本文描述iOS中基本的钥匙串访问，内容整理于苹果官方文档。
本文主要讲述以下内容：
- 钥匙串中添加一个条目
- 钥匙串中查找条目
- 获取钥匙串条目中的属性和数据
- 改变钥匙串条目中的属性和数据
注意:在iPhone上,钥匙链的访问权限取决于签名应用程序的描述文件。在应用程序版本中务必要一直使用相同的描述文件。
向应用程序中添加钥匙串服务
大多数iOS应用程序使用钥匙串只是向钥匙串中添加一个密码,修改现有的钥匙串条目,或者在需要的时候检索一个密码。钥匙串服务提供了以下方法来完成这些任务:
- SecItemAdd 向钥匙串中添加一个条目
- SecItemUpdate 更改钥匙串中已有的条目
- SecItemCopyMatching 查找钥匙串条目并提取信息
下图展示了应用程序如何使用这些函数来访问互联网的FTP服务器的流程图。
应用程序用户从选择一个文件传输协议(FTP)服务器开始。应用程序调用SecItemCopyMatching,传一个包含确定密钥串条目的属性的字典。如果钥匙串里有密码, 函数将密码返回到应用程序,将它发送到FTP服务器对用户进行身份验证。如果身份验证成功,结束。如果身份验证失败,应用程序显示一个对话框,要求输入户名和密码。
如果钥匙串里没有相应的密码，SecItemCopyMatching返回errSecItemNotFound结果代码。在这种情况下,应用程序显示一个对话框,要求输入户名和密码。(这个对话框还应该包括一个取消按钮,为了避免流程图变得过于复杂已经省略了)。
从用户那里拿到密码之后,该应用程序继续到FTP服务器验证用户的身份。身份验证成功时,应用程序可以假设用户输入的信息是有效的。应用程序然后显示另一个对话框询问用户是否保存密码钥匙链。如果用户选择不,那么结束。如果用户选择是,则应用程序调用SecItemAdd函数(如果这是一个新的钥匙串条目)或SecItemUpdate函数(更新现有的钥匙串条目)，然后结束。
以下代码展示了一个可能使用钥匙串服务功能典型的应用程序，为通用项目获取和设置密码。使用同样的方法你可以获取和设置钥匙串条目属性(如用户名或服务名称)。
以下代码来自苹果官方
注意引入Security.Framework
KeychainWrapper.h
#import
#import
@interface KeychainWrapper : NSObject{
NSMutableDictionary *keychainData;
NSMutableDictionary *genericPasswordQuery;
}
@property (nonatomic, strong) NSMutableDictionary *keychainData;
@property (nonatomic, strong) NSMutableDictionary *genericPasswordQuery;
- (void)mySetObject:(id)inObject forKey:(id)key;
- (id)myObjectForKey:(id)key;
- (void)resetKeychainItem;
@end
KeychainWrapper.m
//Unique string used to identify the keychain item:
static const UInt8 kKeychainItemIdentifier[] = "com.ios.doris";
@implementation KeychainWrapper
- (id)init
{
if ((self = [super init])) {
OSStatus keychainErr = noErr;
// Set up the keychain search dictionary:
genericPasswordQuery = [[NSMutableDictionary alloc] init];
// This keychain item is a generic password.
[genericPasswordQuery setObject:(__bridge id)kSecClassGenericPassword
forKey:(__bridge id)kSecClass];
// The kSecAttrGeneric attribute is used to store a unique string that is used
// to easily identify and find this keychain item. The string is first
// converted to an NSData object:
NSData *keychainItemID = [NSData dataWithBytes:kKeychainItemIdentifier
length:strlen((const char *)kKeychainItemIdentifier)];
[genericPasswordQuery setObject:keychainItemID forKey:(__bridge id)kSecAttrGeneric];
// Return the attributes of the first match only:
[genericPasswordQuery setObject:(__bridge id)kSecMatchLimitOne forKey:(__bridge id)kSecMatchLimit];
// Return the attributes of the keychain item (the password is
// acquired in the secItemFormatToDictionary: method):
[genericPasswordQuery setObject:(__bridge id)kCFBooleanTrue
forKey:(__bridge id)kSecReturnAttributes];
//Initialize the dictionary used to hold return data from the keychain:
CFMutableDictionaryRef outDictionary = nil;
// If the keychain item exists, return the attributes of the item:
keychainErr = SecItemCopyMatching((__bridge CFDictionaryRef)genericPasswordQuery,
(CFTypeRef *)&outDictionary);
if (keychainErr == noErr) {
// Convert the data dictionary into the format used by the view controller:
self.keychainData = [self secItemFormatToDictionary:(__bridge_transfer NSMutableDictionary *)outDictionary];
} else if (keychainErr == errSecItemNotFound) {
// Put default values into the keychain if no matching
// keychain item is found:
[self resetKeychainItem];
if (outDictionary) CFRelease(outDictionary);
} else {
// Any other error is unexpected.
NSAssert(NO, @"Serious error.\n");
if (outDictionary) CFRelease(outDictionary);
}
}
return self;
}
存到钥匙串:
- (void)mySetObject:(id)inObject forKey:(id)key
{
if (inObject == nil) return;
id currentObject = [keychainData objectForKey:key];
if (![currentObject isEqual:inObject])
{
[keychainData setObject:inObject forKey:key];
[self writeToKeychain];
}
}
从钥匙串中取:
- (id)myObjectForKey:(id)key
{
return [keychainData objectForKey:key];
}
// Reset the values in the keychain item, or create a new item if it
// doesn't already exist:
重置钥匙串中的数据，或者不存在是创建相应条目：
- (void)resetKeychainItem
{
if (!keychainData) //Allocate the keychainData dictionary if it doesn't exist yet.
{
self.keychainData = [[NSMutableDictionary alloc] init];
}
else if (keychainData)
{
// Format the data in the keychainData dictionary into the format needed for a query
// and put it into tmpDictionary:
NSMutableDictionary *tmpDictionary =
[self dictionaryToSecItemFormat:keychainData];
// Delete the keychain item in preparation for resetting the values:
OSStatus errorcode = SecItemDelete((__bridge CFDictionaryRef)tmpDictionary);
NSAssert(errorcode == noErr, @"Problem deleting current keychain item." );
}
// Default generic data for Keychain Item:
[keychainData setObject:@"" forKey:(__bridge id)kSecAttrLabel];
[keychainData setObject:@"" forKey:(__bridge id)kSecAttrDescription];
[keychainData setObject:@"" forKey:(__bridge id)kSecAttrAccount];
[keychainData setObject:@"" forKey:(__bridge id)kSecAttrService];
[keychainData setObject:@"" forKey:(__bridge id)kSecAttrComment];
[keychainData setObject:@"" forKey:(__bridge id)kSecValueData];
}
// Implement the dictionaryToSecItemFormat: method, which takes the attributes that
// you want to add to the keychain item and sets up a dictionary in the format
// needed by Keychain Services:
- (NSMutableDictionary *)dictionaryToSecItemFormat:(NSDictionary *)dictionaryToConvert
{
// This method must be called with a properly populated dictionary
// containing all the right key/value pairs for a keychain item search.
// Create the return dictionary:
NSMutableDictionary *returnDictionary =
[NSMutableDictionary dictionaryWithDictionary:dictionaryToConvert];
// Add the keychain item class and the generic attribute:
NSData *keychainItemID = [NSData dataWithBytes:kKeychainItemIdentifier
length:strlen((const char *)kKeychainItemIdentifier)];
[returnDictionary setObject:keychainItemID forKey:(__bridge id)kSecAttrGeneric];
[returnDictionary setObject:(__bridge id)kSecClassGenericPassword forKey:(__bridge id)kSecClass];
// Convert the password NSString to NSData to fit the API paradigm:
NSString *passwordString = [dictionaryToConvert objectForKey:(__bridge id)kSecValueData];
[returnDictionary setObject:[passwordString dataUsingEncoding:NSUTF8StringEncoding]
forKey:(__bridge id)kSecValueData];
return returnDictionary;
}
从钥匙串中取出数据转为字典
- (NSMutableDictionary *)secItemFormatToDictionary:(NSDictionary *)dictionaryToConvert
{
// This method must be called with a properly populated dictionary
// containing all the right key/value pairs for the keychain item.
// Create a return dictionary populated with the attributes:
NSMutableDictionary *returnDictionary = [NSMutableDictionary
dictionaryWithDictionary:dictionaryToConvert];
// To acquire the password data from the keychain item,
// first add the search key and class attribute required to obtain the password:
[returnDictionary setObject:(__bridge id)kCFBooleanTrue forKey:(__bridge id)kSecReturnData];
[returnDictionary setObject:(__bridge id)kSecClassGenericPassword forKey:(__bridge id)kSecClass];
// Then call Keychain Services to get the password:
CFDataRef passwordData = NULL;
OSStatus keychainError = noErr; //
keychainError = SecItemCopyMatching((__bridge CFDictionaryRef)returnDictionary,
(CFTypeRef *)&passwordData);
if (keychainError == noErr)
{
// Remove the kSecReturnData key; we don't need it anymore:
[returnDictionary removeObjectForKey:(__bridge id)kSecReturnData];
// Convert the password to an NSString and add it to the return dictionary:
NSString *password = [[NSString alloc] initWithBytes:[(__bridge_transfer NSData *)passwordData bytes]
length:[(__bridge NSData *)passwordData length] encoding:NSUTF8StringEncoding];
[returnDictionary setObject:password forKey:(__bridge id)kSecValueData];
}
// Don't do anything if nothing is found.
else if (keychainError == errSecItemNotFound) {
NSAssert(NO, @"Nothing was found in the keychain.\n");
if (passwordData) CFRelease(passwordData);
}
// Any other error is unexpected.
else
{
NSAssert(NO, @"Serious error.\n");
if (passwordData) CFRelease(passwordData);
}
return returnDictionary;
}
写到钥匙串的具体实现：
- (void)writeToKeychain
{
CFDictionaryRef attributes = nil;
NSMutableDictionary *updateItem = nil;
// If the keychain item already exists, modify it:
if (SecItemCopyMatching((__bridge CFDictionaryRef)genericPasswordQuery,
(CFTypeRef *)&attributes) == noErr)
{
// First, get the attributes returned from the keychain and add them to the
// dictionary that controls the update:
updateItem = [NSMutableDictionary dictionaryWithDictionary:(__bridge_transfer NSDictionary *)attributes];
// Second, get the class value from the generic password query dictionary and
// add it to the updateItem dictionary:
[updateItem setObject:[genericPasswordQuery objectForKey:(__bridge id)kSecClass]
forKey:(__bridge id)kSecClass];
// Finally, set up the dictionary that contains new values for the attributes:
NSMutableDictionary *tempCheck = [self dictionaryToSecItemFormat:keychainData];
//Remove the class--it's not a keychain attribute:
[tempCheck removeObjectForKey:(__bridge id)kSecClass];
// You can update only a single keychain item at a time.
OSStatus errorcode = SecItemUpdate(
(__bridge CFDictionaryRef)updateItem,
(__bridge CFDictionaryRef)tempCheck);
NSAssert(errorcode == noErr, @"Couldn't update the Keychain Item." );
} else {
// No previous item found; add the new item.
// The new value was added to the keychainData dictionary in the mySetObject routine,
// and the other values were added to the keychainData dictionary previously.
// No pointer to the newly-added items is needed, so pass NULL for the second parameter:
OSStatus errorcode = SecItemAdd(
(__bridge CFDictionaryRef)[self dictionaryToSecItemFormat:keychainData],
NULL);
NSAssert(errorcode == noErr, @"Couldn't add the Keychain Item." );
if (attributes) CFRelease(attributes);
}
}
@end
在这个示例中,通用属性是用来创建一个独一无二的字符串,可以用来轻松识别钥匙串条目。你也可以使用标准的属性,如服务名称和用户名。
运行调试：
详细代码和示例程序:https://github.com/lilufeng/KeychainDemo