2019 SDN上机第6次作业

1.实验拓扑

Python脚本:

from mininet.topo import Topo
class Mytopo(Topo):

    def __init__(self):

        # initilaize topology
        Topo.__init__(self)

        # add hosts and switches
        s1 = self.addSwitch('s1')
        s2 = self.addSwitch('s2')
        h1 = self.addHost('h1')
        h2 = self.addHost('h2')
        h3 = self.addHost('h3')
        h4 = self.addHost('h4')
        h5 = self.addHost('h5')
        h6 = self.addHost('h6')
        
        # add links
        self.addLink(s1, h1, 1, 0)
        self.addLink(s1, h2, 2, 0)
        self.addLink(s1, h3, 3, 0)
        self.addLink(s1, s2, 4, 4)
        self.addLink(s2, h4, 1, 0)
        self.addLink(s2, h5, 2, 0)
        self.addLink(s2, h6, 3, 0)
        
topos = {'mytopo': (lambda:Mytopo())}

查看拓扑端口连接情况：

连接ryu控制器:

2.使用Ryu的REST API下发流表实现和第2次实验同样的VLAN

#端口号1发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":1
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4096            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号2发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":2
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4097            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号3发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":3
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4098            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add



#向端口1转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "0"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 1
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口2转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "1"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 2
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口3转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "dl_vlan": "2"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 3
        }
    ]
}' http://localhost:8080/stats/flowentry/add

查看流表：

连通性测试:

3.对比两种方法，写出你的实验体会

使用Ryu的REST API下发流表可视化比较好，只需要在body里面按照python字典的格式书写流表，然后下发即可