ffplay相关函数
av_gettime_relative
int64_t av_gettime_relative(void)
{
#if HAVE_CLOCK_GETTIME && defined(CLOCK_MONOTONIC)
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts); 从系统启动这一刻起开始计时,不受系统时间被用户改变的影响。
return (int64_t)ts.tv_sec * 1000000 + ts.tv_nsec / 1000; //秒跟纳秒
#else
return av_gettime();
#endif
}
av_get_channel_layout_nb_channels av_get_default_channel_layout
通过av_get_channel_layout_nb_channels()和av_get_default_channel_layout()这些函数可以得到channels和channellayout的转换。
libavutil中的audioconvert.c定义channellayout和channels的相关map：
channel_layout_map[]
{ "mono",
{ "stereo", 2, AV_CH_LAYOUT_STEREO},
{ "2.1", 3, AV_CH_LAYOUT_2POINT1},
{ "3.0", 3, AV_CH_LAYOUT_SURROUND},
{"3.0(back)", 3, AV_CH_LAYOUT_2_1},
{ "4.0", 4, AV_CH_LAYOUT_4POINT0},
{ "quad", 4, AV_CH_LAYOUT_QUAD},
{"quad(side)", 4, AV_CH_LAYOUT_2_2},
{ "3.1", 4, AV_CH_LAYOUT_3POINT1},
{ "5.0", 5, AV_CH_LAYOUT_5POINT0_BACK},
{"5.0(side)", 5, AV_CH_LAYOUT_5POINT0},
{ "4.1", 5, AV_CH_LAYOUT_4POINT1},
{ "5.1", 6, AV_CH_LAYOUT_5POINT1_BACK},
{"5.1(side)", 6, AV_CH_LAYOUT_5POINT1},
{ "6.0", 6, AV_CH_LAYOUT_6POINT0},
{"6.0(front)", 6, AV_CH_LAYOUT_6POINT0_FRONT},
{"hexagonal", 6, AV_CH_LAYOUT_HEXAGONAL},
{ "6.1", 7, AV_CH_LAYOUT_6POINT1},
{ "6.1", 7, AV_CH_LAYOUT_6POINT1_BACK},
{"6.1(front)", 7, AV_CH_LAYOUT_6POINT1_FRONT},
{ "7.0", 7, AV_CH_LAYOUT_7POINT0},
{"7.0(front)", 7, AV_CH_LAYOUT_7POINT0_FRONT},
{ "7.1", 8, AV_CH_LAYOUT_7POINT1},
{"7.1(wide)", 8, AV_CH_LAYOUT_7POINT1_WIDE},
{"octagonal", 8, AV_CH_LAYOUT_OCTAGONAL},
{"downmix", 2, AV_CH_LAYOUT_STEREO_DOWNMIX,},
av_q2d
return a.num / (double) a.den;
}
av_rescaleint64_t av_rescale(int64_t a, int64_t b, int64_t c) av_const;；返回 a*b/c。
av_rescale_q
int64_t av_rescale_q(int64_t a, AVRational bq, AVRational cq)；返回 a * bq / cq。
av_sample_get_buffer_size
用来计算音频占用的字节数,音频所占用字节数 = 通道数 * 采用频率(Hz) * 采用位数(byte)。
av_seek_frame
当需要把视频跳转到N秒的时候可以使用下面的方法：
int64_t timestamp = N * AV_TIME_BASE;
av_seek_frame(fmtctx, index_of_video, timestamp, AVSEEK_FLAG_BACKWARD);