【Ansys Maxwell 学习笔记】Generating the Model with the PExprt Modeling Module Ⅱ

上一篇博文地址如下：

https://www.cnblogs.com/Mr-Wangblogs/p/13131987.html

Step11：Generate the Model 输出模型

输出FEA Based Modeler 2D模型：

• Select Modeler/FEA Based Modeler (2D)/Start Model Generation menu item or press in the Toolbar. A warning message about the parallel connection of windings is shown

  选择"基于Modeler /基于FEA的Modeler（2D）/开始模型生成"菜单项，或在工具栏中按。 显示有关绕组并联的警告消息

  

• Click OK to dismiss the window. The UPM FEA Modeler window appears. The window says that Magnetic Analysis and Electric Analysis will be done using Maxwell 2D and a Curve Fitting will be run at the end of the modeling process.

  单击确定以关闭该窗口。 出现" UPM FEA Modeler"窗口。 窗口显示将使用Maxwell 2D进行磁分析和电分析，并在建模过程结束时运行曲线拟合。

  

• Click Start to start the modeling process. The process takes approximately 20 minutes to complete. Once the FEA-based model generation procedure is finished, a message appears, telling you that the parameter extraction is completed.

  单击开始以开始建模过程。 该过程大约需要20分钟才能完成。 基于FEA的模型生成过程完成后，将出现一条消息，告诉您参数提取已完成。

• Click OK to dismiss this message. A message appears, telling you the path to the 2D model netlist.

  单击确定以消除此消息。 出现一条消息，告诉您2D模型网表的路径。

• Click OK to dismiss this message. The UPM MGen window appears.

  单击确定以消除此消息。 出现" UPM MGen"窗口。

输出结构如下图所示

Z1_1

Z1_2

Z1_3

Z1_4

Z1_5

Z1_6

Z2_2

Z2_3

Z2_4

Z2_5

Z2_6

Z3_3

Z3_4

Z3_5

Z3_6

Z4_4

Z4_5

Z4_6

Z5_5

Z5_6

Z6_6

   

• Click Exit in the UPM MGen window to close it.
• Click Exit to close the UPM FEA Modeler window.

Step12：Explore the Results输出结果

Choose the Results/FEA Based (2D)/FEA Based Results menu item

   

Capacitive Effects:

AC Resistance 信息，通过选择不同的绕组中的交流绕组信息。

选中Show DC resistance 可以查看直流电阻信息

各绕组的直流电阻和电感信息

不同绕组的漏感信息