Juniper链路及接口配置

物理接口IP配置

interfaces {             xe-0/0/0 {                             unit 0 {             family inet {                 address addr/mask             }         }

 

 

汇聚端口IP配置

chassis {     aggregated-devices {           //配置汇聚接口数量         ethernet {             device-count 15;                 }   interfaces {                      //将接口xe-0/0/0和xe-0/0/1添加到汇聚接口ae0中     xe-0/0/0 {         gigether-options {             802.3ad ae0;         }     }     xe-0/0/1 {                                  gigether-options {             802.3ad ae0;         }     }       ae0 {                       //配置汇聚接口IP         unit 0 {             family inet {                 address addr/mask;             }         }     }

 

二层物理接口配置

interfaces { xe-0/0/0 {                              //将接口配置成trunk，并允许透传vlan100          unit 0 {             family ethernet-switching {                 port-mode trunk;                 vlan {                     members vlan100;                 }             }       vlan {                                //配置三层RVI接口vlan.100的ip地址         unit 100 {             family inet {                 address addr/mask;             }         }     } } vlans {     vlan100 {                          //配置vlan100，并绑定三层接口vlan.100         vlan-id 100;         l3-interface vlan.100;     } }