一开始粗心大意没有注意到“LVS操作手册”。fullnat模式下在配置keepalived的时候，与dr、nat、tun是有很大的区别的。
这里根据自身实战的经验和lvs操作手册中的步骤，重新用自己的语言整理下：
注意不要安装libnl libnl-devel，否则有报错，如果没遇到报错也无所谓
在完成fullnat内核编译之后，我们就可以配置keepalived了：
一、安装keepalived、ipvsadm
必须要用tools压缩包中的来安装，不要用其他开源版本
1.1 keepalived
cd tools/keepalived; ./configure --with-kernel-dir="/lib/modules/`uname -r`/build"; make; make install;
cp -a bin/genhash /usr/local/bin/ cp -a bin/keepalived /sbin/ cp -a keepalived/etc/init.d/keepalived.init /etc/init.d/keepalived cp -a keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf cp -a keepalived/etc/init.d/keepalived.sysconfig /etc/sysconfig/keepalived
1.2 ipvsadm
cd tools/ipvsadm; make; make install;
二、系统自身参数配置
1、
打开irqbalance # service irqbalance start # chkconfig --level 2345 irqbalance on
2、
路径：/etc/sysctl.conf # configure for lvs net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 net.core.netdev_max_backlog = 500000
三、keepalived配置文件
3.1 使用主备模式部署
global部分
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
local address部分
#这部分官方推荐用多个ip地址，本次试验就用服务器自身地址，如果需要用到多个地址，需要在rc.local中添加绑ip的命令。
local_address_group laddr_g1 {
192.168.122.101 #这里可以用本机的ip
}
virtual server group部分
#看到这里需要将vip和vport都声明，这就是一个区别。
virtual_server_group shanks1 {
192.168.122.123 80
}
vrrp_sunc_group部分
vrrp_sync_group lvs_1 {
group {
VI_1
}
notify_master /home/work/public/opbin/script/change_hostname_to_master.sh
notify_backup /home/work/public/opbin/script/change_hostname_to_backup.sh
smtp_alert
}
vrrp instance 部分
vrrp_instance VI_1 {
state BACKUP #主备都是backup
interface eth0
virtual_router_id 156
priority 100 #备机上设置成10
advert_int 1
nopreempt FALSE #设置成切换不抢占
authentication {
auth_type PASS
auth_pass wocao
}
virtual_ipaddress {
192.168.122.123
}
}
virtual server部分
virtual_server 192.168.122.123 80 {
delay_loop 6
lb_algo rr
lb_kind FNAT
protocol TCP
syn_proxy
laddr_group_name laddr_g1 #local address group
real_server 172.16.122.123 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
最终的配置文件
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
local_address_group laddr_g1 {
192.168.122.101
}
virtual_server_group shanks1 {
192.168.122.123 80
}
vrrp_sync_group lvs_1 {
group {
VI_1
}
notify_master /home/work/public/opbin/script/change_hostname_to_master.sh
notify_backup /home/work/public/opbin/script/change_hostname_to_backup.sh
smtp_alert
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 156
priority 100 #备机上设置成10
advert_int 1
nopreempt FALSE
authentication {
auth_type PASS
auth_pass wocao
}
virtual_ipaddress {
192.168.122.123
}
}
virtual_server 192.168.122.123 80 {
delay_loop 6
lb_algo rr
lb_kind FNAT
protocol TCP
syn_proxy
laddr_group_name laddr_g1 #local address group
real_server 172.16.122.123 80 {
weight 100
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
3.2 使用集群模式部署
global部分
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
local address部分
#这部分官方推荐用多个ip地址，本次试验就用服务器自身地址，如果需要用到多个地址，需要在rc.local中添加绑ip的命令。
local_address_group laddr_g1 {
192.168.122.101 #这里可以用本机ip
}
virtual server group部分
#看到这里需要将vip和vport都声明，这就是一个区别。
virtual_server_group shanks1 {
192.168.122.123 80
}
virtual server部分
virtual_server 192.168.122.123 80 {
delay_loop 6
lb_algo rr
lb_kind FNAT
protocol TCP
syn_proxy
laddr_group_name laddr_g1 #local address group
alpha
omega #我一般是把这个注释掉，不让它去自动的del虚ip。
quorum 1
hysteresis 0
quorum_up " ip addr add 10.255.255.123/32 dev lo;" #add
#quorum_up " ip addr add 10.255.255.123/32 dev lo; ip addr add 10.255.255.124/32 dev lo;"
quorum_down "ip addr del 10.255.255.123/32 dev lo;" #del vip 我一般是把这个注释掉，不让它去自动的del虚ip。
real_server 172.16.122.123 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
最终的配置文件
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
local_address_group laddr_g1 {
192.168.122.101
}
virtual_server_group shanks1 {
192.168.122.123 80
}
virtual_server 192.168.122.123 80 {
delay_loop 6
lb_algo rr
lb_kind FNAT
protocol TCP
syn_proxy
laddr_group_name laddr_g1 #local address group
alpha
#omega
quorum 1
hysteresis 0
quorum_up " ip addr add 10.255.255.123/32 dev lo;" #add
#quorum_down "ip addr del 10.255.255.123/32 dev lo;" #del vip
real_server 172.16.122.123 80 {
weight 100
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
最后启动keepalived。关于zebra、ospf后续补充
遇到的报错：
1、#在安装完keepalived之后，安装ipvsadm的时候，遇到了如下的报错： [root@lvs ipvsadm]# make make: *** Norule to make target `../keepalived/keepalived/libipvs-2.6/libipvs.a', needed by`ipvsadm'. Stop. [root@lvsipvsadm]# ll ../keepalived/keepalived/libipvs-2.6/libipvs.a ls: cannotaccess ../keepalived/keepalived/libipvs-2.6/libipvs.a: No such file ordirectory 解决办法： 这是由于使用http://shanks.blog.51cto.com/3899909/1387489这种方式打包的内核rpm，安装时候没有装kernel-devel导致的，装下就好了。
2、在make ipvsadm的时候遇到了如下的报错： /usr/local/src/tools/keepalived/keepalived/libipvs-2.6/libipvs.c:496: undefined reference to `nlmsg_free' ../keepalived/keepalived/libipvs-2.6/libipvs.a(libipvs.o): In function `ipvs_update_dest': /usr/local/src/tools/keepalived/keepalived/libipvs-2.6/libipvs.c:467: undefined reference to `nlmsg_free' ../keepalived/keepalived/libipvs-2.6/libipvs.a(libipvs.o):/usr/local/src/tools/keepalived/keepalived/libipvs-2.6/libipvs.c:437: more undefined references to `nlmsg_free' follow collect2: ld returned 1 exit status make: *** [ipvsadm] Error 1 解决办法： 这是由于服务器上安装了libnl，卸载libnl、libnl-devel之后，重新编译keepalived和ipvsadm即可。