Keepalived+lvs实现高可用负载均衡双主模式
Keepalived一开始就是为lvs设计的，解决了单点服务器的故障问题，能保证服务不中断、稳定运行。（《keepalived在前一篇博客Nginx+keepalived实现高可用负载均衡的主从模式》http://legehappy.blog.51cto.com/13251607/1974468就已经介绍过了，这里不多介绍了）
Lvs是一种集群(Cluster)技术：采用IP负载均衡技术和基于内容请求分发技术。调度器具有很好的吞吐率，将请求均衡地转移到不同的服务器上执行，且调度器自动屏蔽掉服务器的故障，从而将一组服务器构成一个高性能的、高可用的虚拟服务器。整个服务器集群的结构对客户是透明的，而且无需修改客户端和服务器端的程序。工作在四层，在内核空间工作，基于ipvs模块，不占用流量。
双机高可用方法目前分为两种：
1）双机主从模式：即前端使用两台服务器，一台主服务器和一台热备服务器，正常情况下，主服务器绑定一个公网虚拟IP，提供负载均衡服务，热备服务器处于空闲状态；当主服务器发生故障时，热备服务器接管主服务器的公网虚拟IP，提供负载均衡服务；但是热备服务器在主机器不出现故障的时候，永远处于浪费状态，对于服务器不多的网站，该方案不经济实惠。
2）双机主主模式：这种模式的效果很强大，即前端使用两台负载均衡服务器，互为主备，且都处于活动状态（这样达到不浪费服务器），同时各自绑定一个公网虚拟IP，提供负载均衡服务；当其中一台发生故障时，另一台接管发生故障服务器的公网虚拟IP（这时由非故障机器一台负担所有的请求）。这种方案，经济实惠，非常适合于当前架构环境。
一、环境介绍：
操作系统：
[root@centos-4 ~]# cat /etc/redhat-release
CentOS release 6.9 (Final)
服务器对应关系：
KA1：192.168.5.129 centos-1
KA2：192.168.5.128 centos-4
Vip1：192.168.5.200 129master/128backup
VIP2：192.168.5.210 128master/129backup
Web1：192.168.5.131 centos-2
Web2：192.168.5.132 centos-3
Client：192.168.5.140centos-5
二、环境安装：
安装依赖：
（在KA1和KA2机器上执行以下步骤）
[root@centos-4 ~]# yum -y install gcc pcre-devel zlib-devel openssl-devel [root@centos-4~]# cd /usr/local/src/ [root@centos-4 src]# wget http://nginx.org/download/nginx-1.9.7.tar.gz
安装nginx
[root@centos-4 src]# tar -zvxfnginx-1.9.7.tar.gz [root@centos-4 src]# cd nginx-1.9.7 [root@centos-4 nginx-1.9.7]#./configure --prefix=/usr/local/nginx --user=nginx --group=nginx--with-http_ssl_module --with-http_flv_module --with-http_stub_status_module--with-http_gzip_static_module --with-pcre
[root@centos-4 nginx-1.9.7]# make &&make install [root@centos-1 ~]# yum install -y keepalived [root@centos-1 ~]# yum install –y ipvsadm
(在web1服务器和web2服务器上安装nginx)
[root@centos-2~]# yum -y install gcc pcre-devel zlib-devel openssl-devel [root@centos-2~]# cd /usr/local/src/ [root@centos-2 src]# wget http://nginx.org/download/nginx-1.9.7.tar.gz
安装nginx
[root@centos-2 src]# tar -zvxfnginx-1.9.7.tar.gz [root@centos-2 src]# cd nginx-1.9.7 [root@centos-2 nginx-1.9.7]# ./configure --prefix=/usr/local/nginx --user=nginx --group=nginx--with-http_ssl_module --with-http_flv_module --with-http_stub_status_module--with-http_gzip_static_module --with-pcre
[root@centos-2 nginx-1.9.7]# make &&make install
三、配置服务：
（所以服务器上配置）
[root@centos-1 ~]# cat/etc/sysconfig/selinux SELINUX=disabled [root@centos-1 ~]# getenforce Disabled [root@centos-1 ~]# service iptables stop
1、配置keepalived：
（KA1上操作）
[root@centos-1 ~]#cat /etc/keepalived/keepalived.conf
! Configuration File forkeepalived
global_defs {
notification_email {
[email protected]
#[email protected]
#[email protected]
}
router_id LVS_DEVEL
}
vrrp_script chk_http_port {
script "/opt/check_nginx.sh"
interval 2
weight -5
fall 2
rise 1
}
vrrp_instance VI_1{
state MASTER
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.5.200
}
}
vrrp_instance VI_2{
state BACKUP
interface eth0
virtual_router_id 50
priority 90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.5.210
}
}
track_script {
chk_http_port
}
}
virtual_server192.168.5.200 80 { # 定义转移ip端口80的集群服务
delay_loop 3
lb_algo rr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.5.131 80 { # 定义集群服务包含的RS 1
weight 1 # 权重为1
HTTP_GET { # 定义RS1的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
real_server 192.168.5.132 80 { # 定义集群服务包含的RS 2
weight 1 # 权重为1
HTTP_GET { # 定义RS2的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
}
virtual_server 192.168.5.21080 { # 定义转移ip端口80的集群服务
delay_loop 3
lb_algo rr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.5.131 80 { # 定义集群服务包含的RS 1
weight 1 # 权重为1
HTTP_GET { # 定义RS1的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
real_server 192.168.5.132 80 { # 定义集群服务包含的RS 2
weight 1 # 权重为1
HTTP_GET { # 定义RS2的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
}
（KA2上操作）
[root@centos-2 ~]# cat/etc/keepalived/keepalived.conf
! Configuration File forkeepalived
global_defs {
notification_email {
[email protected]
#[email protected]
#[email protected]
}
router_id LVS_DEVEL
}
vrrp_script chk_http_port {
script "/opt/check_nginx.sh"
interval 2
weight -5
fall 2
rise 1
}
vrrp_instance VI_1{
state BACKUP
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.5.200
}
}
vrrp_instance VI_2{
state MASTER
interface eth0
virtual_router_id 50
priority 90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.5.210
}
}
track_script {
chk_http_port
}
}
virtual_server192.168.5.200 80 { # 定义转移ip端口80的集群服务
delay_loop 3
lb_algo rr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.5.131 80 { # 定义集群服务包含的RS 1
weight 1 # 权重为1
HTTP_GET { # 定义RS1的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
real_server 192.168.5.132 80 { # 定义集群服务包含的RS 2
weight 1 # 权重为1
HTTP_GET { # 定义RS2的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
}
virtual_server192.168.5.210 80 { # 定义转移ip端口80的集群服务
delay_loop 3
lb_algo rr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.5.131 80 { # 定义集群服务包含的RS 1
weight 1 # 权重为1
HTTP_GET { # 定义RS1的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
real_server 192.168.5.132 80 { # 定义集群服务包含的RS 2
weight 1 # 权重为1
HTTP_GET { # 定义RS2的健康状态检测
url {
path /
status_code 200
}
connect_timeout 1
nb_get_retry 3
delay_before_retry 1
}
}
}
编写一个监控nginx的脚本：
需要注意的是，要判断本机nginx是否正常，如果发现nginx不正常，重启之后，等待三秒在校验，任然失败则不尝试，关闭keepalived，发送邮件，其他主机此时接管VIP；
[root@centos-4~]# cat /opt/check_nginx.sh
#!/bin/bash
check=$(ps -C nginx --no-heading | wc -l)
IP=`ip addr | grep ens32 | awk 'NR==2{print $2}'| awk -F '/' '{print $1}'`
if [ "${check}" = "2" ]; then
/usr/local/nginx/sbin/nginx
sleep 2
counter=$(ps -C nginx --no-heading|wc -l)
if [ "${counter}" = "2" ]; then
/etc/init.d/keepalived stop
echo "check $IP nginx is down"| mail -s "check keepalived nginx" *********@qq.com
fi
fi
(KA1一样的监控脚本)
2、在后端两台web服务器上配置vip默认路由和配置两台服务器的nginx（这就不演示怎样配置nginx了。）：
(考虑到方便执行就编写了一个脚本：在web1和web2服务器上配置。)
[root@centos-2 ~]# cat lvs.sh #!/bin/bash #realserver config vip config route arp #legehappy Vip1=192.168.5.200 Vip2=192.168.5.210 source /etc/rc.d/init.d/functions case $1 in start) echo "config vip route arp" > /tmp/lvs1.txt /sbin/ifconfig lo:0 $Vip1 broadcast $Vip1 netmask 255.255.255.255 up /sbin/ifconfig lo:1 $Vip2 broadcast $Vip2 netmask 255.255.255.255 up echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce route add -host $Vip1 dev lo:0 route add -host $Vip2 dev lo:1 ;; stop) echo "deletevip route arp" > /tmp/lvs2.txt /sbin/ifconfig lo:0 down echo"0" > /proc/sys/net/ipv4/conf/lo/arp_ignore echo"0" > /proc/sys/net/ipv4/conf/lo/arp_announce echo"0" > /proc/sys/net/ipv4/conf/all/arp_ignore echo"0" > /proc/sys/net/ipv4/conf/all/arp_announce route del -host $Vip1 dev lo:0 route del -host $Vip2 dev lo:1 ;; *) echo"Usage: $0 (start | stop)" exit 1 esac
（两台后端配置web服务nginx的页面信息）
[root@centos-2 ~]# curl 192.168.5.131
10.2
[root@centos-3 ~]# curl 192.168.5.132
10.3
3、在两台前端服务器上启动keepalived服务，对于192.168.5.200的vip centos-1是master/192.168.5.210的vip centos-1是backup。
[root@centos-1 ~]#service keepalived start [root@centos-4 ~]# service keepalived start
查看日志文件：
[root@centos-1 ~]# cat /var/log/messages
Oct 19 22:00:22 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
Oct 19 22:00:22 centos-1 Keepalived_healthcheckers[46183]: Netlinkreflector reports IP 192.168.5.210 added
Oct 19 22:00:24 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_1)Sending gratuitous ARPs on eth0 for 192.168.5.200
Oct 19 22:00:27 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
（因为KA1先启动keepalived服务所以两个vip都会在KA1上，但第二台keepaliver服务起来后vip2就会被KA2抢占回来。）
[root@centos-4 ~]# cat /var/log/messages
Oct 19 22:01:38 centos-4 Keepalived_healthcheckers[15009]: Netlinkreflector reports IP 192.168.5.210 added
Oct 19 22:01:38 centos-4 avahi-daemon[1513]: Registering new addre***ecord for 192.168.5.210 on eth0.IPv4.
Oct 19 22:01:38 centos-4 Keepalived_vrrp[15010]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
Oct 19 22:01:43 centos-4 Keepalived_vrrp[15010]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
查看ip addr：
[root@centos-1 keepalived]# ip add
2: eth0:
link/ether00:0c:29:0d:f3:5d brd ff:ff:ff:ff:ff:ff
inet 192.168.5.129/24 brd192.168.5.255 scope global eth0
inet 192.168.5.200/32scope global eth0
[root@centos-4 keepalived]#ip addr
2: eth0:
link/ether00:50:56:3a:84:30 brd ff:ff:ff:ff:ff:ff
inet 192.168.5.128/24 brd192.168.5.255 scope global eth0
inet 192.168.5.210/32 scope global eth0
（两台KA1和KA2服务器重启nginx、keepalived服务）
[root@centos-1~]# /usr/local/nginx/sbin/nginx -t nginx:the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok nginx:configuration file /usr/local/nginx/conf/nginx.conf test is successful ###检查配置文件没问题后再执行重启nginx。 [root@centos-1~]# /usr/local/nginx/sbin/nginx -s reload [root@centos-4~]# /usr/local/nginx/sbin/nginx -t nginx:the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok nginx:configuration file /usr/local/nginx/conf/nginx.conf test is successful [root@centos-4~]# /usr/local/nginx/sbin/nginx -s reload [root@centos-1~]# service keepalived restart 停止keepalived： [确定] 正在启动keepalived： [确定] [root@centos-4~]# service keepalived restart 停止keepalived： [确定] 正在启动keepalived： [确定]
四、测试：
验证方法（保证从负载均衡器本机到后端真实服务器之间能正常通信）：
（1）、先测试完成后的效果访问vip1、vip2
Vip1：
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.200
10.3
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.200
10.3
Vip2：
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2
（2）、把KA1keepalived stop掉（模拟KA1主机的keepalived故障）
[root@centos-1 ~]# service keepalived stop
停止 keepalived：
[root@centos-1 ~]# ip addr
2: eth0:
link/ether 00:0c:29:0d:f3:5d brd ff:ff:ff:ff:ff:ff
inet 192.168.5.129/24 brd 192.168.5.255 scope global eth0
inet6 fe80::20c:29ff:fe0d:f35d/64 scope link
valid_lft forever preferred_lft forever
（KA1主机上查看ip addr已经没有vip了。）
在KA2主机上查看日志文件：
[root@centos-4 ~]# cat /var/log/messages
Oct 19 23:20:46 centos-4Keepalived_vrrp[15412]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for192.168.5.200
Oct 19 23:20:46 centos-4avahi-daemon[1513]: Registering new address record for 192.168.5.200 oneth0.IPv4.
Oct 19 23:20:46 centos-4Keepalived_healthcheckers[15411]: Netlink reflector reports IP 192.168.5.200added
Oct 19 23:20:51 centos-4Keepalived_vrrp[15412]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for192.168.5.200
（日志文件显示已经把vip：192.168.5.200接管了）
查看KA2主机的ip addr
[root@centos-4 ~]# ip addr
2: eth0:
link/ether 00:50:56:3a:84:30 brd ff:ff:ff:ff:ff:ff
inet 192.168.5.128/24 brd 192.168.5.255 scope global eth0
inet 192.168.5.210/32 scope global eth0
inet 192.168.5.200/32 scope global eth0
（可以看到已经有两个vip）
检查nginx服务是否被KA2接管且不中断
[root@centos-5~]# curl 192.168.5.200
10.3
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2
注意：
假如你开启keepalived的时候防火墙多了一条drop规则的时候：
[root@13cml2 ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
DROP all -- anywhere anywhere match-set keepalived dst
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
去掉配置文件中的
vrrp_strict
重启keeplived（可能要加上改成单播的方式），就能访问和ping通了