libssh2的简单应用
libssh2的官网：www.libssh2.org；虽然这个网站里面内容是全英文的，我想所有的计算机从事者都能看懂这里面写的内容，这里面提供了很多例子，比如FTP的，shell命令的等等，我在这里介绍一下shell命令的发送和接收返回数据。
example里有个文件名叫exec.c 这个文件是实现shell命令的一个例子:
* Sample showing how to use libssh2 to execute a command remotely.
*
* The sample code has fixed values for host name, user name, password
* and command to run.
*
* Run it like this:
*
* $ ./ssh2_exec 127.0.0.1 user password "uptime"
*
*/
#include "libssh2_config.h"
#include
#ifdef HAVE_WINSOCK2_H
#include
#endif
#ifdef HAVE_SYS_SOCKET_H
#include
#endif
#ifdef HAVE_NETINET_IN_H
#include
#endif
#ifdef HAVE_SYS_SELECT_H
#include
#endif
#ifdef HAVE_UNISTD_H
#include
#endif
#ifdef HAVE_ARPA_INET_H
#include
#endif
#include
#include
#include
#include
#include
#include
#include
static int waitsocket(int socket_fd, LIBSSH2_SESSION *session)
{
struct timeval timeout;
int rc;
fd_set fd;
fd_set *writefd = NULL;
fd_set *readfd = NULL;
int dir;
timeout.tv_sec = 10;
timeout.tv_usec = 0;
FD_ZERO(&fd);
FD_SET(socket_fd, &fd);
/* now make sure we wait in the correct direction */
dir = libssh2_session_block_directions(session);
if(dir & LIBSSH2_SESSION_BLOCK_INBOUND)
readfd = &fd;
if(dir & LIBSSH2_SESSION_BLOCK_OUTBOUND)
writefd = &fd;
rc = select(socket_fd + 1, readfd, writefd, NULL, &timeout);
return rc;
}
int main(int argc, char *argv[])
{
const char *hostname = "127.0.0.1";
const char *commandline = "uptime";
const char *username = "user";
const char *password = "password";
unsigned long hostaddr;
int sock;
struct sockaddr_in sin;
const char *fingerprint;
LIBSSH2_SESSION *session;
LIBSSH2_CHANNEL *channel;
int rc;
int exitcode;
char *exitsignal=(char *)"none";
int bytecount = 0;
size_t len;
LIBSSH2_KNOWNHOSTS *nh;
int type;
#ifdef WIN32
WSADATA wsadata;
WSAStartup(MAKEWORD(2,0), &wsadata);
#endif
if (argc > 1)
/* must be ip address only */
hostname = argv[1];
if (argc > 2) {
username = argv[2];
}
if (argc > 3) {
password = argv[3];
}
if (argc > 4) {
commandline = argv[4];
}
rc = libssh2_init (0);
if (rc != 0) {
fprintf (stderr, "libssh2 initialization failed (%d)\n", rc);
return 1;
}
hostaddr = inet_addr(hostname);
/* Ultra basic "connect to port 22 on localhost"
* Your code is responsible for creating the socket establishing the
* connection
*/
sock = socket(AF_INET, SOCK_STREAM, 0);
sin.sin_family = AF_INET;
sin.sin_port = htons(22);
sin.sin_addr.s_addr = hostaddr;
if (connect(sock, (struct sockaddr*)(&sin),
sizeof(struct sockaddr_in)) != 0) {
fprintf(stderr, "failed to connect!\n");
return -1;
}
/* Create a session instance */
session = libssh2_session_init();
if (!session)
return -1;
/* tell libssh2 we want it all done non-blocking */
libssh2_session_set_blocking(session, 0);
/* ... start it up. This will trade welcome banners, exchange keys,
* and setup crypto, compression, and MAC layers
*/
while ((rc = libssh2_session_handshake(session, sock)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "Failure establishing SSH session: %d\n", rc);
return -1;
}
nh = libssh2_knownhost_init(session);
if(!nh) {
/* eeek, do cleanup here */
return 2;
}
/* read all hosts from here */
libssh2_knownhost_readfile(nh, "known_hosts",
LIBSSH2_KNOWNHOST_FILE_OPENSSH);
/* store all known hosts to here */
libssh2_knownhost_writefile(nh, "dumpfile",
LIBSSH2_KNOWNHOST_FILE_OPENSSH);
fingerprint = libssh2_session_hostkey(session, &len, &type);
if(fingerprint) {
struct libssh2_knownhost *host;
#if LIBSSH2_VERSION_NUM >= 0x010206
/* introduced in 1.2.6 */
int check = libssh2_knownhost_checkp(nh, hostname, 22,
fingerprint, len,
LIBSSH2_KNOWNHOST_TYPE_PLAIN|
LIBSSH2_KNOWNHOST_KEYENC_RAW,
&host);
#else
/* 1.2.5 or older */
int check = libssh2_knownhost_check(nh, hostname,
fingerprint, len,
LIBSSH2_KNOWNHOST_TYPE_PLAIN|
LIBSSH2_KNOWNHOST_KEYENC_RAW,
&host);
#endif
fprintf(stderr, "Host check: %d, key: %s\n", check,
(check <= LIBSSH2_KNOWNHOST_CHECK_MISMATCH)?
host->key:"");
/*****
* At this point, we could verify that 'check' tells us the key is
* fine or bail out.
*****/
}
else {
/* eeek, do cleanup here */
return 3;
}
libssh2_knownhost_free(nh);
if ( strlen(password) != 0 ) {
/* We could authenticate via password */
while ((rc = libssh2_userauth_password(session, username, password)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "Authentication by password failed.\n");
goto shutdown;
}
}
else {
/* Or by public key */
while ((rc = libssh2_userauth_publickey_fromfile(session, username,
"/home/user/"
".ssh/id_rsa.pub",
"/home/user/"
".ssh/id_rsa",
password)) ==
LIBSSH2_ERROR_EAGAIN);
if (rc) {
fprintf(stderr, "\tAuthentication by public key failed\n");
goto shutdown;
}
}
#if 0
libssh2_trace(session, ~0 );
#endif
/* Exec non-blocking on the remove host */
while( (channel = libssh2_channel_open_session(session)) == NULL &&
libssh2_session_last_error(session,NULL,NULL,0) ==
LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
if( channel == NULL )
{
fprintf(stderr,"Error\n");
exit( 1 );
}
while( (rc = libssh2_channel_exec(channel, commandline)) ==
LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
if( rc != 0 )
{
fprintf(stderr,"Error\n");
exit( 1 );
}
for( ;; )
{
/* loop until we block */
int rc;
do
{
char buffer[0x4000];
rc = libssh2_channel_read( channel, buffer, sizeof(buffer) );
if( rc > 0 )
{
int i;
bytecount += rc;
fprintf(stderr, "We read:\n");
for( i=0; i < rc; ++i )
fputc( buffer[i], stderr);
fprintf(stderr, "\n");
}
else {
if( rc != LIBSSH2_ERROR_EAGAIN )
/* no need to output this for the EAGAIN case */
fprintf(stderr, "libssh2_channel_read returned %d\n", rc);
}
}
while( rc > 0 );
/* this is due to blocking that would occur otherwise so we loop on
this condition */
if( rc == LIBSSH2_ERROR_EAGAIN )
{
waitsocket(sock, session);
}
else
break;
}
exitcode = 127;
while( (rc = libssh2_channel_close(channel)) == LIBSSH2_ERROR_EAGAIN )
waitsocket(sock, session);
if( rc == 0 )
{
exitcode = libssh2_channel_get_exit_status( channel );
libssh2_channel_get_exit_signal(channel, &exitsignal,
NULL, NULL, NULL, NULL, NULL);
}
if (exitsignal)
fprintf(stderr, "\nGot signal: %s\n", exitsignal);
else
fprintf(stderr, "\nEXIT: %d bytecount: %d\n", exitcode, bytecount);
libssh2_channel_free(channel);
channel = NULL;
shutdown:
libssh2_session_disconnect(session,
"Normal Shutdown, Thank you for playing");
libssh2_session_free(session);
#ifdef WIN32
closesocket(sock);
#else
close(sock);
#endif
fprintf(stderr, "all done\n");
libssh2_exit();
return 0;
} 做windows连接linux服务器发送shell命令的主要方法有几个简单介绍下：
1.WSAStartup()，打开socket链接库
2.socket()，初始化一个socket套接字
3.connect()，连接到ssh服务器
4.libssh2_session_init()，初始化一个ssh连接
5.libssh2_session_handshake()，将socket和session握手通信
6.libssh2_userauth_password()，验证登陆
7.libssh2_channel_open_session()，打开通道
8.libssh2_channel_exec()，发送shell命令
9.libssh2_channel_read()，读取命令处理结果
这里的8.libssh2_channel_exec()，发送shell命令和心目中想象的不太一样，不能循环发送命令，发送第一次命令时，该命令执行，但是第二次再发送时会返回一个
名字叫LIBSSH2_ERROR_CHANNEL_REQUEST_DENIED的ERROR，也就是说这个函数只能发送一次shell命令就不能再用了，太麻烦了。
在这里这种需求怎么解决：
当调用完libssh2_channel_exec()时，将通道释放掉libssh2_channel_close()，然后再重新打开libssh2_channel_open()，再使用这个libssh2_channel_exec()发送shell命令。
但是在这里可能会出现一个问题，在libssh2_channel_open()的时候并没有把通道打开，调用libssh2_session_last_error()发现这个错误代码是LIBSSH2_ERROR_EAGAIN，在官方网站的解释是这不是一个错误，是一个阻塞的过程，也就是现在这个链接已经阻塞了，需要等等再打开。这也就是最上面那个waitsocket()的作用了。