上一篇写了View的测量学个明白--View的测量
这一篇写View的layout过程。
这一篇主要是总结View的Layout过程。
我们在进行View的Layout的时候，直接调用View的layout方法。
layout(int l, int t, int r, int b)
// left,top, right,bottom
但是里面发生了什么呢？
我在学习了查阅了资料后写下了这篇文章，主要内容主要摘录自《Android开发艺术探索》和源码，加入自己的见解和理解。本人才疏学浅，不恰当之处望批评指正。
Layout过程
Layout的作用是ViewGroup用来确定子元素的位置，当ViewGroup的位置被确定后，它在onLayout中会遍历所有的子元素并调用其layout的方法,在layout方法中onLayout方法又会被调用。Layout过程和measure过程相比就简单多了，layout方法确定View本身的位置，而onLayout方法则会确定所有子元素的位置。
View的layout()方法
//android-25 layout方法
/**
* Assign a size and position to a view and all of its
* descendants
*
* This is the second phase of the layout mechanism.
* (The first is measuring). In this phase, each parent calls
* layout on all of its children to position them.
* This is typically done using the child measurements
* that were stored in the measure pass().
*
* Derived classes should not override this method.
* Derived classes with children should override
* onLayout. In that method, they should
* call layout on each of their children.
*
* @param l Left position, relative to parent
* @param t Top position, relative to parent
* @param r Right position, relative to parent
* @param b Bottom position, relative to parent
*/
@SuppressWarnings({"unchecked"})
public void layout(int l, int t, int r, int b) {
if ((mPrivateFlags3 & PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT) != 0) {
onMeasure(mOldWidthMeasureSpec, mOldHeightMeasureSpec);
mPrivateFlags3 &= ~PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
}
int oldL = mLeft;
int oldT = mTop;
int oldB = mBottom;
int oldR = mRight;
boolean changed = isLayoutModeOptical(mParent) ?
setOpticalFrame(l, t, r, b) : setFrame(l, t, r, b);
if (changed || (mPrivateFlags & PFLAG_LAYOUT_REQUIRED) == PFLAG_LAYOUT_REQUIRED) {
onLayout(changed, l, t, r, b);
if (shouldDrawRoundScrollbar()) {
if(mRoundScrollbarRenderer == null) {
mRoundScrollbarRenderer = new RoundScrollbarRenderer(this);
}
} else {
mRoundScrollbarRenderer = null;
}
mPrivateFlags &= ~PFLAG_LAYOUT_REQUIRED;
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnLayoutChangeListeners != null) {
ArrayList listenersCopy =
(ArrayList)li.mOnLayoutChangeListeners.clone();
int numListeners = listenersCopy.size();
for (int i = 0; i < numListeners; ++i) {
listenersCopy.get(i).onLayoutChange(this, l, t, r, b, oldL, oldT, oldR, oldB);
}
}
}
mPrivateFlags &= ~PFLAG_FORCE_LAYOUT;
mPrivateFlags3 |= PFLAG3_IS_LAID_OUT;
}
大致流程如下：首先会通过setFrame方法来设定View的四个顶点的位置，即初始化mLeft， mTopm，Rightm，Bottom这四个值，View的四个顶点一旦确定，那么View在父容器中的位置也就确定了;
接着会调用onLayout方法，这个方法的用途是父容器确定子元素的位置。
和onMeasure方法类似，onLayout的具体实现同样和具体的布局有关系，所以View和ViewGroup均没有真正实现。
/**
* Called from layout when this view should
* assign a size and position to each of its children.
*
* Derived classes with children should override
* this method and call layout on each of
* their children.
* @param changed This is a new size or position for this view
* @param left Left position, relative to parent
* @param top Top position, relative to parent
* @param right Right position, relative to parent
* @param bottom Bottom position, relative to parent
*/
protected void onLayout(boolean changed, int left, int top, int right, int bottom) {
}
我们来看看LinearLayout 的onLayout方法吧。
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
if (mOrientation == VERTICAL) {
layoutVertical(l, t, r, b);
} else {
layoutHorizontal(l, t, r, b);
}
}
下面贴出layoutVertical(), layoutHorizontal()代码：(似乎纯属占篇幅)
/**
* Position the children during a layout pass if the orientation of this
* LinearLayout is set to {@link #VERTICAL}.
*
* @see #getOrientation()
* @see #setOrientation(int)
* @see #onLayout(boolean, int, int, int, int)
* @param left
* @param top
* @param right
* @param bottom
*/
void layoutVertical(int left, int top, int right, int bottom) {
final int paddingLeft = mPaddingLeft;
int childTop;
int childLeft;
// Where right end of child should go
final int width = right - left;
int childRight = width - mPaddingRight;
// Space available for child
int childSpace = width - paddingLeft - mPaddingRight;
final int count = getVirtualChildCount();
final int majorGravity = mGravity & Gravity.VERTICAL_GRAVITY_MASK;
final int minorGravity = mGravity & Gravity.RELATIVE_HORIZONTAL_GRAVITY_MASK;
switch (majorGravity) {
case Gravity.BOTTOM:
// mTotalLength contains the padding already
childTop = mPaddingTop + bottom - top - mTotalLength;
break;
// mTotalLength contains the padding already
case Gravity.CENTER_VERTICAL:
childTop = mPaddingTop + (bottom - top - mTotalLength) / 2;
break;
case Gravity.TOP:
default:
childTop = mPaddingTop;
break;
}
for (int i = 0; i < count; i++) {
final View child = getVirtualChildAt(i);
if (child == null) {
childTop += measureNullChild(i);
} else if (child.getVisibility() != GONE) {
final int childWidth = child.getMeasuredWidth();
final int childHeight = child.getMeasuredHeight();
final LinearLayout.LayoutParams lp =
(LinearLayout.LayoutParams) child.getLayoutParams();
int gravity = lp.gravity;
if (gravity < 0) {
gravity = minorGravity;
}
final int layoutDirection = getLayoutDirection();
final int absoluteGravity = Gravity.getAbsoluteGravity(gravity, layoutDirection);
switch (absoluteGravity & Gravity.HORIZONTAL_GRAVITY_MASK) {
case Gravity.CENTER_HORIZONTAL:
childLeft = paddingLeft + ((childSpace - childWidth) / 2)
+ lp.leftMargin - lp.rightMargin;
break;
case Gravity.RIGHT:
childLeft = childRight - childWidth - lp.rightMargin;
break;
case Gravity.LEFT:
default:
childLeft = paddingLeft + lp.leftMargin;
break;
}
if (hasDividerBeforeChildAt(i)) {
childTop += mDividerHeight;
}
childTop += lp.topMargin;
setChildFrame(child, childLeft, childTop + getLocationOffset(child),
childWidth, childHeight);
childTop += childHeight + lp.bottomMargin + getNextLocationOffset(child);
i += getChildrenSkipCount(child, i);
}
}
}
/**
* Position the children during a layout pass if the orientation of this
* LinearLayout is set to {@link #HORIZONTAL}.
*
* @see #getOrientation()
* @see #setOrientation(int)
* @see #onLayout(boolean, int, int, int, int)
* @param left
* @param top
* @param right
* @param bottom
*/
void layoutHorizontal(int left, int top, int right, int bottom) {
final boolean isLayoutRtl = isLayoutRtl();
final int paddingTop = mPaddingTop;
int childTop;
int childLeft;
// Where bottom of child should go
final int height = bottom - top;
int childBottom = height - mPaddingBottom;
// Space available for child
int childSpace = height - paddingTop - mPaddingBottom;
final int count = getVirtualChildCount();
final int majorGravity = mGravity & Gravity.RELATIVE_HORIZONTAL_GRAVITY_MASK;
final int minorGravity = mGravity & Gravity.VERTICAL_GRAVITY_MASK;
final boolean baselineAligned = mBaselineAligned;
final int[] maxAscent = mMaxAscent;
final int[] maxDescent = mMaxDescent;
final int layoutDirection = getLayoutDirection();
switch (Gravity.getAbsoluteGravity(majorGravity, layoutDirection)) {
case Gravity.RIGHT:
// mTotalLength contains the padding already
childLeft = mPaddingLeft + right - left - mTotalLength;
break;
case Gravity.CENTER_HORIZONTAL:
// mTotalLength contains the padding already
childLeft = mPaddingLeft + (right - left - mTotalLength) / 2;
break;
case Gravity.LEFT:
default:
childLeft = mPaddingLeft;
break;
}
int start = 0;
int dir = 1;
//In case of RTL, start drawing from the last child.
if (isLayoutRtl) {
start = count - 1;
dir = -1;
}
for (int i = 0; i < count; i++) {
final int childIndex = start + dir * i;
final View child = getVirtualChildAt(childIndex);
if (child == null) {
childLeft += measureNullChild(childIndex);
} else if (child.getVisibility() != GONE) {
final int childWidth = child.getMeasuredWidth();
final int childHeight = child.getMeasuredHeight();
int childBaseline = -1;
final LinearLayout.LayoutParams lp =
(LinearLayout.LayoutParams) child.getLayoutParams();
if (baselineAligned && lp.height != LayoutParams.MATCH_PARENT) {
childBaseline = child.getBaseline();
}
int gravity = lp.gravity;
if (gravity < 0) {
gravity = minorGravity;
}
switch (gravity & Gravity.VERTICAL_GRAVITY_MASK) {
case Gravity.TOP:
childTop = paddingTop + lp.topMargin;
if (childBaseline != -1) {
childTop += maxAscent[INDEX_TOP] - childBaseline;
}
break;
case Gravity.CENTER_VERTICAL:
// Removed support for baseline alignment when layout_gravity or
// gravity == center_vertical. See bug #1038483.
// Keep the code around if we need to re-enable this feature
// if (childBaseline != -1) {
// // Align baselines vertically only if the child is smaller than us
// if (childSpace - childHeight > 0) {
// childTop = paddingTop + (childSpace / 2) - childBaseline;
// } else {
// childTop = paddingTop + (childSpace - childHeight) / 2;
// }
// } else {
childTop = paddingTop + ((childSpace - childHeight) / 2)
+ lp.topMargin - lp.bottomMargin;
break;
case Gravity.BOTTOM:
childTop = childBottom - childHeight - lp.bottomMargin;
if (childBaseline != -1) {
int descent = child.getMeasuredHeight() - childBaseline;
childTop -= (maxDescent[INDEX_BOTTOM] - descent);
}
break;
default:
childTop = paddingTop;
break;
}
if (hasDividerBeforeChildAt(childIndex)) {
childLeft += mDividerWidth;
}
childLeft += lp.leftMargin;
setChildFrame(child, childLeft + getLocationOffset(child), childTop,
childWidth, childHeight);
childLeft += childWidth + lp.rightMargin +
getNextLocationOffset(child);
i += getChildrenSkipCount(child, childIndex);
}
}
}
(是不是看到这些代码瑟瑟发抖。只要你坚信代码是写出的就行了。(什么? AI 写代码。草，你找茬是不是？))
高潮来了：
简化一下layoutVertical代码，注意看// Tudou add annotation的地方
void layoutVertical(int left, int top, int right, int bottom) {
final int paddingLeft = mPaddingLeft;
int childTop;
int childLeft;
// Where right end of child should go
final int width = right - left;
int childRight = width - mPaddingRight;
// Space available for child
int childSpace = width - paddingLeft - mPaddingRight;
// Tudou add annotation
// get count
final int count = getVirtualChildCount();
final int majorGravity = mGravity & Gravity.VERTICAL_GRAVITY_MASK;
final int minorGravity = mGravity & Gravity.RELATIVE_HORIZONTAL_GRAVITY_MASK;
switch (majorGravity) {
case Gravity.BOTTOM:
// mTotalLength contains the padding already
childTop = mPaddingTop + bottom - top - mTotalLength;
break;
// mTotalLength contains the padding already
case Gravity.CENTER_VERTICAL:
childTop = mPaddingTop + (bottom - top - mTotalLength) / 2;
break;
case Gravity.TOP:
default:
childTop = mPaddingTop;
break;
}
// Tudou add annotation
// 遍历
for (int i = 0; i < count; i++) {
final View child = getVirtualChildAt(i);
if (child == null) {
childTop += measureNullChild(i);
} else if (child.getVisibility() != GONE) {
// Tudou add annotation
// get width,height
final int childWidth = child.getMeasuredWidth();
final int childHeight = child.getMeasuredHeight();
final LinearLayout.LayoutParams lp =
(LinearLayout.LayoutParams) child.getLayoutParams();
....
if (hasDividerBeforeChildAt(i)) {
childTop += mDividerHeight;
}
childTop += lp.topMargin;
//Tudou add annotation
// 在setChildFrame的childWidth, childHeight，我们可以看出来，就是子元素测量宽/高.
setChildFrame(child, childLeft, childTop + getLocationOffset(child),
childWidth, childHeight);
childTop += childHeight + lp.bottomMargin + getNextLocationOffset(child);
i += getChildrenSkipCount(child, i);
}
}
}
简单分析一下layoutVertical的代码逻辑，此方法会遍历所有子元素并调用setChildFrame方法来为子元素指定对应的位置。
其中childTop变量会逐渐增大，这就意味着后面的子元素会被放置在靠下的位置，正好符合LinearLayout 方向是竖直方向的特点。
setChildFrame仅仅是调用子元素的layout方法而已， 这样父元素在layout中完成自己的定位后，就通过onLayout方法去调用子元素的layout方法，子元素又会通过自己的layout方法来确定自己的位置，这样一层一层地传递下去就完成了整个View树的layout过程。
看一下setChildFrame
//这里的width，height就是就是子元素测量宽/高.
private void setChildFrame(View child, int left, int top, int width, int height) {
child.layout(left, top, left + width, top + height);
}
而在layout方法中会通过setFrame去设置子元素的四个顶点的位置，在setFrame中有如下赋值语句，这样一来子元素的位置就确定了。
mLeft = left;
mTop = top;
mRight = right;
mBottom = bottom;
参考资料：
developer.android.com
Android开发艺术探索