adb shell monkey
-p com.android.recorder
--throttle 360
--ignore-crashes
--monitor-native-crashes
--ignore-security-exceptions
--ignore-timeouts
--ignore-native-crashes
--pct-syskeys 10
--pct-nav 20
--pct-majornav 20
--pct-touch 40
--pct-appswitch 10
-v -v -v 20000
*#*#3646633#*#* mtklogger
ci@clinux:~/mp_mtk$ adb shell monkey --help
** Error: Unknown option: --help
usage: monkey [-p ALLOWED_PACKAGE [-p ALLOWED_PACKAGE] ...]
[-c MAIN_CATEGORY [-c MAIN_CATEGORY] ...]
[--ignore-crashes] [--ignore-timeouts]
[--ignore-security-exceptions]
[--monitor-native-crashes] [--ignore-native-crashes]
[--kill-process-after-error] [--hprof]
[--pct-touch PERCENT] [--pct-motion PERCENT]
[--pct-trackball PERCENT] [--pct-syskeys PERCENT]
[--pct-nav PERCENT] [--pct-majornav PERCENT]
[--pct-appswitch PERCENT] [--pct-flip PERCENT]
[--pct-anyevent PERCENT] [--pct-pinchzoom PERCENT]
[--pkg-blacklist-file PACKAGE_BLACKLIST_FILE]
[--pkg-whitelist-file PACKAGE_WHITELIST_FILE]
[--wait-dbg] [--dbg-no-events]
[--setup scriptfile] [-f scriptfile [-f scriptfile] ...]
[--port port]
[-s SEED] [-v [-v] ...]
[--throttle MILLISEC] [--randomize-throttle]
[--profile-wait MILLISEC]
[--device-sleep-time MILLISEC]
[--randomize-script]
[--script-log]
[--bugreport]
[--periodic-bugreport]
COUNT
ci@clinux:~/mp_mtk$
adb shell monkey
-p com.letv.android.recorder
--throttle 360
--ignore-crashes
--monitor-native-crashes
--ignore-security-exceptions
--ignore-timeouts
--ignore-native-crashes
--pct-syskeys 10
--pct-nav 20
--pct-majornav 20
--pct-touch 40
--pct-appswitch 10
-v -v -v 20000
adb shell monkey -p com.letv.android.recorder --throttle 360 --ignore-crashes --monitor-native-crashes --ignore-security-exceptions --ignore-timeouts --ignore-native-crashes --pct-syskeys 10 --pct-nav 20 --pct-majornav 20 --pct-touch 40 --pct-appswitch 10 -v -v -v 20000
| Category | Option | Description |
|---|---|---|
| General | --help |
Prints a simple usage guide. |
-v |
Each -v on the command line will increment the verbosity level. Level 0 (the default) provides little information beyond startup notification, test completion, and final results. Level 1 provides more details about the test as it runs, such as individual events being sent to your activities. Level 2 provides more detailed setup information such as activities selected or not selected for testing. 命令行的每一个-v将增加反馈信息的级别。Level 0(缺省值)除启动提示、测试完成和最终结果之外，提供较少信息。Level 1提供较为详细的测试信息，如逐个发送到Activity的事件。Level 2提供更加详细的设置信息，如测试中被选中的或未被选中的Activity。
|
|
| Events | -s |
Seed value for pseudo-random number generator. If you re-run the Monkey with the same seed value, it will generate the same sequence of events. 产生随机事件的种子,相同的值产生相同的事件序列 |
--throttle |
Inserts a fixed delay between events. You can use this option to slow down the Monkey. If not specified, there is no delay and the events are generated as rapidly as possible. 设置两次事件之间的事件间隔.通过这个参数降低速度,如果不指定该参数,系统会尽可能快的发送事件 |
|
--pct-touch |
Adjust percentage of touch events. (Touch events are a down-up event in a single place on the screen.) 调整设置触摸事件的百分比 |
|
--pct-motion |
Adjust percentage of motion events. (Motion events consist of a down event somewhere on the screen, a series of pseudo-random movements, and an up event.) 调整设置滑动事件的百分比 |
|
--pct-trackball |
Adjust percentage of trackball events. (Trackball events consist of one or more random movements, sometimes followed by a click.) 调整设置轨迹球事件的百分比 |
|
--pct-nav |
Adjust percentage of "basic" navigation events. (Navigation events consist of up/down/left/right, as input from a directional input device.) 调整设置导航事件 up/down/left/right）百分比 |
|
--pct-majornav |
Adjust percentage of "major" navigation events. (These are navigation events that will typically cause actions within your UI, such as the center button in a 5-way pad, the back key, or the menu key.) 调整设置(主要导航事件 back key 、 menu key）百分比 |
|
--pct-syskeys |
Adjust percentage of "system" key events. (These are keys that are generally reserved for use by the system, such as Home, Back, Start Call, End Call, or Volume controls.) 调整设置系统按键事件 Home 、Back 、startCall 、 endCall 、 volumeControl)百分比 |
|
--pct-appswitch |
Adjust percentage of activity launches. At random intervals, the Monkey will issue a startActivity() call, as a way of maximizing coverage of all activities within your package. 调整设置（activity之间的切换）百分比 |
|
--pct-anyevent |
Adjust percentage of other types of events. This is a catch-all for all other types of events such as keypresses, other less-used buttons on the device, and so forth. 调整设置 ( 任意事件）百分比 |
|
| Constraints | -p |
If you specify one or more packages this way, the Monkey will only allow the system to visit activities within those packages. If your application requires access to activities in other packages (e.g. to select a contact) you'll need to specify those packages as well. If you don't specify any packages, the Monkey will allow the system to launch activities in all packages. To specify multiple packages, use the -p option multiple times — one -p option per package. 指定有效的package（如不指定，则对系统中所有package有效），一个-p 对应一个有效package， 如：-p com.ckt -p com.ckt.asura；可以指定多个 |
-c |
If you specify one or more categories this way, the Monkey will only allow the system to visit activities that are listed with one of the specified categories. If you don't specify any categories, the Monkey will select activities listed with the category Intent.CATEGORY_LAUNCHER or Intent.CATEGORY_MONKEY. To specify multiple categories, use the -c option multiple times — one -c option per category. activity必须至少包含一个指定的category，才能被启动，否则启动不了； |
|
| Debugging | --dbg-no-events |
When specified, the Monkey will perform the initial launch into a test activity, but will not generate any further events. For best results, combine with -v, one or more package constraints, and a non-zero throttle to keep the Monkey running for 30 seconds or more. This provides an environment in which you can monitor package transitions invoked by your application. 设置此选项，Monkey将执行初始启动，进入到一个测试Activity，然后不会再进一步生成事件。为了得到最佳结果，把它与-v、一个或几个包约 束、以及一个保持Monkey运行30秒或更长时间的非零值联合起来，从而提供一个环境，可以监视应用程序所调用的包之间的转换。
|
--hprof |
If set, this option will generate profiling reports immediately before and after the Monkey event sequence. This will generate large (~5Mb) files in data/misc, so use with care. See Traceview for more information on trace files. 设置此选项，将在Monkey事件序列之前和之后立即生成profiling报告。这将会在data/misc中生成大文件(~5Mb)，所以要小心使用它。 |
|
--ignore-crashes |
Normally, the Monkey will stop when the application crashes or experiences any type of unhandled exception. If you specify this option, the Monkey will continue to send events to the system, until the count is completed. 通常，当应用程序崩溃或发生任何失控异常时，Monkey将停止运行。如果设置此选项，Monkey将继续向系统发送事件，直到计数完成。 |
|
--ignore-timeouts |
Normally, the Monkey will stop when the application experiences any type of timeout error such as a "Application Not Responding" dialog. If you specify this option, the Monkey will continue to send events to the system, until the count is completed. 通常，当应用程序发生任何超时错误(如“Application Not Responding”对话框)时，Monkey将停止运行。如果设置此选项，Monkey将继续向系统发送事件，直到计数完成。 |
|
--ignore-security-exceptions |
Normally, the Monkey will stop when the application experiences any type of permissions error, for example if it attempts to launch an activity that requires certain permissions. If you specify this option, the Monkey will continue to send events to the system, until the count is completed. 通常，当应用程序发生许可错误(如启动一个需要某些许可的Activity)时，Monkey将停止运行。如果设置了此选项，Monkey将继续向系统发送事件，直到计数完成。 |
|
--kill-process-after-error |
Normally, when the Monkey stops due to an error, the application that failed will be left running. When this option is set, it will signal the system to stop the process in which the error occurred. Note, under a normal (successful) completion, the launched process(es) are not stopped, and the device is simply left in the last state after the final event. 通常，当Monkey由于一个错误而停止时，出错的应用程序将继续处于运行状态。当设置了此选项时，将会通知系统停止发生错误的进程。注意，正常的(成功的)结束，并没有停止启动的进程，设备只是在结束事件之后，简单地保持在最后的状态。 |
|
--monitor-native-crashes |
Watches for and reports crashes occurring in the Android system native code. If --kill-process-after-error is set, the system will stop. 监视并报告Android系统中本地代码的崩溃事件。如果设置了--kill-process-after-error，系统将停止运行。 |
|
--wait-dbg |
Stops the Monkey from executing until a debugger is attached to it. 停止执行中的Monkey，直到有调试器和它相连接 |