vs code中配置"bits/stdc++"

简介：#include 就相当于引入了所有标准式函数库，即不用每次事先在cpp代码里输入:

#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 

mac上vs code中配置：

思路是在include目录中添加一个自己编写的”bits/stdc++.h”。

1. 终端输入gcc -v -E -x c++ -找到红框中的地址

2. 在访达中按组合键 shift+commond+G，在弹出的框中输入红框内容转到相应目录，创建一个bits文件夹

   /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/usr/include

3. 新建stdc++.h文件复制如下代码，想添加什么常用头文件在endif前添加即可

4. // C++ includes used for precompiling -*- C++ -*-
   
   // Copyright (C) 2003-2014 Free Software Foundation, Inc.
   //
   // This file is part of the GNU ISO C++ Library.  This library is free
   // software; you can redistribute it and/or modify it under the
   // terms of the GNU General Public License as published by the
   // Free Software Foundation; either version 3, or (at your option)
   // any later version.
   
   // This library is distributed in the hope that it will be useful,
   // but WITHOUT ANY WARRANTY; without even the implied warranty of
   // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   // GNU General Public License for more details.
   
   // Under Section 7 of GPL version 3, you are granted additional
   // permissions described in the GCC Runtime Library Exception, version
   // 3.1, as published by the Free Software Foundation.
   
   // You should have received a copy of the GNU General Public License and
   // a copy of the GCC Runtime Library Exception along with this program;
   // see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
   // .
   
   /** @file stdc++.h
    *  This is an implementation file for a precompiled header.
    */
   
   // 17.4.1.2 Headers
   
   // C
   #ifndef _GLIBCXX_NO_ASSERT
   #include 
   #endif
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   
   #if __cplusplus >= 201103L
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #endif
   
   // C++
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 
   #include 

c++ IntelliSense 插件 找不到include路径 解决方案：

将图一中红线部分填入c_cpp_properties.json文件中的includePath中即可。

注意： 路径最后添加 /**这表示递归添加这个路径下的所有的文件

原文地址：(https://mintlucas.github.io/2019/02/23/vscode配置'/)