supervisor 从安装到使用

(转)https://www.jianshu.com/p/3658c963d28b

一、安装

• 源码安装

先下载最新的supervisor安装包：https://pypi.python.org/pypi/supervisor ， 如：

cd /usr/local/src
wget https://pypi.python.org/packages/7b/17/88adf8cb25f80e2bc0d18e094fcd7ab300632ea00b601cbbbb84c2419eae/supervisor-3.3.2.tar.gz
tar -zxvf supervisor-3.3.2.tar.gz
cd supervisor-3.3.2
python setup.py install #本地python版本为python2.7
# python2.7 setup.py install #本地python版本为python3以上 

二、配置

1.生成配置文件

echo_supervisord_conf > /etc/supervisord.conf

2.启动

supervisord -c /etc/supervisord.conf

查看 supervisord 是否在运行：

ps aux | grep supervisord

3.配置

打开配置文件

vim /etc/supervisord.conf

在配置文件底部，配置include

[include]
files=/etc/supervisor/*.conf #若你本地无/etc/supervisor目录，请自建

用supervisor管理进程，配置如下：

cd /etc/supervisor
vim ossfs.conf # 这里的文件名称自定义

加入以下内容：

; 设置进程的名称，使用 supervisorctl 来管理进程时需要使用该进程名
[program:your_program_name] 
command=python server.py --port=9000
;numprocs=1                 ; 默认为1
;process_name=%(program_name)s   ; 默认为 %(program_name)s，即 [program:x] 中的 x
directory=/home/python/tornado_server ; 执行 command 之前，先切换到工作目录
user=oxygen                 ; 使用 oxygen 用户来启动该进程
; 程序崩溃时自动重启，重启次数是有限制的，默认为3次
autorestart=true            
redirect_stderr=true        ; 重定向输出的日志
stdout_logfile = /var/log/supervisord/tornado_server.log loglevel=info 

这里是启动要配置的参数，请根据自己的项目自定义添加

更改了supervisor配置文件，需要重启,运行以下指令：

supervisorctl reload

4.supervisorctl的用法

supervisord : 启动supervisor
supervisorctl reload :修改完配置文件后重新启动supervisor
supervisorctl status :查看supervisor监管的进程状态
supervisorctl start 进程名 ：启动XXX进程
supervisorctl stop 进程名 ：停止XXX进程
supervisorctl stop all：停止全部进程，注：start、restart、stop都不会载入最新的配置文件。
supervisorctl update：根据最新的配置文件，启动新配置或有改动的进程，配置没有改动的进程不会受影响而重启

5.若不使用控制台来管理进程，用浏览器来管理，该如何配置？

打开配置文件

vim /etc/supervisord.conf

配置 inet_http_server

[inet_http_server]       
port=127.0.0.1:9001     ; 服务器ip
username=xxx        ;自定义
password=xxx        ;自定义

三、设置开机启动

vim /etc/init.d/supervisord

添加以下脚本

#! /bin/sh
### BEGIN INIT INFO
# Provides:          supervisord
# Required-Start:    $remote_fs
# Required-Stop: $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Example initscript # Description: This file should be used to construct scripts to be # placed in /etc/init.d. ### END INIT INFO # Author: Dan MacKinlay  # Based on instructions by Bertrand Mathieu # http://zebert.blogspot.com/2009/05/installing-django-solr-varnish-and.html # Do NOT "set -e" # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/sbin:/usr/local/bin:/sbin:/usr/sbin:/bin:/usr/bin DESC="Description of the service" NAME=supervisord DAEMON=/usr/local/bin/supervisord DAEMON_ARGS=" -c /etc/supervisord.conf" #PIDFILE=/var/run/$NAME.pid PIDFILE=/tmp/$NAME.pid SCRIPTNAME=/etc/init.d/$NAME # Exit if the package is not installed [ -x "$DAEMON" ] || exit 0 # Read configuration variable file if it is present [ -r /etc/default/$NAME ] && . /etc/default/$NAME # Load the VERBOSE setting and other rcS variables . /lib/init/vars.sh # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that starts the daemon/service # do_start() { # Return # 0 if daemon has been started # 1 if daemon was already running # 2 if daemon could not be started start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ || return 1 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ $DAEMON_ARGS \ || return 2 # Add code here, if necessary, that waits for the process to be ready # to handle requests from services started subsequently which depend # on this one. As a last resort, sleep for some time. } # # Function that stops the daemon/service # do_stop() { # Return # 0 if daemon has been stopped # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks # and if the daemon is only ever run from this initscript. # If the above conditions are not satisfied then add some other code # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. rm -f $PIDFILE return "$RETVAL" } # # Function that sends a SIGHUP to the daemon/service # do_reload() { # # If the daemon can reload its configuration without # restarting (for example, when it is sent a SIGHUP), # then implement that here. # start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME return 0 } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" do_start case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" do_stop case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; #reload|force-reload) # # If do_reload() is not implemented then leave this commented out # and leave 'force-reload' as an alias for 'restart'. # #log_daemon_msg "Reloading $DESC" "$NAME" #do_reload #log_end_msg $? #;; restart|force-reload) # # If the "reload" option is implemented then remove the # 'force-reload' alias # log_daemon_msg "Restarting $DESC" "$NAME" do_stop case "$?" in 0|1) do_start case "$?" in 0) log_end_msg 0 ;; 1) log_end_msg 1 ;; # Old process is still running *) log_end_msg 1 ;; # Failed to start esac ;; *) # Failed to stop log_end_msg 1 ;; esac ;; *) #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2 exit 3 ;; esac : 

# 设置该脚本为可以执行
sudo chmod +x /etc/init.d/supervisord
# 设置为开机自动运行
sudo update-rc.d supervisord defaults
# 试一下，是否工作正常
service supervisord stop
service supervisord start

若报错：insserv: warning: script 'service' missing LSB tags and overrides，请执行:

sudo apt-get remove insserv

作者：童蒙_
链接：https://www.jianshu.com/p/3658c963d28b
來源：简书
简书著作权归作者所有，任何形式的转载都请联系作者获得授权并注明出处。

转载于:https://www.cnblogs.com/duandian/p/8967076.html