Filebeat快速入门

本笔记整理于https://www.elastic.co/guide/en/beats/filebeat/current/filebeat-installation.html，仅做个人学习总结使用。
Filebeat是轻量级日志采集工具，经常与ELK搭配使用，作为数据采集源头使用。

filebeat使用示意图

Filebeat快速入门_第1张图片

安装部署

Centos7(作者使用)

由于下载太慢了，所以我这里保存了一个下载好的版本（filebeat-6.3.2-linux-x86_64.tar）,如果使用请自取：https://quqi.gblhgk.com/s/1727102/vafFOSOsw5AXKP3d

上传到服务器，解压即可

deb(未尝试):

    curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.6.1-amd64.deb
    sudo dpkg -i filebeat-7.6.1-amd64.deb

rpm(未尝试):

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.6.1-x86_64.rpm
sudo rpm -vi filebeat-7.6.1-x86_64.rpm

mac(未尝试):

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.6.1-darwin-x86_64.tar.gz
tar xzvf filebeat-7.6.1-darwin-x86_64.tar.gz

linux(未尝试):

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.6.1-linux-x86_64.tar.gz
tar xzvf filebeat-7.6.1-linux-x86_64.tar.gz

Windows(未尝试)：

  1. 下载 https://download.elastic.co/beats/filebeat/filebeat-5.0.0-windows.zip

  2. 解压到 C:\Program Files
  3. 重命名 filebeat-5.0.0-windows 目录为 Filebeat
  4. 右键点击 PowerSHell 图标，选择『以管理员身份运行』
  5. 运行下列命令，将 Filebeat 安装成 windows 服务： 
    PS > cd 'C:\Program Files\Filebeat'
PS C:\Program Files\Filebeat> .\install-service-filebeat.ps1

注意
可能需要额外授予执行权限。命令为：PowerShell.exe -ExecutionPolicy RemoteSigned -File .\install-service-filebeat.ps1

快速使用

作者环境：centos7、JDK8、filebeat-6.3.2、logstash-6.5.1

filebeat.yml配置

修改filebeat.yml配置文件，主要修改节点【filebeat.inputs、 paths、 include_lines、name、(output.logstash)】

按需修改，我这里配置filebeat需要监听【 /shaofei/logs】文件夹下后缀为[.log]的文件，监听的关键字是【'Exception','用户登录异常'】，
注意： 如果需要监听中文，需要保证文件编码为UTF-8。或者使用【encoding】指定所监听的文件编码
我配置了name: 为"study128"，我这里使用Logstash作为它的输出端【 Logstash output 】,即使没有接收端来接收filebeat输出的日志也不会影响filebeat的启动
修改配置文件的时候一定要注意yml的格式

###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.

#=========================== Filebeat inputs =============================

filebeat.inputs:

# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.

- type: log

  # Change to true to enable this input configuration.
  enabled: true

  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /filebeat/testlogs/input/*.log 
  include_lines: ['Exception','用户登录异常']
    #- c:\programdata\elasticsearch\logs\*
  #encoding: gbk
  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ['^ERR', '^WARN']

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #exclude_files: ['.gz$']

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  ### Multiline options

  # Mutiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  #multiline.pattern: ^\[

  # Defines if the pattern set under pattern should be negated or not. Default is false.
  #multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  #multiline.match: after

multiline:
 tail_files: true

#============================= Filebeat modules ===============================

filebeat.config.modules:
  # Glob pattern for configuration loading
  path: ${path.config}/modules.d/*.yml

  # Set to true to enable config reloading
  reload.enabled: false

  # Period on which files under path should be checked for changes
  #reload.period: 10s

#==================== Elasticsearch template setting ==========================

#setup.template.settings:
  #index.number_of_shards: 3
  #index.codec: best_compression
  #_source.enabled: false

#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
name: "study128"

# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
#  env: staging

#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
#setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

#============================= Elastic Cloud ==================================

# These settings simplify using filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `:`.
#cloud.auth:

#================================ Outputs =====================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output ------------------------------
#output.elasticsearch:
  # Array of hosts to connect to.
  #hosts: ["localhost:9200"]

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

#----------------------------- Logstash output --------------------------------
output.logstash:
  # The Logstash hosts
  hosts: ["127.0.0.1:10515"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

#================================ Logging =====================================

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]

#============================== Xpack Monitoring ===============================
# filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster.  This requires xpack monitoring to be enabled in Elasticsearch.  The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#xpack.monitoring.enabled: false

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well. Any setting that is not set is
# automatically inherited from the Elasticsearch output configuration, so if you
# have the Elasticsearch output configured, you can simply uncomment the
# following line.
#xpack.monitoring.elasticsearch:
#scan_frequency: 30s
#----------------------------- kafka output --------------------------------  
#output.kafka:
#  enabled: true
#  hosts: ["132.228.248.201:9092","132.228.248.202:9092","132.228.248.203:9092"]
#  topic: ETE_CBA_ZZQS_LOG_ERROR
#  version: 0.10.0.1

启动filebeat

./filebeat -e -c filebeat.yml -d "publish"

由于filebeat.yml启动会报错，执行修改filebeat.yml的权限（使用其建议的命令即可）

在这里插入图片描述

启动成功

Filebeat快速入门_第2张图片

注意： 要保证filebeat.yml配置的采集路径是有读取权限的！

测试采集是否成功

  1. 在指定目录下创建测试日志
echo "
    2020-03-27 16:51:25,422 ERROR com.quxuecx.Start ->net.sf.json.JSONException: JSONObject["matchID"] not found.
    2020-03-27 16:51:25,422 ERROR com.quxuecx.Start ->net.sf.json.JSONException: JSONObject["matchID"] not found.
    2020-03-27 16:51:25,422 ERROR com.quxuecx.Start ->net.sf.json.JSONException: JSONObject["matchID"] not found.
">>b.log
  1. 成功

Filebeat快速入门_第3张图片

注意： 如果没有看到上述采集成功的图片，请仔细检查filebeat.yml配置文件以及所监听路径和文件的权限是否可以读取。
注意： 文件的内容，必须为log日志格式以及包括你所监听的关键字，请注意。

Filebeat快速入门_第4张图片

对接logstash测试

特别注意： filebeat.yml中配置的output.logstash: hosts: ["127.0.0.1:10515"]其中10515这个端口要和logstash配置文件中input filebeat的端口一致。

logstash的概述请查看>> https://blog.csdn.net/pyfysf/article/details/100942174

logstash的配置文件log_error.conf

input {
    # 配置filebeat
    beats {
        port => 10515
    }
}

filter {

}

output {

    # 配置输出到文件中
    file{
       path=>"/home/shaofei/output.log"
    }

    #配置输出到控制台
    stdout{
        codec=>rubydebug
    }
}

启动logstash

./bin/logstash -rf ./config/log_error.conf

配置文件log_error.conf

input {
    # 配置filebeat
    beats {
        port => 10515
    }
}

filter {

}

output {

    # 配置输出到文件中
    file{
       path=>"/home/shaofei/output.log"
    }

    #配置输出到控制台
    stdout{
        codec=>rubydebug
    }
}

启动logstash

./bin/logstash -rf ./config/log_error.conf