B3.5. Common Specifications

B3.5 通用规格

 数据和消息区的背景颜色
白色：表示相同行中的相应值为ACTIVE；
灰色：表示相同行中的相应值为INACTIVE。
 数据不出现
当显示数据不存在时，数据字符颜色和背景颜色变为灰色，并且数据列中不显示任何内容。
 输入数据
每个视图上可以输入数据的单元格框用黑色边框显示。

Fig. B 3.10 Parameters that can be input 图B 3.10可以输入的参数

 修改时的字符颜色
当输入新值时，颜色将从黑色变为蓝色。
通过单击Apply或Undo按钮确认，颜色将从蓝色变回到黑色。
 过程位号数据
当位号名称未正确定义时，其值显示为灰色的-9999。
灰色：仅显示
 手动输入数据
当未通过离线RQE将位号名称分配给手动输入数据时，默认位号名称将自动按如下分配：
ManInput（N）：在输入顺序中，N从1开始分配。
 Apply/Undo（应用/撤消）按钮
当单击了对话框上的Apply（应用）按钮时，接受输入数据。
当单击Undo（撤消）按钮时，输入数据被拒绝，并显示先前的数据。
 退出
通过单击File -> Exit（文件 - >退出）或单击关闭屏幕右上角的窗口图标Close the window（关闭面板）。
 显示模式
在APC客户端PC中，可使用工程模式和操作员模式。
Exarqe工程显示只能在工程模式下打开。与其他面板中的模式没有区别。
工程师和操作员模式在安装时选择。在Web客户端中，客户可以使用客户端构建器定义操作模式。
 显示数据
可以使用后面描述的Client Window Builder（客户端窗口搭建器）编辑每个视图的显示数据。下例的显示为默认值。
 DCS项目名
“位号名称+项目名称”的最大长度为64个字符。
 每个视图的刷新周期
这取决于系统环境。以下是标准性能数据。
主面板刷新周期：30秒
ICON状态刷新周期：17秒（HMI客户端，APC客户端）
30秒（Web客户端）
 初始显示
当应用程序视图上显示的数据量较大时，将显示一个登录时间。在这种情况下，屏幕上将显示“Loading…（正在加载...）”的消息。
 当应用程序（控制器/预估器）停止时
当应用程序停止时，数据仍显示在每个应用程序视图上，但这些数据无法在屏幕上进行设置或更改。
从下一章开始将解释每个视图的详细信息。
注意：
在R4中，可以使用Client Window Builder（客户端窗口构建器）选择每个视图中显示的数据项。默认视图也已准备好，即使它并不包括在所有项目中。

---

原文：

B3.5. Common Specifications

 Background color of data and message area
White: It shows the corresponding values in the same row are ACTIVE.
Gray: It shows the corresponding values in the same row are INACTIVE.
 Data no appear
The data character color and the background color become gray when the display data doesn't exist, and nothing is displayed in the data column.
 Entry Data
The cell frame where data can be entered on each view is shown with black border.
 Character color when modified
When a new value is entered, the color will change from Black to Blue.
After confirming it by clicking ˉApplyˇ or ˉUndoˇ button, the color will be back from Blue to Black.
 Process tag data
When the tag name is not defined correctly, its value is displayed as ˉ-9999ˇ in gray.
Gray: Display only
 Manual input data
When the tag name is not assigned to manual input data by RQE offline, the default tag name is automatically assigned as follows:
ManInput(N): N is assigned from 1 in the input order.
 Apply/Undo button
When the Apply button on the dialog is clicked, the input data is accepted.
When the Undo button is clicked, the input data is rejected and the previous data is displayed.
 Exit
The panel is closed by clicking File -> Exit or click the Close the window icon at the up-right corner of the screen.
 Display mode
In the APC client PC, the engineering mode and the operator mode are available.
Exarqe Engineering Display can be opened only for the engineering mode. There is no difference by the mode in other panels.
The Selection of engineer and operator mode is on installation. In the Web client, the customer can define the operation mode using the client builder.
 Display Data
The display data of each view can be edited by using Client Window Builder described later. The following examples of the screen are the default values.
 DCS Item name
Maximum length of ‘Tag name + Item name’ is totally 64 characters.
 Refresh period of each views
It depends on the system environment. Following is the standard performance data.
Main panel refresh period: 30 second
ICON status refresh period : 17 second (HMI client, APC client)
30 second (Web client)
 Initial display
When the number of data displayed on an application view is large, it will take a logn time to be displayed. In this case the message “Loading…” will appear on the screen.
 When the application (controller / estimator) stops
When the application stops, the data are still shown on each application view, though these data cannot be set or changed from the screen.
From the next chapter, detail information of each view is explained.
Cation:
In R4, data items displayed in each view can be selectable using the Client Window Builder. The default view is also prepared, even though it does not include all items.

---

2016.12.8