在编写代码之前,我们需要定义可信和不可信的函数,我们首先建立一个文件夹,在文件夹中为了编译方便(仿照上一节的makefile写我们自己的makefie)也仿照sdk给的例子中的文件夹布局建立新的文件夹文件夹的布局如下:
其中后缀为xml,lds,pem的文件,直接从SDK中SampleEnclave中拷贝即可(在所有的案例中,xml,lds的内容一样,但是名称不一样,也可以自己更该,但是makefile也要更改,pem可以自己生成也可以使用已经存在的pem)一下文件都是参照SampleEnclave中的代码来实现的
首先配置edl文件
我们实现将hello world在enclave中替换成hello enclave!
edl的代码如下:
enclave
{
trusted{
public void dck_test([in,out,size=len] char *buf,size_t len); //in或者out的修饰是必不可少的,否则无法正常读出以及写入
};
untrusted{
};
};
之后编写enclave的实现,SGX中是通过enclave.cpp
enclave.cpp的内容如下:
#include "enclave_t.h" //包括edl的同名的_t.h文件
#include "sgx_trts.h" //包括可信的头文件
#include
void dck_test(char *buf,size_t len) //拷贝函数
{
const char *secret="Hello Enclave!";
if(len>=0)
{
memcpy(buf,secret,strlen(secret)+1);
}
}
之后是函数的主体也就是test.cpp,首先先看依稀test.h
/*
* Copyright (C) 2011-2017 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef _APP_H_
#define _APP_H_
#include
#include
#include
#include
#include "sgx_error.h" /* sgx_status_t */
#include "sgx_eid.h" /* sgx_enclave_id_t */
#ifndef TRUE
# define TRUE 1
#endif
#ifndef FALSE
# define FALSE 0
#endif
# define TOKEN_FILENAME "enclave.token"
# define ENCLAVE_FILENAME "enclave.signed.so"
extern sgx_enclave_id_t global_eid; /* global enclave id */
#if defined(__cplusplus)
extern "C" {
#endif
#if defined(__cplusplus)
}
#endif
#endif /* !_APP_H_ */
之后定义相关的test.cpp
#include
#include
#include
# include
# include
# define LEN 100 //自己添加的
# define MAX_PATH FILENAME_MAX //这个定义在test.h
#include "sgx_urts.h"
#include "enclave_u.h"
#include "test.h"
/* Global EID shared by multiple threads */
sgx_enclave_id_t global_eid = 0; //enclave的ID
typedef struct _sgx_errlist_t {
sgx_status_t err;
const char *msg;
const char *sug; /* Suggestion */
} sgx_errlist_t;
/* Error code returned by sgx_create_enclave */
static sgx_errlist_t sgx_errlist[] = {
{
SGX_ERROR_UNEXPECTED,
"Unexpected error occurred.",
NULL
},
{
SGX_ERROR_INVALID_PARAMETER,
"Invalid parameter.",
NULL
},
{
SGX_ERROR_OUT_OF_MEMORY,
"Out of memory.",
NULL
},
{
SGX_ERROR_ENCLAVE_LOST,
"Power transition occurred.",
"Please refer to the sample \"PowerTransition\" for details."
},
{
SGX_ERROR_INVALID_ENCLAVE,
"Invalid enclave image.",
NULL
},
{
SGX_ERROR_INVALID_ENCLAVE_ID,
"Invalid enclave identification.",
NULL
},
{
SGX_ERROR_INVALID_SIGNATURE,
"Invalid enclave signature.",
NULL
},
{
SGX_ERROR_OUT_OF_EPC,
"Out of EPC memory.",
NULL
},
{
SGX_ERROR_NO_DEVICE,
"Invalid SGX device.",
"Please make sure SGX module is enabled in the BIOS, and install SGX driver afterwards."
},
{
SGX_ERROR_MEMORY_MAP_CONFLICT,
"Memory map conflicted.",
NULL
},
{
SGX_ERROR_INVALID_METADATA,
"Invalid enclave metadata.",
NULL
},
{
SGX_ERROR_DEVICE_BUSY,
"SGX device was busy.",
NULL
},
{
SGX_ERROR_INVALID_VERSION,
"Enclave version was invalid.",
NULL
},
{
SGX_ERROR_INVALID_ATTRIBUTE,
"Enclave was not authorized.",
NULL
},
{
SGX_ERROR_ENCLAVE_FILE_ACCESS,
"Can't open enclave file.",
NULL
},
};
/* Check error conditions for loading enclave */
void print_error_message(sgx_status_t ret)
{
size_t idx = 0;
size_t ttl = sizeof sgx_errlist/sizeof sgx_errlist[0];
for (idx = 0; idx < ttl; idx++) {
if(ret == sgx_errlist[idx].err) {
if(NULL != sgx_errlist[idx].sug)
printf("Info: %s\n", sgx_errlist[idx].sug);
printf("Error: %s\n", sgx_errlist[idx].msg);
break;
}
}
if (idx == ttl)
printf("Error: Unexpected error occurred.\n");
}
/* Initialize the enclave:
* Step 1: try to retrieve the launch token saved by last transaction
* Step 2: call sgx_create_enclave to initialize an enclave instance
* Step 3: save the launch token if it is updated
*/
int initialize_enclave(void)
{
char token_path[MAX_PATH] = {'\0'};
sgx_launch_token_t token = {0};
sgx_status_t ret = SGX_ERROR_UNEXPECTED;
int updated = 0;
/* Step 1: try to retrieve the launch token saved by last transaction
* if there is no token, then create a new one.
*/
/* try to get the token saved in $HOME */
const char *home_dir = getpwuid(getuid())->pw_dir;
if (home_dir != NULL &&
(strlen(home_dir)+strlen("/")+sizeof(TOKEN_FILENAME)+1) <= MAX_PATH) {
/* compose the token path */
strncpy(token_path, home_dir, strlen(home_dir));
strncat(token_path, "/", strlen("/"));
strncat(token_path, TOKEN_FILENAME, sizeof(TOKEN_FILENAME)+1);
} else {
/* if token path is too long or $HOME is NULL */
strncpy(token_path, TOKEN_FILENAME, sizeof(TOKEN_FILENAME));
}
FILE *fp = fopen(token_path, "rb");
if (fp == NULL && (fp = fopen(token_path, "wb")) == NULL) {
printf("Warning: Failed to create/open the launch token file \"%s\".\n", token_path);
}
if (fp != NULL) {
/* read the token from saved file */
size_t read_num = fread(token, 1, sizeof(sgx_launch_token_t), fp);
if (read_num != 0 && read_num != sizeof(sgx_launch_token_t)) {
/* if token is invalid, clear the buffer */
memset(&token, 0x0, sizeof(sgx_launch_token_t));
printf("Warning: Invalid launch token read from \"%s\".\n", token_path);
}
}
/* Step 2: call sgx_create_enclave to initialize an enclave instance */
/* Debug Support: set 2nd parameter to 1 */
ret = sgx_create_enclave(ENCLAVE_FILENAME, SGX_DEBUG_FLAG, &token, &updated, &global_eid, NULL);
if (ret != SGX_SUCCESS) {
print_error_message(ret);
if (fp != NULL) fclose(fp);
return -1;
}
/* Step 3: save the launch token if it is updated */
if (updated == FALSE || fp == NULL) {
/* if the token is not updated, or file handler is invalid, do not perform saving */
if (fp != NULL) fclose(fp);
return 0;
}
/* reopen the file with write capablity */
fp = freopen(token_path, "wb", fp);
if (fp == NULL) return 0;
size_t write_num = fwrite(token, 1, sizeof(sgx_launch_token_t), fp);
if (write_num != sizeof(sgx_launch_token_t))
printf("Warning: Failed to save launch token to \"%s\".\n", token_path);
fclose(fp);
return 0;
}
//以上内容都是必须的,都不需要更该
/* Application entry */
int SGX_CDECL main(int argc, char *argv[])
{
(void)(argc);
(void)(argv);
char buffer[LEN]= "Hello world!";
/* Initialize the enclave */
if(initialize_enclave() < 0){
printf("Enter a character before exit ...\n");
getchar();
return -1;
}
dck_test(global_eid,buffer,LEN); //调用函数,一定要使用enclave的id
printf("%s",buffer);
/* Destroy the enclave */
sgx_destroy_enclave(global_eid);
return 0;
}
下面就是重点的makefile了
######## SGX SDK Settings ########不用更改
SGX_SDK ?= /opt/intel/sgxsdk
SGX_MODE ?= HW
SGX_ARCH ?= x64
SGX_DEBUG ?= 1
ifeq ($(shell getconf LONG_BIT), 32)
SGX_ARCH := x86
else ifeq ($(findstring -m32, $(CXXFLAGS)), -m32)
SGX_ARCH := x86
endif
ifeq ($(SGX_ARCH), x86)
SGX_COMMON_CFLAGS := -m32
SGX_LIBRARY_PATH := $(SGX_SDK)/lib
SGX_ENCLAVE_SIGNER := $(SGX_SDK)/bin/x86/sgx_sign
SGX_EDGER8R := $(SGX_SDK)/bin/x86/sgx_edger8r
else
SGX_COMMON_CFLAGS := -m64
SGX_LIBRARY_PATH := $(SGX_SDK)/lib64
SGX_ENCLAVE_SIGNER := $(SGX_SDK)/bin/x64/sgx_sign
SGX_EDGER8R := $(SGX_SDK)/bin/x64/sgx_edger8r
endif
ifeq ($(SGX_DEBUG), 1)
ifeq ($(SGX_PRERELEASE), 1)
$(error Cannot set SGX_DEBUG and SGX_PRERELEASE at the same time!!)
endif
endif
ifeq ($(SGX_DEBUG), 1)
SGX_COMMON_CFLAGS += -O0 -g
else
SGX_COMMON_CFLAGS += -O2
endif
######## App Settings ########
ifneq ($(SGX_MODE), HW)
Urts_Library_Name := sgx_urts_sim
else
Urts_Library_Name := sgx_urts
endif
App_Cpp_Files := App/test.cpp $(wildcard App/Edger8rSyntax/*.cpp) $(wildcard App/TrustedLibrary/*.cpp)
#上述App/。。。更改成我们自己的cpp名称其他的不做更改
App_Include_Paths := -IInclude -IApp -I$(SGX_SDK)/include
App_C_Flags := $(SGX_COMMON_CFLAGS) -fPIC -Wno-attributes $(App_Include_Paths)
# Three configuration modes - Debug, prerelease, release
# Debug - Macro DEBUG enabled.
# Prerelease - Macro NDEBUG and EDEBUG enabled.
# Release - Macro NDEBUG enabled.
ifeq ($(SGX_DEBUG), 1)
App_C_Flags += -DDEBUG -UNDEBUG -UEDEBUG
else ifeq ($(SGX_PRERELEASE), 1)
App_C_Flags += -DNDEBUG -DEDEBUG -UDEBUG
else
App_C_Flags += -DNDEBUG -UEDEBUG -UDEBUG
endif
App_Cpp_Flags := $(App_C_Flags) -std=c++11
App_Link_Flags := $(SGX_COMMON_CFLAGS) -L$(SGX_LIBRARY_PATH) -l$(Urts_Library_Name) -lpthread
ifneq ($(SGX_MODE), HW)
App_Link_Flags += -lsgx_uae_service_sim
else
App_Link_Flags += -lsgx_uae_service
endif
App_Cpp_Objects := $(App_Cpp_Files:.cpp=.o)
App_Name := test
######## Enclave Settings ########
ifneq ($(SGX_MODE), HW)
Trts_Library_Name := sgx_trts_sim
Service_Library_Name := sgx_tservice_sim
else
Trts_Library_Name := sgx_trts
Service_Library_Name := sgx_tservice
endif
Crypto_Library_Name := sgx_tcrypto
Enclave_Cpp_Files := Enclave/enclave.cpp $(wildcard Enclave/Edger8rSyntax/*.cpp) $(wildcard Enclave/TrustedLibrary/*.cpp)
#更改成我们的cpp文件
Enclave_Include_Paths := -IInclude -IEnclave -I$(SGX_SDK)/include -I$(SGX_SDK)/include/tlibc -I$(SGX_SDK)/include/stlport
Enclave_C_Flags := $(SGX_COMMON_CFLAGS) -nostdinc -fvisibility=hidden -fpie -fstack-protector $(Enclave_Include_Paths)
Enclave_Cpp_Flags := $(Enclave_C_Flags) -std=c++03 -nostdinc++
# To generate a proper enclave, it is recommended to follow below guideline to link the trusted libraries:
# 1. Link sgx_trts with the `--whole-archive' and `--no-whole-archive' options,
# so that the whole content of trts is included in the enclave.
# 2. For other libraries, you just need to pull the required symbols.
# Use `--start-group' and `--end-group' to link these libraries.
# Do NOT move the libraries linked with `--start-group' and `--end-group' within `--whole-archive' and `--no-whole-archive' options.
# Otherwise, you may get some undesirable errors.
Enclave_Link_Flags := $(SGX_COMMON_CFLAGS) -Wl,--no-undefined -nostdlib -nodefaultlibs -nostartfiles -L$(SGX_LIBRARY_PATH) \
-Wl,--whole-archive -l$(Trts_Library_Name) -Wl,--no-whole-archive \
-Wl,--start-group -lsgx_tstdc -lsgx_tstdcxx -l$(Crypto_Library_Name) -l$(Service_Library_Name) -Wl,--end-group \
-Wl,-Bstatic -Wl,-Bsymbolic -Wl,--no-undefined \
-Wl,-pie,-eenclave_entry -Wl,--export-dynamic \
-Wl,--defsym,__ImageBase=0 \
-Wl,--version-script=Enclave/Enclave.lds #lds文件的使用
Enclave_Cpp_Objects := $(Enclave_Cpp_Files:.cpp=.o)
Enclave_Name := enclave.so
Signed_Enclave_Name := enclave.signed.so
Enclave_Config_File := Enclave/Enclave.config.xml
ifeq ($(SGX_MODE), HW)
ifeq ($(SGX_DEBUG), 1)
Build_Mode = HW_DEBUG
else ifeq ($(SGX_PRERELEASE), 1)
Build_Mode = HW_PRERELEASE
else
Build_Mode = HW_RELEASE
endif
else
ifeq ($(SGX_DEBUG), 1)
Build_Mode = SIM_DEBUG
else ifeq ($(SGX_PRERELEASE), 1)
Build_Mode = SIM_PRERELEASE
else
Build_Mode = SIM_RELEASE
endif
endif
.PHONY: all run
ifeq ($(Build_Mode), HW_RELEASE)
all: .config_$(Build_Mode)_$(SGX_ARCH) $(App_Name) $(Enclave_Name)
@echo "The project has been built in release hardware mode."
@echo "Please sign the $(Enclave_Name) first with your signing key before you run the $(App_Name) to launch and access the enclave."
@echo "To sign the enclave use the command:"
@echo " $(SGX_ENCLAVE_SIGNER) sign -key -enclave $(Enclave_Name) -out <$(Signed_Enclave_Name)> -config $(Enclave_Config_File)"
@echo "You can also sign the enclave using an external signing tool."
@echo "To build the project in simulation mode set SGX_MODE=SIM. To build the project in prerelease mode set SGX_PRERELEASE=1 and SGX_MODE=HW."
else
all: .config_$(Build_Mode)_$(SGX_ARCH) $(App_Name) $(Signed_Enclave_Name)
ifeq ($(Build_Mode), HW_DEBUG)
@echo "The project has been built in debug hardware mode."
else ifeq ($(Build_Mode), SIM_DEBUG)
@echo "The project has been built in debug simulation mode."
else ifeq ($(Build_Mode), HW_PRERELEASE)
@echo "The project has been built in pre-release hardware mode."
else ifeq ($(Build_Mode), SIM_PRERELEASE)
@echo "The project has been built in pre-release simulation mode."
else
@echo "The project has been built in release simulation mode."
endif
endif
run: all
ifneq ($(Build_Mode), HW_RELEASE)
@$(CURDIR)/$(App_Name)
@echo "RUN => $(App_Name) [$(SGX_MODE)|$(SGX_ARCH), OK]"
endif
######## App Objects ########
App/enclave_u.c: $(SGX_EDGER8R) Enclave/enclave.edl#更改成我们自己的edl文件,此处生成的_t.c要与我们程序中包含的文件_u.h内容以值
@cd App && $(SGX_EDGER8R) --untrusted ../Enclave/enclave.edl --search-path ../Enclave --search-path $(SGX_SDK)/include #edl要改成我们自己的文件
@echo "GEN => $@"
App/enclave_u.o: App/enclave_u.c #改成上述生成的enclave_u.c
@$(CC) $(App_C_Flags) -c $< -o $@
@echo "CC <= $<"
App/%.o: App/%.cpp
@$(CXX) $(App_Cpp_Flags) -c $< -o $@
@echo "CXX <= $<"
$(App_Name): App/enclave_u.o $(App_Cpp_Objects)#改成上述步骤生成的_u.o文件
@$(CXX) $^ -o $@ $(App_Link_Flags)
@echo "LINK => $@"
.config_$(Build_Mode)_$(SGX_ARCH):
@rm -f .config_* $(App_Name) $(Enclave_Name) $(Signed_Enclave_Name) $(App_Cpp_Objects) App/enclave_u.* $(Enclave_Cpp_Objects) Enclave/enclave_t.*#修改我们生成的相关内容
@touch .config_$(Build_Mode)_$(SGX_ARCH)
######## Enclave Objects ########
Enclave/enclave_t.c: $(SGX_EDGER8R) Enclave/enclave.edl#更改文件内容,这部分是可信的生成文件要与我们文件中include的文件相同
@cd Enclave && $(SGX_EDGER8R) --trusted ../Enclave/enclave.edl --search-path ../Enclave --search-path $(SGX_SDK)/include#更改edl文件
@echo "GEN => $@"
Enclave/enclave_t.o: Enclave/enclave_t.c #根据我们更改的内容,修正我们生成的文件名称
@$(CC) $(Enclave_C_Flags) -c $< -o $@
@echo "CC <= $<"
Enclave/%.o: Enclave/%.cpp
@$(CXX) $(Enclave_Cpp_Flags) -c $< -o $@
@echo "CXX <= $<"
$(Enclave_Name): Enclave/enclave_t.o $(Enclave_Cpp_Objects)#同理更改
@$(CXX) $^ -o $@ $(Enclave_Link_Flags)
@echo "LINK => $@"
$(Signed_Enclave_Name): $(Enclave_Name)
@$(SGX_ENCLAVE_SIGNER) sign -key Enclave/Enclave_private.pem -enclave $(Enclave_Name) -out $@ -config $(Enclave_Config_File)#签名,使用pem进行签名
@echo "SIGN => $@"
.PHONY: clean
clean:
@rm -f .config_* $(App_Name) $(Enclave_Name) $(Signed_Enclave_Name) $(App_Cpp_Objects) App/enclave_u.* $(Enclave_Cpp_Objects) Enclave/enclave_t.*#更改成我们需要的名称
之后使用make,之后运行生成的程序,结果如下:
之后运行./test,结果如下:
我们的enclave版hello world就完成了!