阿里云ECS安装FTP服务

阿里云ECS安装FTP服务

[root@rabbit1 data]# yum -y install vsftpd
Loaded plugins: fastestmirror
base                                                                                           | 3.6 kB  00:00:00     
epel                                                                                           | 3.2 kB  00:00:00     
http://repos.fedorapeople.org/repos/peter/erlang/epel-7/x86_64/repodata/repomd.xml: [Errno 14] HTTPS Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below knowledge base article 

https://access.redhat.com/articles/1320623

If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/

extras                                                                                         | 3.4 kB  00:00:00     
mysql-connectors-community                                                                     | 2.5 kB  00:00:00     
mysql-tools-community                                                                          | 2.5 kB  00:00:00     
mysql56-community                                                                              | 2.5 kB  00:00:00     
updates                                                                                        | 3.4 kB  00:00:00     
(1/10): epel/x86_64/updateinfo                                                                 | 945 kB  00:00:00     
(2/10): extras/7/x86_64/primary_db                                                             | 187 kB  00:00:00     
(3/10): base/7/x86_64/primary_db                                                               | 5.9 MB  00:00:00     
(4/10): epel/x86_64/group_gz                                                                   |  88 kB  00:00:00     
(5/10): base/7/x86_64/group_gz                                                                 | 166 kB  00:00:00     
(6/10): updates/7/x86_64/primary_db                                                            | 5.2 MB  00:00:00     
(7/10): epel/x86_64/primary                                                                    | 3.6 MB  00:00:00     
(8/10): mysql-connectors-community/x86_64/primary_db                                           |  26 kB  00:00:00     
(9/10): mysql-tools-community/x86_64/primary_db                                                |  45 kB  00:00:00     
(10/10): mysql56-community/x86_64/primary_db                                                   | 197 kB  00:00:01     
Determining fastest mirrors
 * base: mirrors.cloud.aliyuncs.com
 * epel: mirrors.cloud.aliyuncs.com
 * extras: mirrors.cloud.aliyuncs.com
 * updates: mirrors.cloud.aliyuncs.com
epel                                                                                                      12692/12692
Resolving Dependencies
--> Running transaction check
---> Package vsftpd.x86_64 0:3.0.2-22.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

======================================================================================================================
 Package                   Arch                      Version                            Repository               Size
======================================================================================================================
Installing:
 vsftpd                    x86_64                    3.0.2-22.el7                       base                    169 k

Transaction Summary
======================================================================================================================
Install  1 Package

Total download size: 169 k
Installed size: 348 k
Downloading packages:
vsftpd-3.0.2-22.el7.x86_64.rpm                                                                 | 169 kB  00:00:00     
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : vsftpd-3.0.2-22.el7.x86_64                                                                         1/1 
  Verifying  : vsftpd-3.0.2-22.el7.x86_64                                                                         1/1 

Installed:
  vsftpd.x86_64 0:3.0.2-22.el7                                                                                        

Complete!

[root@rabbit1 data]# service vsftpd start
Redirecting to /bin/systemctl start  vsftpd.service

[root@rabbit1 ~]# ps -ef|grep ftp
root     24074     1  0 08:37 ?        00:00:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
root     24150 24113  0 08:42 pts/0    00:00:00 grep --color=auto ftp
[root@rabbit1 ~]# 

[root@rabbit1 vsftpd]# cat vsftpd.conf 
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/xferlog
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
# Make sure, that one of the listen options is commented !!
listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
[root@rabbit1 vsftpd]#

/var/ftp/pub

anon_upload_enable=YES
anon_mkdir_write_enable=YES