如何测试端口通不通(四种方法)

针对Linux系统:有1、2、3、4四种方法

针对Windows系统:有2、5两种通用方法

一般情况下使用"telnet ip port"判断端口通不通,其实测试方法不止这一种,还有很多种方法,下面小编给大家分享了几种方法,具体内容请往下看:

准备环境

启动一个web服务器,提供端口.

?
1
2
[wyq@localhost ~]$ python -m SimpleHTTPServer 8080
Serving HTTP on 0.0.0.0 port 8080 ...

用其它web服务器提供端口也一样,由于python比较方便,这里就用它

1、使用telnet判断

telnet是windows标准服务,可以直接用;如果是linux机器,需要安装telnet.

用法: telnet ip port

1)先用telnet连接不存在的端口

?
1
2
3
[root@localhost ~] # telnet 10.0.250.3 80
Trying 10.0.250.3...
telnet: connect to address 10.0.250.3: Connection refused #直接提示连接被拒绝

2)再连接存在的端口

?
1
2
3
4
5
6
7
8
[root@localhost ~] # telnet localhost 22
Trying ::1...
Connected to localhost. #看到Connected就连接成功了
Escape character is '^]' .
SSH-2.0-OpenSSH_5.3
a
Protocol mismatch.
Connection closed by foreign host.

2、使用ssh判断

ssh是linux的标准配置并且最常用,可以用来判断端口吗?

用法: ssh -v -p port username@ip

-v 调试模式(会打印日志).

-p 指定端口

username可以随意

1)连接不存在端口

?
1
2
3
4
5
6
7
8
9
[root@localhost ~] # ssh 10.0.250.3 -p 80
ssh : connect to host 10.0.250.3 port 80: Connection refused
[root@localhost ~] # ssh 10.0.250.3 -p 80 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.0.250.3 [10.0.250.3] port 80.
debug1: connect to address 10.0.250.3 port 80: Connection refused
ssh : connect to host 10.0.250.3 port 80: Connection refused

2)连接存在的端口

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[root@localhost ~] # ssh ... -p
a
^]
^C
[root@localhost ~] # ssh ... -p -v
OpenSSH_.p, OpenSSL ..e-fips Feb
debug: Reading configuration data /etc/ssh/ssh_config
debug: Applying options for *
debug: Connecting to ... [...] port .
debug: Connection established.
debug: permanently_set_uid: /
debug: identity file /root/ . ssh /identity type -
debug: identity file /root/ . ssh /identity-cert type -
debug: identity file /root/ . ssh /id_rsa type -
debug: identity file /root/ . ssh /id_rsa-cert type -
debug: identity file /root/ . ssh /id_dsa type -
debug: identity file /root/ . ssh /id_dsa-cert type -
a
^C

不用-v选项也可以咯

3、使用wget判断

wget是linux下的下载工具,需要先安装.

用法: wget ip:port

1)连接不存在的端口

?
1
2
3
[root@localhost ~] # wget ...:
---- ::-- http: // .../
Connecting to ...:... failed: Connection refused.

2)连接存在的端口

?
1
2
3
4
[root@localhost ~] # wget ...:
---- ::-- http: // ...:/
Connecting to ...:... connected.
HTTP request sent, awaiting response...

4、使用端口扫描工具

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
[root@localhost ~] # nmap ... -p
Starting Nmap . ( http: //nmap .org ) at -- : CST
Nmap scan report for ...
Host is up (.s latency).
PORT STATE SERVICE
/tcp closed http
MAC Address: B:A::CF:FD:D (Unknown)
Nmap done : IP address ( host up) scanned in . seconds
[root@localhost ~] # nmap ... -p
Starting Nmap . ( http: //nmap .org ) at -- : CST
Nmap scan report for ...
Host is up (.s latency).
PORT STATE SERVICE
/tcp open http-proxy
MAC Address: B:A::CF:FD:D (Unknown)
Nmap done : IP address ( host up) scanned in . seconds
[root@localhost ~] # nmap ...
Starting Nmap . ( http: //nmap .org ) at -- : CST
Nmap scan report for ...
Host is up (.s latency).
Not shown: closed ports
PORT STATE SERVICE
/tcp open ssh
/tcp open rpcbind
/tcp open http-proxy
/tcp open unknown
MAC Address: B:A::CF:FD:D (Unknown)
Nmap done : IP address ( host up) scanned in . seconds

5、使用专用工具tcping进行访问:

下载软件地址:https://elifulkerson.com/projects/tcping.php,如果无法下载可以从本人资源中下载


总结

提供端口服务,则使用了tcp协议,上面是以web服务器为例。如果服务器是更简单的tcp服务器,三个工具同样适用.

三个工具的共同点是:1.以tcp协议为基础;2.能访问指定端口. 遵循这两点可以找到很多工具.

一般在windows下使用tcping比较方便,linux下个人就比较喜欢用wget.

你可能感兴趣的:(Windows)