How To Install GNS3 on Centos/Redhat/Fedora

You won't find detailed instructions for GNS3 installation on Centos/Redhat/Fedora over the net, So I decided to make one. Installing GNS3 on Centos/Redhat/Fedora can be very tedious task. But If you follow my Steps given below you can setup and run GNS3 without any difficulty. Since Qt 4.5.1 binary which is required for GNS3 is not available for these OS's, we'll have to compile it from the source.

IMP

:: Installation of all this packages will take a lot of time. So do it when you are free.

OK lets roll

First we'll have to install dependencies

[user@admin ~]$ su

Password: (Type in your root password here)

[root@admin /]# yum install python python-devel xorg-x11-proto-devel libXext-devel

[root@admin /]# yum install gcc-c++

Now we'll download and install Qt4

[root@admin /]#cd /tmp

[root@admin tmp#wget http://ftp.uludag.org.tr/pub/source/2009/qt-x11-opensource-src-4.5.1.tar.gz

[root@admin tmp]#tar xzf qt-x11-opensource-src-4.5.1.tar.gz

[root@admin tmp]# cd qt-x11-opensource-src-4.5.1

[root@admin qt-x11-opensource-src-4.5.1]#./configure -nomake examples -nomake demos -qt-gif -no-exceptions -debug -qt3support

[root@admin qt-x11-opensource-src-4.5.1]#gmake

<====This might take 2-3 hrs.

[root@admin qt-x11-opensource-src-4.5.1]#gmake install

<====Another 30 mins or so

[root@admin qt-x11-opensource-src-4.5.1]#PATH=/usr/local/Trolltech/Qt-4.5.1/bin:$PATH

[root@admin qt-x11-opensource-src-4.5.1]#export PATH

Next we'll install SIP

[root@admin qt-x11-opensource-src-4.5.1]#cd ..

[root@admin tmp]#wget http://ftp.uludag.org.tr/pub/source/2009/sip-4.8.1.tar.gz

[root@admin tmp]#tar xzf sip-4.8.1.tar.gz

[root@admin tmp]#cd sip-4.8.1

[root@admin sip-4.8.1]#python configure.py

[root@admin sip-4.8.1]#make

[root@admin sip-4.8.1]#make install

Next we'll Install PyQt4

[root@admin sip-4.8.1]#cd ..

[root@admin tmp]#wget http://ftp.uludag.org.tr/pub/source/2009/PyQt-x11-gpl-4.5.2.tar.gz

[root@admin tmp]#tar xzf PyQt-x11-gpl-4.5.2.tar.gz

[root@admin tmp]#cd PyQt-x11-gpl-4.5.2

[root@admin PyQt-x11-gpl-4.5.2]#python configure.py

[root@admin PyQt-x11-gpl-4.5.2]#make

<=====This will take 30-60 mins

[root@admin PyQt-x11-gpl-4.5.2]#make install

We are done with compiling part, now lets download GNS3 source files

[root@admin tmp]#cd /opt

[root@admin opt]#wget http://space.dl.sourceforge.net/project/gns-3/GNS3/0.7.2/GNS3-0.7.2-src.tar.bz2

[root@admin opt]#tar -xjvf GNS3-0.7.2-src.tar.bz2 && rm GNS3-0.7.2-src.tar.bz2

[root@admin opt]#mv GNS3-0.7.2-src /opt/GNS3

Create the following directories:

These directories will be used by GNS3 – such as projects – where your working projects will be stored, cache, temp, IOS p_w_picpaths, etc.

[root@admin opt]#cd /opt/GNS3

[root@admin GNS3]#mkdir Dynamips

[root@admin GNS3]#mkdir IOS

[root@admin GNS3]#mkdir Project

[root@admin GNS3]#mkdir Cache

[root@admin GNS3]#mkdir tmp

[root@admin GNS3]#chmod o+rw -R ./Project

[root@admin GNS3]#chmod o+rw -R ./tmp

[root@admin GNS3]#chmod o+rw -R ./IOS

Download binary of dynamips and make it executable

[root@admin GNS3]#cd Dynamips

[root@admin Dynamips ]#wget http://www.ipflow.utc.fr/dynamips/dynamips-0.2.8-RC2-x86.bin

[root@admin Dynamips ]#chmod +x ./dynamips-0.2.8-RC2-x86.bin

IMP:: For 64-bit users

[root@admin Dynamips ]#wget http://www.ipflow.utc.fr/dynamips/dynamips-0.2.8-RC2-amd64.bin

[root@admin Dynamips ]#chmod +x ./dynamips-0.2.8-RC2-amd64.bin

You can create a desktop shortcut by right-clicking on the desktop and select “Create Launcher..”, Name it GNS3 and in the command section type in

python "/opt/GNS3/gns3"

Double click to open GNS3 and we will edit the default settings. If you don’t want to use desktop icons you can create a launcher from your programs menu by right clicking on the Main Menu, selecting Edit Menu. Select New Item on the right and you will be presented with the same window where you type in the above. From there you can move the launcher into any menu section of your choice.

Fire up GNS3

* Go to edit | preferences and in the ‘Terminal command:’ section type in:

gnome-terminal -t %d -e 'telnet %h %p' > /dev/null 2>&1 &

* Under ‘Paths’ change the ‘Project directory:’ to

/opt/GNS3/Project

and the ‘IOS/PIX directory:’ to

/opt/GNS3/IOS

* Click on Dynamips tab on the left

For the ‘Executable path:’ type in

/opt/GNS3/Dynamips/dynamips-0.2.8-RC2-x86.bin

64-bit users

type /opt/GNS3/Dynamips/dynamips-0.2.8-RC2-amd64.bin

* Change the ‘Working directory:’ to

/opt/GNS3/tmp

Click on the Capture tab on the left

* For the ‘Working directory for capture files:’ change it to

/opt/GNS3/Project

After you have done all that, you will be able to Open and Save your GNS3 projects properly and have an efficient setup for GNS3. In order to use the devices in GNS3 you must obtain our own IOS p_w_picpaths from Cisco.

Hope this tutorial will help you guys to setup and run GNS3 on your Linux system.

Happy Learning :)