kubeadm安装k8s集群
1.准备
1.1 系统准备：
cat /etc/hosts
10.211.55.3 node1
10.211.55.5 node2
关闭防火墙：
systemctl stop firewalld
systemctl disable firewalld
禁用SELINUX：
setenforce 0
vi /etc/selinux/config
SELINUX=disabled
创建/etc/sysctl.d/k8s.conf文件，添加如下内容：
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
执行命令使修改生效。
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf
1.2kube-proxy开启ipvs的前置条件
由于ipvs已经加入到了内核的主干，所以为kube-proxy开启ipvs的前提需要加载以下的内核模块：
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4
在所有的Kubernetes节点node1和node2上执行以下脚本:
cat > /etc/sysconfig/modules/ipvs.modules <上面脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。 使用
lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。
接下来还需要确保各个节点上已经安装了ipset软件包yum install ipset。 为了便于查看ipvs的代理规则，最好安装一下管理工具ipvsadm yum install ipvsadm。
1.3安装Docker
Kubernetes从1.6开始使用CRI(Container Runtime Interface)容器运行时接口。默认的容器运行时仍然是Docker，使用的是kubelet中内置dockershim CRI实现。
安装docker的yum源:
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager \
--add-repo \
https://download.docker.com/linux/centos/docker-ce.repo
查看最新的Docker版本：
yum list docker-ce.x86_64 --showduplicates |sort -r
docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.1.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.0.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 18.03.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.3.ce-1.el7 docker-ce-stable
docker-ce.x86_64 17.03.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.0.ce-1.el7.centos docker-ce-stable
Kubernetes 1.12已经针对Docker的1.11.1, 1.12.1, 1.13.1, 17.03, 17.06, 17.09, 18.06等版本做了验证，需要注意Kubernetes 1.12最低支持的Docker版本是1.11.1。Kubernetes 1.13对Docker的版本依赖方面没有变化。 我们这里在各节点安装docker的18.06.1版本。
yum makecache fast
yum install -y --setopt=obsoletes=0 \
docker-ce-18.06.1.ce-3.el7
systemctl start docker
systemctl enable docker
确认一下iptables filter表中FOWARD链的默认策略(pllicy)为ACCEPT。
iptables -nvL
Chain INPUT (policy ACCEPT 263 packets, 19209 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DOCKER-USER all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 DOCKER-ISOLATION-STAGE-1 all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * docker0 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
0 0 DOCKER all -- * docker0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- docker0 !docker0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- docker0 docker0 0.0.0.0/0 0.0.0.0/0
Docker从1.13版本开始调整了默认的防火墙规则，禁用了iptables filter表中FOWARD链，这样会引起Kubernetes集群中跨Node的Pod无法通信。但这里通过安装docker 1806，发现默认策略又改回了ACCEPT，这个不知道是从哪个版本改回的，因为我们线上版本使用的1706还是需要手动调整这个策略的。
2.使用kubeadm部署Kubernetes
2.1 安装kubeadm和kubelet
下面在各节点安装kubeadm和kubelet：
cat < /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
yum makecache fast
yum install -y kubelet kubeadm kubectl
...
Installed:
kubeadm.x86_64 0:1.13.0-0 kubectl.x86_64 0:1.13.0-0 kubelet.x86_64 0:1.13.0-0
Dependency Installed:
cri-tools.x86_64 0:1.12.0-0 kubernetes-cni.x86_64 0:0.6.0-0 socat.x86_64 0:1.7.3.2-2.el7
- 从安装结果可以看出还安装了cri-tools, kubernetes-cni, socat三个依赖：
-
- 官方从Kubernetes 1.9开始就将cni依赖升级到了0.6.0版本，在当前1.12中仍然是这个版本
- socat是kubelet的依赖
- cri-tools是CRI(Container Runtime Interface)容器运行时接口的命令行工具
由于国内科学上网原因= =不是下不成功的！！
以下提供两种解决方式：
第一种：
1.手动拉取：
docker pull mirrorgooglecontainers/kube-apiserver-amd64:v1.13.0
docker pull mirrorgooglecontainers/kube-controller-manager-amd64:v1.13.0
docker pull mirrorgooglecontainers/kube-scheduler-amd64:v1.13.0
docker pull mirrorgooglecontainers/kube-proxy-amd64:v1.13.0
docker pull mirrorgooglecontainers/pause:3.1
docker pull mirrorgooglecontainers/etcd-amd64:3.2.24
docker pull coredns/coredns:1.2.6
2.改tag
docker tag mirrorgooglecontainers/kube-apiserver-amd64:v1.13.0 k8s.gcr.io/kube-apiserver:v1.13.0
docker tag mirrorgooglecontainers/kube-controller-manager-amd64:v1.13.0 k8s.gcr.io/kube-controller-manager:v1.13.0
docker tag mirrorgooglecontainers/kube-scheduler-amd64:v1.13.0 k8s.gcr.io/kube-scheduler:v1.13.0
docker tag mirrorgooglecontainers/kube-proxy-amd64:v1.13.0 k8s.gcr.io/kube-proxy:v1.13.0
docker tag mirrorgooglecontainers/pause:3.1 k8s.gcr.io/pause:3.1
docker tag mirrorgooglecontainers/etcd-amd64:3.2.24 k8s.gcr.io/etcd:3.2.24
docker tag coredns/coredns:1.2.6 k8s.gcr.io/coredns:1.2.6
3.删除不必要的镜像
docker rmi mirrorgooglecontainers/kube-apiserver-amd64:v1.13.0
docker rmi mirrorgooglecontainers/kube-controller-manager-amd64:v1.13.0
docker rmi mirrorgooglecontainers/kube-scheduler-amd64:v1.13.0
docker rmi mirrorgooglecontainers/kube-proxy-amd64:v1.13.0
docker rmi mirrorgooglecontainers/pause:3.1
docker rmi mirrorgooglecontainers/etcd-amd64:3.2.24
docker rmi coredns/coredns:1.2.6
第二种：
我已经把所有要用的镜像打成tar包并扔到了百度网盘= =你也可以直接下载
链接:https://pan.baidu.com/s/1OReqvvh7ru8BENLxpwjq8g 密码:5cmz
加载镜像eg：docker load < etcd.tar
运行kubelet –help可以看到原来kubelet的绝大多数命令行flag参数都被DEPRECATED了，如：
......
--address 0.0.0.0 The IP address for the Kubelet to serve on (set to 0.0.0.0 for all IPv4 interfaces and `::` for all IPv6 interfaces) (default 0.0.0.0) (DEPRECATED: This parameter should be set via the config file specified by the Kubelet's --config flag. See https://kubernetes.io/docs/tasks/administer-cluster/kubelet-config-file/ for more information.)
......
而官方推荐我们使用–config指定配置文件，并在配置文件中指定原来这些flag所配置的内容。这也是Kubernetes为了支持动态Kubelet配置（Dynamic Kubelet Configuration）才这么做的。
kubelet的配置文件必须是json或yaml格式。
Kubernetes 1.8开始要求关闭系统的Swap，如果不关闭，默认配置下kubelet将无法启动。
关闭系统的Swap方法如下:
swapoff -a
修改vim /etc/fstab 文件，注释掉 SWAP 的自动挂载，使用free -m确认swap已经关闭。 swappiness参数调整，修改vim /etc/sysctl.d/k8s.conf添加下面一行：
vm.swappiness=0
执行sysctl -p /etc/sysctl.d/k8s.conf使修改生效。
因为这里本次用于测试两台主机上还运行其他服务，关闭swap可能会对其他服务产生影响，所以这里修改kubelet的配置去掉这个限制。 之前的Kubernetes版本我们都是通过kubelet的启动参数–fail-swap-on=false去掉这个限制的。前面已经分析了Kubernetes不再推荐使用启动参数，而推荐使用配置文件。 所以这里我们改成配置文件配置的形式。
修改vim /etc/sysconfig/kubelet，加入：
KUBELET_EXTRA_ARGS=--fail-swap-on=false
2.2 使用kubeadm init初始化集群
在各节点开机启动kubelet服务：
systemctl enable kubelet.service
接下来使用kubeadm初始化集群，选择node1作为Master Node，在node1上执行下面的命令：
kubeadm init \
--kubernetes-version=v1.13.0 \
--pod-network-cidr=10.244.0.0/16 \
--apiserver-advertise-address=10.211.55.3
因为我们选择flannel作为Pod网络插件，所以上面的命令指定–pod-network-cidr=10.244.0.0/16。
如果上面的命令报swap的错误，则执行：
kubeadm init \
--kubernetes-version=v1.13.0 \
--pod-network-cidr=10.244.0.0/16 \
--apiserver-advertise-address=10.211.55.3 \
--ignore-preflight-errors=Swap
[init] Using Kubernetes version: v1.13.0
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [node1 localhost] and IPs [10.211.55.3 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [node1 localhost] and IPs [10.211.55.3 127.0.0.1 ::1]
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [node1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.211.55.3]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 20.004467 seconds
[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.13" in namespace kube-system with the configuration for the kubelets in the cluster
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "node1" as an annotation
[mark-control-plane] Marking the node node1 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node node1 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: vipci2.zme5oa4vwmd9gfed
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 10.211.55.3:6443 --token vipci2.zme5oa4vwmd9gfed --discovery-token-ca-cert-hash sha256:02ba267d1d9118ce795625dcd3a00cf55612ddfc4bd10b25452c9fe5daae6890
上面记录了完成的初始化输出的内容，根据输出的内容基本上可以看出手动初始化安装一个Kubernetes集群所需要的关键步骤。
其中有以下关键内容：
- [kubelet-start] 生成kubelet的配置文件”/var/lib/kubelet/config.yaml”
- [certificates]生成相关的各种证书
- [kubeconfig]生成相关的kubeconfig文件
- [bootstraptoken]生成token记录下来，后边使用kubeadm join往集群中添加节点时会用到
- 下面的命令是配置常规用户如何使用kubectl访问集群：
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
-
最后给出了将节点加入集群的命令
kubeadm join 10.211.55.3:6443 --token vipci2.zme5oa4vwmd9gfed --discovery-token-ca-cert-hash sha256:02ba267d1d9118ce795625dcd3a00cf55612ddfc4bd10b25452c9fe5daae6890
查看一下集群状态：
kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy {"health": "true"}
确认个组件都处于healthy状态。
集群初始化如果遇到问题，可以使用下面的命令进行清理：
kubeadm reset
ifconfig cni0 down
ip link delete cni0
ifconfig flannel.1 down
ip link delete flannel.1
rm -rf /var/lib/cni/
2.3 安装Pod Network
接下来安装flannel network add-on：
mkdir -p ~/k8s/
cd ~/k8s
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml kubectl create -f kube-flannel.yml
clusterrole.rbac.authorization.k8s.io/flannel created clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created configmap/kube-flannel-cfg created
daemonset.extensions/kube-flannel-ds-amd64 created
daemonset.extensions/kube-flannel-ds-arm64 created
daemonset.extensions/kube-flannel-ds-arm created
daemonset.extensions/kube-flannel-ds-ppc64le created
daemonset.extensions/kube-flannel-ds-s390x created
Ps: kube-flannel.yml在上面给出的网盘中也有
这里注意kube-flannel.yml这个文件里的flannel的镜像是0.10.0，quay.io/coreos/flannel:v0.10.0-amd64
如果Node有多个网卡的话，目前需要在kube-flannel.yml中使用–iface参数指定集群主机内网网卡的名称，否则可能会出现dns无法解析。需要将kube-flannel.yml下载到本地，flanneld启动参数加上--iface=
......
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.10.0-amd64
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
- --iface=eth0
......
使用kubectl get pod –all-namespaces -o wide确保所有的Pod都处于Running状态。
2.4 master node参与工作负载
使用kubeadm初始化的集群，出于安全考虑Pod不会被调度到Master Node上，也就是说Master Node不参与工作负载。这是因为当前的master节点node1被打上了node-role.kubernetes.io/master:NoSchedule的污点：
kubectl describe node node1 | grep Taint Taints:
node-role.kubernetes.io/master:NoSchedule
因为这里搭建的是测试环境，去掉这个污点使node1参与工作负载：
kubectl taint nodes node1 node-role.kubernetes.io/master-
node "node1" untainted
2.5 测试DNS
kubectl run curl --image=radial/busyboxplus:curl -it
kubectl run --generator=deployment/apps.v1beta1 is DEPRECATED and will be removed in a future version. Use kubectl create instead.
If you don't see a command prompt, try pressing enter.
[ root@curl-5cc7b478b6-r997p:/ ]$
进入后执行nslookup kubernetes.default确认解析正常:
nslookup kubernetes.default
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local
2.6 向Kubernetes集群中添加Node节点
下面我们将node2这个主机添加到Kubernetes集群中，因为我们同样在node2上的kubelet的启动参数中去掉了必须关闭swap的限制，所以同样需要–ignore-preflight-errors=Swap这个参数。 在node2上执行:
kubeadm join 10.211.55.3:6443 --token vipci2.zme5oa4vwmd9gfed --discovery-token-ca-cert-hash sha256:02ba267d1d9118ce795625dcd3a00cf55612ddfc4bd10b25452c9fe5daae6890 --ignore-preflight-errors=Swap
node2加入集群很是顺利，下面在master节点上执行命令查看集群中的节点：
kubectl get nodes
NAME STATUS ROLES AGE VERSION
node1 Ready master 16m v1.13.0
node2 Ready 4m5s v1.13.0
如何从集群中移除Node
如果需要从集群中移除node2这个Node执行下面的命令：
在master节点上执行：
kubectl drain node2 --delete-local-data --force --ignore-daemonsets
kubectl delete node node2
在node2上执行：
kubeadm reset
ifconfig cni0 down
ip link delete cni0
ifconfig flannel.1 down
ip link delete flannel.1
rm -rf /var/lib/cni/
在node1上执行：
kubectl delete node node2
2.7 kube-proxy开启ipvs
修改ConfigMap的kube-system/kube-proxy中的config.conf，mode: “ipvs”：
kubectl edit cm kube-proxy -n kube-system
之后重启各个节点上的kube-proxy pod：
kubectl get pod -n kube-system | grep kube-proxy | awk '{system("kubectl delete pod "$1" -n kube-system")}'
kubectl get pod -n kube-system | grep kube-proxy
kube-proxy-lbk5w 1/1 Running 0 9s
kube-proxy-wqt7t 1/1 Running 0 14s
日志中打印出了Using ipvs Proxier，说明ipvs模式已经开启。
3.Kubernetes常用组件部署
越来越多的公司和团队开始使用Helm这个Kubernetes的包管理器，我们也将使用Helm安装Kubernetes的常用组件。
3.1 Helm的安装
Helm由客户端命helm令行工具和服务端tiller组成，Helm的安装十分简单。 下载helm命令行工具到master节点node1的/usr/local/bin下，这里下载的2.12.0版本：
wget https://storage.googleapis.com/kubernetes-helm/helm-v2.12.0-linux-amd64.tar.gz
tar -zxvf helm-v2.12.0-linux-amd64.tar.gz
cd linux-amd64/
cp helm /usr/local/bin/
为了安装服务端tiller，还需要在这台机器上配置好kubectl工具和kubeconfig文件，确保kubectl工具可以在这台机器上访问apiserver且正常使用。 这里的node1节点以及配置好了kubectl。
因为Kubernetes APIServer开启了RBAC访问控制，所以需要创建tiller使用的service account: tiller并分配合适的角色给它。 这里简单起见直接分配cluster-admin这个集群内置的ClusterRole给它。创建rbac-config.yaml文件：
apiVersion: v1
kind: ServiceAccount
metadata:
name: tiller
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
name: tiller
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: cluster-admin
subjects:
- kind: ServiceAccount
name: tiller
namespace: kube-system
kubectl create -f rbac-config.yaml
serviceaccount/tiller created
clusterrolebinding.rbac.authorization.k8s.io/tiller created
接下来使用helm部署tiller:
手动拉镜像（如果失效网盘中有镜像）：
docker pull sapcc/tiller:v2.12.0
docker tag sapcc/tiller:v2.12.0 gcr.io/kubernetes-helm/tiller:v2.12.0
helm init --service-account tiller --skip-refresh
Creating /root/.helm
Creating /root/.helm/repository
Creating /root/.helm/repository/cache
Creating /root/.helm/repository/local
Creating /root/.helm/plugins
Creating /root/.helm/starters
Creating /root/.helm/cache/archive
Creating /root/.helm/repository/repositories.yaml
Adding stable repo with URL: https://kubernetes-charts.storage.googleapis.com
Adding local repo with URL: http://127.0.0.1:8879/charts
$HELM_HOME has been configured at /root/.helm.
Tiller (the Helm server-side component) has been installed into your Kubernetes Cluster.
Please note: by default, Tiller is deployed with an insecure 'allow unauthenticated users' policy.
To prevent this, run `helm init` with the --tiller-tls-verify flag.
For more information on securing your installation see: https://docs.helm.sh/using_helm/#securing-your-helm-installation
Happy Helming!
tiller默认被部署在k8s集群中的kube-system这个namespace下：
kubectl get pod -n kube-system -l app=helm
NAME READY STATUS RESTARTS AGE
tiller-deploy-c4fd4cd68-dwkhv 1/1 Running 0 83s
helm version
Client: &version.Version{SemVer:"v2.12.0", GitCommit:"d325d2a9c179b33af1a024cdb5a4472b6288016a", GitTreeState:"clean"}
Server: &version.Version{SemVer:"v2.12.0", GitCommit:"d325d2a9c179b33af1a024cdb5a4472b6288016a", GitTreeState:"clean"}
3.2 使用Helm部署Nginx Ingress
为了便于将集群中的服务暴露到集群外部，从集群外部访问，接下来使用Helm将Nginx Ingress部署到Kubernetes上。 Nginx Ingress Controller被部署在Kubernetes的边缘节点上
我们将node1(10.211.55.3)和node2(10.211.55.5)同时做为边缘节点，打上Label：
kubectl label node node1 node-role.kubernetes.io/edge= node/node1 labeled
kubectl label node node2 node-role.kubernetes.io/edge= node/node2 labeled
kubectl get node NAME
STATUS ROLES AGE VERSION
node1 Ready edge,master 24m v1.13.0
node2 Ready edge 11m v1.13.0
stable/nginx-ingress chart的值文件ingress-nginx.yaml：
controller:
replicaCount: 2
service:
externalIPs:
- 10.211.55.1
nodeSelector:
node-role.kubernetes.io/edge: ''
affinity:
podAntiAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
- labelSelector:
matchExpressions:
- key: app
operator: In
values:
- nginx-ingress
- key: component
operator: In
values:
- controller
topologyKey: kubernetes.io/hostname
tolerations:
- key: node-role.kubernetes.io/master
operator: Exists
effect: NoSchedule
defaultBackend:
nodeSelector:
node-role.kubernetes.io/edge: ''
tolerations:
- key: node-role.kubernetes.io/master
operator: Exists
effect: NoSchedule
nginx ingress controller的副本数replicaCount为2，将被调度到node1和node2这两个边缘节点上。externalIPs指定的10.211.55.1为VIP，将绑定到kube-proxy kube-ipvs0网卡上。
helm repo update
helm install stable/nginx-ingress \
-n nginx-ingress \
--namespace ingress-nginx \
-f ingress-nginx.yaml
kubectl get pod -n ingress-nginx -o wide
如果访问http://10.211.55.1返回default backend，则部署完成。
ps：在下一篇中将会写dashboard的部署，在未来还会更新prometheus+grafana的监控系统，这些的镜像我都已经打成tar包并放在上面给出的网盘里了，有需要可以先行下载！