neutron命令行创建路由

路由创建属于网络部分，所以只能是neutron模块可以完成，路由的具体创建步骤如下：

1.  创建路由命令：

(neutron-server)[neutron@B-OPS-9-3 /]$ neutron router-create onlyone

可以看见，onlyone的路由创建成功,其id=481b4902-2b3-4fec-a757-d90688b73558 。可查看其信息：

下面继续配置子网，使子网连接到路由

2. 查看当前子网：

(neutron-server)[neutron@B-OPS-9-3 /]$ neutron net-list

这里以  fly-net为例。

3.  添加子网（subnet）到路由，注意这里是子网，是subnets这一列（最后一列）：

(neutron-server)[neutron@B-OPS-9-3 /]$ neutron router-interface-add \ 

481b4902-2b3-4fec-a757-d90688b73558 \  #路由id

92e158f7-0771-4fa3-ad36-e67e5608d151   # 子网subnet id

说明添加子网成功！

附录：

(neutron-server)[neutron@B-OPS-9-3 /]$ neutron  help  |egrep  router
  l3-agent-list-hosting-router      List L3 agents hosting a router.
  l3-agent-router-add               Add a router to a L3 agent.
  l3-agent-router-remove            Remove a router from a L3 agent.
  net-gateway-connect               Add an internal network interface to a router.
  router-create                     Create a router for a given tenant.
  router-delete                     Delete a given router.
  router-gateway-clear              Remove an external network gateway from a router.
  router-gateway-set                Set the external network gateway for a router.
  router-interface-add              Add an internal network interface to a router.
  router-interface-delete           Remove an internal network interface from a router.
  router-list                       List routers that belong to a given tenant.
  router-list-on-l3-agent           List the routers on a L3 agent.
  router-port-list                  List ports that belong to a given tenant, with specified router.
  router-show                       Show information of a given router.
  router-update                     Update router's information.