1、  Initial Local Controller Setup ：

 

Enter System name [Aruba5000]: Aruba-local01

Enter VLAN 1 interface IP address [172.16.0.254]: 172.16.0.253

Enter VLAN 1 interface subnet mask [255.255.255.0]: 255.255.255.0

Enter IP Default gateway [none]:

Enter Switch Role, (master|local) [master]: local

Enter Master switch IP address: 10.3.22.220

Enter Password for admin login (up to 32 chars): *****

Re-type Password for admin login: *****

Enter Password for enable mode (up to 15 chars): ******

Re-type Password for enable mode: ******

Do you wish to shutdown all the ports (yes|no)? [no]: no

 

Current choices are:

 

System name: Aruba-local01

VLAN 1 interface IP address: 172.16.0.253

VLAN 1 interface subnet mask: 255.255.255.0

IP Default gateway:

Switch Role: local

Master switch IP address: 10.3.22.220

Ports shutdown: no

 

If you accept the changes the switch will restart!

Type to go back and change answer for any question

Do you wish to accept the changes (yes|no)yes

Creating configuration... Done.

 

System will now restart!

 

2、  Core VLAN Configuration
(Aruba-local01)

User: admin

Log in to controller

 
Password: *****

(Aruba-local01) >enable

Password:******

(Aruba-local01) #configure terminal

Create VLAN 5 & assign an IP address

 
 
Enter Configuration commands, one per line. End with CNTL/Z

(Aruba-local01) (config) #vlan 5

 

(Aruba-local01) (config) #interface vlan 5

(Aruba-local01) (config-subif)#ip address 10.3.22.21 255.255.255.0

(Aruba-local01) (config-subif)#exit

(Aruba-local01) (config-if)#write m

Saving Configuration...

 

Saved Configuration

 

3 、 VLAN CONFIGRUATION

 

(Aruba-local01) #configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

(Aruba-local01) (config-range) # show vlan

Check port assignments

 

 


 
VLAN CONFIGURATION

------------------

VLAN  Name       Ports

----  ----       -----

1     Default    Fa2/0-23 Gig2/24 Gig2/25

5     VLAN0005

Assign all Fast Ethernet and Gigabit Ethernet ports to VLAN 5

 
(Aruba-local01) (config) #interface range fastethernet 2/0-23

(Aruba-local01) (config-range) # switchport access vlan 5

(Aruba-local01) (config-range) # exit

(Aruba-local01) (config) #interface range gigabitethernet 2/24-25

(Aruba-local01) (config-if)#switchport access vlan 5

(Aruba-local01) (config-range) # show vlan

VLAN CONFIGURATION

------------------

Double-check assignments & save configuration

 
VLAN  Name       Ports

----  ----       -----

1     Default

5     VLAN0005   Fa2/0-23 Gig2/24 Gig2/25

(Aruba-local01) (config-if)#write m

Saving Configuration...

 

Saved Configuration

 

4 、

Saved Configuration

Saving Configuration...

(Aruba-local01) (config-if)#write m

(Aruba-local01) (config-if)#switchport trunk native vlan 5

(Aruba-local01) (config-if)#switchport trunk allowed vlan all

(Aruba-local01) (config-if)#switchport mode trunk

(Aruba-local01) (config) #interface fastethernet 2/0

Enter Configuration commands, one per line. End with CNTL/Z

(Aruba-local01) #configure terminal

5 、

 

(Aruba-local01) #configure terminal

Enter Configuration commands, one per line. End with CNTL/Z

Assign default gateway

 
(Aruba-local01) (config) #ip default-gateway 10.3.22.1

(Aruba-local01) (config-if)#write m

Saving Configuration...

 

Saved Configuration

 

6 、