在OMNET++上安装INET FRAMEWORK框架
之前提到了omnetpp只是提供一个平台，具体的协议支持需要框架的支持。
下载了inet framework，安装过程中提示需要4.2版本以上的omnetpp，于是又下载了最新的omnetpp。
（安装4.2版本过程中最好关掉杀软）
./setenv
./configurate
make
ok！
之后把inet解压到omnet文件夹下，单独放在一个目录。用omnet控制台进到目录里:
make makefiles
make
cd examples
./rundemo
就可以看到基于这个框架的一些demo了。
wireless 802.11，正是我需要的！
HowToImportInet
This short Tutorial should help you to get the combination Omnet++ 4 (final) and INET (INET-20090325-opp4-src.tgz) working.
prerequisites:
- a working installation of Omnet++ Version 4.
- unpacked INET archive
Steps to go:
- open the IDE
- import the INET project (File -> Import -> General -> Existing Projects into Workspace -> Select
-> Check INET project -> Finish)
At his point you should be able to build the project with Ctrl-B.
Now do what you need/want to do. In my case i just created a new project and referenced the INET project in there
- File -> New -> Omnet++ Project for C++
- enter a name and confirm
- open project properties of your new project
- enable the INET checkbox in the project references and confirm
- use all the nice INET stuff in your project