黄宝康

nmap命令的详解

使用-sP参数对对应主机段的主机发送ICMP报文，可以查询到哪些主机是存活的。

[root@localhost ~]# nmap -sP 192.168.8.0/24

Starting Nmap 6.40 ( http://nmap.org ) at 2018-07-10 14:32 CST
Nmap scan report for 192.168.8.0
Host is up (0.0044s latency).
Nmap scan report for 192.168.8.1
Host is up (0.0030s latency).
Nmap scan report for 192.168.8.2
Host is up (0.0022s latency).
Nmap scan report for 192.168.8.3
Host is up (0.0040s latency).
Nmap scan report for 192.168.8.4
Host is up (0.014s latency).
Nmap scan report for 192.168.8.5
Host is up (0.014s latency).
Nmap scan report for 192.168.8.6
Host is up (0.0045s latency).
Nmap scan report for 192.168.8.7
Host is up (0.015s latency).
Nmap scan report for 192.168.8.8
Host is up (0.014s latency).
Nmap scan report for 192.168.8.9
Host is up (0.014s latency).
Nmap scan report for 192.168.8.10
Host is up (0.014s latency).
Nmap scan report for 192.168.8.11
Host is up (0.064s latency).
Nmap scan report for 192.168.8.12
Host is up (0.0069s latency).
Nmap scan report for 192.168.8.13
Host is up (0.014s latency).
Nmap scan report for 192.168.8.14
Host is up (0.014s latency).
Nmap scan report for 192.168.8.15
Host is up (0.064s latency).
Nmap scan report for 192.168.8.16
Host is up (0.0042s latency).
Nmap scan report for 192.168.8.17
Host is up (0.017s latency).
Nmap scan report for 192.168.8.18
Host is up (0.017s latency).
Nmap scan report for 192.168.8.19
Host is up (0.0043s latency).
Nmap scan report for 192.168.8.20
Host is up (0.064s latency).
Nmap scan report for 192.168.8.21
Host is up (0.017s latency).
Nmap scan report for 192.168.8.22
Host is up (0.017s latency).
Nmap scan report for 192.168.8.23
Host is up (0.090s latency).
Nmap scan report for 192.168.8.24
Host is up (0.090s latency).
Nmap scan report for 192.168.8.25
Host is up (0.0021s latency).
Nmap scan report for 192.168.8.26
Host is up (0.063s latency).
Nmap scan report for 192.168.8.27
Host is up (0.063s latency).
Nmap scan report for 192.168.8.28
Host is up (0.015s latency).
Nmap scan report for 192.168.8.29
Host is up (0.015s latency).
Nmap scan report for 192.168.8.30
Host is up (0.015s latency).
Nmap scan report for 192.168.8.31
Host is up (0.015s latency).
Nmap scan report for 192.168.8.32
Host is up (0.015s latency).
Nmap scan report for 192.168.8.33
Host is up (0.015s latency).
Nmap scan report for 192.168.8.34
Host is up (0.015s latency).
Nmap scan report for 192.168.8.35
Host is up (0.015s latency).
Nmap scan report for 192.168.8.36
Host is up (0.063s latency).
Nmap scan report for 192.168.8.37
Host is up (0.089s latency).
Nmap scan report for 192.168.8.38
Host is up (0.019s latency).
Nmap scan report for 192.168.8.39
Host is up (0.019s latency).
Nmap scan report for 192.168.8.40
Host is up (0.019s latency).
Nmap scan report for 192.168.8.41
Host is up (0.019s latency).
Nmap scan report for 192.168.8.42
Host is up (0.086s latency).
Nmap scan report for 192.168.8.43
Host is up (0.0098s latency).
Nmap scan report for 192.168.8.44
Host is up (0.0022s latency).
Nmap scan report for 192.168.8.45
Host is up (0.0041s latency).
Nmap scan report for 192.168.8.46
Host is up (0.0096s latency).
Nmap scan report for 192.168.8.47
Host is up (0.013s latency).
Nmap scan report for 192.168.8.48
Host is up (0.013s latency).
Nmap scan report for 192.168.8.49
Host is up (0.013s latency).
Nmap scan report for 192.168.8.50
Host is up (0.013s latency).
Nmap scan report for 192.168.8.51
Host is up (0.013s latency).
Nmap scan report for 192.168.8.52
Host is up (0.0036s latency).
Nmap scan report for 192.168.8.53
Host is up (0.013s latency).
Nmap scan report for 192.168.8.54
Host is up (0.013s latency).
Nmap scan report for 192.168.8.55
Host is up (0.089s latency).
Nmap scan report for 192.168.8.56
Host is up (0.089s latency).
Nmap scan report for 192.168.8.57
Host is up (0.035s latency).
Nmap scan report for 192.168.8.58
Host is up (0.0027s latency).
Nmap scan report for 192.168.8.59
Host is up (0.0043s latency).
Nmap scan report for 192.168.8.60
Host is up (0.0024s latency).
Nmap scan report for 192.168.8.61
Host is up (0.0094s latency).
Nmap scan report for 192.168.8.62
Host is up (0.0094s latency).
Nmap scan report for 192.168.8.63
Host is up (0.74s latency).
Nmap scan report for 192.168.8.64
Host is up (0.035s latency).
Nmap scan report for 192.168.8.65
Host is up (0.035s latency).
Nmap scan report for 192.168.8.66
Host is up (0.035s latency).
Nmap scan report for 192.168.8.67
Host is up (0.035s latency).
Nmap scan report for 192.168.8.68
Host is up (0.035s latency).
Nmap scan report for 192.168.8.69
Host is up (0.035s latency).
Nmap scan report for 192.168.8.70
Host is up (0.035s latency).
Nmap scan report for 192.168.8.71
Host is up (0.035s latency).
Nmap scan report for 192.168.8.72
Host is up (0.0032s latency).
Nmap scan report for 192.168.8.73
Host is up (0.089s latency).
Nmap scan report for 192.168.8.74
Host is up (0.035s latency).
Nmap scan report for 192.168.8.75
Host is up (0.035s latency).
Nmap scan report for 192.168.8.76
Host is up (0.035s latency).
Nmap scan report for 192.168.8.77
Host is up (0.0041s latency).
Nmap scan report for 192.168.8.78
Host is up (0.0029s latency).
Nmap scan report for 192.168.8.79
Host is up (0.0039s latency).
Nmap scan report for 192.168.8.80
Host is up (0.0038s latency).
Nmap scan report for 192.168.8.81
Host is up (0.089s latency).
Nmap scan report for 192.168.8.82
Host is up (0.0040s latency).
Nmap scan report for 192.168.8.83
Host is up (0.034s latency).
Nmap scan report for 192.168.8.84
Host is up (0.034s latency).
Nmap scan report for 192.168.8.85
Host is up (0.0034s latency).
Nmap scan report for 192.168.8.86
Host is up (0.0042s latency).
Nmap scan report for 192.168.8.87
Host is up (0.0057s latency).
Nmap scan report for 192.168.8.88
Host is up (0.017s latency).
Nmap scan report for 192.168.8.89
Host is up (0.0092s latency).
Nmap scan report for 192.168.8.90
Host is up (0.0038s latency).
Nmap scan report for 192.168.8.91
Host is up (0.0035s latency).
Nmap scan report for 192.168.8.92
Host is up (0.017s latency).
Nmap scan report for 192.168.8.93
Host is up (0.0072s latency).
Nmap scan report for 192.168.8.94
Host is up (0.0071s latency).
Nmap scan report for 192.168.8.95
Host is up (0.017s latency).
Nmap scan report for 192.168.8.96
Host is up (0.016s latency).
Nmap scan report for 192.168.8.97
Host is up (0.0091s latency).
Nmap scan report for 192.168.8.98
Host is up (0.0037s latency).
Nmap scan report for 192.168.8.99
Host is up (0.14s latency).
Nmap scan report for 192.168.8.100
Host is up (0.016s latency).
Nmap scan report for 192.168.8.101
Host is up (0.0086s latency).
Nmap scan report for 192.168.8.102
Host is up (0.0085s latency).
Nmap scan report for 192.168.8.103
Host is up (0.0042s latency).
Nmap scan report for 192.168.8.104
Host is up (0.0023s latency).
Nmap scan report for 192.168.8.105
Host is up (0.0077s latency).
Nmap scan report for 192.168.8.106
Host is up (0.015s latency).
Nmap scan report for 192.168.8.107
Host is up (0.015s latency).
Nmap scan report for 192.168.8.108
Host is up (0.015s latency).
Nmap scan report for 192.168.8.109
Host is up (0.015s latency).
Nmap scan report for 192.168.8.110
Host is up (0.012s latency).
Nmap scan report for 192.168.8.111
Host is up (0.085s latency).
Nmap scan report for 192.168.8.112
Host is up (0.0036s latency).
Nmap scan report for 192.168.8.113
Host is up (0.015s latency).
Nmap scan report for 192.168.8.114
Host is up (0.012s latency).
Nmap scan report for 192.168.8.115
Host is up (0.012s latency).
Nmap scan report for 192.168.8.116
Host is up (0.014s latency).
Nmap scan report for 192.168.8.117
Host is up (0.10s latency).
Nmap scan report for 192.168.8.118
Host is up (0.0035s latency).
Nmap scan report for 192.168.8.119
Host is up (0.013s latency).
Nmap scan report for 192.168.8.120
Host is up (0.013s latency).
Nmap scan report for 192.168.8.121
Host is up (0.013s latency).
Nmap scan report for 192.168.8.122
Host is up (0.013s latency).
Nmap scan report for 192.168.8.123
Host is up (0.013s latency).
Nmap scan report for 192.168.8.124
Host is up (0.057s latency).
Nmap scan report for 192.168.8.125
Host is up (0.0035s latency).
Nmap scan report for 192.168.8.126
Host is up (0.016s latency).
Nmap scan report for 192.168.8.127
Host is up (0.013s latency).
Nmap scan report for 192.168.8.128
Host is up (0.15s latency).
Nmap scan report for 192.168.8.129
Host is up (0.0070s latency).
Nmap scan report for 192.168.8.130
Host is up (0.0033s latency).
Nmap scan report for 192.168.8.131
Host is up (0.0042s latency).
Nmap scan report for 192.168.8.132
Host is up (0.0065s latency).
Nmap scan report for 192.168.8.133
Host is up (0.0064s latency).
Nmap scan report for 192.168.8.134
Host is up (0.0066s latency).
Nmap scan report for 192.168.8.135
Host is up (0.011s latency).
Nmap scan report for 192.168.8.136
Host is up (0.057s latency).
Nmap scan report for 192.168.8.137
Host is up (0.11s latency).
Nmap scan report for 192.168.8.138
Host is up (0.011s latency).
Nmap scan report for 192.168.8.139
Host is up (0.011s latency).
Nmap scan report for 192.168.8.140
Host is up (0.014s latency).
Nmap scan report for 192.168.8.141
Host is up (0.0092s latency).
Nmap scan report for 192.168.8.142
Host is up (0.00023s latency).
Nmap scan report for 192.168.8.143
Host is up (0.00041s latency).
Nmap scan report for 192.168.8.144
Host is up (0.0083s latency).
Nmap scan report for 192.168.8.145
Host is up (0.0090s latency).
Nmap scan report for 192.168.8.146
Host is up (0.016s latency).
Nmap scan report for 192.168.8.147
Host is up (0.0077s latency).
Nmap scan report for 192.168.8.148
Host is up (0.00017s latency).
Nmap scan report for 192.168.8.149
Host is up (0.00028s latency).
Nmap scan report for 192.168.8.150
Host is up (0.0076s latency).
Nmap scan report for 192.168.8.151
Host is up (0.0075s latency).
Nmap scan report for 192.168.8.152
Host is up (0.0074s latency).
Nmap scan report for 192.168.8.153
Host is up (0.00019s latency).
Nmap scan report for 192.168.8.154
Host is up (0.057s latency).
Nmap scan report for 192.168.8.155
Host is up (0.016s latency).
Nmap scan report for 192.168.8.156
Host is up (0.0091s latency).
Nmap scan report for 192.168.8.157
Host is up (0.0090s latency).
Nmap scan report for 192.168.8.158
Host is up (0.0089s latency).
Nmap scan report for 192.168.8.159
Host is up (0.00017s latency).
Nmap scan report for 192.168.8.160
Host is up (0.00023s latency).
Nmap scan report for 192.168.8.161
Host is up (0.0088s latency).
Nmap scan report for 192.168.8.162
Host is up (0.015s latency).
Nmap scan report for 192.168.8.163
Host is up (0.015s latency).
Nmap scan report for 192.168.8.164
Host is up (0.00014s latency).
Nmap scan report for 192.168.8.165
Host is up (0.057s latency).
Nmap scan report for 192.168.8.166
Host is up (0.013s latency).
Nmap scan report for 192.168.8.167
Host is up (0.29s latency).
Nmap scan report for 192.168.8.168
Host is up (0.013s latency).
Nmap scan report for 192.168.8.169
Host is up (0.013s latency).
Nmap scan report for 192.168.8.170
Host is up (0.00020s latency).
Nmap scan report for 192.168.8.171
Host is up (0.0032s latency).
Nmap scan report for 192.168.8.172
Host is up (0.0039s latency).
Nmap scan report for 192.168.8.173
Host is up (0.012s latency).
Nmap scan report for 192.168.8.174
Host is up (0.0020s latency).
Nmap scan report for 192.168.8.175
Host is up (0.0038s latency).
Nmap scan report for 192.168.8.176
Host is up (0.014s latency).
Nmap scan report for 192.168.8.177
Host is up (0.057s latency).
Nmap scan report for 192.168.8.178
Host is up (0.0030s latency).
Nmap scan report for 192.168.8.179
Host is up (0.0059s latency).
Nmap scan report for 192.168.8.180
Host is up (0.057s latency).
Nmap scan report for 192.168.8.181
Host is up (0.0037s latency).
Nmap scan report for 192.168.8.182
Host is up (0.0039s latency).
Nmap scan report for 192.168.8.183
Host is up (0.0043s latency).
Nmap scan report for 192.168.8.184
Host is up (0.0036s latency).
Nmap scan report for 192.168.8.185
Host is up (0.0058s latency).
Nmap scan report for 192.168.8.186
Host is up (0.057s latency).
Nmap scan report for 192.168.8.187
Host is up (0.0034s latency).
Nmap scan report for 192.168.8.188
Host is up (0.0026s latency).
Nmap scan report for 192.168.8.189
Host is up (0.0050s latency).
Nmap scan report for 192.168.8.190
Host is up (0.0033s latency).
Nmap scan report for 192.168.8.191
Host is up (0.014s latency).
Nmap scan report for 192.168.8.192
Host is up (0.014s latency).
Nmap scan report for 192.168.8.193
Host is up (0.014s latency).
Nmap scan report for 192.168.8.194
Host is up (0.014s latency).
Nmap scan report for 192.168.8.195
Host is up (0.014s latency).
Nmap scan report for 192.168.8.196
Host is up (0.014s latency).
Nmap scan report for 192.168.8.197
Host is up (0.0034s latency).
Nmap scan report for 192.168.8.198
Host is up (0.014s latency).
Nmap scan report for 192.168.8.199
Host is up (0.0032s latency).
Nmap scan report for 192.168.8.200
Host is up (0.0031s latency).
Nmap scan report for 192.168.8.201
Host is up (0.089s latency).
Nmap scan report for 192.168.8.202
Host is up (0.0089s latency).
Nmap scan report for 192.168.8.203
Host is up (0.0087s latency).
Nmap scan report for 192.168.8.204
Host is up (0.0086s latency).
Nmap scan report for 192.168.8.205
Host is up (0.085s latency).
Nmap scan report for 192.168.8.206
Host is up (0.089s latency).
Nmap scan report for 192.168.8.207
Host is up (0.0081s latency).
Nmap scan report for 192.168.8.208
Host is up (0.0029s latency).
Nmap scan report for 192.168.8.209
Host is up (0.0028s latency).
Nmap scan report for 192.168.8.210
Host is up (0.0079s latency).
Nmap scan report for 192.168.8.211
Host is up (0.085s latency).
Nmap scan report for 192.168.8.212
Host is up (0.085s latency).
Nmap scan report for 192.168.8.213
Host is up (0.088s latency).
Nmap scan report for 192.168.8.214
Host is up (0.088s latency).
Nmap scan report for 192.168.8.215
Host is up (0.083s latency).
Nmap scan report for 192.168.8.216
Host is up (0.087s latency).
Nmap scan report for 192.168.8.217
Host is up (0.10s latency).
Nmap scan report for 192.168.8.218
Host is up (0.10s latency).
Nmap scan report for 192.168.8.219
Host is up (0.0027s latency).
Nmap scan report for 192.168.8.220
Host is up (0.0062s latency).
Nmap scan report for 192.168.8.221
Host is up (0.10s latency).
Nmap scan report for 192.168.8.222
Host is up (0.10s latency).
Nmap scan report for 192.168.8.223
Host is up (0.088s latency).
Nmap scan report for 192.168.8.224
Host is up (0.088s latency).
Nmap scan report for 192.168.8.225
Host is up (0.014s latency).
Nmap scan report for 192.168.8.226
Host is up (0.094s latency).
Nmap scan report for 192.168.8.227
Host is up (0.083s latency).
Nmap scan report for 192.168.8.228
Host is up (0.088s latency).
Nmap scan report for 192.168.8.229
Host is up (0.013s latency).
Nmap scan report for 192.168.8.230
Host is up (0.088s latency).
Nmap scan report for 192.168.8.231
Host is up (0.0029s latency).
Nmap scan report for 192.168.8.232
Host is up (0.086s latency).
Nmap scan report for 192.168.8.233
Host is up (0.0037s latency).
Nmap scan report for 192.168.8.234
Host is up (0.0025s latency).
Nmap scan report for 192.168.8.235
Host is up (0.059s latency).
Nmap scan report for 192.168.8.236
Host is up (0.059s latency).
Nmap scan report for 192.168.8.237
Host is up (0.059s latency).
Nmap scan report for 192.168.8.238
Host is up (0.067s latency).
Nmap scan report for 192.168.8.239
Host is up (0.087s latency).
Nmap scan report for 192.168.8.240
Host is up (0.016s latency).
Nmap scan report for 192.168.8.241
Host is up (0.061s latency).
Nmap scan report for 192.168.8.242
Host is up (0.060s latency).
Nmap scan report for 192.168.8.243
Host is up (0.086s latency).
Nmap scan report for 192.168.8.244
Host is up (0.030s latency).
Nmap scan report for 192.168.8.245
Host is up (0.060s latency).
Nmap scan report for 192.168.8.246
Host is up (0.060s latency).
Nmap scan report for 192.168.8.247
Host is up (0.060s latency).
Nmap scan report for 192.168.8.248
Host is up (0.087s latency).
Nmap scan report for 192.168.8.249
Host is up (0.087s latency).
Nmap scan report for 192.168.8.250
Host is up (0.060s latency).
Nmap scan report for 192.168.8.251
Host is up (0.087s latency).
Nmap scan report for 192.168.8.252
Host is up (0.011s latency).
Nmap scan report for 192.168.8.253
Host is up (0.090s latency).
Nmap scan report for 192.168.8.254
Host is up (0.090s latency).
Nmap scan report for 192.168.8.255
Host is up (0.023s latency).
Nmap done: 256 IP addresses (256 hosts up) scanned in 4.72 seconds

可以看到共有256台主机是存活的。

如在我的虚拟机上，执行如下命令

[root@localhost ~]# nmap -sS 192.168.254.137

Starting Nmap 6.40 ( http://nmap.org ) at 2018-07-10 14:37 CST
Nmap scan report for 192.168.254.137
Host is up (0.0000090s latency).
Not shown: 998 closed ports
PORT   STATE SERVICE
22/tcp open  ssh
80/tcp open  http

Nmap done: 1 IP address (1 host up) scanned in 0.16 seconds

可知我的22远程端口是开发的，并且我的80端口是开放的。使用netstat也可以查看到

[root@localhost ~]# netstat -ltpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      933/nginx: master p 
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      913/sshd            
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      1029/master         
tcp6       0      0 :::22                   :::*                    LISTEN      913/sshd            
tcp6       0      0 ::1:25                  :::*                    LISTEN      1029/master

默认扫描的端口是在0-1024，我们也可以加入-p参数扫描端口范围。

[root@localhost ~]# nmap -sS -p 0-30000 192.168.254.137

Starting Nmap 6.40 ( http://nmap.org ) at 2018-07-10 14:44 CST
Nmap scan report for 192.168.254.137
Host is up (0.0000090s latency).
Not shown: 29999 closed ports
PORT   STATE SERVICE
22/tcp open  ssh
80/tcp open  http

Nmap done: 1 IP address (1 host up) scanned in 0.97 seconds

使用-sT参数可以更真实模拟TCP的三次握手请求，一般用时会更大些。而-sU则比较少用，而且跟linux内核有些不同，很多时候会等待很长时间。

android系统selinux中添加新属性property 辉色投像
1.定位/android/system/sepolicy/private/property_contexts声明属性开头：persist.charge声明属性类型：u:object_r:system_prop:s0图12.定位到android/system/sepolicy/public/domain.te删除neverallow{domain-init}default_prop:property
Linux下QT开发的动态库界面弹出操作（SDL2） 13jjyao QT类 qt 开发语言 sdl2 linux
需求：操作系统为linux，开发框架为qt，做成需带界面的qt动态库，调用方为java等非qt程序难点：调用方为java等非qt程序，也就是说调用方肯定不带QApplication::exec()，缺少了这个，QTimer等事件和QT创建的窗口将不能弹出(包括opencv也是不能弹出)；这与qt调用本身qt库是有本质的区别的思路：1.调用方缺QApplication::exec()，那么我们在接口
linux sdl windows.h,Windows下的SDL安装奔跑吧linux内核 linux sdl windows.h
首先你要下载并安装SDL开发包。如果装在C盘下，路径为C:\SDL1.2.5如果在WINDOWS下。你可以按以下步骤：1.打开VC++，点击"Tools",Options2,点击directories选项3.选择"Includefiles"增加一个新的路径。"C:\SDL1.2.5\include"4，现在选择"Libaryfiles“增加"C:\SDL1.2.5\lib"现在你可以开始编写你的第
linux中sdl的使用教程,sdl使用入门 Melissa Corvinus linux中sdl的使用教程
本文通过一个简单示例讲解SDL的基本使用流程。示例中展示一个窗口，窗口里面有个随机颜色快随机移动。当我们鼠标点击关闭按钮时间窗口关闭。基本步骤如下：1.初始化SDL并创建一个窗口。SDL_Init()初始化SDL_CreateWindow()创建窗口2.纹理渲染存储RGB和存储纹理的区别：比如一个从左到右由红色渐变到蓝色的矩形，用存储RGB的话就需要把矩形中每个点的具体颜色值存储下来；而纹理只是一
PHP环境搭建详细教程好看资源平台前端 php
PHP是一个流行的服务器端脚本语言，广泛用于Web开发。为了使PHP能够在本地或服务器上运行，我们需要搭建一个合适的PHP环境。本教程将结合最新资料，介绍在不同操作系统上搭建PHP开发环境的多种方法，包括Windows、macOS和Linux系统的安装步骤，以及本地和Docker环境的配置。1.PHP环境搭建概述PHP环境的搭建主要分为以下几类：集成开发环境：例如XAMPP、WAMP、MAMP，这
使用 FinalShell 进行远程连接（ssh 远程连接 Linux 服务器）编程经验分享开发工具服务器 ssh linux
目录前言基本使用教程新建远程连接连接主机自定义命令路由追踪前言后端开发，必然需要和服务器打交道，部署应用，排查问题，查看运行日志等等。一般服务器都是集中部署在机房中，也有一些直接是云服务器，总而言之，程序员不可能直接和服务器直接操作，一般都是通过ssh连接来登录服务器。刚接触远程连接时，使用的是XSHELL来远程连接服务器，连接上就能够操作远程服务器了，但是仅用XSHELL并没有上传下载文件的功能
libyuv之linux编译 jaronho Linux linux 运维服务器
文章目录一、下载源码二、编译源码三、注意事项1、银河麒麟系统（aarch64）（1）解决armv8-a+dotprod+i8mm指令集支持问题（2）解决armv9-a+sve2指令集支持问题一、下载源码到GitHub网站下载https://github.com/lemenkov/libyuv源码，或者用直接用git克隆到本地，如：gitclonehttps://github.com/lemenko
ARM驱动学习之5 LEDS驱动 JT灬新一嵌入式 C 底层 arm开发学习单片机
ARM驱动学习之5LEDS驱动知识点：•linuxGPIO申请函数和赋值函数–gpio_request–gpio_set_value•三星平台配置GPIO函数–s3c_gpio_cfgpin•GPIO配置输出模式的宏变量–S3C_GPIO_OUTPUT注意点：DRIVER_NAME和DEVICE_NAME匹配。实现步骤：1.加入需要的头文件：//Linux平台的gpio头文件#include//三
【华为OD技术面试真题精选 - 非技术题】 -HR面，综合面_华为od hr面一个射手座的程序媛程序员华为od 面试职场和发展
最后的话最近很多小伙伴找我要Linux学习资料，于是我翻箱倒柜，整理了一些优质资源，涵盖视频、电子书、PPT等共享给大家！资料预览给大家整理的视频资料：给大家整理的电子书资料：如果本文对你有帮助，欢迎点赞、收藏、转发给朋友，让我有持续创作的动力！网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。需要这份系统化的资料的朋友，可以点击这里获
简介Shell、zsh、bash zhaosuningsn Shell zsh bash shell linux bash
Shell是Linux和Unix的外壳，类似衣服，负责外界与Linux和Unix内核的交互联系。例如接收终端用户及各种应用程序的命令，把接收的命令翻译成内核能理解的语言，传递给内核，并把内核处理接收的命令的结果返回给外界，即Shell是外界和内核沟通的桥梁或大门。Linux和Unix提供了多种Shell，其中有种bash，当然还有其他好多种。Mac电脑中不但有bash，还有一个zsh，预装的，据说
Linux MariaDB使用OpenSSL安装SSL证书 Meta39 MySQL Oracle MariaDB Linux Windows ssl linux mariadb
进入到证书存放目录，批量删除.pem证书警告：确保已经进入到证书存放目录find.-typef-iname\*.pem-delete查看是否安装OpenSSLopensslversion没有则安装yuminstallopensslopenssl-devel开启SSL编辑/etc/my.cnf文件（没有的话就创建，但是要注意，在/etc/my.cnf.d/server.cnf配置了datadir的，
【从浅识到熟知Linux】Linux发展史 Jammingpro 从浅学到熟知Linux linux 运维服务器
归属专栏：从浅学到熟知Linux个人主页：Jammingpro每日努力一点点，技术变化看得见文章前言：本篇文章记录Linux发展的历史，因在介绍Linux过程中涉及的其他操作系统及人物，本文对相关内容也有所介绍。文章目录Unix发展史Linux发展史开源Linux官网企业应用情况发行版本在学习Linux前，我们可能都会问Linux从哪里来？它是如何发展的。但在介绍Linux之前，需要先介绍一下Un
linux 发展史种树的猴子内核 java 操作系统 linux 大数据
linux发展史说明此前对linux认识模糊一知半解，近期通过学习将自己对于linux的发展总结一下方便大家日后的学习。那Linux是目前一款非常火热的开源操作系统，可是linux是什么时候出现的，又是因为什么样的原因被开发出来的呢。以下将对linux的发展历程进行详细的讲解。目录一、Linux发展背景二、UINIX的诞生三、UNIX的重要分支-BSD的诞生四、Minix的诞生五、GNU与Free
Linux sh命令 fengyehongWorld Linux linux
目录一.基本语法二.选项2.1-c字符串中读取内容，并执行2.1.1基本用法2.1.2获取当前目录下失效的超链接2.2-x每个命令执行之前，将其打印出来2.3结合Here文档使用一.基本语法⏹Linux和Unix系统中用于执行shell脚本或运行命令的命令。sh[选项][脚本文件][参数...]⏹选项-c：从字符串中读取内容，并执行。-x：在每个命令执行之前，将其打印出来。-s：从标准流中读取内容
Linux vi常用命令 fengyehongWorld Linux linux
参考资料viコマンド（vimコマンド）リファレンス目录一.保存系命令二.删除系命令三.移动系命令四.复制粘贴系命令一.保存系命令⏹保存并退出:wq⏹强制保存并退出:wq!⏹退出(文件未编辑):q⏹强制退出(忽略已编辑内容):q!⏹另存为:w新文件名二.删除系命令⏹删除当前行dd⏹清空整个文档gg：移动到文档顶部dG：删除到最后一行ggdG三.移动系命令⏹移动到文档顶部gg⏹移动到文档底部#方式1G
Linux查看服务器日志 TPBoreas 运维 linux 运维
一、tail这个是我最常用的一种查看方式用法如下：tail-n10test.log查询日志尾部最后10行的日志;tail-n+10test.log查询10行之后的所有日志;tail-fn10test.log循环实时查看最后1000行记录(最常用的)一般还会配合着grep用，(实时抓包)例如:tail-fn1000test.log|grep'关键字'（动态抓包）tail-fn1000test.log
笋丁网页自动回复机器人V3.0.0免授权版源码希希分享软希网58soho_cn 源码资源笋丁网页自动回复机器人
笋丁网页机器人一款可设置自动回复，默认消息，调用自定义api接口的网页机器人。此程序后端语言使用Golang，内存占用最高不超过30MB，1H1G服务器流畅运行。仅支持Linux服务器部署，不支持虚拟主机，请悉知！使用自定义api功能需要有一定的建站基础。源码下载：https://download.csdn.net/download/m0_66047725/89754250更多资源下载：关注我。安
Linux CTF逆向入门蚁景网络安全 linux 运维 CTF
1.ELF格式我们先来看看ELF文件头，如果想详细了解，可以查看ELF的manpage文档。关于ELF更详细的说明：e_shoff：节头表的文件偏移量（字节）。如果文件没有节头表，则此成员值为零。sh_offset：表示了该section（节）离开文件头部位置的距离+-------------------+|ELFheader|---++--------->+-------------------
NPM私库搭建-verdaccio（Linux） Beam007 npm linux 前端
1、安装nodelinux服务器安装nodea)、官网下载所需的node版本https://nodejs.org/dist/v14.21.0/b)、解压安装包若下载的是xxx.tar.xz文件，解压命令为tar-xvfxxx.tar.xzc)、修改环境变量修改：/etc/profile文件#SETPATHFORNODEJSexportNODE_HOME=NODEJS解压安装的路径exportPAT
C++常见知识掌握 nfgo c++开发语言
1.Linux软件开发、调试与维护内核与系统结构Linux内核是操作系统的核心，负责管理硬件资源，提供系统服务，它是系统软件与硬件之间的桥梁。主要组成部分包括：进程管理：内核通过调度器分配CPU时间给各个进程，实现进程的创建、调度、终止等操作。使用进程描述符（task_struct）来存储进程信息，包括状态（就绪、运行、阻塞等）、优先级、内存映射等。内存管理：包括物理内存和虚拟内存管理。通过页表映
linux脚本sed替换变量,sed 命令中替换值为shell变量诺坎普之约 linux脚本sed替换变量
文章目录sed命令中替换值为shell变量替换基本语法sed中替换使用shell变量总结参考文档sed命令中替换值为shell变量替换基本语法大家都是sed有很多用法，最多就应该是替换一些值了。让我们先回忆sed的替换语法。在sed进行替换的时候sed-i's/old/new/g'1.txtecho"hellooldfrank"|sed's/old/new/g'结果如下：hellonewfrank
RK3229_Android9.0_Box 4G模块EC200A调试 suifen_ 网络
0、kernel修改这部分完全可以参考Linux的移植：RK3588EC200A-CN【4G模块】调试_rkec200a-cn-CSDN博客1、修改device/rockchip/rk322xdiff--gita/device.mkb/device.mkindexec6bfaa..e7c32d1100755---a/device.mk+++b/device.mk@@-105,6+105,8@@en
linux 安装Sublime Text 3 hhyiyuanyu Python学习 linux sublime text
方法/步骤打开官网http://www.sublimetext.com/3，选择64位进行下载执行命令wgethttps://download.sublimetext.com/sublime_text_3_build_3126_x64.tar.bz2进行下载3、下载完成进行解压,执行tar-xvvfsublime_text_3_build_3126_x64.tar.bz解压4、解压完成以后，移动到
KVM虚拟机源代码分析【转】 xidianjiapei001 #虚拟化技术
1.KVM结构及工作原理1.1KVM结构KVM基本结构有两部分组成。一个是KVMDriver，已经成为Linux内核的一个模块。负责虚拟机的创建，虚拟内存的分配，虚拟CPU寄存器的读写以及虚拟CPU的运行等。另外一个是稍微修改过的Qemu，用于模拟PC硬件的用户空间组件，提供I/O设备模型以及访问外设的途径。KVM基本结构如图1所示。其中KVM加入到标准的Linux内核中，被组织成Linux中标准
史上最全git命令,git回滚,git命令大全騒周其他 git
git命令大全一、Git整体理解二、由暂存区本地仓库三、由本地仓->远程仓库四、冲突处理五、Git分支操作六、bug的分支七、feature分支八、暂存的使用九、远程仓的操作十、标签的使用十一、Git配置全局信息十二、Linux的一些简单操作和一些符号的解释十三、符号解释十四、显示安装详细信息十五、gitconfig十六、Gitclone十七、Gitinit十八、gitstatus十九、gitre
【显示后台运行 & 的命令】晨春计 debug linux 服务器运维
目录背景步骤详解示例背景当你在Linuxshell中使用&符号将一个命令放到后台运行时，你可以使用jobs命令来查看这些后台进程的状态。但是，jobs命令并不会直接显示进程的PID（进程ID）。它会显示一个作业列表，其中包括每个作业的状态和一个作业标识符（通常是百分号%后面跟着一个数字），但不会直接显示PID。获取后台进程的PID步骤：1、使用jobs命令查看后台作业。2、使用ps命令配合grep
Android shell 常用 debug 命令晨春计 Audio debug android linux
目录1、查看版本2、am命令3、pm命令4、dumpsys命令5、sed命令6、log定位查看APK进程号7、log定位使用场景1、查看版本1.1、Android串口终端执行getpropro.build.version.release#获取Android版本uname-a#查看linux内核版本信息uname-r#单独查看内核版本1.2、linux服务器执行lsb_release-a#查看Lin
【nginx】ngx_http_proxy_connect_module 正向代理等风来不如迎风去网络服务入门与实战 nginx http 运维
50.65无法访问服务器，(403错误)50.196可以访问服务器。那么，配置65通过196访问。需要一个nginx作为代理【nginx】搭配okhttp配置反向代理发送原生的nginx是不支持okhttp的CONNECT请求的。大神竟然给出了一个java工程GINX编译ngx_http_proxy_connect_module及做正向代理是linux构建的。是windows构建的：编译Windo
linux下好用的任务管理器htop WittXie Linux linux 服务器运维
给大家推荐个好用的任务管理器htop，简直好用的不得了。完虐top。不解释了，看文章！！！在Linux系统中，top命令用来显示系统中正在运行的进程的实时状态，它显示了一些非常有用的信息，比如CPU利用情况、内存消耗情况，以及每个进程情况等。但是，你知道吗？还有另外一个命令行工具'htop'，它与传统的top命令功能一样，但它有更加强大的功能及能显示更多的信息。这篇文章，我们会用实例来讨论这个'h
Linux下使用U盘 WittXie Linux linux 运维服务器
第一步：插入U盘，如果能够识别出U盘，则会打印出一些信息；第二步：查看U盘系统分配给U盘的设备名；输入如下命令进行查看：fdisk-l/dev/sda如果打印出如下信息：Disk/dev/sda:4233MB,4233101312bytes165heads,34sectors/track,1473cylindersUnits=cylindersof5610*512=2872320bytesDevi
java类加载顺序 3213213333332132 java
package com.demo; /** * @Description 类加载顺序 * @author FuJianyong * 2015-2-6上午11:21:37 */ public class ClassLoaderSequence { String s1 = "成员属性"; static String s2 = "
Hibernate与mybitas的比较 BlueSkator sql Hibernate 框架 ibatis orm
第一章 Hibernate与MyBatis Hibernate 是当前最流行的O/R mapping框架，它出身于sf.net，现在已经成为Jboss的一部分。 Mybatis 是另外一种优秀的O/R mapping框架。目前属于apache的一个子项目。 MyBatis 参考资料官网：http:
php多维数组排序以及实际工作中的应用 dcj3sjt126com PHP usort uasort
自定义排序函数返回false或负数意味着第一个参数应该排在第二个参数的前面, 正数或true反之, 0相等usort不保存键名uasort 键名会保存下来uksort 排序是对键名进行的 <!doctype html> <html lang="en"> <head> <meta charset="utf-8&q
DOM改变字体大小周华华前端
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml&q
c3p0的配置 g21121 c3p0
c3p0是一个开源的JDBC连接池，它实现了数据源和JNDI绑定，支持JDBC3规范和JDBC2的标准扩展。c3p0的下载地址是：http://sourceforge.net/projects/c3p0/这里可以下载到c3p0最新版本。以在spring中配置dataSource为例：  <bean name="prope
Java获取工程路径的几种方法 510888780 java
第一种： File f = new File(this.getClass().getResource("/").getPath()); System.out.println(f); 结果: C:\Documents%20and%20Settings\Administrator\workspace\projectName\bin 获取当前类的所在工程路径; 如果不加“
在类Unix系统下实现SSH免密码登录服务器 Harry642 免密 ssh
1.客户机 (1)执行ssh-keygen -t rsa -C "[email protected]"生成公钥，xxx为自定义大email地址 (2)执行scp ~/.ssh/id_rsa.pub root@xxxxxxxxx:/tmp将公钥拷贝到服务器上，xxx为服务器地址 (3)执行cat
Java新手入门的30个基本概念一 aijuans java java 入门新手
在我们学习Java的过程中,掌握其中的基本概念对我们的学习无论是J2SE,J2EE,J2ME都是很重要的,J2SE是Java的基础,所以有必要对其中的基本概念做以归纳,以便大家在以后的学习过程中更好的理解java的精髓,在此我总结了30条基本的概念。　　Java概述:　　目前Java主要应用于中间件的开发(middleware)---处理客户机于服务器之间的通信技术,早期的实践证明,Java不适合
Memcached for windows 简单介绍 antlove java Web windows cache memcached
1. 安装memcached server a. 下载memcached-1.2.6-win32-bin.zip b. 解压缩，dos 窗口切换到 memcached.exe所在目录，运行memcached.exe -d install c.启动memcached Server,直接在dos窗口键入 net start "memcached Server&quo
数据库对象的视图和索引百合不是茶索引 oeacle数据库视图
视图视图是从一个表或视图导出的表，也可以是从多个表或视图导出的表。视图是一个虚表，数据库不对视图所对应的数据进行实际存储，只存储视图的定义，对视图的数据进行操作时,只能将字段定义为视图,不能将具体的数据定义为视图为什么oracle需要视图; &
Mockito(一) --入门篇 bijian1013 持续集成 mockito 单元测试
Mockito是一个针对Java的mocking框架，它与EasyMock和jMock很相似，但是通过在执行后校验什么已经被调用，它消除了对期望行为（expectations）的需要。其它的mocking库需要你在执行前记录期望行为（expectations），而这导致了丑陋的初始化代码。 &nb
精通Oracle10编程SQL(5)SQL函数 bijian1013 oracle 数据库 plsql
/* * SQL函数 */ --数字函数 --ABS(n):返回数字n的绝对值 declare v_abs number(6,2); begin v_abs:=abs(&no); dbms_output.put_line('绝对值：'||v_abs); end; --ACOS(n):返回数字n的反余弦值，输入值的范围是-1~1，输出值的单位为弧度
【Log4j一】Log4j总体介绍 bit1129 log4j
Log4j组件：Logger、Appender、Layout Log4j核心包含三个组件：logger、appender和layout。这三个组件协作提供日志功能：日志的输出目标日志的输出格式日志的输出级别(是否抑制日志的输出) logger继承特性 A logger is said to be an ancestor of anothe
Java IO笔记白糖_ java
public static void main(String[] args) throws IOException { //输入流 InputStream in = Test.class.getResourceAsStream("/test"); InputStreamReader isr = new InputStreamReader(in); Bu
Docker 监控 ronin47 docker监控
目前项目内部署了docker，于是涉及到关于监控的事情，参考一些经典实例以及一些自己的想法，总结一下思路。 1、关于监控的内容监控宿主机本身监控宿主机本身还是比较简单的，同其他服务器监控类似，对cpu、network、io、disk等做通用的检查，这里不再细说。额外的，因为是docker的
java-顺时针打印图形 bylijinnan java
一个画图程序要求打印出： 1.int i=5; 2.1 2 3 4 5 3.16 17 18 19 6 4.15 24 25 20 7 5.14 23 22 21 8 6.13 12 11 10 9 7. 8.int i=6 9.1 2 3 4 5 6 10.20 21 22 23 24 7 11.19
关于iReport汉化版强制使用英文的配置方法 Kai_Ge iReport汉化英文版
对于那些具有强迫症的工程师来说，软件汉化固然好用，但是汉化不完整却极为头疼，本方法针对iReport汉化不完整的情况，强制使用英文版，方法如下：在 iReport 安装路径下的 etc/ireport.conf 里增加红色部分启动参数，即可变为英文版。 # ${HOME} will be replaced by user home directory accordin
[并行计算]论宇宙的可计算性 comsci 并行计算
现在我们知道,一个涡旋系统具有并行计算能力.按照自然运动理论,这个系统也同时具有存储能力,同时具备计算和存储能力的系统,在某种条件下一般都会产生意识...... 那么,这种概念让我们推论出一个结论 &nb
用OpenGL实现无限循环的coverflow dai_lm android coverflow
网上找了很久，都是用Gallery实现的，效果不是很满意，结果发现这个用OpenGL实现的，稍微修改了一下源码，实现了无限循环功能源码地址： https://github.com/jackfengji/glcoverflow public class CoverFlowOpenGL extends GLSurfaceView implements GLSurfaceV
JAVA数据计算的几个解决方案1 datamachine java Hibernate 计算
老大丢过来的软件跑了10天，摸到点门道，正好跟以前攒的私房有关联，整理存档。 -----------------------------华丽的分割线------------------------------------- 数据计算层是指介于数据存储和应用程序之间，负责计算数据存储层的数据，并将计算结果返回应用程序的层次。J &nbs
简单的用户授权系统,利用给user表添加一个字段标识管理员的方式 dcj3sjt126com yii
怎么创建一个简单的(非 RBAC)用户授权系统通过查看论坛，我发现这是一个常见的问题，所以我决定写这篇文章。本文只包括授权系统.假设你已经知道怎么创建身份验证系统(登录)。数据库首先在 user 表创建一个新的字段(integer 类型),字段名 'accessLevel',它定义了用户的访问权限扩展 CWebUser 类在配置文件(一般为 protecte
未选之路 dcj3sjt126com 诗
作者:罗伯特*费罗斯特黄色的树林里分出两条路, 可惜我不能同时去涉足, 我在那路口久久伫立, 我向着一条路极目望去, 直到它消失在丛林深处. 但我却选了另外一条路, 它荒草萋萋,十分幽寂; 显得更诱人,更美丽, 虽然在这两条小路上, 都很少留下旅人的足迹. 那天清晨落叶满地, 两条路都未见脚印痕迹. 呵,留下一条路等改日再
Java处理15位身份证变18位蕃薯耀 18位身份证变15位 15位身份证变18位身份证转换
15位身份证变18位，18位身份证变15位 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 蕃薯耀 201
SpringMVC4零配置--应用上下文配置【AppConfig】 hanqunfeng springmvc4
从spring3.0开始，Spring将JavaConfig整合到核心模块，普通的POJO只需要标注@Configuration注解，就可以成为spring配置类，并通过在方法上标注@Bean注解的方式注入bean。 Xml配置和Java类配置对比如下： applicationContext-AppConfig.xml <!-- 激活自动代理功能参看：
Android中webview跟JAVASCRIPT中的交互 jackyrong JavaScript html android 脚本
在android的应用程序中,可以直接调用webview中的javascript代码,而webview中的javascript代码,也可以去调用ANDROID应用程序(也就是JAVA部分的代码).下面举例说明之: 1 JAVASCRIPT脚本调用android程序要在webview中,调用addJavascriptInterface(OBJ,int
8个最佳Web开发资源推荐 lampcy 编程 Web 程序员
Web开发对程序员来说是一项较为复杂的工作，程序员需要快速地满足用户需求。如今很多的在线资源可以给程序员提供帮助，比如指导手册、在线课程和一些参考资料，而且这些资源基本都是免费和适合初学者的。无论你是需要选择一门新的编程语言，或是了解最新的标准，还是需要从其他地方找到一些灵感，我们这里为你整理了一些很好的Web开发资源，帮助你更成功地进行Web开发。这里列出10个最佳Web开发资源，它们都是受
架构师之面试------jdk的hashMap实现 nannan408 HashMap
1.前言。如题。 2.详述。 (1)hashMap算法就是数组链表。数组存放的元素是键值对。jdk通过移位算法（其实也就是简单的加乘算法），如下代码来生成数组下标(生成后indexFor一下就成下标了）。 static int hash(int h) { h ^= (h >>> 20) ^ (h >>>
html禁止清除input文本输入缓存 Rainbow702 html 缓存 input 输入框 change
多数浏览器默认会缓存input的值，只有使用ctl+F5强制刷新的才可以清除缓存记录。如果不想让浏览器缓存input的值，有2种方法：方法一：在不想使用缓存的input中添加 autocomplete="off"; <input type="text" autocomplete="off" n
POJO和JavaBean的区别和联系 tjmljw POJO java beans
POJO 和JavaBean是我们常见的两个关键字，一般容易混淆，POJO全称是Plain Ordinary Java Object / Pure Old Java Object，中文可以翻译成：普通Java类，具有一部分getter/setter方法的那种类就可以称作POJO，但是JavaBean则比 POJO复杂很多， Java Bean 是可复用的组件，对 Java Bean 并没有严格的规
java中单例的五种写法 liuxiaoling java 单例
/** * 单例模式的五种写法： * 1、懒汉 * 2、恶汉 * 3、静态内部类 * 4、枚举 * 5、双重校验锁 */ /** * 五、双重校验锁，在当前的内存模型中无效 */ class LockSingleton { private volatile static LockSingleton singleton; pri

nmap命令的详解

你可能感兴趣的:(linux)