SqlServer分页查询

下面的是SqlServer 通用分页查询的存储过程，不过此方法只适合单表查询。

CREATE PROCEDURE CommonPageIndexSearch
@fileds NVARCHAR(200)='*',--需要查询的字段
@orderField NVARCHAR(10)='Id',--排序字段，一般分页查询都用主键作为排序字段
@tableName NVARCHAR(20),--需要查询的表名
@condition NVARCHAR(400),--查询条件，如：AND 1=1
@begin NVARCHAR(10),--分页查询开始行
@end NVARCHAR(10)----分页查询结束行
AS
BEGIN
    DECLARE @SQL NVARCHAR(4000);
    SET @SQL='SELECT * FROM (SELECT ROW_NUMBER(ORDER BY '+@orderField+') AS Line'
             +@fileds+' FROM '+@tableName +' WHERE 1=1 '+@condition+')A 
             WHERE A.Line>'+@begin+' AND A.Line<='+@end;
    EXECUTE(@SQL);
END

有个更复杂的通用分页查询存储过程,结合了正则表达式，支持多表联接查询

GO

/****** Object:  StoredProcedure [dbo].[CustomPaged]    Script Date: 2013/11/4 0:42:10 ******/
SET ANSI_NULLS ON
GO

SET QUOTED_IDENTIFIER ON
GO
--
DROP PROC[dbo].[CustomPaged]
go
CREATE PROC [dbo].[CustomPaged]
    @tablename NVARCHAR(100) = NULL ,--所要查询的表或视图名 不可以设置表别名 表名在关系表中设置 tablename a
    @nexusStr NVARCHAR(1000) = '' ,--关系表 left join tablename b on a.columnname=b.columnname
    @columnsName NVARCHAR(1000) = '*' ,--查询所需的列名
    @rankOrder NVARCHAR(2000) = '' ,--流水号排序列以及方式
    @currentIndex INT = 1 ,--页码 按正常页面写参数就可以了
    @pagesize INT = 10 ,--每页的行数量
    @where NVARCHAR(2000) = '' ,--查询条件
    @order NVARCHAR(2000) = '' ,--排序列
    @AllCount INT OUTPUT--jieguohang
AS
    BEGIN
        IF ( ISNULL(@tablename, '') != '' )
            BEGIN
                SET nocount ON;

                DECLARE @tempTableName VARCHAR(1000);

                SELECT  @tempTableName = '[##' + RTRIM(LTRIM(REPLACE(hostname,
                                                              '-', '_')))
                        + '_' + RTRIM(LTRIM(net_address)) + '_'
                        + dbo.regexReplace(@tablename, '[^\w]', '_', 0, 0)
                        + '_' + CAST(@@SPID AS VARCHAR(10)) + ']'
                FROM    master..sysprocesses
                WHERE   spid = @@SPID

                IF ( ISNULL(@columnsName, '') = '' )
                    SET @columnsName = '*';
                IF ( ISNULL(@rankorder, '') = '' )
                    BEGIN
            --判断该表是否存在主键
                        IF EXISTS ( SELECT  keyno
                                    FROM    sysindexkeys
                                    WHERE   id = OBJECT_ID(@tablename) )
                            BEGIN
                                SELECT  @rankorder = name
                                FROM    SysColumns
                                WHERE   id = OBJECT_ID(@tablename)
                                        AND colid = ( SELECT TOP 1
                                                              keyno
                                                      FROM    sysindexkeys
                                                      WHERE   id = OBJECT_ID(@tablename)
                                                    ) 
                            END
                        ELSE
                            BEGIN
                                SELECT TOP 1
                                        @rankorder = name
                                FROM    SysColumns
                                WHERE   id = OBJECT_ID(@tablename) 
                            END
                    END
                DECLARE @sql NVARCHAR(2000)

                SET @sql = 'select row_number() over(order by ' + @rankOrder
                    + ') as rankid,' + @columnsName + ' into '
                    + @tempTableName + ' from ' + @tablename;
                IF ( ISNULL(@nexusStr, '') != '' )
                    SET @sql = @sql + ' ' + @nexusStr;

        --添加查询条件
                IF ( LEN(@where) > 0 )
                    BEGIN
                        SET @sql = @sql + ' where ' + @where;
                    END
        --添加排序列
                IF ( LEN(@order) > 0 )
                    BEGIN

                        SET @sql = @sql + ' order by ' + @order
                    END

        --动态执行sql语句
                EXEC(@sql);

                DECLARE @totality INT;
                SET @sql = 'select @total=COUNT(*) from ' + @tempTableName;
                EXEC sp_executesql @sql, N'@total int output',
                    @totality OUTPUT;

        --验证当查询的前页是否超出查询的页，超过则返回查询也的第一页
                DECLARE @IsHavePage BIT;
                IF ( @totality % @pagesize > 0 )
                    SET @IsHavePage = 1;
                ELSE
                    SET @IsHavePage = 0;
                IF @totality / @pagesize + CAST(@IsHavePage AS INT) < @currentIndex--当前总页数/每页显示数
                    SET @currentIndex = 1;
                ELSE    
        --在排序页中的页码索引应该从0开始为第一页
                    SET @currentIndex = @currentIndex - 1;
                SET @sql = 'select * from ' + @tempTableName
                    + ' where rankid>' + CONVERT(VARCHAR(10), @currentIndex
                    * @pagesize) + ' and rankid<='
                    + CONVERT(VARCHAR(10), @currentIndex * @pagesize
                    + @pagesize);

                SET @sql = @sql + ';drop table ' + @tempTableName;

                EXEC(@sql);

                SET nocount OFF;
                SET @AllCount = ISNULL(@totality, 0);
            END
    END

GO

在调用上面的存储过程之前，必须先在数据库中执行以下方法

--正则替换  
--开启xp_cmdshell  
--不开启会提示：SQL Server blocked access to procedure 'xp_cmdshell'  
go  
sp_configure 'show advanced options', 1  
go  
reconfigure  
go  
sp_configure 'xp_cmdshell', 1  
go  
reconfigure  
--开启sp_OACreate  
--不开启会提示：SQL Server blocked access to procedure 'sys.sp_OACreate'  
go  
sp_configure 'show advanced options', 1;  
go  
reconfigure;  
go  
sp_configure 'ole automation procedures', 1;  
go  
reconfigure;  
go  

drop function [regexReplace]
go
--创建函数  
create function [dbo].[regexReplace]  
(  
    @source varchar(8000),    --字符串  
    @regexp varchar(500),     --正则表换式  
    @replace varchar(500),    --替换值  
    @globalReplace bit = 0,   --是否是全局替换  
    @ignoreCase bit = 0       --是否忽略大小写  
)  
returns varchar(1000) AS  
begin  
    declare @hr int  
    declare @objRegExp int  
    declare @result varchar(5000)  
  
    exec @hr = sp_OACreate 'VBScript.RegExp', @objRegExp output  
    if @hr <> 0   
    begin  
        exec @hr = sp_OADestroy @objRegExp  
        return null  
    end  
    exec @hr = sp_OASetProperty @objRegExp, 'Pattern', @regexp  
    if @hr <> 0   
    begin  
        exec @hr = sp_OADestroy @objRegExp  
        return null  
    end  
    exec @hr = sp_OASetProperty @objRegExp, 'Global', @globalReplace  
    if @hr <> 0   
    begin  
        exec @hr = sp_OADestroy @objRegExp  
        return null  
    end  
    exec @hr = sp_OASetProperty @objRegExp, 'IgnoreCase', @ignoreCase  
    if @hr <> 0   
    begin  
        exec @hr = sp_OADestroy @objRegExp  
        return null  
    end   
    exec @hr = sp_OAMethod @objRegExp, 'Replace', @result output, @source, @replace  
    if @hr <> 0   
    begin  
        exec @hr = sp_OADestroy @objRegExp  
        return null  
    end  
    exec @hr = sp_OADestroy @objRegExp  
    if @hr <> 0   
    begin  
        return null  
    end  
/* 注释A  
--    while (charindex('..',@result)<>0)  
--    begin  
--        set @result=replace(@result,'..','.')  
--    end  
--    if(left(@result,1)='.')  
--        set @result=right(@result,len(@result)-1)  
--    if(right(@result,1)='.')  
--        set @result=left(@result,len(@result)-1)  
*/  
    return @result  
end  

大功告成