show catalyst 6000
 
To display the information about the Cisco ME6500 series Ethernet switch, use the show catalyst 6000 command.
 
使用这个命令显示 CiscoME6500 系列交换机相关信息
 
   show  catalyst6000 {all | chassis-mac-address | switching-clock | traffic-meter}
 
syntax description
 
语法描述
 
all     Displays the MAC-address ranges and the current and peak traffice-meter reading.
 
all     显示交换机MAC地址范围，当前和历史最高使用率
 
chassis-mac-address  Displays the MAC-address range.
 
chassis-mac-address   显示MAC地址范围
 
switching-clock  Displays the failure recovery mode of the switching clock.
 
switching-clock  显示交换机时钟的失败恢复模式（？？？不明白命令什么意思）
 
traffic-meter  Display the percentage of the backplane (shared bus) utilization.
 
traffic-meter  显示这个背板利用率
 
Usage Guidelines
 
使用手册
 
The switching-clock keywords are not supported on the Cisco ME 6500 series Ethernet switch. The cisco ME6500 series Ethernet switch has 64MAC address that are available to support the software features.You can enter the show catalyst6000 chassis-mac-address command to display the MAC-address range on your chassis.
 
cisco ME 6500 不支持 switching-clock 关键字，cisco ME 6500 有64个可用的MAC地址。可以使用show catalyst 6000 chassis-mac-address 命令查看交换机MAC地址范围。
 
Examples
 
例子
 
This example shows how to display the MAC-address ranges and the current and peak traffic-meter readings:
 
这个例子显示交换机的MAC地址范围和当前与最高背板使用率
 
switch#show catalyst6000 all
  chassis MAC addresses: 1023 addresses from 0007.847b.c400 to 0007.847b.c7ff
  traffic meter = 15%   peak = 18%  at  13:13:29 GMT Fri Sep 7 2007
  switching-clock: clock switchover and system reset is allowed

switch#show catalyst6000 
  all                    show all Catalyst 6000 information
  chassis-mac-addresses  chassis MAC address range
  switching-clock        switching-clock failure recovery mode
  traffic-meter          current and peak traffic meter reading
  |                      Output modifiers
 

switch#show catalyst6000 chassis-mac-addresses
  chassis MAC addresses: 1023 addresses from 0007.847b.c400 to 0007.847b.c7ff
              
switch#show catalyst6000 traffic-meter
  traffic meter = 16%   peak = 18%  at  13:13:29 GMT Fri Sep 7 2007
          
switch#show catalyst6000 switching-clock
  switching-clock: clock switchover and system reset is allowed