HDU 4280 Island Transport 第37届ACM/ICPC 天津网络赛1003题 （最大流模板题，高效SAP模板）...

Island Transport

Time Limit: 20000/10000 MS (Java/Others)    Memory Limit: 65536/65536 K (Java/Others)
Total Submission(s): 1296    Accepted Submission(s): 421

Problem Description

　　In the vast waters far far away, there are many islands. People are living on the islands, and all the transport among the islands relies on the ships.
　　You have a transportation company there. Some routes are opened for passengers. Each route is a straight line connecting two different islands, and it is bidirectional. Within an hour, a route can transport a certain number of passengers in one direction. For safety, no two routes are cross or overlap and no routes will pass an island except the departing island and the arriving island. Each island can be treated as a point on the XY plane coordinate system. X coordinate increase from west to east, and Y coordinate increase from south to north.
　　The transport capacity is important to you. Suppose many passengers depart from the westernmost island and would like to arrive at the easternmost island, the maximum number of passengers arrive at the latter within every hour is the transport capacity. Please calculate it.

 

 

Input

　　The first line contains one integer T (1<=T<=20), the number of test cases.
　　Then T test cases follow. The first line of each test case contains two integers N and M (2<=N,M<=100000), the number of islands and the number of routes. Islands are number from 1 to N.
　　Then N lines follow. Each line contain two integers, the X and Y coordinate of an island. The K-th line in the N lines describes the island K. The absolute values of all the coordinates are no more than 100000.
　　Then M lines follow. Each line contains three integers I1, I2 (1<=I1,I2<=N) and C (1<=C<=10000) . It means there is a route connecting island I1 and island I2, and it can transport C passengers in one direction within an hour.
　　It is guaranteed that the routes obey the rules described above. There is only one island is westernmost and only one island is easternmost. No two islands would have the same coordinates. Each island can go to any other island by the routes.

 

 

Output

　　For each test case, output an integer in one line, the transport capacity.

 

 

Sample Input

2 5 7 3 3 3 0 3 1 0 0 4 5 1 3 3 2 3 4 2 4 3 1 5 6 4 5 3 1 4 4 3 4 2 6 7 -1 -1 0 1 0 2 1 0 1 1 2 3 1 2 1 2 3 6 4 5 5 5 6 3 1 4 6 2 5 5 3 6 4

 

 

Sample Output

9 6

 

 

Source

2012 ACM/ICPC Asia Regional Tianjin Online

 

 

Recommend

liuyiding

 

 

以前最大流一直用的EK，对于数据比较大的做不了。

学了下SAP最大流算法。

模板题：

/*
最大流模板
sap
*/
#include
#include<string.h>
#include
#include
using namespace std;

const int MAXN=100010;//点数的最大值
const int MAXM=400010;//边数的最大值
const int INF=0x3f3f3f3f;

struct Node
{
    int from,to,next;
    int cap;
}edge[MAXM];
int tol;
int head[MAXN];
int dep[MAXN];
int gap[MAXN];//gap[x]=y :说明残留网络中dep[i]==x的个数为y

int n;//n是总的点的个数，包括源点和汇点

void init()
{
    tol=0;
    memset(head,-1,sizeof(head));
}

void addedge(int u,int v,int w)
{
    edge[tol].from=u;
    edge[tol].to=v;
    edge[tol].cap=w;
    edge[tol].next=head[u];
    head[u]=tol++;
    edge[tol].from=v;
    edge[tol].to=u;
    edge[tol].cap=0;
    edge[tol].next=head[v];
    head[v]=tol++;
}
void BFS(int start,int end)
{
    memset(dep,-1,sizeof(dep));
    memset(gap,0,sizeof(gap));
    gap[0]=1;
    int que[MAXN];
    int front,rear;
    front=rear=0;
    dep[end]=0;
    que[rear++]=end;
    while(front!=rear)
    {
        int u=que[front++];
        if(front==MAXN)front=0;
        for(int i=head[u];i!=-1;i=edge[i].next)
        {
            int v=edge[i].to;
            if(dep[v]!=-1)continue;
            que[rear++]=v;
            if(rear==MAXN)rear=0;
            dep[v]=dep[u]+1;
            ++gap[dep[v]];
        }
    }
}
int SAP(int start,int end)
{
    int res=0;
    BFS(start,end);
    int cur[MAXN];
    int S[MAXN];
    int top=0;
    memcpy(cur,head,sizeof(head));
    int u=start;
    int i;
    while(dep[start]<n)
    {
        if(u==end)
        {
            int temp=INF;
            int inser;
            for(i=0;i)
               if(temp>edge[S[i]].cap)
               {
                   temp=edge[S[i]].cap;
                   inser=i;
               }
            for(i=0;i)
            {
                edge[S[i]].cap-=temp;
                edge[S[i]^1].cap+=temp;
            }
            res+=temp;
            top=inser;
            u=edge[S[top]].from;
        }
        if(u!=end&&gap[dep[u]-1]==0)//出现断层，无增广路
          break;
        for(i=cur[u];i!=-1;i=edge[i].next)
           if(edge[i].cap!=0&&dep[u]==dep[edge[i].to]+1)
             break;
        if(i!=-1)
        {
            cur[u]=i;
            S[top++]=i;
            u=edge[i].to;
        }
        else
        {
            int min=n;
            for(i=head[u];i!=-1;i=edge[i].next)
            {
                if(edge[i].cap==0)continue;
                if(min>dep[edge[i].to])
                {
                    min=dep[edge[i].to];
                    cur[u]=i;
                }
            }
            --gap[dep[u]];
            dep[u]=min+1;
            ++gap[dep[u]];
            if(u!=start)u=edge[S[--top]].from;
        }
    }
    return res;
}

int main()
{
   // freopen("in.txt","r",stdin);
  //  freopen("out.txt","w",stdout);
    int start,end;
    int m;
    int u,v,z;
    int T;
    scanf("%d",&T);

    while(T--)
    {
        init();
        scanf("%d%d",&n,&m);
        int minx=10000000;
        int maxx=-10000000;
        int x,y;
        for(int i=1;i<=n;i++)
        {
            scanf("%d%d",&x,&y);
            if(minx>x)
            {
                minx=x;
                start=i;
            }
            if(maxx<x)
            {
                maxx=x;
                end=i;
            }
        }


        while(m--)
        {
            scanf("%d%d%d",&u,&v,&z);
            addedge(u,v,z);
            addedge(v,u,z);
        }
        //n一定是点的总数，这是使用SAP模板需要注意的
        int ans=SAP(start,end);
        printf("%d\n",ans);
    }
    return 0;
}