redis搭建集群ERROR: Could not find a valid gem 'redis-3.0.0' (>= 0) in any repository

步骤:
1,下载redis。官网下载3.0.0版本,之前几的版本不支持集群模式
下载地址:http://download.redis.io/releases/redis-3.0.0.tar.gz

2:上传服务器,解压,编译

3:创建集群需要的目录并拷贝redis

4:修改配置文件redis.conf

5:启动6个redis

6,创建redis集群

cd /usr/local/redis3.0/src
./redis-trib.rb create --replicas 1 192.168.25.129:7001 192.168.25.129:7002 192.168.25.129:7003 192.168.25.129:7004 192.168.25.129:7005 192.168.25.129:7006


6.1执行上面的命令的时候会报错,因为是执行的的脚本,需要
错误内容:/usr/bin/env: ruby: No such file or directory
所以需要安装ruby的环境,这里推荐使用yum install ruby

yum install ruby

6.2然后再执行第步的创建集群命令,还会报错,提示缺少rubygems组件
错误内容:
./redis-trib.rb:24:in `require': no such file to load -- rubygems (LoadError)
from ./redis-trib.rb:24
yum install rubygems

6.3再次执行第步的命令,还会报错,提示不能加载redis,是因为缺少redis的接口
错误内容:
/usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- redis (LoadError)
from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require'
from ./redis-trib.rb:25

gem install redis
这里可能无法安装,因为无法连接gem服务器:
[@zw_22_90 src]# gem install redis --version 3.0.0  
ERROR:  Could not find a valid gem 'redis-3.0.0' (>= 0) in any repository
ERROR:  While executing gem ... (Gem::RemoteFetcher::FetchError)

安装redis过程中遇到题目中的问题解决如下:


需要手工下载并安装:
wget https://rubygems.global.ssl.fastly.net/gems/redis-3.2.1.gem
gem install -l ./redis-3.2.1.gem



6.4 再次执行第步的命令,正常执行
输入yes,然后配置完成。
[@zw_22_90 src]# ./redis-trib.rb  create --replicas 1 127.0.0.1:7000 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005
>>> Creating cluster
Connecting to node 127.0.0.1:7000: OK
Connecting to node 127.0.0.1:7001: OK
Connecting to node 127.0.0.1:7002: OK
Connecting to node 127.0.0.1:7003: OK
Connecting to node 127.0.0.1:7004: OK
Connecting to node 127.0.0.1:7005: OK
>>> Performing hash slots allocation on 6 nodes...
Using 3 masters:
127.0.0.1:7000
127.0.0.1:7001
127.0.0.1:7002
Adding replica 127.0.0.1:7003 to 127.0.0.1:7000
Adding replica 127.0.0.1:7004 to 127.0.0.1:7001
Adding replica 127.0.0.1:7005 to 127.0.0.1:7002
M: 2022f24d581b4a7c3342e3245c32927cbd5ec16d 127.0.0.1:7000
   slots:0-5460 (5461 slots) master
M: 37b7008f80f8c21a698da8cb1f1b32db8c0c415c 127.0.0.1:7001
   slots:5461-10922 (5462 slots) master
M: ac6dc5fa96e856b34c1ba4c3814394e4ebb698dd 127.0.0.1:7002
   slots:10923-16383 (5461 slots) master
S: b5b76d70bbb0dbf3e7df8a38f1259e95e2054721 127.0.0.1:7003
   replicates 2022f24d581b4a7c3342e3245c32927cbd5ec16d
S: 6881f8fef9c25da486f320ebf2ead39c1502db4c 127.0.0.1:7004
   replicates 37b7008f80f8c21a698da8cb1f1b32db8c0c415c
S: f090526d32cced97731eef2a2e1722a7bac7d9ea 127.0.0.1:7005
   replicates ac6dc5fa96e856b34c1ba4c3814394e4ebb698dd
Can I set the above configuration? (type 'yes' to accept): yes
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join...
>>> Performing Cluster Check (using node 127.0.0.1:7000)
M: 2022f24d581b4a7c3342e3245c32927cbd5ec16d 127.0.0.1:7000
   slots:0-5460 (5461 slots) master
M: 37b7008f80f8c21a698da8cb1f1b32db8c0c415c 127.0.0.1:7001
   slots:5461-10922 (5462 slots) master
M: ac6dc5fa96e856b34c1ba4c3814394e4ebb698dd 127.0.0.1:7002
   slots:10923-16383 (5461 slots) master
M: b5b76d70bbb0dbf3e7df8a38f1259e95e2054721 127.0.0.1:7003
   slots: (0 slots) master
   replicates 2022f24d581b4a7c3342e3245c32927cbd5ec16d
M: 6881f8fef9c25da486f320ebf2ead39c1502db4c 127.0.0.1:7004
   slots: (0 slots) master
   replicates 37b7008f80f8c21a698da8cb1f1b32db8c0c415c
M: f090526d32cced97731eef2a2e1722a7bac7d9ea 127.0.0.1:7005
   slots: (0 slots) master
   replicates ac6dc5fa96e856b34c1ba4c3814394e4ebb698dd
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.



至此redis集群即搭建成功!


7,redis-cli命令进入集群环境
[@zw_22_90 src]# redis-cli -c -p 7000
127.0.0.1:7000> quit;


需要注意的是,这个集群是在虚拟机上搭建的,如果在6台真实服务器上搭建集群,需要将这些服务器的防火墙关闭。


文章详细内容转载地址见:centos 安装 redis3.0.0 集群

你可能感兴趣的:(redis搭建集群ERROR: Could not find a valid gem 'redis-3.0.0' (>= 0) in any repository)