login as: root
[email protected]'s password:
Last login: Thu Apr 26 01:34:42 2012 from rac2
[root@rac1 ~]# fdiks -l
-bash: fdiks: command not found
[root@rac1 ~]# fdisk -l
Disk /dev/sda: 128.8 GB, 128849018880 bytes
255 heads, 63 sectors/track, 15665 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 15665 125724690 8e Linux LVM
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
[root@rac1 ~]# Disk /dev/sdb doesn't contain a valid partition table
>
[root@rac1 ~]# mkdir /mnt/sdb
[root@rac1 ~]# mount /dev/sdb /mnt/sdb
mount: you must specify the filesystem type
[root@rac1 ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklab el
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-261, default 261):
Using default value 261
Command (m for help): p
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 261 2096451 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -l
Disk /dev/sda: 128.8 GB, 128849018880 bytes
255 heads, 63 sectors/track, 15665 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 15665 125724690 8e Linux LVM
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 261 2096451 83 Linux
[root@rac1 ~]#
参考文章解决方法
虚拟机环境,linux系统下新添加了一块硬盘
1. 虚拟机--设置--添加,选择硬盘添加
2. 首先为磁盘创建文件系统:mkfs.ext3 /dev/sdb
3. 创建挂载点:mkdir /mnt/sdb
4. 挂载:mount /dev/sdb /mnt/sdb
5. fdisk -l
发现有问题:
Disk /dev/sdb doesn't contain a valid partition table
6. fdisk /dev/sdb
跟着向导一步步做下去(如果不知道该输入什么,就输入“m”并回车,可以打印出菜单):
Command (m for help):m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
(后面的菜单省略,太长了)
这里我们要添加一个新的分区,所以输入“n”:
Command (m for help):n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4):1
First cylinder (1-14098, default 1):(此处直接回车)
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-14098, default 14098): (此处直接回车)
Using default value 14098
Command (m for help):p
Disk /dev/sdb: 115.9 GB, 115964116992 bytes
255 heads, 63 sectors/track, 14098 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 14098 113242153+ 83 Linux
现在可以写入分区表了,所以输入“w”:
Command (m for help):w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
现在再fdisk -l,结果正常。
|