我们使用的是VPP 20.01 版本 + strongswan 5.8.3版本编译。
目前strongSwan+vpp的方案主要是使用strongswan的插件机制,替换strongswan的两个默认插件
将默认的socket-default连接替换为VPP的punt socket方式,punt socket会将ike协议报文通过VPP上送到strongswan中,strongswan也会将回应的报文通过punt socket传输回vpp,IKE的协商层面是通过strongswan完成。
ike协商完成之后,strongswan通过vpp的C语言 API向VPP下发IPSEC的配置,sa spd 路由等等,下发完成配置之后,VPP的IPSEC隧道就完成了建立。
用strongswan替换VPP自身的IKE功能,是因为VPP本身的IKE只支持IKE V2而且功能的丰富度不如strongswan完善。
https://github.com/matfabia/strongswan/tree/vpp
该项目是strongswan+vpp这个方案的最初的项目,确定了strongswan与vpp结合的大致方向,完成度也比较高,后续的其他开源项目都是在此基础上修修补补。
该项目在上传最初代码后,就停止更新了,代码基于的VPP版本应该是v18.01左右
https://github.com/mestery/strongswan
该项目是基于上面原始项目进行修改,支持VPP 的1810版本,进行了小幅度的API适配整体和上面项目相差不大。随后该项目也停止更新了,但是该项目中有一个pull request比较关键,在4500 UDP端口上支持了NAT-T IKE,增加了一些VPP新支持的加密算法例如GCM的支持。但是该pull request并没有合入到该项目,因为作者可能已经忘记这个项目了。
https://github.com/rayshi-10/Strongswan-Vpp2001
该项目是基于第二个项目做的,而且把第二个项目中pull request合入了进来,支持了VPP后来加入的更多加密和认证算法,而且支持NAT-T IKE。然后支持了VPP v20.01版本。这个版本的代码修改量还是比较大的。因为VPP v20.01版本API和数据结构的改动是相当大的,大部分原有的IPSEC配置API都发生的变化,进行了多次重构,但是而且设置还删除了一些配置属性,导致原有的流程可以需要改动比较大才能适配。
v20.01的VPP ipv4 ipv6的配置需要显示下发两条,而以前的版本是使用any属性标志下发一条就可以了。这部分的改动需要特别关注下,该项目目测这部分可能会有BUG。可以特别关注下该项目的manage_policy函数,例如下面的部分,is_anyaddr的情况只下发了一条policy。可能会出现问题
if (src->is_anyaddr(src) && dst->is_anyaddr(dst))
{
memset(mp->entry.local_address_stop.un.ip6, 0xFF, 16);
memset(mp->entry.remote_address_stop.un.ip6, 0xFF, 16);
}
该项目基于的strongswan版本是5.6.x版本的,不是最新的release。
首先下载strongswan主线代码,切换到5.8.3分支
git clone https://github.com/strongswan/strongswan.git
git checkout 5.8.3
然后下载rayshi-10 strongswan + vpp 20.01代码
git clone https://github.com/rayshi-10/Strongswan-Vpp2001.git
然后将该项目的
src/libcharon/plugins/kernel_vpp/
src/libcharon/plugins/socket_vpp/
两个目录替换到strongswan 5.8.3对应目录下,然后将该项目configure.ac目录下kernel-vpp socket-vpp相关的内存,添加到strongswan 5.8.3对应的文件里。
注,该项目的configure.ac里面缺少下面两条配置
ADD_PLUGIN([kernel-vpp], [c charon])
ADD_PLUGIN([socket-vpp], [c charon])
需要将这两条配置自行添加到configure.ac中的合适位置,
例如向下面的方式添加
ADD_PLUGIN([kernel-iph], [c charon])
ADD_PLUGIN([kernel-vpp], [c charon])
ADD_PLUGIN([kernel-pfkey], [c charon starter nm cmd])
ADD_PLUGIN([kernel-pfroute], [c charon starter nm cmd])
ADD_PLUGIN([kernel-netlink], [c charon starter nm cmd])
ADD_PLUGIN([resolve], [c charon cmd])
ADD_PLUGIN([save-keys], [c])
ADD_PLUGIN([socket-default], [c charon nm cmd])
ADD_PLUGIN([socket-dynamic], [c charon cmd])
ADD_PLUGIN([socket-win], [c charon])
ADD_PLUGIN([socket-vpp], [c charon])
ADD_PLUGIN([bypass-lan], [c charon nm cmd])
dnssec_status_t
枚举变量在strongswan vpp中进行了重命名,将这个枚举中的变量全都加了DNSS前缀,可能是因为这个枚举里面的变量和VPP里面的内容重名了,我们在替换时,如果编译失败了,可能是忘记重命名该名称导致
重命名后的效果如下
enum dnssec_status_t {
/**
* The validating resolver has a trust anchor, has a chain of
* trust, and is able to verify all the signatures in the response.
* [RFC4033]
*/
DNSS_SECURE,
/**
* The validating resolver has a trust anchor, a chain of
* trust, and, at some delegation point, signed proof of the
* non-existence of a DS record. This indicates that subsequent
* branches in the tree are provably insecure. A validating resolver
* may have a local policy to mark parts of the domain space as
* insecure. [RFC4033]
*/
DNSS_INSECURE,
/**
* The validating resolver has a trust anchor and a secure
* delegation indicating that subsidiary data is signed, but the
* response fails to validate for some reason: missing signatures,
* expired signatures, signatures with unsupported algorithms, data
* missing that the relevant NSEC RR says should be present, and so
* forth. [RFC4033]
*/
DNSS_BOGUS,
/**
* There is no trust anchor that would indicate that a
* specific portion of the tree is secure. This is the default
* operation mode. [RFC4033]
*/
DNSS_INDETERMINATE,
};
在src/libcharon/plugins/socket_vpp/socket_vpp_socket.c中该项目中vpp的punt read path是/tmp目录,该地址可以自行设定,例如我将该地址进行了下面的修改,和VPP其他unix socket放置在同一目录
#define READ_PATH "/var/run/vpp/ike-punt-read.sock"
我的系统是Centos7,使用下面的命令下载编译中的依赖项
yum install gperf
yum install python3
yum install gmp
yum install gmp-devel
git clone https://github.com/FDio/vpp.git
git checkout v20.01
make install-dep
make build-releasels
将编译好的VPP安装到系统中
cp build-root/install-vpp-native/vpp/include/* /usr/include/ -r
cp build-root/install-vpp-native/vpp/lib/* /lib64/ -r
cp build-root/install-vpp-native/vpp/lib/vpp_plugins /lib/ -r
cp build-root/install-vpp-native/vpp/bin/vpp /usr/bin/
cp build-root/install-vpp-native/vpp/bin/vppctl /usr/bin/
最新版本的strongswan在centos下可能编译不过,pkgconfig版本低,缺少PKG_CHECK_VAR
需要在configure.ac前面添加下面的定义
# backwards compat with older pkg-config
# - pull in AC_DEFUN from pkg.m4
m4_ifndef([PKG_CHECK_VAR], [
# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# -------------------------------------------
# Retrieves the value of the pkg-config variable for the given module.
AC_DEFUN([PKG_CHECK_VAR],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
_PKG_CONFIG([$1], [variable="][$3]["], [$2])
AS_VAR_COPY([$1], [pkg_cv_][$1])
AS_VAR_IF([$1], [""], [$5], [$4])dnl
])# PKG_CHECK_VAR
])
./autogen.sh
./configure --enable-socket-vpp --enable-kernel-vpp --enable-libipsec --enable-openssl
make -j 8
make install
安装好的默认目录是/usr/local/,主要文件和目录如下所示
/usr/local/bin/pki
/usr/local/sbin/ipsec
/usr/local/sbin/swanctl
/usr/local/sbin/etc/
目前我测试了strongswan官方文档中拓扑的Roadwarrior Case和Site-to-Site Case,这两种拓扑是移动客户端场景和网关-网关的部署场景。 这里要注意,strongswan的配置方式可能发生了比较大的变化,之前是通过配置ipsec目录下的内容去实现的,而最新的版本一般是用过配置swanctl相关的内容去完成。
官方项目中的README里面的内容是有些错误的,不要去看那部分的内容,例如Roadwarrior Case中网关和客户端的配置中都写的是:
local_ts = 10.1.0.0/16
而显然配置应该是服务器是local_ts = 10.1.0.0/16
而客户端应该是remote_ts = 10.1.0.0/16
这里应该去参考https://www.strongswan.org/testresults.html
该页面中swanctl的部分,这个页面是测试例和执行的情况,是随着版本更新的,而且每发布一个版本会自动跑一遍这些部署场景,这里面有非常详细的每个阶段swanctl的配置和状态,学习新的部署场景和配置应该从这个页面去学习。
我是通过两个qemu-kvm的虚拟机跑了两个vpp + strongswan的VM环境,两者的接口使用brctl通过内核桥连通。
strongswan+vpp的启动顺序,需要首先启动VPP,然后配置好接口之后,启动strongswan,然后启动协商隧道。
startup.conf
statseg
{
default
per-node-counters on
}
socksvr
{
socket-name /var/run/vpp/vpp-api.sock
}
unix
{
cli-listen /run/vpp/cli.sock
log /tmp/vpe.log
nodaemon
coredump-size 1M
}
punt
{
socket /var/run/vpp/ike-punt-write.sock
}
api-trace { on }
heapsize 4G
buffers
{
buffers-per-numa 40000
}
plugins
{
plugin dpdk_plugin.so
{
enable
}
}
cpu
{
# Dynamic Create Option
main-core 0
corelist-workers 1-7
}
dpdk
{
log-level debug
huge-dir /dev/hugepages
no-tx-checksum-offload
dev 0000:00:06.0 { name G1/1 }
dev 0000:00:07.0 { name G1/2 }
}
上面的配置CPU部分需要根据自己的环境编写,绑定工作线程和主线程到某些CPU核。dpdk部分的接口PCI号,也需要根据实际的情况填写,上面的配置ipsec加解密使用了openssl的能力,没有使用dpdk的加解密套件,使用dpdk加解密套件请看最后一节。
上面配置中比较重要的一点是punt这一部分,该配置必须填写。strongswan使用到了两个punt socket,其中一个是VPP startup.conf中指定,是write socket,strongswan写报文使用该unix socket。还有一个是punt读接口,该unix socket在strongswan的socket-vpp插件中启动时,动态向vpp注册,接口的路径在代码中写死。上面已经说过这个问题了。
VPP成功启动后,需要配置接口的IP信息,这一部分信息就根据上面提到的测试例页面中的拓扑来配置就可以。
下面是我的环境中site-to-site中配置CLI命令
moon的配置
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.1/24
vppctl set int ip addr G1/2 10.1.0.1/16
sun的配置
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.2/24
vppctl set int ip addr G1/2 10.2.0.1/16
使用证书认证的话,就需要自己制作证书了,这一部分是比较复杂的,因为strongswan的证书验证比较严格,而且根据网上教程制作出来的证书大多都是认证不通过的。我这里编写了一个车脚本去制作这两个场景的证书。使用了strongswan的pki这个工具,在制作证书之前,需要先下载一个程序,如果不下载该程序的话,可能会生成密钥非常慢,长达几十分钟。
yum install haveged
systemctl start haveged
证书的制作要点就是配置中的id和证书中的CN以及SAN选项要一致
10.1.0.0/16 -- | 192.168.0.1 | === | x.x.x.x |
moon-net moon carol
该脚本是跑在Roadwarrior Case中的移动客户端carol上面的,在此场景中我们carol的管理IP是192.168.199.102,moon的管理IP是192.168.199.101,证书生成之后自动拷贝的,也可以手动拷贝到对应的目录
#!/bin/bash
INSTALLDIR="/usr/local"
CONFIGPATH="$INSTALLDIR/etc"
SERVER_HOST=moon.strongswan.org
SERVER_IP=192.168.0.1
[email protected]
CLIENT_IP=192.168.0.2
# remove old files
rm -rf cert > /dev/null 2>&1
mkdir cert && cd cert
# create CA certificate
echo -e "\033[32mCreate CA certificate...\033[0m"
pki --gen --outform pem > ca.key.pem
pki --self --in ca.key.pem --dn "C=CN, O=StrongSwan, CN=StrongSwan CA" --ca --outform pem > ca.cert.pem
# create server certificate
echo -e "\033[32mCreate server certificate...\033[0m"
pki --gen --outform pem > server.key.pem
pki --pub --in server.key.pem | ipsec pki --issue --cacert ca.cert.pem \
--cakey ca.key.pem --dn "C=CN, O=StrongSwan, CN=$SERVER_HOST" \
--san "$SERVER_HOST" --san="$SERVER_IP" --flag serverAuth --flag ikeIntermediate \
--outform pem > server.cert.pem
# create client certificate
echo -e "\033[32mCreate client certificate...\033[0m"
pki --gen --outform pem > client.key.pem
pki --pub --in client.key.pem | ipsec pki --issue --cacert ca.cert.pem \
--cakey ca.key.pem --dn "C=CN, O=StrongSwan, [email protected]" \
--san "$CLIENT_HOST" --san="CLIENT_IP" \
--outform pem > client.cert.pem
echo -e "\033[32mInstall certificate...\033[0m"
cp ca.cert.pem $CONFIGPATH/swanctl/x509ca/strongswanCert.pem
cp client.cert.pem $CONFIGPATH/swanctl/x509/carolCert.pem
cp client.key.pem $CONFIGPATH/swanctl/private/carolKey.pem
sshpass -pnsfocus scp ca.cert.pem 192.168.199.101:$CONFIGPATH/swanctl/x509ca/strongswanCert.pem
sshpass -pnsfocus scp server.cert.pem 192.168.199.101:$CONFIGPATH/swanctl/x509/moonCert.pem
sshpass -pnsfocus scp server.key.pem 192.168.199.101:$CONFIGPATH/swanctl/private/moonKey.pem
10.1.0.0/16 -- | 192.168.0.1 | === | 192.168.0.2 | -- 10.2.0.0/16
moon-net moon sun sun-net
#!/bin/bash
INSTALLDIR="/usr/local"
CONFIGPATH="$INSTALLDIR/etc"
SERVER_HOST=moon.strongswan.org
SERVER_IP=192.168.0.1
CLIENT_HOST=sun.strongswan.org
CLIENT_IP=192.168.0.2
# remove old files
rm -rf cert > /dev/null 2>&1
mkdir cert && cd cert
# create CA certificate
echo -e "\033[32mCreate CA certificate...\033[0m"
pki --gen --outform pem > ca.key.pem
pki --self --in ca.key.pem --dn "C=CN, O=StrongSwan, CN=StrongSwan CA" --ca --outform pem > ca.cert.pem
# create server certificate
echo -e "\033[32mCreate server certificate...\033[0m"
pki --gen --outform pem > server.key.pem
pki --pub --in server.key.pem | ipsec pki --issue --cacert ca.cert.pem \
--cakey ca.key.pem --dn "C=CN, O=StrongSwan, CN=$SERVER_HOST" \
--san "$SERVER_HOST" --san="$SERVER_IP" --flag serverAuth --flag ikeIntermediate \
--outform pem > server.cert.pem
# create client certificate
echo -e "\033[32mCreate client certificate...\033[0m"
pki --gen --outform pem > client.key.pem
pki --pub --in client.key.pem | ipsec pki --issue --cacert ca.cert.pem \
--cakey ca.key.pem --dn "C=CN, O=StrongSwan, CN=$CLIENT_HOST" \
--san "$CLIENT_HOST" --san="CLIENT_IP" \
--outform pem > client.cert.pem
echo -e "\033[32mInstall certificate...\033[0m"
cp ca.cert.pem $CONFIGPATH/swanctl/x509ca/strongswanCert.pem
cp client.cert.pem $CONFIGPATH/swanctl/x509/carolCert.pem
cp client.key.pem $CONFIGPATH/swanctl/private/carolKey.pem
sshpass -pnsfocus scp ca.cert.pem 192.168.199.101:$CONFIGPATH/swanctl/x509ca/strongswanCert.pem
sshpass -pnsfocus scp server.cert.pem 192.168.199.101:$CONFIGPATH/swanctl/x509/moonCert.pem
sshpass -pnsfocus scp server.key.pem 192.168.199.101:$CONFIGPATH/swanctl/private/moonKey.pem
在进行配置之前,需要先启用我们的kernel-vpp和socket-vpp插件。首先我们将
/usr/local/etc/strongswan.d/charon/kernel-netlink.conf
/usr/local/etc/strongswan.d/charon/socket-default.conf
两个默认插件的内容修改一下将默认加载变成不加载
load = no
然后将我们新增的两个插件加载状态变为yes
/usr/local/etc/strongswan.d/charon/socket-vpp.conf
/usr/local/etc/strongswan.d/charon/kernel-vpp.conf
修改为load = yes
strongswan新版本,我们配置的内容主要是/usr/local/etc/swanctl/swanctl.conf
文件,具体的场景和配置可以参考上面给出的官方测试例的配置。
10.1.0.0/16 -- | 192.168.0.1 | === | x.x.x.x |
moon-net moon carol
证书位置:
/usr/local/etc/swanctl/x509ca/strongswanCert.pem
/usr/local/etc/swanctl/x509/moonCert.pem
/usr/local/etc/swanctl/private/moonKey.pem
swanctl配置
/usr/local/etc/swanctl/swanctl.conf:
connections {
rw {
local {
auth = pubkey
certs = moonCert.pem
id = moon.strongswan.org
}
remote {
auth = pubkey
}
children {
net-net {
local_ts = 10.1.0.0/16
}
}
version = 2
proposals = aes128-sha256-curve25519
}
}
vpp 运行配置:
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.2/24
vppctl set int ip addr G1/2 10.2.0.1/16
证书位置:
/usr/local/etc/swanctl/x509ca/strongswanCert.pem
/usr/local/etc/swanctl/x509/carolCert.pem
/usr/local/etc/swanctl/private/carolKey.pem
swanctl配置:
/usr/local/etc/swanctl/swanctl.conf:
connections {
home {
remote_addrs = moon.strongswan.org
local_addrs = 192.168.0.2
local {
auth = pubkey
certs = carolCert.pem
id = [email protected]
}
remote {
auth = pubkey
id = moon.strongswan.org
}
children {
home {
remote_ts = 10.1.0.0/16
start_action = start
}
}
version = 2
proposals = aes128-sha256-curve25519
}
}
vpp运行配置:
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.2/24
10.1.0.0/16 -- | 192.168.0.1 | === | 192.168.0.2 | -- 10.2.0.0/16
moon-net moon sun sun-net
证书位置
/usr/local/etc/swanctl/x509ca/strongswanCert.pem
/usr/local/etc/swanctl/x509/moonCert.pem
/usr/local/etc/swanctl/private/moonKey.pem
swanctl配置
/usr/local/etc/swanctl/swanctl.conf:
connections {
gw-gw {
local_addrs = 192.168.0.1
remote_addrs = 192.168.0.2
local {
auth = pubkey
certs = moonCert.pem
id = moon.strongswan.org
}
remote {
auth = pubkey
id = sun.strongswan.org
}
children {
net-net {
local_ts = 10.1.0.0/16
remote_ts = 10.2.0.0/16
rekey_time = 5400
rekey_bytes = 500000000
rekey_packets = 1000000
esp_proposals = aes128gcm128-sha256
}
}
version = 2
mobike = no
reauth_time = 10800
proposals = aes128-sha256-x25519
}
}
vpp配置
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.1/24
vppctl set int ip addr G1/2 10.1.0.1/16
证书位置:
/usr/local/etc/swanctl/x509ca/strongswanCert.pem
/usr/local/etc/swanctl/x509/carolCert.pem
/usr/local/etc/swanctl/private/carolKey.pem
swanctl配置
/usr/local/etc/swanctl/swanctl.conf:
connections {
gw-gw {
local_addrs = 192.168.0.2
remote_addrs = 192.168.0.1
local {
auth = pubkey
certs = carolCert.pem
id = sun.strongswan.org
}
remote {
auth = pubkey
id = moon.strongswan.org
}
children {
net-net {
local_ts = 10.2.0.0/16
remote_ts = 10.1.0.0/16
rekey_time = 5400
rekey_bytes = 500000000
rekey_packets = 1000000
esp_proposals = aes128gcm128-sha256
}
}
version = 2
mobike = no
reauth_time = 10800
proposals = aes128-sha256-x25519
}
}
vpp配置
vppctl set int state G1/1 up
vppctl set int state G1/2 up
vppctl set int state local0 up
vppctl set int ip addr G1/1 192.168.0.2/24
vppctl set int ip addr G1/2 10.2.0.1/16
首先启动VPP,配置好strongswan的配置和VPP的配置,然后两端都使用systemctl start strongswan-starter.service
启动strongswan
可以使用swanctl --stats
命令查看一下vpp的插件加载是否正确,在/var/log/messages文件中查看日志是否有报错等等。
然后查看一下VPP端,strongswan是否已经建立好了连接,如果建立成功之后,vpp中应该会有如下的显示
[root@localhost home]# vppctl show api clients
Shared memory clients
Name PID Queue Length Queue VA Health
strongswan 14102 0 0x00000001301ce9c0 OK
[root@localhost home]# vppctl show udp punt
IPV4 UDP ports punt : 500, 4500
IPV6 UDP ports punt : 500, 4500
在两端执行swanctl --load-all
加载所有的配置和证书。
在协商的发起端执行初始化命令,这个net-net是根据当前的swanctl.conf配置文件中children字段里面的内容填写的。
swanctl --initiate --child net-net
或者
swanctl --initiate --child home
查看日志/var/log/messages是否成功,如果有类似如下的显示,则证明IKE协商成功了
Apr 8 18:05:06 localhost ipsec: 08[CFG] initiating 'home'
Apr 8 18:05:06 localhost ipsec: 08[IKE] initiating IKE_SA home[1] to 192.168.0.1
Apr 8 18:05:06 localhost ipsec: 08[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) ]
Apr 8 18:05:06 localhost ipsec: 08[NET] sending packet: from 192.168.0.2[500] to 192.168.0.1[500] (240 bytes)
Apr 8 18:05:06 localhost ipsec: 05[NET] sending vpp packet: from 192.168.0.2[500] to 192.168.0.1[500] by sock 8
Apr 8 18:05:06 localhost charon: 16[ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH SA TSi TSr N(MOBIKE_SUP) N(NO_ADD_ADDR) ]
Apr 8 18:05:06 localhost ipsec: 10[NET] received packet: from 192.168.0.1[500] to 192.168.0.2[500] (273 bytes)
Apr 8 18:05:06 localhost ipsec: 10[ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(FRAG_SUP) N(HASH_ALG) N(CHDLESS_SUP) N(MULT_AUTH) ]
Apr 8 18:05:06 localhost ipsec: 10[CFG] selected proposal: IKE:AES_CBC_128/HMAC_SHA2_256_128/PRF_HMAC_SHA2_256/CURVE_25519
Apr 8 18:05:06 localhost ipsec: 10[IKE] received cert request for "C=CN, O=StrongSwan, CN=StrongSwan CA"
Apr 8 18:05:06 localhost ipsec: 10[IKE] sending cert request for "C=CN, O=StrongSwan, CN=StrongSwan CA"
Apr 8 18:05:06 localhost ipsec: 10[IKE] authentication of '[email protected]' (myself) with RSA_EMSA_PKCS1_SHA2_256 successful
Apr 8 18:05:06 localhost ipsec: 10[IKE] sending end entity cert "C=CN, O=StrongSwan, [email protected]"
Apr 8 18:05:06 localhost ipsec: 10[IKE] establishing CHILD_SA home{1}
Apr 8 18:05:06 localhost ipsec: 10[ENC] generating IKE_AUTH request 1 [ IDi CERT N(INIT_CONTACT) CERTREQ IDr AUTH SA TSi TSr N(MOBIKE_SUP) N(NO_ADD_ADDR) N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]
Apr 8 18:05:06 localhost ipsec: 10[ENC] splitting IKE message (1488 bytes) into 2 fragments
Apr 8 18:05:06 localhost ipsec: 10[ENC] generating IKE_AUTH request 1 [ EF(1/2) ]
Apr 8 18:05:06 localhost ipsec: 10[ENC] generating IKE_AUTH request 1 [ EF(2/2) ]
Apr 8 18:05:06 localhost ipsec: 10[NET] sending packet: from 192.168.0.2[500] to 192.168.0.1[4500] (1252 bytes)
Apr 8 18:05:06 localhost ipsec: 10[NET] sending packet: from 192.168.0.2[500] to 192.168.0.1[4500] (308 bytes)
Apr 8 18:05:06 localhost ipsec: 05[NET] sending vpp packet: from 192.168.0.2[500] to 192.168.0.1[4500] by sock 8
Apr 8 18:05:06 localhost ipsec: 05[NET] sending vpp packet: from 192.168.0.2[500] to 192.168.0.1[4500] by sock 8
Apr 8 18:05:06 localhost ipsec: 11[NET] received packet: from 192.168.0.1[4500] to 192.168.0.2[500] (1252 bytes)
Apr 8 18:05:06 localhost ipsec: 11[ENC] parsed IKE_AUTH response 1 [ EF(1/2) ]
Apr 8 18:05:06 localhost ipsec: 11[ENC] received fragment #1 of 2, waiting for complete IKE message
Apr 8 18:05:06 localhost ipsec: 16[NET] received packet: from 192.168.0.1[4500] to 192.168.0.2[500] (164 bytes)
Apr 8 18:05:06 localhost ipsec: 16[ENC] parsed IKE_AUTH response 1 [ EF(2/2) ]
Apr 8 18:05:06 localhost ipsec: 16[ENC] received fragment #2 of 2, reassembled fragmented IKE message (1344 bytes)
Apr 8 18:05:06 localhost ipsec: 16[ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH SA TSi TSr N(MOBIKE_SUP) N(NO_ADD_ADDR) ]
Apr 8 18:05:06 localhost ipsec: 16[IKE] received end entity cert "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost ipsec: 16[CFG] using certificate "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost ipsec: 16[CFG] using trusted ca certificate "C=CN, O=StrongSwan, CN=StrongSwan CA"
Apr 8 18:05:06 localhost charon: 16[IKE] received end entity cert "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost ipsec: 16[CFG] checking certificate status of "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost ipsec: 16[CFG] certificate status is not available
Apr 8 18:05:06 localhost charon: 16[CFG] using certificate "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost charon: 16[CFG] using trusted ca certificate "C=CN, O=StrongSwan, CN=StrongSwan CA"
Apr 8 18:05:06 localhost charon: 16[CFG] checking certificate status of "C=CN, O=StrongSwan, CN="
Apr 8 18:05:06 localhost charon: 16[CFG] certificate status is not available
Apr 8 18:05:06 localhost charon: 16[CFG] reached self-signed root ca with a path length of 0
Apr 8 18:05:06 localhost charon: 16[IKE] authentication of 'moon.strongswan.org' with RSA_EMSA_PKCS1_SHA2_256 successful
Apr 8 18:05:06 localhost charon: 16[IKE] IKE_SA home[1] established between 192.168.0.2[[email protected]]...192.168.0.1[moon.strongswan.org]
Apr 8 18:05:06 localhost charon: 16[IKE] scheduling rekeying in 14049s
Apr 8 18:05:06 localhost charon: 16[IKE] maximum IKE_SA lifetime 15489s
Apr 8 18:05:06 localhost charon: 16[CFG] selected proposal: ESP:AES_CBC_128/HMAC_SHA2_256_128/NO_EXT_SEQ
Apr 8 18:05:06 localhost charon: 16[KNL] firstly created, spd for G1/1 found sw_if_index is 1
Apr 8 18:05:07 localhost charon: 16[IKE] CHILD_SA home{1} established with SPIs c079e4f7_i c8e6f92e_o and TS 192.168.0.2/32 === 10.1.0.0/16
Apr 8 18:05:07 localhost charon: 16[IKE] peer supports MOBIKE
此时如果你查看vpp的配置应该可以看到ipsec相关的内容
[root@localhost home]# vppctl show ipsec all
[0] sa 1 (0x1) spi 4158945728 (0xf7e479c0) protocol:esp flags:[tunnel ]
[1] sa 2 (0x2) spi 788129480 (0x2ef9e6c8) protocol:esp flags:[tunnel ]
spd 1
ip4-outbound:
[1] priority 2147483647 action bypass type ip4-outbound protocol IPSEC_AH
local addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[3] priority 2147483647 action bypass type ip4-outbound protocol IPSEC_ESP
local addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[5] priority 2147483647 action bypass type ip4-outbound protocol UDP
local addr range 0.0.0.0 - 255.255.255.255 port range 500 - 500
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[7] priority 2147483647 action bypass type ip4-outbound protocol UDP
local addr range 0.0.0.0 - 255.255.255.255 port range 4500 - 4500
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[10] priority 2147480764 action protect type ip4-outbound protocol any sa 2
local addr range 192.168.0.2 - 192.168.0.2 port range 0 - 65535
remote addr range 10.1.0.0 - 10.1.255.255 port range 0 - 65535
packets 0 bytes 0
ip6-outbound:
ip4-inbound-protect:
[8] priority 2147480764 action protect type ip4-inbound-protect protocol any sa 1
local addr range 192.168.0.2 - 192.168.0.2 port range 0 - 65535
remote addr range 10.1.0.0 - 10.1.255.255 port range 0 - 65535
packets 0 bytes 0
[9] priority 2147480764 action protect type ip4-inbound-protect protocol any sa 1
local addr range 192.168.0.2 - 192.168.0.2 port range 0 - 65535
remote addr range 10.1.0.0 - 10.1.255.255 port range 0 - 65535
packets 0 bytes 0
ip6-inbound-protect:
ip4-inbound-bypass:
[0] priority 2147483647 action bypass type ip4-inbound-bypass protocol IPSEC_AH
local addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[2] priority 2147483647 action bypass type ip4-inbound-bypass protocol IPSEC_ESP
local addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[4] priority 2147483647 action bypass type ip4-inbound-bypass protocol UDP
local addr range 0.0.0.0 - 255.255.255.255 port range 500 - 500
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
[6] priority 2147483647 action bypass type ip4-inbound-bypass protocol UDP
local addr range 0.0.0.0 - 255.255.255.255 port range 4500 - 4500
remote addr range 0.0.0.0 - 255.255.255.255 port range 0 - 65535
packets 0 bytes 0
ip6-inbound-bypass:
SPD Bindings:
1 -> G1/1
[root@localhost home]# vppctl show ipsec sa detail
[0] sa 1 (0x1) spi 4158945728 (0xf7e479c0) protocol:esp flags:[tunnel ]
locks 3
salt 0x0
thread-indices [encrypt:-1 decrypt:-1]
seq 0 seq-hi 0
last-seq 0 last-seq-hi 0 window 0000000000000000000000000000000000000000000000000000000000000000
crypto alg aes-cbc-128 key [redacted]
integrity alg sha-256-128 key [redacted]
packets 0 bytes 0
table-ID 0 tunnel src 192.168.0.1 dst 192.168.0.2
resovle via fib-entry: 10
stacked on:
[@3]: dpo-load-balance: [proto:ip4 index:12 buckets:1 uRPF:13 to:[3:1773]]
[0] [@2]: dpo-receive: 192.168.0.2 on G1/1
[1] sa 2 (0x2) spi 788129480 (0x2ef9e6c8) protocol:esp flags:[tunnel ]
locks 2
salt 0x0
thread-indices [encrypt:-1 decrypt:-1]
seq 0 seq-hi 0
last-seq 0 last-seq-hi 0 window 0000000000000000000000000000000000000000000000000000000000000000
crypto alg aes-cbc-128 key [redacted]
integrity alg sha-256-128 key [redacted]
packets 0 bytes 0
table-ID 0 tunnel src 192.168.0.2 dst 192.168.0.1
resovle via fib-entry: 15
stacked on:
[@3]: dpo-load-balance: [proto:ip4 index:17 buckets:1 uRPF:18 to:[3:1884]]
[0] [@5]: ipv4 via 192.168.0.1 G1/1: mtu:9000 525400023faf5254008ce41c0800
查看vpp的fib表,也动态添加了对应的路由进去,例如在Roadwarrior场景中,客户端carol中自动添加的10.1.0.0/16的路由,通过192.168.0.1 G1/1出去
[root@localhost home]# vppctl show ip fib
ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] epoch:0 flags:none locks:[adjacency:1, default-route:1, nat-hi:2, ]
0.0.0.0/0
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:1 buckets:1 uRPF:0 to:[0:0]]
[0] [@0]: dpo-drop ip4
0.0.0.0/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:2 buckets:1 uRPF:1 to:[0:0]]
[0] [@0]: dpo-drop ip4
10.1.0.0/16
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:18 buckets:1 uRPF:20 to:[0:0]]
[0] [@5]: ipv4 via 192.168.0.1 G1/1: mtu:9000 525400023faf5254008ce41c0800
10.2.0.0/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:14 buckets:1 uRPF:15 to:[0:0]]
[0] [@0]: dpo-drop ip4
10.2.0.0/16
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:14 to:[0:0]]
[0] [@4]: ipv4-glean: G1/2: mtu:9000 ffffffffffff52540008713e0806
10.2.0.1/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:16 buckets:1 uRPF:19 to:[0:0]]
[0] [@2]: dpo-receive: 10.2.0.1 on G1/2
10.2.255.255/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:15 buckets:1 uRPF:17 to:[0:0]]
[0] [@0]: dpo-drop ip4
192.168.0.0/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:10 buckets:1 uRPF:9 to:[0:0]]
[0] [@0]: dpo-drop ip4
192.168.0.1/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:17 buckets:1 uRPF:18 to:[3:1884]]
[0] [@5]: ipv4 via 192.168.0.1 G1/1: mtu:9000 525400023faf5254008ce41c0800
192.168.0.0/24
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:9 buckets:1 uRPF:8 to:[1:108]]
[0] [@4]: ipv4-glean: G1/1: mtu:9000 ffffffffffff5254008ce41c0806
192.168.0.2/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:12 buckets:1 uRPF:13 to:[3:1773]]
[0] [@2]: dpo-receive: 192.168.0.2 on G1/1
192.168.0.255/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:11 buckets:1 uRPF:11 to:[0:0]]
[0] [@0]: dpo-drop ip4
224.0.0.0/4
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:4 buckets:1 uRPF:3 to:[0:0]]
[0] [@0]: dpo-drop ip4
240.0.0.0/4
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:3 buckets:1 uRPF:2 to:[0:0]]
[0] [@0]: dpo-drop ip4
255.255.255.255/32
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:5 buckets:1 uRPF:4 to:[0:0]]
[0] [@0]: dpo-drop ip4
如果是Roadwarrior场景我们在移动客户端carol ping 10.1.0.1可以成功ping通
vpp# ping 10.1.0.1
116 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=7.7229 ms
116 bytes from 10.1.0.1: icmp_seq=2 ttl=64 time=1.2671 ms
116 bytes from 10.1.0.1: icmp_seq=3 ttl=64 time=4.2904 ms
116 bytes from 10.1.0.1: icmp_seq=4 ttl=64 time=8.3667 ms
116 bytes from 10.1.0.1: icmp_seq=5 ttl=64 time=1.3370 ms
此时如果在中间抓包的话,应该看到的是ESP报文,我们查看vpp的节点统计,数据如下,说明IPSEC隧道建立成功了
vpp# show errors
Count Node Reason
5 ipsec4-output-feature IPSec policy protect
5 esp4-encrypt ESP pkts received
5 esp4-decrypt ESP pkts received
5 ipsec4-input-feature IPSEC pkts received
5 ipsec4-input-feature IPSEC pkts matched
5 ipsec4-output-feature IPSec policy bypass
5 esp4-encrypt ESP pkts received
同理,site-to-site的场景也可以通过这个方法来进行验证。更多的场景应用可以通过上面说的官方测试例的网站来进行搭建
上面的VPP startup.conf配置文件使用了openssl的加解密套件,但是如果想要更高的处理性能的话,需要使用DPDK的加解密套件。添加方式是将上面的startup.conf文件dpdk部分修改为下面的配置添加dpdk加密虚拟设备vdev crypto_aesni_mb
dpdk
{
log-level debug
huge-dir /dev/hugepages
vdev crypto_aesni_mb
dev 0000:00:06.0 { name G1/1 }
dev 0000:00:07.0 { name G1/2 }
}
添加完成之后,可以使用下面的命令查看
show dpdk crypto devices
show dpdk crypto
show ipsec backends
查看DPDK解加密设备是否加载
vpp# show dpdk crypto devices
crypto_aesni_mb crypto_aesni_mb up
numa_node 0, max_queues 8
SYMMETRIC_CRYPTO, SYM_OPERATION_CHAINING, CPU_AVX2, CPU_AESNI, OOP_LB_IN_LB_OUT
Cipher: aes-cbc-128, aes-cbc-192, aes-cbc-256, aes-ctr-128, aes-ctr-192, aes-ctr-256, aes-gcm-128, aes-gcm-192, aes-gcm-256
Auth: md5-96, sha1-96, sha-256-96, sha-256-128, sha-384-192, sha-512-256
enqueue 0 dequeue 0 enqueue_err 0 dequeue_err 0
free_resources 1 :
thr_id -1 qp 7 enc_inflight 0, dec_inflights 0
used_resources 7 :
thr_id 1 qp 0 enc_inflight 0, dec_inflights 0
thr_id 2 qp 1 enc_inflight 0, dec_inflights 0
thr_id 3 qp 2 enc_inflight 0, dec_inflights 0
thr_id 4 qp 3 enc_inflight 0, dec_inflights 0
thr_id 5 qp 4 enc_inflight 0, dec_inflights 0
thr_id 6 qp 5 enc_inflight 0, dec_inflights 0
thr_id 7 qp 6 enc_inflight 0, dec_inflights 0
show dpdk crypto placement
查看dpdk加解密设备绑定的线程,此处需要注意一点,如果VPP采用多线程工作模式的话,dpdk的加密设备是不会绑定在vpp_main主线程的,而且加解密处理入口节点dpdk-crypto-input
也只绑定在了工作线程。作为正常网关转发是可以工作的,因为进来的ipsec报文都会走到dpdk-crypto-input
节点处理,在工作线程处理,包含dpdk的解加密资源。
但是如果是类似于上面的操作,通过网关去直接ping对端的话,是无法通的,有如下报错
dpdk-esp4-encrypt Cipher/Auth not supported
查看/var/log/messages显示以下的log
dpdk_esp_encrypt_inline:247: unsupported SA by thread index 0
猜测可能是ping操作类似于协议和控制报文处理,在vpp_main主线程处理,vpp_main是没有分配dpdk的加解密资源的,所以ESP报文处理时,会报错主线程查找不到SA。猜测这是官方的IPSEC的一个BUG,没有考虑到此类场景。单线程工作模式不受影响。如果想要解决该问题,可以尝试修改代码,dpdk_ipsec_process
该函数中加密算法注册时,不进行skip_master操作,但是我没有尝试过。
vpp# show dpdk crypto placement
Thread 1 (vpp_wk_0):
crypto_aesni_mb dev-id 0 queue-pair 0
Thread 2 (vpp_wk_1):
crypto_aesni_mb dev-id 0 queue-pair 1
Thread 3 (vpp_wk_2):
crypto_aesni_mb dev-id 0 queue-pair 2
Thread 4 (vpp_wk_3):
crypto_aesni_mb dev-id 0 queue-pair 3
Thread 5 (vpp_wk_4):
crypto_aesni_mb dev-id 0 queue-pair 4
Thread 6 (vpp_wk_5):
crypto_aesni_mb dev-id 0 queue-pair 5
Thread 7 (vpp_wk_6):
crypto_aesni_mb dev-id 0 queue-pair 6
查看ipsec加密后端是否变成dpdk backend
vpp# show ipsec backends
IPsec AH backends available:
Name Index Active
crypto engine backend 0 yes
IPsec ESP backends available:
Name Index Active
crypto engine backend 0 no
dpdk backend 1 yes