[CountryCode]
example : CountryCode= ( Default is empty)
remarks :
2 characters, like TW for Taiwan.
Please refer to ISO3166 code list for other countries and can be found at
http://www.iso.org/iso/prods-services/iso3166ma/02iso-3166-codelists/country_names_and_code_elements
[NetworkType]
example : NetworkType=Infra
value : Infra,Adhoc
Infra :infrastructure mode
Adhoc :adhoc mode
[WirelessMode]
example : WirelessMode=5
value : 0~15
remarks :
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only
3: legacy 11a/b/g mixed
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
11: 11N only in 5G band only
12: 11AC/A/AN/B/G/GN mixed (Only 11AC chipset support)
13: 11AC/A/AN/G/GN mixed (Only 11AC chipset support)
14: 11A/AN/AC mixed 5G band only (Only 11AC chipset support)
15: 11AC/AN mixed in 5G band (Only 11AC chipset support)
[CountryRegion]
description : Country region for WLAN radio 2.4G HZ regulation
example : CountryRegion=5
value : 0~7,31,32,33
remarks :
Region Channels
0 1-11
1 1-13
2 10-11
3 10-13
4 14
5 1-14
6 3-9
7 5-13
31 1-14
32 1-11 active scan, 12 and 13 passive scan
33 1-14 all active scan, 14 b mode only
[CountryRegionABand]
Description: Country region for WLAN radio 5G HZ regulation
example : CountryRegionABand=7
value : 0~11
remarks :
Region Channels
0 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
1 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
2 36, 40, 44, 48, 52, 56, 60, 64
3 52, 56, 60, 64, 149, 153, 157, 161
4 149, 153, 157, 161, 165
5 149, 153, 157, 161
6 36, 40, 44, 48
7 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
8 52, 56, 60, 64
9 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
10 36, 40, 44, 48, 149, 153, 157, 161, 165
11 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
[Channel]
example : Channel=0
remarks :
Depends on CountryRegion or CountryRegionForABand.
Default value = 0, the driver scan BSSID’s channel automatically
[SSID]
Description : The target BSSID string name
examples : SSID=DYX-AP
remarks : 0~z, 1~32 ASCII characters
[BeaconPeriod]
Description : Beacon period setting (It is SoftAP only)
example : BeaconPeriod=100
[TxPower]
Description: WLAN Radio Transmit Power setting in percentage
example : TxPower=100
Value : 0~100
[BGProtection]
Description: Enable/disable WLAN 11B or 11G protection
Value : 0 , 1
example : BGProtection=0
remarks :
0: disable
1: enable
[TxPreamble]
Description: Enable or disable Tx preamble
Value : 0 , 1
example : TxPreamble=0
remarks :
0: disable
1: enable
RTSThreshold]
Description: Set RTS Threshold
Value : 1~2347
example : RTSThreshold=2347
[FragThreshold]
Description: Set Fragment threshold
Value : 256~2346
example : FragThreshold=2346
[TxBurst]
Description: Enable or disable Tx burst
Value : 0 , 1
example : TxBurst=1
remarks :
0: disable
1: enable
[PktAggregate]
Description: Enable or disable Tx Aggregate
Value : 0 , 1
example : PktAggregate=0
remarks :
0: disable
1: enable
[WmmCapable]
Description: Enable or disable WMM QOS function
Value : 0 , 1
example : WmmCapable=1
remarks :
0: disable
1: enabl
[AckPolicy]
Description: Ack policy supports normal Ack or no Ack (AC_BK, AC_BE, AC_VI, AC_VO)
Value : 0,1
example : AckPolicy=0;0;0;0
remarks :
0: No ack
1: normal Ack
[AuthMode]
Description: WLAN security Authentication mode
Value : OPEN , SHARED , WEPAUTO , WPAPSK , WPA2PSK , WPA , WPA2
example : AuthMode=OPEN
remarks :
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA For enterprise mode (Need wpa_supplicant)
WPA2 For enterprise mode (Need wpa_supplicant)
[EncrypType]
Description: WLAN security Encryption type
Value : NONE , WEP , TKIP , AES
example : EncrypType=NONE
remarks :
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK
[WPAPSK]
Description: WLAN Security string for (TKIP/AES)
Value :
example : WPAPSK=
remarks :
8~63 ASCII
Or
64 HEX characters
[DefaultKeyID]
Description: Default key ID
Value : 1~4
example : DefaultKeyID=1
[Key1Type][Key2Type][Key3Type][Key4Type]
Description: Key 1 type
Value : 0 , 1
example : Key1Type=0
remarks :
0: Hexadecimal type
1: ASCII type
[Key1Str][Key2Str][Key3Str][Key4Str]
Description: Key 1 string
example : Key1Str=
remarks :
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)
[PSMode]
Description: WLAN Power Saving mode
Value : CAM , Max_PSP , Fast_PSP , Legacy_PSP
example : PSMode=CAM
remarks :
CAM Constantly Awake Mode
Max_PSP Max Power Saving
Fast_PSP Fast Power Saving
Legacy_PSP Legacy Power Saving
[AutoRoaming]
Description: Enable or disable WLAN driver auto roaming between APs.
Value : 0 , 1
example : AutoRoaming=0
remarks :
0: disable
1: enable
[RoamThreshold]
Description: WLAN Roaming RSSI threshold
example : RoamThreshold=70
[APSDCapable]
Description: Enable or disable APSD Capable support
Value:
APSDCapable=0
0: disable
1: enable
[APSDAC]
Description: Enable or disable APSD access control
Value:
APSDAC=0;0;0;0
0: disable
1: enable
[FixedTxMode]
Description: Fix Transmit mode
Value:
FixedTxMode=ofdm
CCK
OFDM
HT
[HT_RDG]
Description: Enable or disable HT Reverse Direction Grant
Value:
HT_RDG=1
0: disable
1: enable
[HT_EXTCHA]
Description: To locate the 40MHz channel in combination with the control
Value:
HT_EXTCHA=0
0: Below
1: Above
[HT_OpMode]
Description: HT operation mode
Value:
HT_OpMode=0
0: HT mixed mode
1: HT Greenfield mode
2.1.40 HT_MpduDensity
Description: Minimum separation of MPDUs in an A-MPDU
Value:
HT_MpduDensity=4
0~7
0: no restriction
1: 1/4 μs
2: 1/2 μs
3: 1 μs
4: 2 μs
5: 4 μs
6: 8 μs
7: 16 μs
[HT_BW]
Description: HT channel Bandwidth
Value:
HT_BW=1
0: 20 MHz
1: 40 MHz
2.1.42 HT_BADecline
Description: Enable or disable decline Block Ack to peer
Value:
HT_BADecline=0
0: disable
1: enable
[HT_AutoBA]
Description: Enable or disable auto build Block Ack section with peer
Value:
HT_AutoBA=1
0: disable
1: enable
[HT_AMSDU]
Description: Enable or disable AMSDU section
Value:
HT_AMSDU=0
0: disable
1: enable
[HT_BAWinSize]
Description: Block Ack window size
Value:
HT_BAWinSize=64
1~64
[HT_GI]
Description: HT Guard interval support
Value:
HT_GI=1
0: Long guard interval
1: short guard interval
[HT_MCS]
Description: WLAN Modulation and Coding Scheme (MCS)
Value:
HT_MCS=33
0 ~15, 32: Fix MCS rate for HT rate.
33: Auto Rate Adaption, recommended
[HT_MIMOPSMode]
Description: 802.11n SM power save mode
Value:
HT_MIMOPSMode=3
0: Static SM Power Save Mode
2: Reserved
1: Dynamic SM Power Save Mode
3: SM enabled
(not fully support yet)
[HT_DisallowTKIP]
Description: Enable or disable 11N rate with 11N AP when cipher is TKIP or WEP
Value:
HT_DisallowTKIP=1
0: disable
1: enable
[HT_STBC]
Description: Enable or disable HT STBC support
Value:
HT_STBC=0
0: disable
1: enable
[VHT_BW]
Description: VHT channel Bandwidth
Value:
VHT_BW=1
0: 20/40 MHz
1: 80 MHz
[IEEE80211H]
Description: Enable or disable IEEE 802.11h function. Spectrum management.
This field can only be enabled in A band.
Value:
IEEE80211H=0
0: disable
1: enable
[WirelessEvent]
Description: Enable or disable driver to send Linux Wireless event support.
Value:
WirelessEvent=0
0: disable
1: enable
[CarrierDetect]
Description: Enable or disable carrier detection
Value:
CarrierDetect=0
0: disable
1: enable
[AntDiversity]
Description: Enable or disable antenna diversity (only 1x1 support, please confirm HW first)
Value:
AntDiversity=0
0: disable
1: enable
[BeaconLostTime]
Description: Becon lost time = 4 seconds then disconnect with AP.
Value:
BeaconLostTime=4
1~60
[PSP_XLINK_MODE]
Description: Enable or disable XLINK mode
Value:
PSP_XLINK_MODE=0
0: disable
1: enable
[WscManufacturer]
Description: WPS manufacturer string
Value:
WscManufacturer=
Less than 64 characters
[WscModelName]
Description: WPS Mode name string
Value:
WscModelName=
Less than 32 characters
[WscDeviceName]
Description: WPS Device name string
Value:
WscDeviceName=
Less than 32 characters
[WscModelNumber]
Description: WPS Device model number string
Value:
WscModelNumber=
Less than 32 characters
[WscSerialNumber]
Description: WPS serial number string
Value:
WscSerialNumber=
Less than 32 characters
[RadioOn]
Description: Enable or disable RF
Value:
RadioOn=1
0: disable
1: enable
[Wsc4digitPinCode]
Description: WPS 4 digit pin code string
Value:
Wsc4digitPinCode=0
4 digit
[DetectPhy]
Description: Disable/Enable iNIC Phy link detection. if Phy link down will reset iNIC to load firmware.
Value:
DetectPhy=0
0: disable
1: enable
Note: only available on iNIC MT76XX FW v2.7.0.8 and after.
[Thermal]
Description: Disable/Enable iNIC thermal function
Value:
Thermal=0
0: disable
1: enable
Note:
Thermal function will be according to criteria with current temperature to configure Ant.
Criteria Value: 1~1000
default:80
Example:
iwpriv ra0 set tpc =80
Only available on iNIC MT76XX FW v2.7.0.8 and after
Syntax is iwpriv ra0 set [parameters]=[Value]
Note: Execute one iwpriv/set command at a time