一 mysql主从搭建
略
一 设置hosts解析
[root@localhost conf]# vi /etc/hosts （三台服务器相同都添加下面三项）
192.168.31.2 M1
192.168.31.3 M2
192.168.31.4 slave1
二 设置各台服务器的名字分别与hosts文件中的对应
略
三 创建相应的帐号
GRANT REPLICATION SLAVE , REPLICATION CLIENT ON * . * TO 'mmm_slave'@'192.168.31.%' IDENTIFIED BY '123456'; （用于主从和主主复制 M1，M2 上都添加这个用户）
flush privileges;
四 M1 M2 配置成主主模式
M1 配置文件
[mysqld]
innodb_file_per_table=1
log-bin=/data/mysql/mysql-bin.log
binlog_format = ROW
server-id=1
binlog-do-db=mmm_test
replicate-do-db=mmm_test
M2配置文件
[mysqld]
innodb_file_per_table=1
log-bin=/data/mysql/mysql-bin.log
binlog_format = ROW
server-id=2
binlog-do-db=mmm_test
replicate-do-db=mmm_test
在M2上执行
change master to master_host='192.168.31.2',master_user='mmm_slave',master_password='123456',master_log_file='mysql-bin.000017',master_log_pos=326;
start slave;
在M1 上执行 (主主模型)
change master to master_host='192.168.31.3',master_user='mmm_slave',master_password='123456',master_log_file='mysql-bin.000001',master_log_pos=312;
start slave;
五 配置M1和slave1 主从
slave1 配置文件
[mysqld]
server-id =3
innodb_file_per_table=1
log-bin=/data/mysql/mysql-bin.log
binlog_format = ROW
replicate-do-db=mmm_test
执行
change master to master_host='192.168.31.2',master_user='mmm_slave',master_password='123456',master_log_file='mysql-bin.000017',master_log_pos=326;
start slave;
六 安装MySQL-MMM (三台服务器执行结果相同)
[root@M1 software]# wget http://download.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
[root@M1 software]# rpm -ivh epel-release-5-4.noarch.rpm
[root@M1 software]# yum -y install mysql-mmm*
[root@M1 software]# rpm -qa | grep mysql-mmm
mysql-mmm-2.2.1-2.el6.noarch
mysql-mmm-agent-2.2.1-2.el6.noarch
mysql-mmm-tools-2.2.1-2.el6.noarch
mysql-mmm-monitor-2.2.1-2.el6.noarch
七 在三个节点上授权
GRANT PROCESS,SUPER,REPLICATION CLIENT ON * . * TO 'mmm_agent'@'192.168.31.%' IDENTIFIED BY '123456'; (代理帐号，是MMM代理用来变成只读模式和同步master等的)
GRANT REPLICATION CLIENT ON * . * TO 'mmm_monitor'@'192.168.31.%' IDENTIFIED BY '123456'; (监听帐号，是MMM监控服务器用来对MySQL服务器做健康检查的)
flush privileges;
八 配置 MMM 监控、代理服务
1 三台服务器上修改mmm_common.conf (三台服务器上执行步骤相同)
[root@M1 conf]# cd /etc/mysql-mmm/
[root@M1 mysql-mmm]# cp mmm_common.conf mmm_common.conf.bak
[root@M1 mysql-mmm]# vi mmm_common.conf
active_master_role writer
cluster_interface eth1 # 这里视情况而定 我的三台服务器这里不相同
pid_path /var/run/mysql-mmm/mmm_agentd.pid
bin_path /usr/libexec/mysql-mmm/
replication_user mmm_slave # 前面创建的复制帐号
replication_password 123456 # 复制帐号的密码
agent_user mmm_agent # 前面创建的代理帐号
agent_password 123456 # 代理帐号的密码
ip 192.168.31.2
mode master
peer M1
ip 192.168.31.3
mode master
peer M2
ip 192.168.31.4
mode slave
hosts M1, M2 # 能够作为writer的服务器
ips 192.168.31.10 # writer节点的虚拟ip, 应用的写请求将直接连接到这个ip
mode exclusive # 排他模式
hosts M1,M2,slave1 # 作为reader的服务器
ips 192.168.31.20 # reader节点虚拟ip,应用的读请求将直接连接到这个ip
mode balanced # 平衡模式
2 修改M1的mmm_agent.conf
[root@M1 mysql-mmm]# vi mmm_agent.conf
include mmm_common.conf
# The 'this' variable refers to this server. Proper operation requires
# that 'this' server (db1 by default), as well as all other servers, have the
# proper IP addresses set in mmm_common.conf.
this M1
3 修改M2的mmm_agent.conf
[root@M2 mysql-mmm]# vi mmm_agent.conf
include mmm_common.conf
# The 'this' variable refers to this server. Proper operation requires
# that 'this' server (db1 by default), as well as all other servers, have the
# proper IP addresses set in mmm_common.conf.
this M2
4 修改slave1的mmm_agent.conf
[root@slave1 mysql-mmm]# vi mmm_agent.conf
include mmm_common.conf
# The 'this' variable refers to this server. Proper operation requires
# that 'this' server (db1 by default), as well as all other servers, have the
# proper IP addresses set in mmm_common.conf.
this slave1
5 修改 mon 上的mmm_mon.conf (这里就是M1 共用一台服务器)
[root@M1 mysql-mmm]# vi mmm_mon.conf
include mmm_common.conf
ip ip 192.168.31.2
pid_path /var/run/mysql-mmm/mmm_mond.pid
bin_path /usr/libexec/mysql-mmm
status_path /var/lib/mysql-mmm/mmm_mond.status
ping_ips 192.168.31.2,192.168.31.3,192.168.31.4
auto_set_online 10
# The kill_host_bin does not exist by default, though the monitor will
# throw a warning about it missing. See the section 5.10 "Kill Host
# Functionality" in the PDF documentation.
#
# kill_host_bin /usr/libexec/mysql-mmm/monitor/kill_host
#
monitor_user mmm_monitor
monitor_password 123456
debug 0
九 启动各个相关服务
1 三台服务器都启动mysql-mmm-agent服务
[root@M1 mysql-mmm]# /etc/init.d/mysql-mmm-agent start
[root@M2 mysql-mmm]# /etc/init.d/mysql-mmm-agent start
[root@slave1 mysql-mmm]# /etc/init.d/mysql-mmm-agent start
2 在M1 上启动mysql-mon服务
[root@M1 mysql-mmm]# /etc/init.d/mysql-mmm-monitor start
3 查看mysql-mon 监控机上的MMM状态信息
[root@M1 mysql-mmm]# mmm_control show
出现Can't connect to monitor daemon
则yum -y install perl-Time-HiRes*
如果还是出现 Can't connect to monitor daemon 则要检查主从是否有问题
[root@M1 ~]# mmm_control show # 再次执行 会出现下面这几行
M1(192.168.31.2) master/ONLINE. Roles: writer(192.168.31.10)
M2(192.168.31.3) master/ONLINE. Roles: reader(192.168.31.20)
slave1(192.168.31.4) slave/ONLINE. Roles:
[root@M1 ~]# mmm_control checks all # 出现下面这些
M1 ping [last change: 2015/09/24 00:39:19] OK
M1 mysql [last change: 2015/09/24 00:39:19] OK
M1 rep_threads [last change: 2015/09/24 00:39:19] ERROR: Replication is broken
......
M2 rep_backlog [last change: 2015/09/24 00:39:19] OK: Backlog is null
十 查看集群日志
[root@M1 ~]# tail -f /var/log/mysql-mmm/mmm_agentd.log
2015/09/23 18:38:11 FATAL Child exited with exitcode 98, restarting after 10 second sleep
2015/09/23 18:38:21 FATAL Listener: Can't create socket!
.......
2015/09/24 00:39:13 INFO Added: writer(192.168.31.10)
[root@M1 ~]# tail -f /var/log/mysql-mmm/mmm_mond.log
2015/09/24 00:35:10 WARN Checker 'mysql' is dead!
......
2015/09/24 00:35:16 INFO Child exited normally (with exitcode 0), shutting down
[root@slave1 mysql-mmm]# tail -f /var/log/mysql-mmm/mmm_agentd.log
2015/09/23 02:53:38 INFO END
.......
2015/09/24 00:38:55 INFO Child exited normally (with exitcode 0), shutting down
2015/09/24 00:38:55 INFO Changing active master to 'M1'
十一 测试
我们使用在M1 ip a 可以发现 192.168.31.10 在M1上
模拟M1宕机
使用 service mysql stop
在查看 ip a 发现vip 在M2上了。
