centos 6.2 keepalived/haproxy 安装测试

http://www.bitbi.biz/centos-6-2-keepalivedhaproxy-%E5%AE%89%E8%A3%85%E6%B5%8B%E8%AF%95-2912/

Haproxy 不用多说了，她可以做4/7层代理，本文是利用Haproxy的7层代理与Keepalived实现一个负载均衡器

1.系统

OS：centos6.2(64bit)
MASTER:192.168.1.67
BACKUP:192.168.1.68
VIP:192.168.1.100
Service Port:8080

2.系统日志配置

vi /etc/rsyslog.conf
#加入以下四行

$ModLoad imudp.so
$UDPServerRun 514
$UDPServerAddress 127.0.0.1
local2.* /var/log/haproxy.log

3.关闭SELINUX

sed -i 's:SELINUX=enforcing:SELINUX=disabled:g' /etc/selinux/config

4.添加VRRP通讯支持到iptables里

iptables -A INPUT -d 224.0.0.18 -j ACCEPT

 

5.安装Haproxy

#先安装epel包
yum install haproxy

#上面安装好了这步就可跳过,haproxy编译安装，
#mkdir -p /home/install/keepalived1
#cd /home/install/keepalive1
#wget http://haproxy.1wt.eu/download/1.4/src/haproxy-1.4.18.tar.gz
#tar -zxvf haproxy-1.4.18.tar.gz
#cd haproxy-1.4.18
#make install
#mkdir -p /usr/local/haproxy/etc
#mkdir -p /usr/local/haproxy/sbin
#cp examples/haproxy.cfg /usr/local/haproxy/etc
#ln -s /usr/local/sbin/haproxy /usr/local/haproxy/sbin/haproxy

#查看haproxy配置
cat /etc/haproxy/haproxy .cfg
#全局配置
global
 log 127.0.0.1 local2
 chroot /var/lib/haproxy
 pidfile /var/run/haproxy .pid
 maxconn 4000
 user haproxy
 group haproxy
 daemon
 # turn on stats unix socket
 #stats socket /var/lib/haproxy/stats
########默认配置############
defaults
 #默认的模式mode { tcp|http|health }，tcp是4层，http是7层，health只会返回OK
 mode http
 log global
 #option http-server-close
 #option forwardfor except 127.0.0.0/8
 option httplog
 #两次连接失败就认为是服务器不可用，也可以通过后面设置
 retries 3
 option dontlognull
 #当serverId对应的服务器挂掉后，强制定向到其他健康的服务器
 option redispatch
 #当服务器负载很高的时候，自动结束掉当前队列处理比较久的链接
 option abortonclose
 #默认的最大连接数
 maxconn 2000
 timeout http-keep-alive 10s
 timeout queue 1m
 #连接超时
 timeout connect 5000ms
 #客户端超时
 timeout client 30000ms
 #服务器超时
 timeout server 30000ms
 #心跳检测超时
 timeout check 5s
########test1配置#################
listen test1 192.168.1.100:8080
 mode http
 option httplog
 balance roundrobin
 server s1 192.168.1.59:8080 maxconn 2000 check   inter 10s fall 1 rise 2
 server s2 192.168.1.60:8080 maxconn 2000 check inter 10s fall 1 rise 2
########统计页面配置########
listen admin_stats
 stats enable
 #监听端口
 bind 192.168.1.67:8000
 #http的7层模式
 mode http
 #采用http日志格式
 option httplog
 log global
 maxconn 10
 #统计页面自动刷新时间
 stats refresh 30s
 #统计页面url
 stats uri /stats
 #统计页面密码框上提示文本
 stats realm DW- test -Haproxy
 #统计页面用户名和密码设置,还是要修改一下的
 stats auth admin:admin
 stats admin if TRUE
 #隐藏统计页面上HAProxy的版本信息
 stats hide-version
#haproxy配置结束

#
#
#
#运行haproxy
/etc/init .d /haproxy start #测试一下

6.安装Keepalived(当然你也可以#yum install keepalived,但要先安装epel的包)

mkdir -p /home/install/keepalived1
cd /home/install/keepalived1
wget http: //www .keepalived.org /software/keepalived-1 .2.2. tar .gz
tar zxvf keepalived-1.2.2. tar .gz
cd keepalived-1.2.2
. /configure
make && make install

cp /usr/local/etc/rc .d /init .d /keepalived /etc/rc .d /init .d/
cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
mkdir /etc/keepalived
cp /usr/local/etc/keepalived/keepalived .conf /etc/keepalived/
cp /usr/local/sbin/keepalived /usr/sbin/

#keepalived配置
cat /etc/keepalived/keepalived .conf
global_defs {
 notification_email {
 [email protected]
}
notification_email_from [email protected]
 smtp_connect_timeout 3
 smtp_server 127.0.0.1
 router_id HA_DEVEL_1
}

vrrp_script chk_haproxy {
 #监测haproxy
 script "killall -0 haproxy"
 #2s检查一次
 interval 2
 weight 2
}
vrrp_instance VI_1 {
 interface eth0
 #从为BACKUP
 state MASTER
 #从为100
 priority 101
 #路由ID，可通过#tcpdump vrrp查看。
 virtual_router_id 50
 #主从切换时间，单位为秒。
 garp_master_delay 1
 authentication {
  auth_type PASS
  #主从要一样，记得改一下哦
  auth_pass XXXXXXXXXX
 }
 virtual_ipaddress {
  192.168.1.100 #VIP
 }
 #将Linux中你想监控的网络接口卡监控起来，当其中的一块出现故障是keepalived都将视为路由器出现故障
 track_interface {
  eth0
  eth1
 }
 track_script {
  chk_haproxy
 }
 #状态通知
 # notify_master "/etc/keepalived/Mailnotify.py master"
 # notify_backup "/etc/keepalived/Mailnotify.py backup"
 # notify_fault "/etc/keepalived/Mailnotify.py fault"
}
#keepalived配置结束

#
#
#启动相关服务
/etc/init .d /haproxy start
/etc/init .d /keepalived start
#查看有没有节点记录
tcpdump vrrp

7.haproxy界面 (现在的haproxy可以在页面上手动启用或禁用节点)

访问http://192.168.1.67:8000/stats

注：关于keepalive里的状态通知，这里借用一下天斯 的python脚本

Mailnotify.py

#!/usr/local/bin/python
#coding: utf-8
from email.MIMEMultipart import MIMEMultipart
from email.MIMEText import MIMEText
from email.MIMEImage import MIMEImage
from email.header import Header
import sys
import smtplib

#---------------------------------------------------------------
# Name:        Mailnotify.py
# Purpose:     Mail notify to SA
# Author:      Liutiansi
# Email:       [email protected]
# Created:     2011/03/09
# Copyright:   (c) 2011
#--------------------------------------------------------------
strFrom = '[email protected]'
strTo = '[email protected]'
smtp_server = 'smtp.domain.com'
smtp_pass = '123456'

if sys.argv[ 1 ]! = "master" and sys.argv[ 1 ]! = "backup"   and sys.argv[ 1 ]! = "fault" :
    sys.exit()
else :
    notify_type = sys.argv[ 1 ]

mail_title = '[紧急]负载均衡器邮件通知'
mail_body_plain = notify_type + '被激活，请做好应急处理。'
mail_body_html = '' + notify_type + '被激活，请做好应急处理。'

msgRoot = MIMEMultipart( 'related' )
msgRoot[ 'Subject' ] = Header(mail_title, 'utf-8' )
msgRoot[ 'From' ] = strFrom
msgRoot[ 'To' ] = strTo

msgAlternative = MIMEMultipart( 'alternative' )
msgRoot.attach(msgAlternative)

msgText = MIMEText(mail_body_plain, 'plain' , 'utf-8' )
msgAlternative.attach(msgText)

msgText = MIMEText(mail_body_html, 'html' , 'utf-8' )
msgAlternative.attach(msgText)

smtp = smtplib.SMTP()
smtp.connect(smtp_server)
smtp.login(smtp_user,smtp_pass)
smtp.sendmail(strFrom, strTo, msgRoot.as_string())
smtp.quit()

然后放在/etc/keepalived 目录下（记得修改脚本里的邮箱地址），chmod +x /etc/keepalived/Mailnotify.py

把keepalived.conf的 “#状态通知” 以下的注释去掉，重启keepalived服务就可以了，嘿嘿