LaTex中文article模板(支持代码、数学、TikZ)

代码

请使用XeLatex编译

main.tex

\documentclass{article}
\usepackage{ctex}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 页面设置
\usepackage{geometry}
\geometry{a4paper,scale=0.8}
%\usepackage{fontspec}
%\setmonofont{Consolas}
\usepackage{chngpage}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 表格
\usepackage{diagbox}
% 超链接
\usepackage{hyperref}
\hypersetup{hidelinks}
% 图片
\usepackage{graphicx}
\usepackage{subfigure} % \subfigure[]{}
\usepackage{caption} % \caption*{}
% 浮动
\usepackage{float} % [H]
% 列表
\usepackage{enumerate}
% pandoc markdown转latex
\newcommand{\tightlist}{\setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
\usepackage{longtable}
\usepackage{booktabs}% \toprule, \midrule, \bottomrule

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 数学
\usepackage{mathrsfs} % \mathscr
\usepackage{amssymb,amsfonts,amsmath,amsthm,mathtools}
\usepackage{xcolor}
\usepackage{mdframed}

\mdfdefinestyle{shadeStyle}{backgroundcolor=gray!10,linewidth=0pt,innerleftmargin=1ex,innertopmargin=-0.5ex}

\theoremstyle{plain}
\newmdtheoremenv[style=shadeStyle]{theorem}{定理}[section]
\newmdtheoremenv[style=shadeStyle]{lemma}[theorem]{引理}
\newmdtheoremenv[style=shadeStyle]{proposition}[theorem]{命题}
\newmdtheoremenv[style=shadeStyle]{corollary}[theorem]{推论}

\theoremstyle{definition}
\newtheorem{definition}[theorem]{定义}
\newtheorem{exercise}[theorem]{习题}
\newtheorem{question}[theorem]{问题}
\newtheorem{example}[theorem]{例}

\theoremstyle{remark}
\newtheorem{remark}[theorem]{注}
\newtheorem{notation}[theorem]{记号}
\newtheorem{summary}[theorem]{总结}

\swapnumbers
\newcommand{\nameOfIt}{}
% customized theorem
\theoremstyle{plain}
\newmdtheoremenv[style=shadeStyle]{custhm}[theorem]{\nameOfIt}
\newenvironment{mytheorem}[1]{\renewcommand{\nameOfIt}{#1}\begin{custhm}}{\end{custhm}}
% customized definition
\theoremstyle{definition}
\newtheorem{cusdef}[theorem]{\nameOfIt}
\newenvironment{mydefinition}[1]{\renewcommand{\nameOfIt}{#1}\begin{cusdef}}{\end{cusdef}}
% customized remark
\theoremstyle{remark}
\newtheorem{cusrmk}[theorem]{\nameOfIt}
\newenvironment{myremark}[1]{\renewcommand{\nameOfIt}{#1}\begin{cusrmk}}{\end{cusrmk}}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 代码
\usepackage{listings}
%\usepackage{xcolor}

\lstset{
	%language=Octave,
	numbers=left,
	numberstyle=\small,
	stepnumber=1,	% the step between two line-numbers. If it's 1, each line will be numbered
  	numbersep=5pt,	% how far the line-numbers are from the code
  	backgroundcolor=\color{white},	% You must add \usepackage{color}
  	showspaces=false,	% show spaces adding particular underscores
  	showstringspaces=false,	% underline spaces within strings
  	showtabs=false,	% show tabs within strings adding particular underscores
  	frame=shadowbox,	% single / shadowbox
  	%rulecolor=\color{black},	% if not set, the frame-color may be changed on line-breaks within not-black text (e.g. commens (green here))
  	rulesepcolor=\color{red!20!green!20!blue!20},
  	tabsize=2,	% sets default tabsize to 2 spaces
  	captionpos=b,	% sets the caption-position to bottom
  	breaklines=true,	% sets automatic line breaking
  	breakatwhitespace=false,	% sets if automatic breaks should only happen at whitespace
  	title=\lstname,	% show the filename of files included with \lstinputlisting; also try caption instead of title
	basicstyle=\ttfamily,
  	%keywordstyle=\color{red},
  	commentstyle=\color{grey},
  	%stringstyle=\color{mauve},
  	escapeinside={\%*}{*)},	% if you want to add LaTeX within your code
  	morekeywords={*,...}	% if you want to add more keywords to the set
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% 算法/伪代码
\usepackage{algorithm}
\usepackage{algorithmicx}
\usepackage{algpseudocode}

\floatname{algorithm}{算法}
\renewcommand{\algorithmicrequire}{\textbf{输入:}}
\renewcommand{\algorithmicensure}{\textbf{输出:}}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%TikZ
\usepackage{tikz}
\usepackage{mathdots}
\usepackage{yhmath}
\usepackage{cancel}
\usepackage{color}
\usepackage{siunitx}
\usepackage{array}
\usepackage{multirow}
%\usepackage{gensymb}
\usepackage{tabularx}
\usetikzlibrary{fadings}
\usetikzlibrary{patterns}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\title{中文article模板}
\author{maoruimas}
%\date{}
\setlength{\parindent}{0pt} % 首行不缩进

\begin{document}

\maketitle
% 正文
\input{body}

\end{document}

body.tex

请使用XeLaTeX编译. 推荐\url{https://www.overleaf.com/}.

\section{表格}
\begin{table}[H]
\centering
\begin{tabular}{c|ccccccc}
\diagbox[height=2em]{$p$}{$k$} & 0 & 1 & 2 & 3 & 4 \\
\hline
0 & 1	& 0	& 0	& 0	& 0	\\
1 & 0	& 1	& 0	& 0	& 0	\\
2 & 0	& 1	& 1	& 0	& 0	\\
3 & 0	& 2	& 3	& 1	& 0	\\
4 & 0	& 6	& 11	& 6	& 1	\\
\end{tabular}
\caption*{斯特林数$s(p,k)$}
\end{table}

\section{多图并列}
\begin{figure}[H]
    \centering
    \subfigure{
        \begin{minipage}[t]{0.3\linewidth}
        \centering
        \includegraphics[width=\linewidth]{y-x.png}
        \caption*{$y=\dfrac {\kappa \left( 0\right) }{2}x^{2}$}
        \end{minipage}
    }
    \subfigure{
        \begin{minipage}[t]{0.3\linewidth}
        \centering
        \includegraphics[width=\linewidth]{z-x.png}
        \caption*{$z=\dfrac {\kappa \left( 0\right) \tau \left( 0\right) }{6}x^{3}$}
        \end{minipage}
    }
    \subfigure{
        \begin{minipage}[t]{0.3\linewidth}
        \centering
        \includegraphics[width=\linewidth]{z-y.png}
        \caption*{$z^{2}=\dfrac {2}{9}\dfrac {\tau ^{2}\left( 0\right) }{\kappa \left( 0\right) }y^{3}$}
        \end{minipage}
    }
\end{figure}

\section{数学}
\begin{definition}
设$\mathbb{I}_{K}$是整体域$K$的Idele群, 定义$K$的\textbf{1-Idele群}为$\mathbb{I}^{1}_{K} = \{x\in \mathbb{I}_{K}||x|=1\}$.
\end{definition}
\begin{theorem}\label{ik}
$K^{\times }$在$\mathbb{I}^{1}_{K}$中离散, 且$\mathbb{I}^{1}_{K} /K^{\times }$紧.
\end{theorem}
\begin{remark}
$\mathbb{I}_{K} /K^{\times }$不一定紧.
\end{remark}
\begin{mytheorem}{良序基本定理}[自定义定理格式]
任意良序集与某个序数同构.
\end{mytheorem}
\begin{proof}[定理\ref{ik}的证明]
blabla.
\end{proof}

\section{代码}
\begin{lstlisting}[language={C++}]
int powmod(int a, int b, int m) {
    int res = 1;
    while (b > 0) {
        if (b & 1) {
            res = (res * a) % m;
        }
        a = (a * a) % m;
        b >>= 1;
    }
    return res;
}
\end{lstlisting}

\section{算法}
\begin{algorithm}
\caption{示例}
\begin{algorithmic}[1] %行号
\Function {MergerSort}{$Array, left, right$}
\State $result \gets 0$
\If {$left < right$}
\State $middle \gets (left + right) / 2$
\State $result \gets result +$ \Call{MergerSort}{$Array, left, middle$}
\State $result \gets result +$ \Call{MergerSort}{$Array, middle, right$}
\State $result \gets result +$ \Call{Merger}{$Array,left,middle,right$}
\EndIf
\State \Return{$result$}
\EndFunction
\end{algorithmic}
\end{algorithm}

\section{TikZ}
推荐使用\url{https://www.mathcha.io}绘图.
\tikzset{every picture/.style={line width=0.75pt}} %set default line width to 0.75pt        
\begin{center}
\begin{tikzpicture}[x=0.75pt,y=0.75pt,yscale=-1,xscale=1]
\draw  [draw opacity=0][dash pattern={on 4.5pt off 4.5pt}] (250,159.56) .. controls (250,159.52) and (250,159.49) .. (250,159.46) .. controls (250,148.71) and (292.53,140) .. (345,140) .. controls (397.47,140) and (440,148.71) .. (440,159.46) .. controls (440,159.5) and (440,159.53) .. (440,159.57) -- (345,159.46) -- cycle ; \draw  [color={rgb, 255:red, 0; green, 0; blue, 0 }  ,draw opacity=1 ][dash pattern={on 4.5pt off 4.5pt}] (250,159.56) .. controls (250,159.52) and (250,159.49) .. (250,159.46) .. controls (250,148.71) and (292.53,140) .. (345,140) .. controls (397.47,140) and (440,148.71) .. (440,159.46) .. controls (440,159.5) and (440,159.53) .. (440,159.57) ;
\draw  [draw opacity=0] (440,159.36) .. controls (440,159.39) and (440,159.42) .. (440,159.46) .. controls (440,170.2) and (397.47,178.91) .. (345,178.91) .. controls (292.53,178.91) and (250,170.2) .. (250,159.46) .. controls (250,159.42) and (250,159.38) .. (250,159.34) -- (345,159.46) -- cycle ; \draw  [color={rgb, 255:red, 0; green, 0; blue, 0 }  ,draw opacity=1 ] (440,159.36) .. controls (440,159.39) and (440,159.42) .. (440,159.46) .. controls (440,170.2) and (397.47,178.91) .. (345,178.91) .. controls (292.53,178.91) and (250,170.2) .. (250,159.46) .. controls (250,159.42) and (250,159.38) .. (250,159.34) ;
\draw  [draw opacity=0][dash pattern={on 4.5pt off 4.5pt}] (256.4,189.71) .. controls (252.35,179.27) and (250.09,167.94) .. (250,156.09) -- (345,155.36) -- cycle ; \draw  [dash pattern={on 4.5pt off 4.5pt}] (256.4,189.71) .. controls (252.35,179.27) and (250.09,167.94) .. (250,156.09) ;
\draw  [draw opacity=0] (250.11,160.04) .. controls (250.04,158.49) and (250,156.93) .. (250,155.36) .. controls (250,102.9) and (292.53,60.36) .. (345,60.36) .. controls (397.47,60.36) and (440,102.9) .. (440,155.36) .. controls (440,157.58) and (439.92,159.78) .. (439.77,161.96) -- (345,155.36) -- cycle ; \draw   (250.11,160.04) .. controls (250.04,158.49) and (250,156.93) .. (250,155.36) .. controls (250,102.9) and (292.53,60.36) .. (345,60.36) .. controls (397.47,60.36) and (440,102.9) .. (440,155.36) .. controls (440,157.58) and (439.92,159.78) .. (439.77,161.96) ;
\draw  [draw opacity=0] (433.56,189.39) .. controls (419.82,224.94) and (385.31,250.15) .. (344.92,250.15) .. controls (304.64,250.15) and (270.22,225.09) .. (256.4,189.71) -- (344.92,155.15) -- cycle ; \draw   (433.56,189.39) .. controls (419.82,224.94) and (385.31,250.15) .. (344.92,250.15) .. controls (304.64,250.15) and (270.22,225.09) .. (256.4,189.71) ;
\draw  [draw opacity=0][dash pattern={on 4.5pt off 4.5pt}] (440,156.03) .. controls (439.92,167.62) and (437.76,178.72) .. (433.88,188.97) -- (345,155.36) -- cycle ; \draw  [dash pattern={on 4.5pt off 4.5pt}] (440,156.03) .. controls (439.92,167.62) and (437.76,178.72) .. (433.88,188.97) ;
\draw    (247,130) -- (100,190) -- (443,190) -- (590,130) -- (437,130.67) ;
\draw    (247,130) -- (253.67,130.67) ;
\draw  [dash pattern={on 4.5pt off 4.5pt}]  (253.67,130.67) -- (437,130.67) ;
\draw  [dash pattern={on 4.5pt off 4.5pt}]  (345,60) -- (400.33,104.67) ;
\draw    (400.33,104.67) -- (470,160) ;
\draw  [draw opacity=0][fill={rgb, 255:red, 0; green, 0; blue, 0 }  ,fill opacity=1 ] (467.5,160) .. controls (467.5,158.62) and (468.62,157.5) .. (470,157.5) .. controls (471.38,157.5) and (472.5,158.62) .. (472.5,160) .. controls (472.5,161.38) and (471.38,162.5) .. (470,162.5) .. controls (468.62,162.5) and (467.5,161.38) .. (467.5,160) -- cycle ;
\draw  [draw opacity=0][fill={rgb, 255:red, 0; green, 0; blue, 0 }  ,fill opacity=1 ] (342.5,159.46) .. controls (342.5,158.08) and (343.62,156.96) .. (345,156.96) .. controls (346.38,156.96) and (347.5,158.08) .. (347.5,159.46) .. controls (347.5,160.84) and (346.38,161.96) .. (345,161.96) .. controls (343.62,161.96) and (342.5,160.84) .. (342.5,159.46) -- cycle ;
\draw (419,72.4) node [anchor=north west][inner sep=0.75pt]    {$S^{n}$};
\draw (162.14,166.97) node [anchor=north west][inner sep=0.75pt]    {$\mathbb{R}^{n}$};
\draw (351.71,151.97) node [anchor=north west][inner sep=0.75pt]    {$0$};
\draw (348,41.69) node [anchor=north west][inner sep=0.75pt]    {$1$};
\draw (383.14,98.83) node [anchor=north west][inner sep=0.75pt]    {$x$};
\draw (476.86,149.11) node [anchor=north west][inner sep=0.75pt]    {$y$};
\draw [fill={rgb, 255:red, 0; green, 0; blue, 0 }  ,fill opacity=1 ]  (345.45, 60.37) circle [x radius= 2, y radius= 2]   ;
\draw [fill={rgb, 255:red, 0; green, 0; blue, 0 }  ,fill opacity=1 ]  (400.33, 104.67) circle [x radius= 2, y radius= 2]   ;
\end{tikzpicture}
\end{center}

效果

LaTex中文article模板(支持代码、数学、TikZ)_第1张图片
LaTex中文article模板(支持代码、数学、TikZ)_第2张图片
LaTex中文article模板(支持代码、数学、TikZ)_第3张图片

你可能感兴趣的:(LaTex中文article模板(支持代码、数学、TikZ))