一、eigrp的默认路由

EIGRP默认路由通告的三种方法以及汇总的实现_第1张图片

1.重分布静态路由

首先确保在R1上做一条静态默认路由,第二步将默认路由重分布到eigrp

ip route 0.0.0.0 0.0.0.0 s0/1

redistribute static

重分布之前

Gateway of last resort is not set

35.0.0.0/24 is subnetted, 1 subnets

C 35.1.1.0 is directly connected, Serial0/1

13.0.0.0/24 is subnetted, 1 subnets

C 13.1.1.0 is directly connected, Serial0/0

重分布以后

Gateway of last resort is 13.1.1.1 to network 0.0.0.0

35.0.0.0/24 is subnetted, 1 subnets

C 35.1.1.0 is directly connected, Serial0/1

13.0.0.0/24 is subnetted, 1 subnets

C 13.1.1.0 is directly connected, Serial0/0

D*EX 0.0.0.0/0 [170/2681856] via 13.1.1.1, 00:00:03, Serial0/0

2. network 0.0.0.0

在R1做默认路由,下一跳指向外网口;第二步network 0.0.0.0

Gateway of last resort is 13.1.1.1 to network 0.0.0.0

35.0.0.0/24 is subnetted, 1 subnets

C 35.1.1.0 is directly connected, Serial0/1

D 200.1.1.0/24 [90/2297856] via 13.1.1.1, 00:00:02, Serial0/0

13.0.0.0/24 is subnetted, 1 subnets

C 13.1.1.0 is directly connected, Serial0/0

D* 0.0.0.0/0 [90/2297856] via 13.1.1.1, 00:00:02, Serial0/0

3.ip default-network

在全局下ip default-network 10.0.0.0

路由进程下network 10.0.0.0

本地有 10.0.0.0/8 的路由,用ip route 10.0.0.0 255.0.0.0

Gateway of last resort is not set

35.0.0.0/24 is subnetted, 1 subnets

C 35.1.1.0 is directly connected, Serial0/1

10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks

D 10.1.1.0/24 [90/2297856] via 13.1.1.1, 00:00:29, Serial0/0

D* 10.0.0.0/8 [90/2169856] via 13.1.1.1, 00:00:01, Serial0/0

13.0.0.0/24 is subnetted, 1 subnets

C 13.1.1.0 is directly connected, Serial0/0

 

二、eigrp手工汇总

在接口下做手工汇总,路由传播方向的出接口做

在本地会自动产生一条空接口路由

汇总路由何时消息:当最后一条明细路由消息时才会消失

汇总的Metric值取明细路由中最小的值

EIGRP默认路由通告的三种方法以及汇总的实现_第2张图片

在R3上看路由表

1.0.0.0/22 is subnetted, 1 subnets

D 1.1.0.0 [90/2297856] via 13.1.1.1, 00:00:03, Serial0/0

35.0.0.0/24 is subnetted, 1 subnets

C 35.1.1.0 is directly connected, Serial0/1

13.0.0.0/24 is subnetted, 1 subnets

C 13.1.1.0 is directly connected, Serial0/0

 

 

Technorati 标签: EIGRP默认路由