Redhat安装yum并更换yum源

1.检查yum包 rpm -qa |grep yum 
2.删除自带包 
rpm -aq | grep yum | xargs rpm -e –nodeps 
3.再检查一下 
rpm -qa |grep yum 
4.下载更新包（http://mirrors.163.com/centos/6/os/x86_64/Packages/） 

一定要注意你的虚拟机是多少位的，32位的话选i386的包。
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/python-urlgrabber-3.9.1-11.el6.noarch.rpm 
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/yum-plugin-fastestmirror-1.1.30-40.el6.noarch.rpm 
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/yum-3.2.29-81.el6.centos.noarch.rpm 
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/yum-updateonboot-1.1.30-40.el6.noarch.rpm 
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/yum-metadata-parser-1.1.2-16.el6.x86_64.rpm 
wget http://mirrors.163.com/centos/6/os/x86_64/Packages/yum-utils-1.1.30-40.el6.noarch.rpm

5.执行安装 
rpm -ivh yum-* 
如果出现

error: Failed dependencies:
        python-urlgrabber >= 3.9.1-10 is needed by yum-3.2.29-73.el6.centos.noarch

• 1
• 2

不要慌，这个问题很恶心会导致后面安装前功尽弃，使用下面 
rpm -Uvh python-urlgrabber-3.9.1-11.el6.noarch.rpm 
更新rpm -Uvh python-urlgrabber版本，不更新肯定安装不过去 
在执行： 
rpm -ivh yum-*

warning: yum-3.2.29-73.el6.centos.noarch.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
Preparing...                ########################################### [100%]
   1:yum-metadata-parser    ########################################### [ 20%]
   2:yum-plugin-fastestmirro########################################### [ 40%]
   3:yum                    ########################################### [ 60%]
   4:yum-updateonboot       ########################################### [ 80%]
   5:yum-utils              ########################################### [100%]

• 1
• 2
• 3
• 4
• 5
• 6
• 7

安装成功了 
6.切换源 
cd /etc/yum.repos.d/ 
mv redhat.repo redhat.repo.bak 
mv rhel-source.repo rhel-source.repo.bak 
vi /etc/yum.repos.d/CentOS-Base.repo 
粘贴如下信息：

#CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-6 - Base - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=6&arch=$basearch&repo=os
baseurl=http://mirrors.163.com/centos/7/os/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-6.5

#released updates
[updates]
name=CentOS-6 - Updates - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=6&arch=$basearch&repo=updates
baseurl=http://mirrors.163.com/centos/7/updates/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-6.5

#additional packages that may be useful
[extras]
name=CentOS-6 - Extras - 163.com
#mirrorlist=http://mirrorlist.centos.org/?release=6&arch=$basearch&repo=extras
baseurl=http://mirrors.163.com/centos/7/extras/$basearch/
gpgcheck=1
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-6.5

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-6 - Plus - 163.com
baseurl=http://mirrors.163.com/centos/7/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.163.com/centos/RPM-GPG-KEY-CentOS-6.5

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15
• 16
• 17
• 18
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
• 30
• 31
• 32
• 33
• 34
• 35
• 36
• 37
• 38
• 39
• 40
• 41
• 42

8.清理缓存 
yum clean all

yum makecache

9.验证

yum install telnet

个人分类：  Linux