5安装网络组件calico
安装前需要确认kubelet配置是否已经增加--network-plugin=cni
如果没有配置就加到kubelet配置文件里
Environment="KUBELET_NETWORK_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin
5.1先装rbac
官方URL
https://docs.projectcalico.org/v2.6/getting-started/kubernetes/installation/rbac.yaml
calico-rbac.yaml
# Calico Version v2.6.1 # https://docs.projectcalico.org/v2.6/releases#v2.6.1 --- kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-kube-controllers namespace: kube-system rules: - apiGroups: - "" - extensions resources: - pods - namespaces - networkpolicies verbs: - watch - list --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-kube-controllers roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-kube-controllers subjects: - kind: ServiceAccount name: calico-kube-controllers namespace: kube-system --- kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-node namespace: kube-system rules: - apiGroups: [""] resources: - pods - nodes verbs: - get --- apiVersion: rbac.authorization.k8s.io/v1beta1 kind: ClusterRoleBinding metadata: name: calico-node roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-node subjects: - kind: ServiceAccount name: calico-node namespace: kube-system
5.2 创建calico.yaml
官方URL
https://docs.projectcalico.org/v2.6/getting-started/kubernetes/installation/hosted/calico.yaml
配置修改请看下面的参数说明
# Calico Version v2.6.1
# https://docs.projectcalico.org/v2.6/releases#v2.6.1
# This manifest includes the following component versions:
# calico/node:v2.6.1
# calico/cni:v1.11.0
# calico/kube-controllers:v1.0.0
# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
name: calico-config
namespace: kube-system
data:
# Configure this with the location of your etcd cluster.
etcd_endpoints: " :2379"
# Configure the Calico backend to use.
calico_backend: "bird"
# The CNI network configuration to install on each node.
cni_network_config: |-
{
"name": "k8s-pod-network",
"cniVersion": "0.1.0",
"type": "calico",
"etcd_endpoints": "__ETCD_ENDPOINTS__",
"etcd_key_file": "__ETCD_KEY_FILE__",
"etcd_cert_file": "__ETCD_CERT_FILE__",
"etcd_ca_cert_file": "__ETCD_CA_CERT_FILE__",
"log_level": "info",
"mtu": 1500,
"ipam": {
"type": "calico-ipam"
},
"policy": {
"type": "k8s",
"k8s_api_root": "https://__KUBERNETES_SERVICE_HOST__:__KUBERNETES_SERVICE_PORT__",
"k8s_auth_token": "__SERVICEACCOUNT_TOKEN__"
},
"kubernetes": {
"kubeconfig": "__KUBECONFIG_FILEPATH__"
}
}
# If you're using TLS enabled etcd uncomment the following.
# You must also populate the Secret below with these files.
etcd_ca: "" # "/calico-secrets/etcd-ca"
etcd_cert: "" # "/calico-secrets/etcd-cert"
etcd_key: "" # "/calico-secrets/etcd-key"
---
# The following contains k8s Secrets for use with a TLS enabled etcd cluster.
# For information on populating Secrets, see http://kubernetes.io/docs/user-guide/secrets/
apiVersion: v1
kind: Secret
type: Opaque
metadata:
name: calico-etcd-secrets
namespace: kube-system
data:
# Populate the following files with etcd TLS configuration if desired, but leave blank if
# not using TLS for etcd.
# This self-hosted install expects three files with the following names. The values
# should be base64 encoded strings of the entire contents of each file.
# etcd-key: null
# etcd-cert: null
# etcd-ca: null
---
# This manifest installs the calico/node container, as well
# as the Calico CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
name: calico-node
namespace: kube-system
labels:
k8s-app: calico-node
spec:
selector:
matchLabels:
k8s-app: calico-node
template:
metadata:
labels:
k8s-app: calico-node
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
scheduler.alpha.kubernetes.io/tolerations: |
[{"key": "dedicated", "value": "master", "effect": "NoSchedule" },
{"key":"CriticalAddonsOnly", "operator":"Exists"}]
spec:
hostNetwork: true
serviceAccountName: calico-node
containers:
# Runs calico/node container on each Kubernetes node. This
# container programs network policy and routes on each
# host.
- name: calico-node
p_w_picpath: quay.io/calico/node:v2.6.1
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
# Choose the backend to use.
- name: CALICO_NETWORKING_BACKEND
valueFrom:
configMapKeyRef:
name: calico-config
key: calico_backend
# Cluster type to identify the deployment type
- name: CLUSTER_TYPE
value: "k8s,bgp"
# Disable file logging so `kubectl logs` works.
- name: CALICO_DISABLE_FILE_LOGGING
value: "true"
# Set Felix endpoint to host default action to ACCEPT.
- name: FELIX_DEFAULTENDPOINTTOHOSTACTION
value: "ACCEPT"
# Configure the IP Pool from which Pod IPs will be chosen.
- name: CALICO_IPV4POOL_CIDR
value: "192.168.0.0/16"
- name: CALICO_IPV4POOL_IPIP
value: "always"
# Disable IPv6 on Kubernetes.
- name: FELIX_IPV6SUPPORT
value: "false"
# Set Felix logging to "info"
- name: FELIX_LOGSEVERITYSCREEN
value: "info"
# Set MTU for tunnel device used if ipip is enabled
- name: FELIX_IPINIPMTU
value: "1440"
# Auto-detect the BGP IP address.
- name: IP
value: "autodetect"
- name: IP_AUTODETECTION_METHOD
value: "can-reach=www.baidu.com"
- name: FELIX_HEALTHENABLED
value: "true"
securityContext:
privileged: true
resources:
requests:
cpu: 250m
livenessProbe:
httpGet:
path: /liveness
port: 9099
periodSeconds: 10
initialDelaySeconds: 10
failureThreshold: 6
readinessProbe:
httpGet:
path: /readiness
port: 9099
periodSeconds: 10
volumeMounts:
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- mountPath: /var/run/calico
name: var-run-calico
readOnly: false
- mountPath: /calico-secrets
name: etcd-certs
# This container installs the Calico CNI binaries
# and CNI network config file on each node.
- name: install-cni
p_w_picpath: quay.io/calico/cni:v1.11.0
command: ["/install-cni.sh"]
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
# The CNI network config to install on each node.
- name: CNI_NETWORK_CONFIG
valueFrom:
configMapKeyRef:
name: calico-config
key: cni_network_config
volumeMounts:
- mountPath: /host/opt/cni/bin
name: cni-bin-dir
- mountPath: /host/etc/cni/net.d
name: cni-net-dir
- mountPath: /calico-secrets
name: etcd-certs
volumes:
# Used by calico/node.
- name: lib-modules
hostPath:
path: /lib/modules
- name: var-run-calico
hostPath:
path: /var/run/calico
# Used to install CNI.
- name: cni-bin-dir
hostPath:
path: /opt/cni/bin
- name: cni-net-dir
hostPath:
path: /etc/cni/net.d
# Mount in the etcd TLS secrets.
- name: etcd-certs
secret:
secretName: calico-etcd-secrets
---
# This manifest deploys the Calico Kubernetes controllers.
# See https://github.com/projectcalico/kube-controllers
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
scheduler.alpha.kubernetes.io/tolerations: |
[{"key": "dedicated", "value": "master", "effect": "NoSchedule" },
{"key":"CriticalAddonsOnly", "operator":"Exists"}]
spec:
# The controllers can only have a single active instance.
replicas: 1
strategy:
type: Recreate
template:
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
# The controllers must run in the host network namespace so that
# it isn't governed by policy that would prevent it from working.
hostNetwork: true
serviceAccountName: calico-kube-controllers
containers:
- name: calico-kube-controllers
p_w_picpath: quay.io/calico/kube-controllers:v1.0.0
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
---
# This deployment turns off the old "policy-controller". It should remain at 0 replicas, and then
# be removed entirely once the new kube-controllers deployment has been deployed above.
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: calico-policy-controller
namespace: kube-system
labels:
k8s-app: calico-policy
spec:
# Turn this deployment off in favor of the kube-controllers deployment above.
replicas: 0
strategy:
type: Recreate
template:
metadata:
name: calico-policy-controller
namespace: kube-system
labels:
k8s-app: calico-policy
spec:
hostNetwork: true
serviceAccountName: calico-kube-controllers
containers:
- name: calico-policy-controller
p_w_picpath: quay.io/calico/kube-controllers:v1.0.0
env:
# The location of the Calico etcd cluster.
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-kube-controllers
namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-node
namespace: kube-system
参数说明：
etcd_endpoints
改为你自己的etcd集群CALICO_IPV4POOL_CIDR
calico的IP池，不要和集群的cidr，以及机器的其他IP段冲突，比如用：10.10.0.0/16IP Autodetection methods
机器多网卡的时候，安装calico-node会报错，因为calico默认IP的获取方式是first-found，这个ip可能不是你需要的那个。导致网络不成功，导致注册失败
#calico报错日志 Skipping datastore connection test IPv4 address 10.96.0.1 discovered on interface kube-ipvs0 No AS number configured on node resource, using global value
需要修改calico.yaml,修改IP的获取方式为autodetect,注意顺序,修改如下
- name: IP value: "autodetect" - name: IP_AUTODETECTION_METHOD value: "can-reach=www.baidu.com"
IP_AUTODETECTION_METHOD 参数说明
官方文档URL:https://docs.projectcalico.org/v2.6/reference/node/configuration
使用通过ip访问的interface
can-reach=61.135.169.121使用通过域名访问的interface
can-reach=www.baidu.com使用指定的interface
interface=ethx
此时node都应该处于Ready状态
[root@kvm-master network]# kubectl get nodes NAME STATUS ROLES AGE VERSION node2 Ready23h v1.8.0 node1 Ready 1d v1.8.0
5.3 安装calicoctl管理calico网络
calicoctl.yaml
# Calico Version v2.6.1 # https://docs.projectcalico.org/v2.6/releases#v2.6.1 # This manifest includes the following component versions: # calico/ctl:v1.6.1 apiVersion: v1 kind: Pod metadata: name: calicoctl namespace: kube-system spec: hostNetwork: true containers: - name: calicoctl p_w_picpath: quay.io/calico/ctl:v1.6.1 command: ["/bin/sh", "-c", "while true; do sleep 3600; done"] env: - name: ETCD_ENDPOINTS valueFrom: configMapKeyRef: name: calico-config key: etcd_endpoints
注意：calicoctl以pod形式运行时，无法使用calicoctl node 命令