字
  menuentry Linux {
      // 使用的图标
      icon EFI/refind/icons/os_linux.png
      volume 904404F8-B481-440C-A1E3-11A5A954E601
      loader bzImage-3.3.0-rc7
      initrd initrd-3.3.0.img
      options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
      // 启用或关闭
      disabled
  }
  
  # A sample entry for loading Ubuntu using its standard name for
  # its GRUB 2 boot loader. Note uses of Linux-style forward slashes
  menuentry Ubuntu {
      loader /EFI/ubuntu/grubx64.efi
      icon /EFI/refind/icons/os_linux.png
      disabled
  }
  
  # A minimal ELILO entry, which probably offers nothing that
  # auto-detection can't accomplish.
  menuentry "ELILO" {
      loader \EFI\elilo\elilo.efi
      disabled
  }
  
  # Like the ELILO entry, this one offers nothing that auto-detection
  # can't do; but you might use it if you want to disable auto-detection
  # but still boot Windows....
  menuentry "Windows 7" {
      loader \EFI\Microsoft\Boot\bootmgfw.efi
      disabled
  }
  
  # EFI shells are programs just like boot loaders, and can be
  # launched in the same way. You can pass a shell the name of a
  # script that it's to run on the "options" line. The script
  # could initialize hardware and then launch an OS, or it could
  # do something entirely different.
  menuentry "Windows via shell script" {
      icon \EFI\refind\icons\os_win.png
      loader \EFI\tools\shell.efi
      options "fs0:\EFI\tools\launch_windows.nsh"
      disabled
  }
  
  # Mac OS is normally detected and run automatically; however,
  # if you want to do something unusual, a manual boot stanza may
  # be the way to do it. This one does nothing very unusual, but
  # it may serve as a starting point. Note that you'll almost
  # certainly need to change the "volume" line for this example
  # to work.
  menuentry "My Mac OS X" {
      icon \EFI\refind\icons\os_mac.png
      volume "OS X boot"
      loader \System\Library\CoreServices\boot.efi
      disabled
  }