FastDFS分布式文件系统集群安装

跟踪服务器： 

Tracker Server1 IP:  10.10.16.201FASTDFS-TRACKER-01

Tracker Server2 IP:  10.10.16.202FASTDFS-TRACKER-02

 

存储服务器：

Storage Server1 IP:  10.10.16.203FASTDFS-STORAGE-01

Storage Server2 IP:  10.10.16.204FASTDFS-STORAGE-02

 

集群中各操作系统环境设置：

(1) fastdfs安装目录：/usr/local/fastdfs

[root@FASTDFS-TRACKER-01local]# mkdir /usr/local/fastdfs

[root@FASTDFS-TRACKER-02local]# mkdir /usr/local/fastdfs

[root@FASTDFS-STORAGE-01local]# mkdir /usr/local/fastdfs

[root@FASTDFS-STORAGE-02local]# mkdir /usr/local/fastdfs

 

(2)创建fastdfs用户组及fastdfs用户（四台机同时配置）:

[root@xxx]# groupadd fastdfs

[root@xxx]# useradd -g fastdfs fastdfs

[root@xxx]# passwd fastdfs

## 设置fastdfs用户密码为gzzyzz.com （上生产前要改）

 

(3) 创建数据存储目录:

#创建tracker目录保存运行日志(Tracker服务器)

[fastdfs@FASTDFS-TRACKER-01 ~]$ mkdir -p/home/fastdfs/tracker

[fastdfs@FASTDFS-TRACKER-02 ~]$ mkdir -p/home/fastdfs/tracker

#创建Storage目录保存运行日志及其data数据（Storage服务器）

[fastdfs@FASTDFS-STORAGE-01 ~] $ mkdir-p /home/fastdfs/storage

[fastdfs@FASTDFS-STORAGE-02 ~] $ mkdir-p /home/fastdfs/storage

 

注：因为要源码编译安装软件，因而各系统要事先安装好:make cmake gcc gcc-c++

[[email protected]]# yum install make cmake gcc gcc-c++

 

1、 首先安装libevent（集群中所有服务器都执相同的安装）:

fastdfs在编译源程序时fastdfs内部调用libevent的处理机制,需要用到libevent一些依赖文件,否则编译fastdfs会出错。

# 卸载系统自带libevent,自带版本过低,要不然安装fastdfs会出错

[root@FASTDFS-TRACKER-01 fastdfs]# rpm -qa|grep libevent

libevent-1.4.13-4.el6.x86_64

（由上可以系统自带了libevent-1.4.13-4.el6.x86_64）

卸载：

[root@FASTDFS-TRACKER-01 fastdfs]# rpm -e --nodeps libevent-1.4.13-4.el6.x86_64

 

#下载安装libevent

进入/usr/local/src目录

# cd/usr/local/src/

[root@FASTDFS-TRACKER-01 src]#

wget http://cloud.github.com/downloads/libevent/libevent/libevent-2.0.19-stable.tar.gz

 

[root@FASTDFS-TRACKER-01src]# tar -zxvflibevent-2.0.19-stable.tar.gz

[root@FASTDFS-TRACKER-01 src]# cd libevent-2.0.19-stable

#make clean;

[[email protected]]$ ./configure --prefix=/usr/local/libevent

[[email protected]]# make

[[email protected]]# make && make install

#为libevent创建软链接到/lib库下，64位系统对应/lib64

[[email protected]]#

ln -s/usr/local/libevent/lib/libevent-2.0.so.5 /usr/lib/libevent-2.0.so.5

[[email protected]]#

ln -s/usr/local/libevent/lib/libevent-2.0.so.5 /usr/lib64/libevent-2.0.so.5

 

2、 安装FastDFS（集群中所有服务器都执相同的安装）:

进入/usr/local/src目录

[root@FASTDFS-TRACKER-01src]#

wget https://fastdfs.googlecode.com/files/FastDFS_v4.06.tar.gz

[root@FASTDFS-TRACKER-01src]# tar -zxvf FastDFS_v4.06.tar.gz

[root@FASTDFS-TRACKER-01src]# cd FastDFS

 

#由于定义/usr/local/fastdfs为fastdfs安装目录,所以需要修改make.sh

[gw@register2FastDFS]$ vi make.sh

# /etc/fdfs 全部替换为 /usr/local/fastdfs/conf

#TARGET_PREFIX=/usr/local 修改为 /usr/local/fastdfs

#TARGET_CONF_PATH=/etc/fdfs 修改为 /usr/local/fastdfs/conf

附件：

 

#安装

[root@FASTDFS-TRACKER-01FastDFS]$

./make.shC_INCLUDE_PATH=/usr/local/libevent/include LIBRARY_PATH=/usr/local/libevent/lib

# 切换到超级管理员

[root@FASTDFS-TRACKER-01FastDFS]# ./make.sh install

 

注意：如果安装时提示找不到命令，请查看是不是没有装perl安装环境

wget  http://www.cpan.org/src/5.0/perl-5.18.2.tar.gz

tar-zxvf  perl-5.18.2.tar.gz

cd perl-5.18.2

./Configure

make

make install

 

3、 配置Tracker Server（10.10.16.201，10.10.16.202）:

进入/usr/local/fastdfs/conf

#修改tracker.conf配置

[root@FASTDFS-TRACKER-01conf]# vi /usr/local/fastdfs/conf/tracker.conf

绑定IP:

bind_addr=10.10.16.201和bind_addr=10.10.16.202

 

#设置日志目录

由base_path=/home/yuqing/fastdfs改为 base_path=/home/fastdfs/tracker

store_group=group1

run_by_group= 改为 run_by_group=fastdfs

run_by_user= 改为 run_by_user=fastdfs

trunk_create_file_space_threshold= 20G

#开启自trunk_create_file_space_threshold定义server ID取代ip形式,方便内部网络服务器更换ip#**此方式要重点理解，4.0以后新特性

use_storage_id = true #使用server ID作为storage server标识

storage_ids_filename = storage_ids.conf #

id_type_in_filename = id #文件名反解析中包含server ID,以前是ip

 

复制storage_ids.conf文件

[root@FASTDFS-TRACKER-01conf]#

cp/usr/local/src/FastDFS/conf/storage_ids.conf /usr/local/fastdfs/conf/

#编辑storage服务器ID与IP地址的对应关系

[root@register1conf]# vi /usr/local/fastdfs/conf/storage_ids.conf

#    

100001  group1       10.10.16.203

100002  group1       10.10.16.204

 

防火墙打开8080和22122端口：

# vi /etc/sysconfig/iptables

增加：

-A INPUT-m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

-A INPUT-m state --state NEW -m tcp -p tcp --dport 22122 -j ACCEPT

重启防火墙:

# /etc/init.d/iptables restart

 

自定义tracker服务启动、关闭、重启脚本：

# su fastdfs

切换回fastdfs用户后

$ cd /home/fastdfs/tracker/

(1)启动脚本：

[fastdfs@FASTDFS-TRACKER-01tracker]$ vi start_tracker.sh

/usr/local/fastdfs/bin/fdfs_trackerd/usr/local/fastdfs/conf/tracker.conf

 

(2)关闭脚本（使用FastDFS自带的stop.sh脚本）：

[fastdfs@FASTDFS-TRACKER-01tracker]$ vi stop_tracker.sh

/usr/local/fastdfs/bin/stop.sh/usr/local/fastdfs/bin/fdfs_trackerd /usr/local/fastdfs/conf/tracker.conf

 

(3)重启脚本（使用FastDFS自带的restart.sh脚本）：

[fastdfs@FASTDFS-TRACKER-01tracker]$ vi restart_tracker.sh

/usr/local/fastdfs/bin/restart.sh/usr/local/fastdfs/bin/fdfs_trackerd /usr/local/fastdfs/conf/tracker.conf

 

注意：千万不要使用kill -9参数强杀进程，否则可能会导致binlog数据丢失的问题

 

给自定义脚本赋予可执行权限：

[fastdfs@FASTDFS-TRACKER-01tracker]$ chmod +x *_tracker.sh

 

启动tracker服务：

[fastdfs@FASTDFS-TRACKER-01 tracker]$ ./start_tracker.sh

查看是否启用成功：

[fastdfs@FASTDFS-TRACKER-01tracker]$ ps -ef | grep fastdfs

root     27253 26511  0 10:03 pts/0    00:00:00 su fastdfs

fastdfs  27254 27253 0 10:03 pts/0    00:00:00 bash

fastdfs  27580    1  0 10:25 ?        00:00:00 /usr/local/fastdfs/bin/fdfs_trackerd/usr/local/fastdfs/conf/tracker.conf

fastdfs  27588 27254 5 10:25 pts/0    00:00:00 ps -ef

fastdfs  27589 27254 0 10:25 pts/0    00:00:00 grepfastdfs

[fastdfs@FASTDFS-TRACKER-01tracker]$

（首次正常启动后会在/home/fastdfs/tracker目录下会产生data目录和logs目录）

[2014-01-12 16:33:54]INFO - local_host_ip_count: 2, 127.0.0.1  10.10.16.201

[2014-01-1216:34:11] INFO - file: tracker_service.c, line: 920, thetracker leader is 10.10.16.202:22122

停用tracker服务：

[fastdfs@FASTDFS-TRACKER-01tracker]$ ./stop_tracker.sh

 

重启tracker服务：

[fastdfs@FASTDFS-TRACKER-01tracker]$ ./restart_tracker.sh

  

4、 配置Storage Server(10.10.16.203、10.10.16.204，两台机执行相同的配置操作)：

# cd /usr/local/fastdfs/conf

# vi storage.conf

绑定IP分别为:

bind_addr=10.10.16.203和bind_addr=10.10.16.204

 

base_path=/home/yuqing/fastdfs改为base_path=/home/fastdfs/storage

store_path0=/home/yuqing/fastdfs改为 store_path0=/home/fastdfs/storage

tracker_server=192.168.209.121:22122改为

tracker_server=10.10.16.201:22122

tracker_server=10.10.16.202:22122

（这里我们配了两个跟踪器服务）

run_by_group= 改为 run_by_group=fastdfs

run_by_user= 改为 run_by_user=fastdfs

# 与Nginx端口相同

http.server_port=80

 

防火墙打开23000和8888端口：

# vi /etc/sysconfig/iptables

增加：

-A INPUT-m state --state NEW -m tcp -p tcp --dport 23000 -j ACCEPT

-A INPUT-m state --state NEW -m tcp -p tcp --dport 8888 -j ACCEPT

重启防火墙:

# /etc/init.d/iptables restart

 

自定义storage服务启动、关闭、重启脚本：

# su fastdfs

切换回fastdfs用户后

$ cd /home/fastdfs/storage/

(1)启动脚本：

[fastdfs@FASTDFS-STORAGE-01storage]$ vi start_storage.sh

/usr/local/fastdfs/bin/fdfs_storaged/usr/local/fastdfs/conf/storage.conf

 

(2)关闭脚本（使用FastDFS自带的stop.sh脚本）：

[fastdfs@FASTDFS-STORAGE-01storage]$ vi stop_tracker.sh

/usr/local/fastdfs/bin/stop.sh/usr/local/fastdfs/bin/fdfs_storaged /usr/local/fastdfs/conf/storage.conf

 

(3)重启脚本（使用FastDFS自带的restart.sh脚本）：

[fastdfs@FASTDFS-STORAGE-01storage]$ vi restart_storage.sh

/usr/local/fastdfs/bin/restart.sh/usr/local/fastdfs/bin/fdfs_storaged /usr/local/fastdfs/conf/storage.conf

 

注意：千万不要使用kill -9参数强杀进程，否则可能会导致binlog数据丢失的问题

 

给自定义脚本赋予可执行权限：

[fastdfs@FASTDFS-STORAGE-01storage]$ chmod +x *_storage.sh

 

启动StorageServer:

[fastdfs@FASTDFS-STORAGE-01storage]$ ./start_storage.sh

data path:/home/fastdfs/storage/data, mkdir sub dir...

mkdir data path: 00...

mkdir data path: 01...

mkdir data path: 02...

mkdir data path: 03...

（首次成功启动会初始化数据存储目录）

 

重启storage服务：

[fastdfs@FASTDFS-STORAGE-01storage]$ ./restart_storage.sh

 

停止storage服务：

[fastdfs@FASTDFS-STORAGE-01storage]$ ./stop_storage.sh

 

Storage Server（10.10.16.203和10.10.16.204）安装Nginx:

#安装Nginx使用fastdfs用户

#创建nginx日志目录

# mkdir -p /home/fastdfs/nginx/logs

# chmod a+w /home/fastdfs/nginx/logs

# chown -R fastdfs:fastdfs /home/fastdfs/nginx/logs

 

安装nginx1.4.4:

# cd /usr/local/src

#下载 nginx

[root@FASTDFS-STORAGE-01src]#

wgethttp://nginx.org/download/nginx-1.4.4.tar.gz

解压：

# tar -zxvf nginx-1.4.4.tar.gz

# cd nginx-1.4.4

 

# ./configure --user=fastdfs --group=fastdfs--prefix=/usr/local/nginx --with-http_stub_status_module

 

如果产生如下错误提示：

checking for PCRElibrary ... not found

checking for PCRElibrary in /usr/local/ ... not found

checking for PCRElibrary in /usr/include/pcre/ ... not found

checking for PCRElibrary in /usr/pkg/ ... not found

checking for PCRElibrary in /opt/local/ ... not found

 

./configure: error:the HTTP rewrite module requires the PCRE library.

You can eitherdisable the module by using --without-http_rewrite_module

option, or installthe PCRE library into the system, or build the PCRE library

statically from thesource with nginx by using --with-pcre= option.

 

（大概意思是：HTTP重定向模块的安装需要PCRE库，网上搜了一下，是需要安装pcre-devel与openssl-devel）

# yum installpcre-devel openssl openssl-devel

（RHEL6.3 x64 桌面版中已自带以上包）

 

再重新执行：

# ./configure --user=fastdfs --group=fastdfs--prefix=/usr/local/nginx --with-http_stub_status_module

 

#--with-http_stub_status_module用来监控nginx的当前状态

Configurationsummary

  + using system PCRE library

  + OpenSSL library is not used

  + md5: using system crypto library

  + sha1: using system crypto library

  + using system zlib library

 

  nginx path prefix:"/usr/local/nginx"

  nginx binary file:"/usr/local/nginx/sbin/nginx"

  nginx configuration prefix:"/usr/local/nginx/conf"

  nginx configuration file:"/usr/local/nginx/conf/nginx.conf"

  nginx pid file:"/usr/local/nginx/logs/nginx.pid"

  nginx error log file:"/usr/local/nginx/logs/error.log"

  nginx http access log file:"/usr/local/nginx/logs/access.log"

  nginx http client request body temporaryfiles: "client_body_temp"

  nginx http proxy temporary files:"proxy_temp"

  nginx http fastcgi temporary files:"fastcgi_temp"

  nginx http uwsgi temporary files:"uwsgi_temp"

  nginx http scgi temporary files:"scgi_temp"

 

执行安装：# make && make install

安装fastdfs-nginx-module插件：

# cd /usr/local/src

# wgethttp://fastdfs.googlecode.com/files/fastdfs-nginx-module_v1.15.tar.gz

# tar -zxvf fastdfs-nginx-module_v1.15.tar.gz

 

#修改插件配置文件

# vi /usr/local/src/fastdfs-nginx-module/src/config

ngx_addon_name=ngx_http_fastdfs_module

HTTP_MODULES="$HTTP_MODULESngx_http_fastdfs_module"

NGX_ADDON_SRCS="$NGX_ADDON_SRCS$ngx_addon_dir/ngx_http_fastdfs_module.c"

CORE_INCS="$CORE_INCS /usr/local/fastdfs/include/fastdfs/usr/local/fastdfs/include/fastcommon/"

CORE_LIBS="$CORE_LIBS -L/usr/local/fastdfs/lib -lfastcommon -lfdfsclient"

CFLAGS="$CFLAGS -D_FILE_OFFSET_BITS=64-DFDFS_OUTPUT_CHUNK_SIZE='256*1024'-DFDFS_MOD_CONF_FILENAME='\"/usr/local/fastdfs/conf/mod_fastdfs.conf\"'"

 

#复制mod_fastdfs.conf到/usr/local/fastdfs/conf/目录下

# cp /usr/local/src/fastdfs-nginx-module/src/mod_fastdfs.conf/usr/local/fastdfs/conf/

 

上面编译时使用的动态链接库：

#启动nginx报错

#./nginx: error while loading sharedlibraries: libfastcommon.so: cannot open shared object file: No such file ordirectory

#解决办法 --->将/usr/local/fastdfs/lib加入系统文件/etc/ld.so.conf中

# vi /etc/ld.so.conf

includeld.so.conf.d/*.conf

/usr/local/fastdfs/lib

 

#更新库文件缓存ld.so.cache

# /sbin/ldconfig -v

 

编译fastdfs-nginx-module模块：

# 重新编译安装nginx

# cd /usr/local/src/nginx-1.4.4

# ./configure--add-module=/usr/local/src/fastdfs-nginx-module/src

 

# make && make install

 

修改mod_fastdfs.conf配置:

# vi /usr/local/fastdfs/conf/mod_fastdfs.conf

 

# connect timeout inseconds

# default value is30s

connect_timeout=30

 

# the base path tostore log files

base_path=/tmp

 

# if load FastDFSparameters from tracker server

# since V1.12

# default value isfalse

load_fdfs_parameters_from_tracker=true

 

# if use storage IDinstead of IP address

# same astracker.conf

# valid only whenload_fdfs_parameters_from_tracker is false

# default value is false

# since V1.13

use_storage_id = true

 

# FastDFStracker_server can ocur more than once, and tracker_server format is

#  "host:port", host can be hostnameor ip address

# valid only whenload_fdfs_parameters_from_tracker is true

tracker_server=10.10.16.201:22122

tracker_server=10.10.16.202:22122

 

# the port of thelocal storage server

# the default valueis 23000

storage_server_port=23000

 

# the group name ofthe local storage server

group_name=group1

 

# if the url / uriincluding the group name

# set to false whenuri like /M00/00/00/xxx

# set to true whenuri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx

# default value isfalse

url_have_group_name= true

 

# path(disk or mountpoint) count, default value is 1

# must same asstorage.conf

store_path_count=1

 

# store_path#, based0, if store_path0 not exists, it's value is base_path

# the paths must beexist

# must same asstorage.conf

store_path0=/home/fastdfs/storage

 

# set the logfilename, such as /usr/local/apache2/logs/mod_fastdfs.log

# empty for outputto stderr (apache and nginx error_log file)

log_filename=/home/fastdfs/nginx/logs/mod_fastdfs.log

 

 注意, 下载时如发现老报404. 将nginx.conf第一行 usrnobody 修改为 userroot 重新启动后解决.

 

给 storage的存储目录做一个软连接

# ln -s /home/fastdfs/storage/data/home/fastdfs/storage/data/M00

 

访问路径带group名（storage对应有多个group的情况），如/group1/M00/00/00/xxx:
      location ~/group([0-9])/M00 {
           ngx_fastdfs_module;
        }

 

nginx配置简洁版本:

# vi /usr/local/nginx/conf/nginx.conf

userroot root;

worker_processes  2;

error_log  /home/fastdfs/nginx/logs/error.log  notice;

pid        /home/fastdfs/nginx/logs/nginx.pid;

worker_rlimit_nofile5120;

 

events{

    use epoll;

    worker_connections  5120;

}

 

http {

    include       mime.types;

    default_type  application/octet-stream;

    sendfile        on;

    tcp_nopush     on;

    keepalive_timeout  65;

    tcp_nodelay on;

    server {

        listen       80;

        server_name  localhost;

        #charset koi8-r;

        location ~/group([0-9])/M00 {

            #alias /home/fastdfs/storage/data;

            ngx_fastdfs_module;

        }

    }

}

 

#启动nginx：

# /usr/local/nginx/sbin/nginx

 

#重启nginx：

# /usr/local/nginx/sbin/nginx -s reload

 

用Java客户端上传一个文件：

浏览

 

文件的访问通过硬件做均衡负载

VIP:10.10.16.209 (做负载均衡的虚拟机网关要设为10.10.16.8)

 

5、 a

6、 a

7、 a

8、 a

9、 a

内容详情参考实战操作视频教程