Uart-log-ALL
[156940] fastboot: download:009ead28
[158410] fastboot: flash:boot
[158410] boot is not yl image
[158610] fastboot: reboot
[158610] rebooting the device
[158610] SCM call: 0x2000110 failed with :ffffffff
[158620] SCM call: 0x82000901 failed with
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00095
S - IMAGE_VARIANT_STRING=EAASANAZA
S - OEM_IMAGE_VERSION_STRING=ubuntu
S - Boot Config, 0x000000e1
B - 4947 - PBL, Start
B - 8079 - bootable_media_detect_entry, Start
B - 154531 - bootable_media_detect_success, Start
B - 154537 - elf_loader_entry, Start
B - 156948 - auth_hash_seg_entry, Start
B - 157267 - auth_hash_seg_exit, Start
B - 189049 - elf_segs_hash_verify_entry, Start
B - 310156 - PBL, End
B - 317444 - SBL1, Start
B - 378688 - pm_device_init, Start
B - 382500 - PON REASON:PM0:0x200000021 PM1:0x200000021 PM2:0x200000020
D - 43981 - pm_device_init, Delta
B - 424377 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 426634 - boot_config_data_table_init, Start
D - 6039 - boot_config_data_table_init, Delta - (0 Bytes)
B - 437370 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B - 443592 - sbl1_ddr_set_params, Start
B - 448563 - cpr_init, Start
D - 3324 - cpr_init, Delta
B - 453413 - Pre_DDR_clock_init, Start
D - 305 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 469029 - do ddr sanity test, Start
D - 366 - do ddr sanity test, Delta
B - 471713 - pm_driver_init, Start
B - 479124 - raw vbat: 4251, gain: -20
B - 479155 - vbat: 4040
B - 481168 - Battery good, bootup
D - 9516 - pm_driver_init, Delta
B - 487939 - vsense_init, Start
D - 0 - vsense_init, Delta
B - 506513 - clock_init, Start
D - 640 - clock_init, Delta
B - 508679 - Image Load, Start
D - 72437 - QSEE Image Loaded, Delta - (1256232 Bytes)
B - 581147 - Image Load, Start
D - 732 - SEC Image Loaded, Delta - (2048 Bytes)
B - 588467 - sbl1_efs_handle_cookies, Start
D - 976 - sbl1_efs_handle_cookies, Delta
B - 596275 - VSENSE codes wrote into SMEM
B - 600270 - Image Load, Start
D - 11834 - DEVCFG Image Loaded, Delta - (27556 Bytes)
B - 612836 - Image Load, Start
D - 20100 - RPM Image Loaded, Delta - (161456 Bytes)
B - 632997 - Image Load, Start
D - 34800 - APPSBL Image Loaded, Delta - (518748 Bytes)
B - 667858 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 673562 - USB D+ check, Start
D - 0 - USB D+ check, Delta
B - 679936 - SBL1, End
D - 364871 - SBL1, Delta
S - Flash Throughput, 25000 KB/s (1969858 Bytes, 77889 us)
S - DDR Frequency, 931 MHz
S - Core 0 Frequency, 800 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk
[10] platform_init()
[10] target_init()
[70] SDHC Running in HS400 mode
[70] Done initialization of the card
[80] Waiting for the RPM to populate smd channel table
[80] zll gpio config.
[80] yl_hardware_version = 10, yl_product_name=A9S_9
[90] =================aboot_init_20150522_guojing=========================
[100] --mdss--Display Init: Start
[100] gcdb_display_init: [qcom,mdss_dsi_magna_samsung_amoled_fhd_550]
[110] init_panel_data: panel_id=0
[130] amoled avdd trim set [0x5]
[180] target_panel_reset rst_gpio= 25
[240] Config MIPI_CMD_PANEL.
[270] Panel CMD: command mode dma test failed
[270] mipi id read [0xdb] = 0x0[0x1]
[280] find panel changed
[280] Turn off MIPI_CMD_PANEL.
[310] Panel CMD: command mode dma test failed
[390] Panel CMD: command mode dma test failed
[520] target_panel_reset rst_gpio= 25
[530] gcdb_display_init: [qcom,mdss_dsi_sh1387_hehui_amoled_hd_500]
[530] init_panel_data: panel_id=1
[550] amoled avdd trim set [0xb]
[610] target_panel_reset rst_gpio= 25
[660] Config MIPI_VIDEO_PANEL.
[830] Turn on MIPI_VIDEO_PANEL.
[840] Video lane tested successfully
[850] logo.bin header flag is 6c796c79
[850] ~~size=[10101b4]
[850] actual size=[1010200]
[910] name[logo_coolpad_fhd]x[216]y[527]w[648]h[134]
[910] name[download_page2_hd]x[23]y[641]w[972]h[241]
[920] yl_add_image_res: Y is more than or equal to max height, y=1661, config->height=1280
[930] name[logo_coolpad_fhd]x[324]y[1279]w[432]h[107]
[930] name[batt_low_fhd]x[440]y[1000]w[200]h[50]
[940] name[logo_mobile_4g_hd]x[0]y[0]w[720]h[1280]
[940] name[download_page1_fhd]x[53]y[503]w[974]h[782]
[940] name[batt_empty_fhd]x[280]y[750]w[520]h[220]
[950] name[logo_mobile_4g_fhd]x[0]y[0]w[1080]h[1920]
[950] name[charge_err_fhd]x[440]y[1000]w[200]h[50]
[960] name[charge_err_fhd]x[290]y[750]w[510]h[210]
[960] name[download_page1_hd]x[23]y[503]w[974]h[782]
[970] yl_add_image_res: Y is more than or equal to max height, y=1580, config->height=1280
[980] name[batt_low_fhd]x[500]y[1279]w[80]h[339]
[980] name[logo_coolpad_hd]x[210]y[1100]w[300]h[80]
[980] name[logo_coolpad_hd]x[140]y[350]w[440]h[90]
[990] name[batt_low_fhd]x[280]y[750]w[520]h[220]
[990] yl_add_image_res: Y is more than or equal to max height, y=1680, config->height=1280
[1000] name[charge_err_fhd]x[210]y[1279]w[660]h[70]
[1010] name[download_page2_fhd]x[53]y[641]w[972]h[241]
[1010] --mdss--Display Init: Done
[1010] PMIC[0x88F]=0x00
[1020] aboot_init: hard_reboot_mode = 0
[1020] yl_reboot_reason is 0xd6c630e3
[1020] qualcomm_boot_event is 0x21
[1030] pm8x41_get_is_cold_boot: cold boot
[1030] qpnp_charger_init:not use lk trickle charging and return
[1040] yl_check_hard_reset
[1040] poff_reason=0x2
[1040] hard reset reboot: company.boot_event=hard_reset, company.reboot_event=ps_hold_reset, boot_reason=6
[1050] yl_boot_event_check:
[1050] poweron_reason=0x21
[1050] company.boot_reason=6
[1060] company.boot_event=hard_reset
[1060] company.reboot_event=ps_hold_reset
[1060] ---------gr--------yl_boot_process_check start
[1070] ===usb_st = 4====
[1070] yl_pm8x41_batt_voltage_read..., Vbatt=0x109b
[1080] yl_pm8x41_batt_voltage_read..., Vbatt=0x109b
[1080] yl_pm8x41_batt_voltage_read..., Vbatt=0x109b
[1090] yl_pm8x41_batt_voltage_read..., Vbatt=0x109b
[1090] yl_pm8x41_batt_voltage_read..., Vbatt=0x104d
[1090] yl_pm8x41_batt_voltage_read..., Vbatt=0x109b
[1100] bat_vbat:4251
[1100] resulotion is [1]
[1100] find resource logo_coolpad_hd successfully
[1110] x=140 ~! y=350
[1110] find resource logo_coolpad_hd successfully
[1110] x=210 ~! y=1100
[1140] --set backlight level is 60--
[1140] ---------gr--------yl_set_lcd_backlight end
[1140] ---------gr--------yl_turn_on_vib end
[1150] ---------gr--------yl_boot_process_check end
[1150] Recovery command: 32 normal2
[1160] ---------gr--------boot_linux_from_mmc start
[1160] Unable to locate /bootselect partition
[1170] Loading boot image (10397696): start
[1200] Loading boot image (10397696): done
[1210] use_signed_kernel=0, is_unlocked=1, is_tampered=0.
[1210] decompressing kernel image: start
[1700] decompressing kernel image: done
[1720] yl_pcb_id(10) yl_project_id(A9S_9)
[1720] Best match DTB tags 278/00000008/0x00000000/0/20010/20011/1000c/0/93e13808/35acd
[1730] Using pmic info 0x20010/0x20011/0x1000c/0x0 for device 0x20010/0x20011/0x1000c/0x0
[1740] Panel_name: not found in lookup table
[1740] Sec. panel not found. Continue with primary panel
[1750] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 loglevel=8 earlyprintk=msm_hsl_uart,0x78b0000 androidboot.emmc=true androidboot.serialno=36a72c45 androidboot.baseband=msm poweron_reason=0x21 company.boot_reason=6 company.boot_event=hard_reset company.reboot_event=ps_hold_reset androidboot.sbc_flag=0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sh1387_hehui_amoled_hd_500:1:none:cfg:single_dsi
[1800] Updating device tree: start
[1950] platform_read_pte_reg 0
[1950] Updating device tree: done
[1950] Channel alloc freed
[1960] Turn off MIPI_VIDEO_PANEL.
[1960] Continuous splash enabled, keeping panel alive.
[1960] booting linux @ 0x10080000, ramdisk @ 0x12000000 (1706831), tags/device tree @ 0x11e00000
[1970] SCM call: 0x2000110 failed with :ffffffff
[1970] Jumping to kernel via monitor
[ 0.000000]@0 Initializing cgroup subsys cpu
[ 0.000000]@0 Initializing cgroup subsys cpuacct
[ 0.000000]@0 Linux version 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty ([email protected]) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #50 SMP PREEMPT Sat Mar 19 11:40:43 CST 2016
[ 0.000000]@0 CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM8976 MTP
[ 0.000000]@0 zll----param=boot_cpus
[ 0.000000]@0 zll----early=1,str=boot_cpus
[ 0.000000]@0 zll----param=sched_enable_hmp
[ 0.000000]@0 zll----early=1,str=sched_enable_hmp
[ 0.000000]@0 zll----param=console
[ 0.000000]@0 zll----param=androidboot.console
[ 0.000000]@0 zll----param=androidboot.hardware
[ 0.000000]@0 zll----param=msm_rtb.filter
[ 0.000000]@0 zll----param=ehci-hcd.park
[ 0.000000]@0 zll----param=androidboot.bootdevice
[ 0.000000]@0 zll----param=lpm_levels.sleep_disabled
[ 0.000000]@0 zll----param=loglevel
[ 0.000000]@0 zll----early=1,str=loglevel
[ 0.000000]@0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 0.000000]@0 Call trace:
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 zll----param=earlyprintk
[ 0.000000]@0 zll----early=1,str=earlyprintk
[ 0.000000]@0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 0.000000]@0 Call trace:
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 bootconsole [earlycon0] enabled
[ 0.000000]@0 zll----param=androidboot.emmc
[ 0.000000]@0 zll----param=androidboot.serialno
[ 0.000000]@0 zll----param=androidboot.baseband
[ 0.000000]@0 zll----param=poweron_reason
[ 0.000000]@0 zll----param=company.boot_reason
[ 0.000000]@0 zll----param=company.boot_event
[ 0.000000]@0 zll----param=company.reboot_event
[ 0.000000]@0 zll----param=androidboot.sbc_flag
[ 0.000000]@0 zll----param=mdss_mdp.panel
[ 0.000000]@0 cma: Found other_ext_region@0, memory base 0x0000000085b00000, size 13 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found modem_region@0, memory base 0x0000000086c00000, size 86 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found reloc_region@0, memory base 0x000000008c200000, size 23 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found venus_region@0, memory base 0x0000000000000000, size 5 MiB, limit 0x0000000090000000
[ 0.000000]@0 cma: Found secure_region@0, memory base 0x0000000000000000, size 129 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found qseecom_region@0, memory base 0x0000000000000000, size 16 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found audio_region@0, memory base 0x0000000000000000, size 3 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found splash_region@83000000, memory base 0x0000000083000000, size 40 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: Found adsp_region@0, memory base 0x0000000000000000, size 4 MiB, limit 0xffffffffffffffff
[ 0.000000]@0 cma: CMA: reserved 13 MiB at 0x0000000085b00000 for other_ext_mem
[ 0.000000]@0 cma: CMA: reserved 86 MiB at 0x0000000086c00000 for modem_mem
[ 0.000000]@0 cma: CMA: reserved 23 MiB at 0x000000008c200000 for reloc_mem
[ 0.000000]@0 cma: CMA: reserved 8 MiB at 0x000000008f800000 for venus_mem
[ 0.000000]@0 cma: CMA: reserved 132 MiB at 0x00000000f7c00000 for secure_mem
[ 0.000000]@0 cma: CMA: reserved 16 MiB at 0x00000000f6c00000 for qseecom_mem
[ 0.000000]@0 cma: CMA: reserved 4 MiB at 0x00000000f6800000 for (null)
[ 0.000000]@0 cma: CMA: reserved 40 MiB at 0x0000000083000000 for cont_splash_mem
[ 0.000000]@0 cma: CMA: reserved 4 MiB at 0x00000000f6400000 for adsp_mem
[ 0.000000]@0 cma: CMA: reserved 16 MiB at 0x00000000f5400000 for default region
[ 0.000000]@0 On node 0 totalpages: 951808
[ 0.000000]@0 DMA zone: 17280 pages used for memmap
[ 0.000000]@0 DMA zone: 0 pages reserved
[ 0.000000]@0 DMA zone: 951808 pages, LIFO batch:31
[ 0.000000]@0 psci: probing for conduit method from DT.
[ 0.000000]@0 psci: PSCIv1.0 detected in firmware.
[ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 psci: Initializing psco_cpu_init
[ 0.000000]@0 PERCPU: Embedded 17 pages/cpu @ffffffc0e4c07000 s39232 r8192 d22208 u69632
[ 0.000000]@0 pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
[ 0.000000]@0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 934528
[ 0.000000]@0 Kernel command line: boot_cpus=0,1,2,3,4,5 sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 loglevel=8 earlyprintk=msm_hsl_uart,0x78b0000 androidboot.emmc=true androidboot.serialno=36a72c45 androidboot.baseband=msm poweron_reason=0x21 company.boot_reason=6 company.boot_event=hard_reset company.reboot_event=ps_hold_reset androidboot.sbc_flag=0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sh1387_hehui_amoled_hd_500:1:none:cfg:single_dsi
[ 0.000000]@0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 0.000000]@0 Call trace:
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 [
[ 0.000000]@0 SMBCHG: PoweroffCharge_info: poweroff_charge=0 ,type=6
[ 0.000000]@0 PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000]@0 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000]@0 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000]@0 software IO TLB [mem 0xefc62000-0xefd62000] (1MB) mapped at [ffffffc0dfc62000-ffffffc0dfd61fff]
[ 0.000000]@0 Memory: 3460600K/3807232K available (12319K kernel code, 2523K rwdata, 6380K rodata, 2810K init, 2346K bss, 346632K reserved)
[ 0.000000]@0 Virtual kernel memory layout:
[ 0.000000]@0 vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
[ 0.000000]@0 vmemmap : 0xffffffbc00480000 - 0xffffffbc04800000 ( 67 MB)
[ 0.000000]@0 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000]@0 memory : 0xffffffc000000000 - 0xffffffc0f0000000 ( 3840 MB)
[ 0.000000]@0 .init : 0xffffffc001600000 - 0xffffffc0018be940 ( 2811 kB)
[ 0.000000]@0 .text : 0xffffffc000080000 - 0xffffffc001442f64 ( 20236 kB)
[ 0.000000]@0 .data : 0xffffffc0018bf000 - 0xffffffc001b35f10 ( 2524 kB)
[ 0.000000]@0 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000]@0 HMP scheduling enabled.
[ 0.000000]@0 Preemptible hierarchical RCU implementation.
[ 0.000000]@0 RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0
[ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000000]@0 ODEBUG: 370 of 370 active objects replaced
[ 0.000000]@0 kmemleak: Kernel memory leak detector disabled
[ 0.014294]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.024742]@0 pid_max: default: 32768 minimum: 301
[ 0.030814]@0 Security Framework initialized
[ 0.034070]@0 SELinux: Initializing.
[ 0.037932]@0 SELinux: Starting in permissive mode
[ 0.042842]@0 Mount-cache hash table entries: 256
[ 0.050403]@0 Initializing cgroup subsys debug
[ 0.053827]@0 Initializing cgroup subsys freezer
[ 0.060013]@0 /cpus/cpu@0: Missing clock-frequency property
[ 0.064551]@0 /cpus/cpu@1: Missing clock-frequency property
[ 0.070146]@0 /cpus/cpu@2: Missing clock-frequency property
[ 0.075665]@0 /cpus/cpu@3: Missing clock-frequency property
[ 0.081241]@0 /cpus/cpu@100: Missing clock-frequency property
[ 0.086952]@0 /cpus/cpu@101: Missing clock-frequency property
[ 0.092700]@0 /cpus/cpu@102: Missing clock-frequency property
[ 0.098414]@0 /cpus/cpu@103: Missing clock-frequency property
[ 0.104154]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 6 counters available
[ 0.115861]@0 ftrace: Allocated trace_printk buffers
[ 0.140413]@0 Core Debug Lock unlocked
[ 0.143727]@0 MSM Memory Dump base table set up
[ 0.147772]@0 MSM Memory Dump apps data table set up
[ 0.152612]@0 Configuring XPU violations to be fatal errors
[ 0.159432]@0 cpu_clock_a72_init: A72 Power clocks configured
[ 0.207230]@0 Brought up 6 CPUs
[ 0.209340]@0 SMP: Total of 6 processors activated.
[ 0.295944]@0 zll----calling---level=0 __initcall_ipc_ns_init0+0x0/0x8 @
[ 0.301790]@0 zll----calling---level=0 __initcall_init_mmap_min_addr0+0x0/0x8 @
[ 0.309466]@0 zll----calling---level=0 __initcall_init_watchdog0+0x0/0x8 @
[ 0.316286]@0 zll----calling---level=0 __initcall_init_cpufreq_govinfo_notifier_list0+0x0/0x8 @
[ 0.325222]@0 zll----calling---level=0 __initcall_init_cpufreq_transition_notifier_list0+0x0/0x8 @
[ 0.334787]@0 zll----calling---level=0 __initcall_net_ns_init0+0x0/0x8 @
[ 0.341969]@0 zll----calling---level=1 __initcall_cpu_hotplug_pm_sync_init1+0x0/0x8 @
[ 0.349096]@0 zll----calling---level=1 __initcall_alloc_frozen_cpus1+0x0/0x8 @
[ 0.356871]@0 zll----calling---level=1 __initcall_wq_sysfs_init1+0x0/0x8 @
[ 0.363586]@0 zll----calling---level=1 __initcall_ksysfs_init1+0x0/0x8 @
[ 0.370396]@0 zll----calling---level=1 __initcall_register_sched_callback1+0x0/0x8 @
[ 0.378781]@2 zll----calling---level=1 __initcall_pm_init1+0x0/0x8 @
[ 0.384804]@2 zll----calling---level=1 __initcall_init_jiffies_clocksource1+0x0/0x8 @
[ 0.392948]@2 zll----calling---level=1 __initcall_cgroup_wq_init1+0x0/0x8 @
[ 0.406015]@2 zll----calling---level=1 __initcall_event_trace_enable1+0x0/0x8 @
[ 0.412505]@2 zll----calling---level=1 __initcall_cpu_pm_init1+0x0/0x8 @
[ 0.419740]@2 zll----calling---level=1 __initcall_perf_workqueue_init1+0x0/0x8 @
[ 0.426900]@2 zll----calling---level=1 __initcall_init_zero_pfn1+0x0/0x8 @
[ 0.433943]@2 zll----calling---level=1 __initcall_fsnotify_init1+0x0/0x8 @
[ 0.441069]@2 zll----calling---level=1 __initcall_filelock_init1+0x0/0x8 @
[ 0.447969]@2 zll----calling---level=1 __initcall_init_script_binfmt1+0x0/0x8 @
[ 0.455453]@2 zll----calling---level=1 __initcall_init_elf_binfmt1+0x0/0x8 @
[ 0.462637]@2 zll----calling---level=1 __initcall_init_compat_elf_binfmt1+0x0/0x8 @
[ 0.470543]@2 zll----calling---level=1 __initcall_debugfs_init1+0x0/0x8 @
[ 0.477397]@2 zll----calling---level=1 __initcall_prandom_init1+0x0/0x8 @
[ 0.484355]@2 pinctrl core: initialized pinctrl subsystem
[ 0.490166]@2 zll----calling---level=1 __initcall_pinctrl_init1+0x0/0x8 @
[ 0.496691]@2 zll----calling---level=1 __initcall_msm_rq_stats_early_init1+0x0/0x8 @
[ 0.505401]@2 regulator-dummy: no parameters
[ 0.509323]@2 zll----calling---level=1 __initcall_regulator_init1+0x0/0x8 @
[ 0.628375]@2 zll----calling---level=1 __initcall_cma_init_reserved_areas1+0x0/0x8 @
[ 0.635638]@2 zll----calling---level=1 __initcall_soc_bus_register1+0x0/0x8 @
[ 0.642562]@2 zll----calling---level=1 __initcall_cpufreq_core_init1+0x0/0x8 @
[ 0.649969]@2 zll----calling---level=1 __initcall_msm_cpufreq_early_register1+0x0/0x8 @
[ 0.658185]@2 zll----calling---level=1 __initcall_cpuidle_init1+0x0/0x8 @
[ 0.665773]@2 zll----calling---level=1 __initcall_sock_init1+0x0/0x8 @
[ 0.671736]@2 zll----calling---level=1 __initcall_net_inuse_init1+0x0/0x8 @
[ 0.679121]@2 NET: Registered protocol family 16
[ 0.683579]@2 zll----calling---level=1 __initcall_netlink_proto_init1+0x0/0x8 @
[ 0.691867]@2 zll----calling---level=2 __initcall_debug_monitors_init2+0x0/0x8 @
[ 0.700905]@2 zll----calling---level=2 __initcall_topology_init2+0x0/0x8 @
[ 0.718762]@0 DMA: preallocated 256 KiB pool for atomic allocations
[ 0.724067]@0 zll----calling---level=2 __initcall_atomic_pool_init2+0x0/0x8 @
[ 0.731499]@0 zll----calling---level=2 __initcall_bdi_class_init2+0x0/0x8 @
[ 0.738535]@0 zll----calling---level=2 __initcall_kobject_uevent_init2+0x0/0x8 @
[ 0.746126]@0 zll----calling---level=2 __initcall_msm_tlmm_drv_register2+0x0/0x8 @
[ 0.753805]@0 zll----calling---level=2 __initcall_gpiolib_sysfs_init2+0x0/0x8 @
[ 0.761218]@0 zll----calling---level=2 __initcall_pcibus_class_init2+0x0/0x8 @
[ 0.768764]@0 zll----calling---level=2 __initcall_pci_driver_init2+0x0/0x8 @
[ 0.775963]@0 zll----calling---level=2 __initcall_amba_init2+0x0/0x8 @
[ 0.782563]@0 zll----calling---level=2 __initcall_mem_acc_regulator_init2+0x0/0x8 @
[ 0.790337]@0 zll----calling---level=2 __initcall_regulator_stub_init2+0x0/0x8 @
[ 0.797892]@0 zll----calling---level=2 __initcall_tty_class_init2+0x0/0x8 @
[ 0.804939]@0 zll----calling---level=2 __initcall_wakeup_sources_debugfs_init2+0x0/0x8 @
[ 0.813207]@0 zll----calling---level=2 __initcall_regmap_initcall2+0x0/0x8 @
[ 0.820586]@0 zll----calling---level=2 __initcall_spi_init2+0x0/0x8 @
[ 0.827251]@0 zll----calling---level=2 __initcall_spmi_init2+0x0/0x8 @
[ 0.833784]@0 zll----calling---level=2 __initcall_spmi_pmic_arb_init2+0x0/0x8 @
[ 0.841463]@0 zll----calling---level=2 __initcall_slimbus_init2+0x0/0x8 @
[ 0.848315]@0 zll----calling---level=2 __initcall_soundwire_init2+0x0/0x8 @
[ 0.855526]@0 zll----calling---level=2 __initcall_i2c_init2+0x0/0x8 @
[ 0.876992]@0 zll----calling---level=2 __initcall_msm_pm_boot_init2+0x0/0x8 @
[ 0.883420]@0 zll----calling---level=2 __initcall_msm_bus_init2+0x0/0x8 @
[ 0.891156]@0 zll----calling---level=3 __initcall_debug_traps_init3+0x0/0x8 @
[ 0.967401]@0 msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[ 0.974102]@0 msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[ 0.979373]@0 cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
[ 0.979895]@0 cma: Assigned CMA region at 0 to c200000.qcom,lpass device
[ 0.980542]@0 spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[ 1.001131]@1 cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
[ 1.014564]@1 cma: Assigned CMA region at 0 to qcom,adsprpc-mem.95 device
[ 1.021804]@1 cma: Assigned CMA region at 0 to 4080000.qcom,mss device
[ 1.029886]@1 mem_acc_gfx_corner: 0 <--> 0 mV
[ 1.044794]@1 zll----calling---level=3 __initcall_arm64_device_init3+0x0/0x8 @
[ 1.051204]@1 vdso: 2 pages (1 code, 1 data) at base ffffffc0018c5000
[ 1.057594]@1 zll----calling---level=3 __initcall_vdso_init3+0x0/0x8 @
[ 1.064304]@1 zll----calling---level=3 __initcall_alloc_vectors_page3+0x0/0x8 @
[ 1.071754]@1 zll----calling---level=3 __initcall_cpu_pmu_reset3+0x0/0x8 @
[ 1.078786]@1 zll----calling---level=3 __initcall_gic_init_sys3+0x0/0x8 @
[ 1.086255]@1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 1.092364]@1 platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
[ 1.099938]@1 zll----calling---level=3 __initcall_msm_mpm_device_init3+0x0/0x8 @
[ 1.107592]@1 smd_open() before smd_init()
[ 1.110992]@1 platform qcom,rpm-smd.58: Driver rpm-smd requests probe deferral
[ 1.118543]@1 zll----calling---level=3 __initcall_msm_rpm_driver_init3+0x0/0x8 @
[ 1.128255]@2 zll----calling---level=3 __initcall_msm_smd_init3+0x0/0x8 @
[ 1.137009]@2 smd_channel_probe_now: allocation table not initialized
[ 1.144357]@2 smd_channel_probe_now: allocation table not initialized
[ 1.150997]@2 smd_channel_probe_now: allocation table not initialized
[ 1.158346]@2 zll----calling---level=3 __initcall_msm_smem_init3+0x0/0x8 @
[ 1.166398]@2 zll----calling---level=3 __initcall_msm_spm_device_init3+0x0/0x8 @
[ 1.173597]@2 zll----calling---level=3 __initcall_subsys_restart_init3+0x0/0x8 @
[ 1.181348]@2 zll----calling---level=3 __initcall_msm_vsens_init3+0x0/0x8 @
[ 1.187712]@2 zll----calling---level=3 __initcall_dma_bus_init3+0x0/0x8 @
[ 1.194703]@2 zll----calling---level=3 __initcall_dma_channel_table_init3+0x0/0x8 @
[ 1.202494]@2 zll----calling---level=3 __initcall_fan53555_regulator_init3+0x0/0x8 @
[ 1.210355]@2 zll----calling---level=3 __initcall_ncp6335d_regulator_init3+0x0/0x8 @
[ 1.219490]@2 zll----calling---level=3 __initcall_rpm_smd_regulator_driver_init3+0x0/0x8 @
[ 1.227737]@2 pm8004_s5: 500 <--> 1165 mV at 1180 mV normal idle
[ 1.233784]@2 zll----calling---level=3 __initcall_qpnp_regulator_init3+0x0/0x8 @
[ 1.241192]@2 pm8950_s5: 500 <--> 1165 mV at 1050 mV normal idle
[ 1.247176]@2 spm_regulator_probe: name=pm8950_s5, range=LV, voltage=1050000 uV, mode=AUTO, step rate=1200 uV/us
[ 1.257376]@2 pm8004_s2: 500 <--> 1165 mV at 1000 mV normal idle
[ 1.263424]@2 spm_regulator_probe: name=pm8004_s2, range=LV, voltage=1000000 uV, mode=AUTO, step rate=1200 uV/us
[ 1.273097]@2 zll----calling---level=3 __initcall_spm_regulator_init3+0x0/0x8 @
[ 1.281538]@2 cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 1.288582]@2 cpr_read_fuse_revision: apc0_corner: fuse revision = 1
[ 1.294846]@2 cpr_parse_speed_bin_fuse: apc0_corner: [row: 37]: 0x2050cc21001de9e6, speed_bits = 0
[ 1.303965]@2 cpr_pvs_init: apc0_corner: pvs voltage: [830000 980000 1095000] uV
[ 1.311159]@2 cpr_pvs_init: apc0_corner: ceiling voltage: [950000 1050000 1165000] uV
[ 1.318995]@2 cpr_pvs_init: apc0_corner: floor voltage: [795000 835000 930000] uV
[ 1.327279]@2 platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
[ 1.335074]@2 cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000000a0000 (len=0x1000)
[ 1.342799]@2 cpr_read_fuse_revision: apc1_corner: fuse revision = 1
[ 1.349127]@2 cpr_parse_speed_bin_fuse: apc1_corner: [row: 37]: 0x2050cc21001de9e6, speed_bits = 0
[ 1.358183]@2 cpr_pvs_init: apc1_corner: pvs voltage: [860000 980000 1085000] uV
[ 1.365439]@2 cpr_pvs_init: apc1_corner: ceiling voltage: [950000 1050000 1165000] uV
[ 1.373224]@2 cpr_pvs_init: apc1_corner: floor voltage: [790000 820000 915000] uV
[ 1.381323]@2 platform b118000.regulator: Driver qcom,cpr-regulator requests probe deferral
[ 1.389257]@2 zll----calling---level=3 __initcall_cpr_regulator_init3+0x0/0x8 @
[ 1.397350]@2 ibb_reg: 4600 <--> 6000 mV
[ 1.401461]@2 lab_reg: 4600 <--> 6000 mV
[ 1.405005]@2 zll----calling---level=3 __initcall_qpnp_labibb_regulator_init3+0x0/0x8 @
[ 1.413761]@2 cpr2_gfx_allocate_memory: gfx_corner: ro_count = 8
[ 1.419131]@2 cpr_efuse_init: gfx_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 1.426780]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[1]: 815000 -> 760000 uV
[ 1.435749]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[3]: 900000 -> 840000 uV
[ 1.444890]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[5]: 900000 -> 960000 uV
[ 1.453978]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[7]: 1015000 -> 1075000 uV
[ 1.463392]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[9]: 1115000 -> 1165000 uV
[ 1.472611]@2 cpr_pvs_init: gfx_corner: pvs voltage: [760000 815000 840000 900000 960000 1015000 1075000 1115000 1165000] uV
[ 1.483780]@2 cpr_pvs_init: gfx_corner: ceiling voltage: [810000 865000 900000 950000 1010000 1050000 1110000 1165000 1165000] uV
[ 1.495406]@2 cpr_pvs_init: gfx_corner: floor voltage: [755000 755000 755000 795000 835000 855000 920000 945000 945000] uV
[ 1.507165]@2 platform 98000.regulator: Driver qcom,cpr2-gfx-regulator requests probe deferral
[ 1.515213]@2 zll----calling---level=3 __initcall_cpr2_gfx_regulator_init3+0x0/0x8 @
[ 1.523485]@2 zll----calling---level=3 __initcall_touchscreen_sysfs_init3+0x0/0x8 @
[ 1.531775]@2 i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 1.536898]@2 i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[ 1.543091]@2 i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[ 1.549855]@2 platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 1.557327]@2 i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[ 1.563131]@2 i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[ 1.569217]@2 i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[ 1.575974]@2 platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 1.583451]@2 i2c-msm-v2 7af6000.i2c: probing driver i2c-msm-v2
[ 1.589076]@2 i2c-msm-v2 7af6000.i2c: error on clk_get(core_clk):-517
[ 1.595345]@2 i2c-msm-v2 7af6000.i2c: error probe() failed with err:-517
[ 1.602099]@2 platform 7af6000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 1.609582]@2 i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
[ 1.615201]@2 i2c-msm-v2 7af8000.i2c: error on clk_get(core_clk):-517
[ 1.621473]@2 i2c-msm-v2 7af8000.i2c: error probe() failed with err:-517
[ 1.628226]@2 platform 7af8000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 1.635689]@2 zll----calling---level=3 __initcall_i2c_msm_init3+0x0/0x8 @
[ 1.643796]@2 zll----calling---level=3 __initcall_msm_pm_sleep_status_init3+0x0/0x8 @
[ 1.652156]@2 msm-tsens 4a8000.tsens: tsens_calib_mask_info not set
[ 1.658658]@2 zll----calling---level=3 __initcall_tsens_tm_init_driver3+0x0/0x8 @
[ 1.666474]@2 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[ 1.677194]@2 platform qcom,msm-thermal.55: Driver msm-thermal requests probe deferral
[ 1.685388]@2 zll----calling---level=3 __initcall_msm_thermal_device_init3+0x0/0x8 @
[ 1.696523]@2 sps:sps is ready.
[ 1.699154]@2 zll----calling---level=3 __initcall_sps_init3+0x0/0x8 @
[ 1.706075]@2 zll----calling---level=3 __initcall_msm_dummy_clk_init3+0x0/0x8 @
[ 1.713376]@2 zll----calling---level=3 __initcall_msm_rpmcc_8916_init3+0x0/0x8 @
[ 1.720873]@2 zll----calling---level=3 __initcall_msm_gcc_init3+0x0/0x8 @
[ 1.727825]@2 zll----calling---level=3 __initcall_msm_rpmcc_8936_init3+0x0/0x8 @
[ 1.735485]@2 zll----calling---level=3 __initcall_msm_gcc_init3+0x0/0x8 @
[ 1.742849]@2 zll----calling---level=3 __initcall_msm_gcc_init3+0x0/0x8 @
[ 1.749285]@2 platform 1800000.qcom,gcc: Driver qcom,gcc-8976 requests probe deferral
[ 1.756949]@2 zll----calling---level=3 __initcall_msm_gcc_init3+0x0/0x8 @
[ 1.764002]@2 cpu-clock-8976 b114000.qcom,cpu-clock-8976: Speed bin: 0 PVS Version: 0
[ 1.771614]@2 platform b114000.qcom,cpu-clock-8976: Driver cpu-clock-8976 requests probe deferral
[ 1.781170]@2 zll----calling---level=3 __initcall_clock_cpu_init3+0x0/0x8 @
[ 1.788297]@2 zll----calling---level=3 __initcall_clock_a7_init3+0x0/0x8 @
[ 1.794952]@2 zll----calling---level=3 __initcall_clock_a53_init3+0x0/0x8 @
[ 1.802117]@2 zll----calling---level=3 __initcall_clock_a53_init3+0x0/0x8 @
[ 1.808657]@2 zll----calling---level=3 __initcall_iommu_init3+0x0/0x8 @
[ 1.816150]@2 zll----calling---level=3 __initcall_msm8994_check_tlbi_workaround3s+0x0/0x8 @
[ 1.824610]@0 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 1.830494]@0 platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
[ 1.839899]@2 pm8950_s1: 1000 <--> 1162 mV at 1000 mV normal idle
[ 1.847044]@2 pm8950_s2_level: 0 <--> 0 mV at 0 mV normal idle
[ 1.853341]@2 pm8950_s2_floor_level: 0 <--> 0 mV normal idle
[ 1.859409]@2 pm8950_s2_level_ao: 0 <--> 0 mV normal idle
[ 1.865723]@2 pm8950_s3: 1325 mV normal idle
[ 1.870982]@2 pm8950_s4: 2050 mV normal idle
[ 1.876214]@2 pm8950_s6_level: 0 <--> 0 mV at 0 mV normal idle
[ 1.882444]@2 pm8950_s6_level_ao: 0 <--> 0 mV normal idle
[ 1.888360]@2 pm8950_s6_level_so: 0 <--> 0 mV at 0 mV normal idle
[ 1.894826]@2 pm8950_s6_floor_level: 0 <--> 0 mV normal idle
[ 1.901301]@2 pm8950_l1: 1200 mV normal idle
[ 1.906587]@2 pm8950_l2: 1200 mV normal idle
[ 1.911788]@2 pm8950_l3: 1000 <--> 1100 mV at 1000 mV normal idle
[ 1.918925]@2 pm8950_l5: 1800 mV normal idle
[ 1.923959]@2 pm8950_l6: 1800 mV normal idle
[ 1.929351]@2 pm8950_l7: 1800 mV normal idle
[ 1.934024]@2 pm8950_l7_ao: 1800 mV normal idle
[ 1.939334]@2 pm8950_l8: 2900 mV normal idle
[ 1.944542]@2 pm8950_l9: 3000 <--> 3300 mV at 3000 mV normal idle
[ 1.951552]@2 pm8950_l10: 2800 mV normal idle
[ 1.956754]@2 pm8950_l11: 2950 mV normal idle
[ 1.962064]@2 pm8950_l12: 1800 <--> 2950 mV at 1800 mV normal idle
[ 1.969128]@2 pm8950_l13: 3075 mV normal idle
[ 1.974532]@2 pm8950_l14: 1800 <--> 3300 mV at 1800 mV normal idle
[ 1.981482]@2 pm8950_l15: 1800 <--> 3300 mV at 1800 mV normal idle
[ 1.988604]@2 pm8950_l16: 1800 mV normal idle
[ 1.993886]@2 pm8950_l17: 2850 mV normal idle
[ 1.999169]@2 pm8950_l19: 1200 <--> 1350 mV at 1200 mV normal idle
[ 2.006227]@2 pm8950_l22: 2800 mV normal idle
[ 2.011505]@2 pm8950_l23: 1200 mV normal idle
[ 2.015815]@2 cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 2.022983]@2 cpr_read_fuse_revision: apc0_corner: fuse revision = 1
[ 2.029240]@2 cpr_parse_speed_bin_fuse: apc0_corner: [row: 37]: 0x2050cc21001de9e6, speed_bits = 0
[ 2.038347]@2 cpr_pvs_init: apc0_corner: pvs voltage: [830000 980000 1095000] uV
[ 2.045553]@2 cpr_pvs_init: apc0_corner: ceiling voltage: [950000 1050000 1165000] uV
[ 2.053390]@2 cpr_pvs_init: apc0_corner: floor voltage: [795000 835000 930000] uV
[ 2.061500]@2 cpr_init_cpr_parameters: apc0_corner: up threshold = 2, down threshold = 4
[ 2.068951]@2 cpr_init_cpr_parameters: apc0_corner: CPR is enabled by default.
[ 2.076167]@2 cpr_init_cpr_efuse: apc0_corner: [row:73] = 0x5f829ab279d255
[ 2.083005]@2 cpr_init_cpr_efuse: apc0_corner: Corner[1]: ro_sel = 2, target quot = 950
[ 2.090954]@2 cpr_init_cpr_efuse: apc0_corner: Corner[2]: ro_sel = 2, target quot = 1300
[ 2.099050]@2 cpr_init_cpr_efuse: apc0_corner: Corner[3]: ro_sel = 2, target quot = 1540
[ 2.107122]@2 cpr_adjust_target_quots: apc0_corner: Corner[2]: adjusted target quot = 1337
[ 2.115370]@2 cpr_adjust_target_quots: apc0_corner: Corner[3]: adjusted target quot = 1690
[ 2.123815]@2 cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 2 quotient adjustment scaling factor: 1.187
[ 2.133946]@2 cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 3 quotient adjustment scaling factor: 0.919
[ 2.144290]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[1] = 950
[ 2.152061]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[2] = 950
[ 2.159895]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[3] = 1087
[ 2.167772]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[4] = 1337
[ 2.175694]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[5] = 1497
[ 2.183571]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[6] = 1602
[ 2.191493]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[7] = 1673
[ 2.199369]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[8] = 1690
[ 2.207290]@2 cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[9] = 1690
[ 2.215325]@2 cpr_fill_override_voltage: apc0_corner: floor override voltage: [795000 795000 835000 855000 945000 945000 990000 990000 990000] uV
[ 2.228391]@2 cpr_config: apc0_corner: Timer count: 0x17700 (for 5000 us)
[ 2.235809]@2 apc0_corner: 0 <--> 0 mV
[ 2.239900]@2 cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000000a0000 (len=0x1000)
[ 2.246904]@2 cpr_read_fuse_revision: apc1_corner: fuse revision = 1
[ 2.253238]@2 cpr_parse_speed_bin_fuse: apc1_corner: [row: 37]: 0x2050cc21001de9e6, speed_bits = 0
[ 2.262282]@2 cpr_pvs_init: apc1_corner: pvs voltage: [860000 980000 1085000] uV
[ 2.269546]@2 cpr_pvs_init: apc1_corner: ceiling voltage: [950000 1050000 1165000] uV
[ 2.277333]@2 cpr_pvs_init: apc1_corner: floor voltage: [790000 820000 915000] uV
[ 2.285530]@2 cpr_init_cpr_parameters: apc1_corner: up threshold = 2, down threshold = 4
[ 2.292889]@2 cpr_init_cpr_parameters: apc1_corner: CPR is enabled by default.
[ 2.300170]@2 cpr_init_cpr_efuse: apc1_corner: [row:74] = 0x299e8490111712
[ 2.306950]@2 cpr_init_cpr_efuse: apc1_corner: Corner[1]: ro_sel = 2, target quot = 990
[ 2.314947]@2 cpr_init_cpr_efuse: apc1_corner: Corner[2]: ro_sel = 2, target quot = 1260
[ 2.322996]@2 cpr_init_cpr_efuse: apc1_corner: Corner[3]: ro_sel = 2, target quot = 1480
[ 2.331114]@2 cpr_adjust_target_quots: apc1_corner: Corner[2]: adjusted target quot = 1223
[ 2.339511]@2 cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 2 quotient adjustment scaling factor: 0.466
[ 2.349665]@2 cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 3 quotient adjustment scaling factor: 0.704
[ 2.359998]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[1] = 990
[ 2.367782]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[2] = 990
[ 2.375617]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[3] = 1134
[ 2.383494]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[4] = 1223
[ 2.391416]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[5] = 1385
[ 2.399292]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[6] = 1480
[ 2.407213]@2 cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[7] = 1480
[ 2.415239]@2 cpr_fill_override_voltage: apc1_corner: floor override voltage: [790000 790000 820000 850000 940000 990000 990000] uV
[ 2.427068]@2 cpr_config: apc1_corner: Timer count: 0x17700 (for 5000 us)
[ 2.434396]@2 apc1_corner: 0 <--> 0 mV
[ 2.438470]@2 cpr2_gfx_allocate_memory: gfx_corner: ro_count = 8
[ 2.444091]@2 cpr_efuse_init: gfx_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 2.451541]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[1]: 815000 -> 760000 uV
[ 2.460499]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[3]: 900000 -> 840000 uV
[ 2.469640]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[5]: 900000 -> 960000 uV
[ 2.478727]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[7]: 1015000 -> 1075000 uV
[ 2.488041]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[9]: 1115000 -> 1165000 uV
[ 2.497316]@2 cpr_pvs_init: gfx_corner: pvs voltage: [760000 815000 840000 900000 960000 1015000 1075000 1115000 1165000] uV
[ 2.508527]@2 cpr_pvs_init: gfx_corner: ceiling voltage: [810000 865000 900000 950000 1010000 1050000 1110000 1165000 1165000] uV
[ 2.520155]@2 cpr_pvs_init: gfx_corner: floor voltage: [755000 755000 755000 795000 835000 855000 920000 945000 945000] uV
[ 2.532527]@2 platform 98000.regulator: Driver qcom,cpr2-gfx-regulator requests probe deferral
[ 2.540711]@2 i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 2.546234]@2 i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[ 2.552436]@2 i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[ 2.559200]@2 platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 2.566776]@2 i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[ 2.572300]@2 i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
[ 2.578563]@2 i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
[ 2.585320]@2 platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 2.592879]@2 i2c-msm-v2 7af6000.i2c: probing driver i2c-msm-v2
[ 2.598688]@2 i2c-msm-v2 7af6000.i2c: error on clk_get(core_clk):-517
[ 2.604691]@2 i2c-msm-v2 7af6000.i2c: error probe() failed with err:-517
[ 2.611451]@2 platform 7af6000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 2.619004]@2 i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
[ 2.624551]@2 i2c-msm-v2 7af8000.i2c: error on clk_get(core_clk):-517
[ 2.630819]@2 i2c-msm-v2 7af8000.i2c: error probe() failed with err:-517
[ 2.637577]@2 platform 7af8000.i2c: Driver i2c-msm-v2 requests probe deferral
[ 2.645442]@2 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[ 2.656938]@2 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
[ 2.663340]@2 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[ 2.671123]@2 msm-thermal qcom,msm-thermal.55: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-req. err=-517. KTM continues
[ 2.684345]@2 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[ 2.696288]@2 platform qcom,msm-thermal.55: Driver msm-thermal requests probe deferral
[ 2.773522]@2 qcom,gcc-8976 1800000.qcom,gcc: Registered GCC clocks
[ 2.779153]@2 cpu-clock-8976 b114000.qcom,cpu-clock-8976: Speed bin: 0 PVS Version: 0
[ 2.795422]@2 clock_rcgwr_init: RCGwR Init Completed
[ 2.801209]@2 populate_opp_table: clock-cpu-8976: OPP tables populated (cpu 3 and 7)
[ 2.807917]@2 print_opp_table: clock_cpu: a53: OPP voltage for 400000000: 830000
[ 2.815334]@2 print_opp_table: clock_cpu: a53: OPP voltage for 1401600000: 1095000
[ 2.822845]@2 print_opp_table: clock_cpu: a72: OPP voltage for 400000000: 860000
[ 2.830247]@2 print_opp_table: clock_cpu: a72: OPP voltage for 1747200000: 1085000
[ 2.838539]@2 qcom,cpu-spm-8976 b111200.qcom,spm: Registered CPU SPM clocks
[ 2.845931]@2 cpr2_gfx_allocate_memory: gfx_corner: ro_count = 8
[ 2.851385]@2 cpr_efuse_init: gfx_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 2.858966]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[1]: 815000 -> 760000 uV
[ 2.867919]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[3]: 900000 -> 840000 uV
[ 2.877061]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[5]: 900000 -> 960000 uV
[ 2.886148]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[7]: 1015000 -> 1075000 uV
[ 2.895461]@2 cpr_adjust_init_voltages: gfx_corner: adjusted initial voltage[9]: 1115000 -> 1165000 uV
[ 2.904733]@2 cpr_pvs_init: gfx_corner: pvs voltage: [760000 815000 840000 900000 960000 1015000 1075000 1115000 1165000] uV
[ 2.915947]@2 cpr_pvs_init: gfx_corner: ceiling voltage: [810000 865000 900000 950000 1010000 1050000 1110000 1165000 1165000] uV
[ 2.927575]@2 cpr_pvs_init: gfx_corner: floor voltage: [755000 755000 755000 795000 835000 855000 920000 945000 945000] uV
[ 2.939519]@2 cpr_init_target_quotients: gfx_corner: Corner[1]: Target quotients: 513 489 620 574 237 272 144 177
[ 2.948935]@2 cpr_init_target_quotients: gfx_corner: Corner[2]: Target quotients: 575 547 688 638 272 312 169 206
[ 2.959260]@2 cpr_init_target_quotients: gfx_corner: Corner[3]: Target quotients: 706 672 819 765 363 410 241 287
[ 2.969589]@2 cpr_init_target_quotients: gfx_corner: Corner[4]: Target quotients: 768 741 890 843 404 450 277 323
[ 2.979918]@2 cpr_init_target_quotients: gfx_corner: Corner[5]: Target quotients: 917 880 1039 982 514 562 369 421
[ 2.990334]@2 cpr_init_target_quotients: gfx_corner: Corner[6]: Target quotients: 998 960 1126 1069 571 617 422 472
[ 3.000838]@2 cpr_init_target_quotients: gfx_corner: Corner[7]: Target quotients: 1074 1028 1198 1135 635 675 483 531
[ 3.011516]@2 cpr_init_target_quotients: gfx_corner: Corner[8]: Target quotients: 1188 1135 1317 1246 720 753 562 605
[ 3.022192]@2 cpr_init_target_quotients: gfx_corner: Corner[9]: Target quotients: 1276 1212 1405 1323 776 816 604 654
[ 3.032904]@2 cpr_init_cpr_parameters: gfx_corner: step_quotient = 16
[ 3.039271]@2 cpr_init_cpr_parameters: gfx_corner: up threshold = 2, down threshold = 4
[ 3.047290]@2 cpr_init_cpr_parameters: gfx_corner: CPR is enabled by default.
[ 3.054401]@2 cpr_config: gfx_corner: Timer count: 0x17700 (for 5000 us)
[ 3.061821]@2 gfx_corner: 0 <--> 0 mV
[ 3.066189]@2 i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 3.071377]@2 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 3.080360]@2 i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 3.091177]@1 kworker/u16:2 (68) used greatest stack depth: 13896 bytes left
[ 3.101162]@2 i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[ 3.106348]@2 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 3.115384]@2 i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 3.126972]@0 kworker/u16:2 (78) used greatest stack depth: 13656 bytes left
[ 3.134346]@2 i2c i2c-4: Failed to register i2c client dsx-i2c at 0x20 (-16)
[ 3.140406]@2 i2c i2c-4: of_i2c: Failure registering /soc/i2c@78b8000/synaptics_dsx@20
[ 3.149884]@2 i2c-msm-v2 7af6000.i2c: probing driver i2c-msm-v2
[ 3.155126]@2 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 3.164057]@2 i2c-msm-v2 7af6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 3.175503]@2 i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
[ 3.180680]@2 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 3.189720]@2 i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 3.200480]@2 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[ 3.207508]@2 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[ 3.219305]@2 msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[ 3.227176]@0 zll----calling---level=3 __initcall_deferred_probe_initcall3s+0x0/0x8 @
[ 3.239084]@3 gcc-gfx-8976 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
[ 3.245437]@3 clock-gpu: OPP voltage for 133333333 Hz: 1 uV
[ 3.250564]@3 clock-gpu: OPP voltage for 200000000 Hz: 2 uV
[ 3.256150]@3 clock-gpu: OPP voltage for 266666667 Hz: 3 uV
[ 3.261675]@3 clock-gpu: OPP voltage for 300000000 Hz: 4 uV
[ 3.267252]@3 clock-gpu: OPP voltage for 366670000 Hz: 5 uV
[ 3.272786]@3 clock-gpu: OPP voltage for 432000000 Hz: 6 uV
[ 3.278363]@3 clock-gpu: OPP voltage for 480000000 Hz: 7 uV
[ 3.283898]@3 clock-gpu: OPP voltage for 550000000 Hz: 8 uV
[ 3.289474]@3 clock-gpu: OPP voltage for 600000000 Hz: 9 uV
[ 3.295768]@3 zll----calling---level=3 __initcall_msm_gcc_gfx_init3s+0x0/0x8 @
[ 3.406916]@3 zll----calling---level=4 __initcall_param_sysfs_init4+0x0/0x8 @
[ 3.413226]@3 zll----calling---level=4 __initcall_pm_sysrq_init4+0x0/0x8 @
[ 3.421559]@3 zll----calling---level=4 __initcall_default_bdi_init4+0x0/0x8 @
[ 3.428179]@3 bio: create slab
[ 3.432599]@2 zll----calling---level=4 __initcall_init_bio4+0x0/0x8 @
[ 3.438783]@2 zll----calling---level=4 __initcall_fsnotify_notification_init4+0x0/0x8 @
[ 3.447078]@2 zll----calling---level=4 __initcall_crypto_wq_init4+0x0/0x8 @
[ 3.453900]@2 zll----calling---level=4 __initcall_cryptomgr_init4+0x0/0x8 @
[ 3.461022]@2 zll----calling---level=4 __initcall_cryptd_init4+0x0/0x8 @
[ 3.467874]@2 zll----calling---level=4 __initcall_blk_settings_init4+0x0/0x8 @
[ 3.475279]@2 zll----calling---level=4 __initcall_blk_ioc_init4+0x0/0x8 @
[ 3.482203]@2 zll----calling---level=4 __initcall_blk_softirq_init4+0x0/0x8 @
[ 3.489466]@2 zll----calling---level=4 __initcall_blk_iopoll_setup4+0x0/0x8 @
[ 3.497487]@2 zll----calling---level=4 __initcall_genhd_device_init4+0x0/0x8 @
[ 3.504206]@2 zll----calling---level=4 __initcall_gpiolib_debugfs_init4+0x0/0x8 @
[ 3.513975]@2 qcom,qpnp-pin qpnp-pin-ffffffc0dea9ac00: qpnp_pin_probe: no device nodes specified in topology
[ 3.522831]@2 qcom,qpnp-pin: probe of qpnp-pin-ffffffc0dea9ac00 failed with error -22
[ 3.531490]@2 zll----calling---level=4 __initcall_qpnp_pin_init4+0x0/0x8 @
[ 3.537699]@2 zll----calling---level=4 __initcall_pwm_debugfs_init4+0x0/0x8 @
[ 3.545078]@2 zll----calling---level=4 __initcall_qpnp_lpg_init4+0x0/0x8 @
[ 3.552044]@2 zll----calling---level=4 __initcall_pci_slot_init4+0x0/0x8 @
[ 3.559137]@2 zll----calling---level=4 __initcall_fbmem_init4+0x0/0x8 @
[ 3.568754]@2 gladiator_error_reporting b1c0000.qcom,msm-gladiator: MSM Gladiator Error Reporting Initialized
[ 3.578380]@2 zll----calling---level=4 __initcall_init_gladiator_erp4+0x0/0x8 @
[ 3.585973]@2 KPI: Bootloader start count = 25181
[ 3.589813]@2 KPI: Bootloader end count = 90158
[ 3.594292]@2 KPI: Bootloader display count = 52384
[ 3.599153]@2 KPI: Bootloader load kernel count = 1228
[ 3.604301]@2 KPI: Kernel MPM timestamp = 300193
[ 3.608875]@2 KPI: Kernel MPM Clock frequency = 32768
[ 3.613941]@2 socinfo_print: v10, id=278, ver=1.1, raw_id=2448, raw_ver=1, hw_plat=8, hw_plat_ver=65536
[ 3.613941]@2 accessory_chip=0, hw_plat_subtype=0, pmic_model=65552, pmic_die_revision=131072 foundry_id=5 serial_number=1960422
[ 3.634950]@2 zll----calling---level=4 __initcall_socinfo_init4+0x0/0x8 @
[ 3.643049]@2 zll----calling---level=4 __initcall_ocmem_init4+0x0/0x8 @
[ 3.649313]@2 zll----calling---level=4 __initcall_sysmon_init4+0x0/0x8 @
[ 3.656931]@2 eldo2_8976: no parameters
[ 3.661071]@2 adv_vreg: no parameters
[ 3.664479]@2 zll----calling---level=4 __initcall_regulator_fixed_voltage_init4+0x0/0x8 @
[ 3.672221]@2 zll----calling---level=4 __initcall_tps65132_init4+0x0/0x8 @
[ 3.679234]@2 zll----calling---level=4 __initcall_misc_init4+0x0/0x8 @
[ 3.686026]@2 vgaarb: loaded
[ 3.688613]@2 zll----calling---level=4 __initcall_vga_arb_device_init4+0x0/0x8 @
[ 3.696261]@2 zll----calling---level=4 __initcall_dma_buf_init4+0x0/0x8 @
[ 3.704328]@2 zll----calling---level=4 __initcall_wcd9xxx_irq_drv_init4+0x0/0x8 @
[ 3.713707]@2 SCSI subsystem initialized
[ 3.716596]@2 zll----calling---level=4 __initcall_init_scsi4+0x0/0x8 @
[ 3.724465]@2 zll----calling---level=4 __initcall_swrm_init4+0x0/0x8 @
[ 3.730452]@2 zll----calling---level=4 __initcall_phy_init4+0x0/0x8 @
[ 3.737367]@2 usbcore: registered new interface driver usbfs
[ 3.742612]@2 usbcore: registered new interface driver hub
[ 3.748394]@2 usbcore: registered new device driver usb
[ 3.753045]@2 zll----calling---level=4 __initcall_usb_init4+0x0/0x8 @
[ 3.759757]@2 zll----calling---level=4 __initcall_usb_udc_init4+0x0/0x8 @
[ 3.766744]@2 zll----calling---level=4 __initcall_serio_init4+0x0/0x8 @
[ 3.773553]@2 zll----calling---level=4 __initcall_input_init4+0x0/0x8 @
[ 3.780210]@2 zll----calling---level=4 __initcall_rtc_init4+0x0/0x8 @
[ 3.786746]@2 media: Linux media interface: v0.10
[ 3.791564]@2 zll----calling---level=4 __initcall_media_devnode_init4+0x0/0x8 @
[ 3.798898]@2 Linux video capture interface: v2.00
[ 3.803726]@2 zll----calling---level=4 __initcall_videodev_init4+0x0/0x8 @
[ 3.810832]@2 zll----calling---level=4 __initcall_power_supply_class_init4+0x0/0x8 @
[ 3.819051]@2 BATTERY: batterydata_init: Battery-data device created!
[ 3.825033]@2 zll----calling---level=4 __initcall_batterydata_init4+0x0/0x8 @
[ 3.832378]@2 zll----calling---level=4 __initcall_hwmon_init4+0x0/0x8 @
[ 3.839090]@2 EDAC MC: Ver: 3.0.0
[ 3.843248]@2 zll----calling---level=4 __initcall_edac_init4+0x0/0x8 @
[ 3.853033]@2 cpufreq: driver msm up and running
[ 3.856615]@2 zll----calling---level=4 __initcall_msm_cpufreq_register4+0x0/0x8 @
[ 3.864517]@4 zll----calling---level=4 __initcall_mmc_init4+0x0/0x8 @
[ 3.870866]@4 zll----calling---level=4 __initcall_leds_init4+0x0/0x8 @
[ 3.878075]@4 cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
[ 3.884016]@4 ION-heap mm: Cannot specify alignment for this type of heap
[ 3.890835]@4 cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 3.897649]@4 ION heap system created
[ 3.901116]@4 ION heap kmalloc created
[ 3.904660]@4 ION heap mm created at 0x00000000f7c00000 with size 8100000
[ 3.911404]@4 ION heap qsecom created at 0x00000000f6c00000 with size 1000000
[ 3.918511]@4 ION heap audio created at 0x00000000f5400000 with size 314000
[ 3.925998]@4 zll----calling---level=4 __initcall_msm_ion_init4+0x0/0x8 @
[ 3.932387]@4 msm_bus_fabric_init_driver
[ 3.936526]@4 msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 3.941487]@4 msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 3.946719]@4 msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 3.951997]@4 msm_bus_device 580000.ad-hoc-bus: Dev 2048
[ 3.962200]@4 msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 3.966723]@4 msm_bus_init_clk: Valid node clk node 0 ctx 1
[ 3.972463]@4 msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 3.978095]@4 msm_bus_init_clk: Valid node clk node 4096 ctx 1
[ 3.984040]@4 msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 3.989727]@4 msm_bus_init_clk: Valid node clk node 1024 ctx 1
[ 3.995674]@4 msm_bus_init_clk: Valid node clk node 2048 ctx 0
[ 4.001358]@4 msm_bus_init_clk: Valid node clk node 2048 ctx 1
[ 4.019982]@4 zll----calling---level=4 __initcall_msm_bus_device_init_driver4+0x0/0x8 @
[ 4.027868]@4 ipa ipa_uc_state_check:292 uC interface not initialized
[ 4.033536]@4 ipa ipa_sps_irq_control_all:868 EP (2) not allocated.
[ 4.039795]@4 ipa ipa_sps_irq_control_all:868 EP (5) not allocated.
[ 4.047734]@4 sps:BAM 0x0000000007904000 is registered.
[ 4.052910]@4 sps:BAM 0x0000000007904000 (va:0xffffff80014c0000) enabled: ver:0x27, number of pipes:20
[ 4.076854]@4 IPA driver initialization was successful.
[ 4.081357]@4 zll----calling---level=4 __initcall_ipa_module_init4+0x0/0x8 @
[ 4.088400]@4 PMIC@SID0: PM8950 v2.0 options: 0, 2, 0, 0
[ 4.093647]@4 PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
[ 4.099040]@4 PMIC@SID4: PM8004 v1.0 options: 0, 0, 0, 0
[ 4.104242]@4 zll----calling---level=4 __initcall_qpnp_revid_init4+0x0/0x8 @
[ 4.112105]@4 gdsc_venus: no parameters
[ 4.115655]@4 gdsc_mdss: no parameters
[ 4.119442]@4 gdsc_jpeg: no parameters
[ 4.123250]@4 gdsc_vfe: no parameters
[ 4.126762]@4 gdsc_vfe1: no parameters
[ 4.130456]@4 gdsc_cpp: no parameters
[ 4.134110]@4 gdsc_oxili_gx: no parameters
[ 4.137881]@4 gdsc_oxili_gx: supplied by gfx_corner
[ 4.143110]@4 gdsc_venus_core0: fast normal
[ 4.147314]@4 gdsc_oxili_cx: no parameters
[ 4.151292]@4 zll----calling---level=4 __initcall_gdsc_init4+0x0/0x8 @
[ 4.158047]@4 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 4.163442]@4 mdss_pll_util_resource_parse: dfps not enabled!
[ 4.169819]@4 dsi_pll_clock_register_hpm: Registered DSI PLL:0 clocks successfully
[ 4.176752]@4 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 4.182462]@4 mdss_pll_util_resource_parse: dfps not enabled!
[ 4.189097]@4 dsi_pll_clock_register_hpm: Registered DSI PLL:1 clocks successfully
[ 4.196292]@4 zll----calling---level=4 __initcall_mdss_pll_driver_init4+0x0/0x8 @
[ 4.203347]@4 zll----calling---level=4 __initcall_msm_iommu_init4+0x0/0x8 @
[ 4.210675]@4 msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8001720000, with 3 ctx banks
[ 4.222127]@4 msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001c00000, with 27 ctx banks
[ 4.238179]@4 msm_iommu_ctx 1f08000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 4.245035]@4 msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_secure using bank 1
[ 4.252783]@4 msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 4.260431]@4 msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
[ 4.267905]@4 msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
[ 4.275881]@4 msm_iommu_ctx 1e22000.qcom,iommu-ctx: context adsp_sec_bitstream using bank 2
[ 4.284238]@4 msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
[ 4.291673]@4 msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
[ 4.300078]@4 msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
[ 4.308531]@4 msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
[ 4.316587]@4 msm_iommu_ctx 1e27000.qcom,iommu-ctx: context venus_enc using bank 7
[ 4.324189]@4 msm_iommu_ctx 1e28000.qcom,iommu-ctx: context mdp_1 using bank 8
[ 4.331407]@4 msm_iommu_ctx 1e29000.qcom,iommu-ctx: context periph_rpm using bank 9
[ 4.339026]@5 msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context lpass using bank 10
[ 4.346272]@5 msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context pronto_pil using bank 11
[ 4.354042]@5 msm_iommu_ctx 1e2c000.qcom,iommu-ctx: context q6 using bank 12
[ 4.361021]@5 msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
[ 4.368490]@5 msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
[ 4.376402]@5 msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
[ 4.384216]@5 msm_iommu_ctx 1e32000.qcom,iommu-ctx: context lpass_stream using bank 18
[ 4.392099]@5 msm_iommu_ctx 1e33000.qcom,iommu-ctx: context cpp using bank 19
[ 4.399224]@5 msm_iommu_ctx 1e34000.qcom,iommu-ctx: context jpeg_enc0 using bank 20
[ 4.406945]@5 msm_iommu_ctx 1e35000.qcom,iommu-ctx: context vfe using bank 21
[ 4.414023]@5 msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
[ 4.421596]@5 msm_iommu_ctx 1e37000.qcom,iommu-ctx: context mdp_0 using bank 23
[ 4.428870]@5 msm_iommu_ctx 1e38000.qcom,iommu-ctx: context pronto_buf using bank 24
[ 4.436538]@5 msm_iommu_ctx 1e39000.qcom,iommu-ctx: context mss_nav using bank 25
[ 4.444040]@5 msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context ipa_shared using bank 26
[ 4.451745]@5 msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context ipa_wlan using bank 27
[ 4.459305]@5 msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context ipa_uc using bank 28
[ 4.466533]@5 zll----calling---level=4 __initcall_msm_iommu_driver_init4+0x0/0x8 @
[ 4.475588]@2 zll----calling---level=4 __initcall_msm_iommu_sec_init4+0x0/0x8 @
[ 4.482362]@5 zll----calling---level=4 __initcall_devfreq_init4+0x0/0x8 @
[ 4.488986]@5 zll----calling---level=4 __initcall_devfreq_simple_ondemand_init4+0x0/0x8 @
[ 4.497305]@5 zll----calling---level=4 __initcall_devfreq_performance_init4+0x0/0x8 @
[ 4.505300]@5 zll----calling---level=4 __initcall_devfreq_powersave_init4+0x0/0x8 @
[ 4.513103]@5 zll----calling---level=4 __initcall_devfreq_userspace_init4+0x0/0x8 @
[ 4.521066]@5 zll----calling---level=4 __initcall_devfreq_cpufreq_init4+0x0/0x8 @
[ 4.528555]@5 zll----calling---level=4 __initcall_msm_adreno_tz_init4+0x0/0x8 @
[ 4.536031]@5 zll----calling---level=4 __initcall_devfreq_gpubw_init4+0x0/0x8 @
[ 4.543485]@5 zll----calling---level=4 __initcall_devfreq_vbif_init4+0x0/0x8 @
[ 4.550913]@5 zll----calling---level=4 __initcall_sensors_init4+0x0/0x8 @
[ 4.557831]@5 zll----calling---level=4 __initcall_init_soundcore4+0x0/0x8 @
[ 4.565013]@5 Advanced Linux Sound Architecture Driver Initialized.
[ 4.571176]@5 zll----calling---level=4 __initcall_alsa_sound_init4+0x0/0x8 @
[ 4.578989]@5 zll----calling---level=4 __initcall_wsa_irq_drv_init4+0x0/0x8 @
[ 4.585792]@5 zll----calling---level=4 __initcall_audio_cal_init4+0x0/0x8 @
[ 4.592820]@5 zll----calling---level=4 __initcall_proto_init4+0x0/0x8 @
[ 4.600033]@5 zll----calling---level=4 __initcall_net_dev_init4+0x0/0x8 @
[ 4.606518]@5 zll----calling---level=4 __initcall_neigh_init4+0x0/0x8 @
[ 4.613278]@5 zll----calling---level=4 __initcall_fib_rules_init4+0x0/0x8 @
[ 4.620418]@5 zll----calling---level=4 __initcall_pktsched_init4+0x0/0x8 @
[ 4.627426]@5 zll----calling---level=4 __initcall_tc_filter_init4+0x0/0x8 @
[ 4.634553]@5 zll----calling---level=4 __initcall_tc_action_init4+0x0/0x8 @
[ 4.641728]@5 zll----calling---level=4 __initcall_genl_init4+0x0/0x8 @
[ 4.648415]@5 zll----calling---level=4 __initcall_sysfs_ipv4_init4+0x0/0x8 @
[ 4.655551]@5 Bluetooth: Core ver 2.16
[ 4.659349]@5 NET: Registered protocol family 31
[ 4.663883]@5 Bluetooth: HCI device and connection manager initialized
[ 4.670417]@5 Bluetooth: HCI socket layer initialized
[ 4.675437]@5 Bluetooth: L2CAP socket layer initialized
[ 4.680679]@5 Bluetooth: SCO socket layer initialized
[ 4.685672]@5 zll----calling---level=4 __initcall_bt_init4+0x0/0x8 @
[ 4.692559]@5 cfg80211: Calling CRDA to update world regulatory domain
[ 4.698725]@5 cfg80211: World regulatory domain updated:
[ 4.699115]@5 zll----calling---level=4 __initcall_cfg80211_init4+0x0/0x8 @
[ 4.699120]@5 zll----calling---level=4 __initcall_wireless_nlevent_init4+0x0/0x8 @
[ 4.699231]@5 zll----calling---level=4 __initcall_rfkill_init4+0x0/0x8 @
[ 4.699243]@5 zll----calling---level=4 __initcall_activity_stats_init4+0x0/0x8 @
[ 4.699281]@5 zll----calling---level=4 __initcall_deferred_probe_initcall4s+0x0/0x8 @
[ 4.699530]@5 zll----calling---level=5 __initcall_create_debug_debugfs_entry5+0x0/0x8 @
[ 4.699532]@5 zll----calling---level=5 __initcall_dma_debug_do_init5+0x0/0x8 @
[ 4.699535]@5 Switching to clocksource arch_sys_counter
[ 4.761917]@5 cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.761923]@5 zll----calling---level=5 __initcall_clocksource_done_booting5+0x0/0x8 @
[ 4.761980]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1305600. Temp:60
[ 4.761983]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1305600. Temp:60
[ 4.761985]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1305600. Temp:60
[ 4.761988]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1305600. Temp:60
[ 4.761991]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU4 max frequency to 1382400. Temp:60
[ 4.761994]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU5 max frequency to 1382400. Temp:60
[ 4.761996]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU6 max frequency to 1382400. Temp:60
[ 4.761999]@5 msm_thermal:do_cluster_freq_ctrl Limiting CPU7 max frequency to 1382400. Temp:60
[ 4.762965]@5 zll----calling---level=5 __initcall_tracer_init_debugfs5+0x0/0x8 @
[ 4.762978]@5 zll----calling---level=5 __initcall_init_trace_printk_function_export5+0x0/0x8 @
[ 4.815071]@5 zll----calling---level=5 __initcall_event_trace_init5+0x0/0x8 @
[ 4.815172]@5 zll----calling---level=5 __initcall_init_pipe_fs5+0x0/0x8 @
[ 4.815225]@5 zll----calling---level=5 __initcall_eventpoll_init5+0x0/0x8 @
[ 4.815288]@5 zll----calling---level=5 __initcall_anon_inode_init5+0x0/0x8 @
[ 4.815290]@5 zll----calling---level=5 __initcall_blk_scsi_ioctl_init5+0x0/0x8 @
[ 4.815337]@5 zll----calling---level=5 __initcall_dynamic_debug_init_debugfs5+0x0/0x8 @
[ 4.816456]@5 zll----calling---level=5 __initcall_chr_dev_init5+0x0/0x8 @
[ 4.816493]@5 zll----calling---level=5 __initcall_firmware_class_init5+0x0/0x8 @
[ 4.816521]@5 zll----calling---level=5 __initcall_msm_bcl_init_driver5+0x0/0x8 @
[ 4.816523]@5 bcl_peripheral:bcl_perph_init BCL Initialized
[ 4.817794]@5 zll----calling---level=5 __initcall_bcl_perph_init5+0x0/0x8 @
[ 4.818341]@5 zll----calling---level=5 __initcall_msm_pm_debug_counters_init5+0x0/0x8 @
[ 4.818414]@5 zll----calling---level=5 __initcall_thermal_init5+0x0/0x8 @
[ 4.818418]@5 zll----calling---level=5 __initcall_cpufreq_gov_performance_init5+0x0/0x8 @
[ 4.818447]@5 zll----calling---level=5 __initcall_sysctl_core_init5+0x0/0x8 @
[ 4.818568]@5 NET: Registered protocol family 2
[ 4.819781]@5 TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 4.820647]@5 TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 4.820874]@5 TCP: Hash tables configured (established 32768 bind 32768)
[ 4.821032]@5 TCP: reno registered
[ 4.821269]@5 UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 4.821529]@5 UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 4.821966]@5 zll----calling---level=5 __initcall_inet_init5+0x0/0x8 @
[ 4.821970]@5 zll----calling---level=5 __initcall_ipv4_offload_init5+0x0/0x8 @
[ 4.821995]@5 NET: Registered protocol family 1
[ 4.822031]@5 zll----calling---level=5 __initcall_af_unix_init5+0x0/0x8 @
[ 4.822036]@5 zll----calling---level=5 __initcall_ipv6_offload_init5+0x0/0x8 @
[ 4.822040]@5 PCI: CLS 0 bytes, default 64
[ 4.822043]@5 zll----calling---level=5 __initcall_pci_apply_final_quirks5s+0x0/0x8 @
[ 4.822094]@5 zll----calling---level=5 __initcall_deferred_probe_initcall5s+0x0/0x8 @
[ 4.822676]@5 zll----calling---level=5 __initcall_msm_gcc_mdss_init5s+0x0/0x8 @
[ 4.822959]@5 zll----calling---level=5 __initcall_msm_gcc_mdss_init5s+0x0/0x8 @
[ 4.823215]@5 zll----calling---level=5 __initcall_msm_gcc_mdss_init5s+0x0/0x8 @
[ 4.824733]@5 gcc-mdss-8976 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
[ 4.825039]@5 zll----calling---level=5 __initcall_msm_gcc_mdss_init5s+0x0/0x8 @
[ 4.825385]@5 Trying to unpack rootfs image as initramfs...
[ 4.871430]@5 Freeing initrd memory: 1664K (ffffffc002000000 - ffffffc0021a0000)
[ 4.871444]@5 zll----calling---level=5 __initcall_populate_rootfsrootfs+0x0/0x8 @
[ 4.872284]@5 zll----calling---level=6 __initcall_register_pmu_driver6+0x0/0x8 @
[ 4.872460]@5 zll----calling---level=6 __initcall_cpu_feature_match_SHA1_init6+0x0/0x8 @
[ 4.872791]@5 zll----calling---level=6 __initcall_cpu_feature_match_SHA2_init6+0x0/0x8 @
[ 4.872940]@5 zll----calling---level=6 __initcall_cpu_feature_match_PMULL_init6+0x0/0x8 @
[ 4.873088]@5 zll----calling---level=6 __initcall_cpu_feature_match_AES_init6+0x0/0x8 @
[ 4.873235]@5 zll----calling---level=6 __initcall_aes_mod_init6+0x0/0x8 @
[ 4.874481]@5 zll----calling---level=6 __initcall_cpu_feature_match_AES_init6+0x0/0x8 @
[ 4.875669]@5 zll----calling---level=6 __initcall_aes_init6+0x0/0x8 @
[ 4.875690]@5 zll----calling---level=6 __initcall_proc_execdomains_init6+0x0/0x8 @
[ 4.875709]@5 zll----calling---level=6 __initcall_ioresources_init6+0x0/0x8 @
[ 4.875747]@5 zll----calling---level=6 __initcall_uid_cache_init6+0x0/0x8 @
[ 4.875765]@5 zll----calling---level=6 __initcall_init_posix_timers6+0x0/0x8 @
[ 4.875767]@5 zll----calling---level=6 __initcall_init_posix_cpu_timers6+0x0/0x8 @
[ 4.875778]@5 zll----calling---level=6 __initcall_proc_schedstat_init6+0x0/0x8 @
[ 4.875788]@5 zll----calling---level=6 __initcall_init_sched_debug_procfs6+0x0/0x8 @
[ 4.875792]@5 zll----calling---level=6 __initcall_suspend_time_syscore_init6+0x0/0x8 @
[ 4.875795]@5 zll----calling---level=6 __initcall_irq_pm_init_ops6+0x0/0x8 @
[ 4.875797]@5 zll----calling---level=6 __initcall_create_proc_profile6+0x0/0x8 @
[ 4.875800]@5 zll----calling---level=6 __initcall_timekeeping_init_ops6+0x0/0x8 @
[ 4.876060]@5 zll----calling---level=6 __initcall_init_clocksource_sysfs6+0x0/0x8 @
[ 4.876071]@5 zll----calling---level=6 __initcall_init_timer_list_procfs6+0x0/0x8 @
[ 4.876602]@5 zll----calling---level=6 __initcall_alarmtimer_init6+0x0/0x8 @
[ 4.876605]@5 zll----calling---level=6 __initcall_sched_clock_syscore_init6+0x0/0x8 @
[ 4.876620]@5 zll----calling---level=6 __initcall_init_tstats_procfs6+0x0/0x8 @
[ 4.876629]@5 zll----calling---level=6 __initcall_futex_init6+0x0/0x8 @
[ 4.876641]@5 zll----calling---level=6 __initcall_proc_modules_init6+0x0/0x8 @
[ 4.876642]@5 Initialise module verification
[ 4.876697]@5 zll----calling---level=6 __initcall_module_verify_init6+0x0/0x8 @
[ 4.876708]@5 zll----calling---level=6 __initcall_kallsyms_init6+0x0/0x8 @
[ 4.876720]@5 zll----calling---level=6 __initcall_ikconfig_init6+0x0/0x8 @
[ 4.876722]@5 audit: initializing netlink socket (disabled)
[ 4.876769]@5 type=2000 audit(4.729:1): initialized
[ 4.876777]@5 zll----calling---level=6 __initcall_audit_init6+0x0/0x8 @
[ 4.876804]@5 zll----calling---level=6 __initcall_utsname_sysctl_init6+0x0/0x8 @
[ 4.876807]@5 zll----calling---level=6 __initcall_init_tracepoints6+0x0/0x8 @
[ 4.876814]@5 zll----calling---level=6 __initcall_init_blk_tracer6+0x0/0x8 @
[ 5.388276]@5 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.396020]@5 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.403912]@5 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.411800]@5 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 5.419730]@5 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 5.427614]@5 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 5.435509]@5 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 5.443423]@5 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 5.453533]@4 zll----calling---level=6 __initcall_msm_rtb_init6+0x0/0x8 @
[ 5.459458]@4 zll----calling---level=6 __initcall_ipc_logging_init6+0x0/0x8 @
[ 5.467172]@4 zll----calling---level=6 __initcall_perf_event_sysfs_init6+0x0/0x8 @
[ 5.474566]@4 zll----calling---level=6 __initcall_init_per_zone_wmark_min6+0x0/0x8 @
[ 5.482607]@4 error setting kswapd cpu affinity mask
[ 5.487322]@4 zll----calling---level=6 __initcall_kswapd_init6+0x0/0x8 @
[ 5.494270]@4 zll----calling---level=6 __initcall_extfrag_debug_init6+0x0/0x8 @
[ 5.501720]@4 zll----calling---level=6 __initcall_setup_vmstat6+0x0/0x8 @
[ 5.508626]@4 zll----calling---level=6 __initcall_mm_sysfs_init6+0x0/0x8 @
[ 5.515647]@4 zll----calling---level=6 __initcall_slab_proc_init6+0x0/0x8 @
[ 5.522751]@4 zll----calling---level=6 __initcall_init_reserve_notifier6+0x0/0x8 @
[ 5.530464]@4 zll----calling---level=6 __initcall_init_admin_reserve6+0x0/0x8 @
[ 5.537940]@4 zll----calling---level=6 __initcall_init_user_reserve6+0x0/0x8 @
[ 5.545330]@4 zll----calling---level=6 __initcall_proc_vmalloc_init6+0x0/0x8 @
[ 5.552741]@4 zll----calling---level=6 __initcall_memblock_init_debugfs6+0x0/0x8 @
[ 5.560422]@4 zll----calling---level=6 __initcall_procswaps_init6+0x0/0x8 @
[ 5.582467]@4 zll----calling---level=6 __initcall_slab_sysfs_init6+0x0/0x8 @
[ 5.588652]@4 zll----calling---level=6 __initcall_process_reclaim_init6+0x0/0x8 @
[ 5.596510]@4 zll----calling---level=6 __initcall_fcntl_init6+0x0/0x8 @
[ 5.603100]@4 zll----calling---level=6 __initcall_proc_filesystems_init6+0x0/0x8 @
[ 5.610937]@4 zll----calling---level=6 __initcall_dio_init6+0x0/0x8 @
[ 5.617541]@4 zll----calling---level=6 __initcall_fsnotify_mark_init6+0x0/0x8 @
[ 5.625224]@4 zll----calling---level=6 __initcall_dnotify_init6+0x0/0x8 @
[ 5.632166]@4 zll----calling---level=6 __initcall_inotify_user_setup6+0x0/0x8 @
[ 5.639567]@4 zll----calling---level=6 __initcall_aio_setup6+0x0/0x8 @
[ 5.645973]@4 zll----calling---level=6 __initcall_proc_locks_init6+0x0/0x8 @
[ 5.653276]@4 zll----calling---level=6 __initcall_init_sys32_ioctl6+0x0/0x8 @
[ 5.660440]@4 zll----calling---level=6 __initcall_init_mbcache6+0x0/0x8 @
[ 5.667408]@4 zll----calling---level=6 __initcall_proc_cmdline_init6+0x0/0x8 @
[ 5.674786]@4 zll----calling---level=6 __initcall_proc_consoles_init6+0x0/0x8 @
[ 5.682250]@4 zll----calling---level=6 __initcall_proc_cpuinfo_init6+0x0/0x8 @
[ 5.689614]@4 zll----calling---level=6 __initcall_proc_devices_init6+0x0/0x8 @
[ 5.697009]@4 zll----calling---level=6 __initcall_proc_interrupts_init6+0x0/0x8 @
[ 5.704646]@4 zll----calling---level=6 __initcall_proc_loadavg_init6+0x0/0x8 @
[ 5.712024]@4 zll----calling---level=6 __initcall_proc_meminfo_init6+0x0/0x8 @
[ 5.719389]@4 zll----calling---level=6 __initcall_proc_stat_init6+0x0/0x8 @
[ 5.726521]@4 zll----calling---level=6 __initcall_proc_uptime_init6+0x0/0x8 @
[ 5.733815]@4 zll----calling---level=6 __initcall_proc_version_init6+0x0/0x8 @
[ 5.741198]@4 zll----calling---level=6 __initcall_proc_softirqs_init6+0x0/0x8 @
[ 5.748659]@4 zll----calling---level=6 __initcall_proc_kmsg_init6+0x0/0x8 @
[ 5.755786]@4 zll----calling---level=6 __initcall_proc_page_init6+0x0/0x8 @
[ 5.763132]@4 zll----calling---level=6 __initcall_configfs_init6+0x0/0x8 @
[ 5.770032]@4 zll----calling---level=6 __initcall_init_devpts_fs6+0x0/0x8 @
[ 5.777411]@4 zll----calling---level=6 __initcall_init_ext3_fs6+0x0/0x8 @
[ 5.784329]@4 zll----calling---level=6 __initcall_init_ext2_fs6+0x0/0x8 @
[ 5.792291]@4 zll----calling---level=6 __initcall_ext4_init_fs6+0x0/0x8 @
[ 5.798210]@4 exFAT: Core Version 1.2.4
[ 5.802047]@4 zll----calling---level=6 __initcall_init_exfat_core6+0x0/0x8 @
[ 5.809233]@4 exFAT: FS Version 1.2.4
[ 5.813072]@4 zll----calling---level=6 __initcall_init_exfat_fs6+0x0/0x8 @
[ 5.820588]@4 zll----calling---level=6 __initcall_journal_init6+0x0/0x8 @
[ 5.827913]@4 zll----calling---level=6 __initcall_journal_init6+0x0/0x8 @
[ 5.833849]@4 zll----calling---level=6 __initcall_init_ramfs_fs6+0x0/0x8 @
[ 5.841190]@4 zll----calling---level=6 __initcall_init_fat_fs6+0x0/0x8 @
[ 5.847738]@4 zll----calling---level=6 __initcall_init_vfat_fs6+0x0/0x8 @
[ 5.854679]@4 zll----calling---level=6 __initcall_init_nls_cp4376+0x0/0x8 @
[ 5.861784]@4 zll----calling---level=6 __initcall_init_nls_ascii6+0x0/0x8 @
[ 5.868914]@4 zll----calling---level=6 __initcall_init_nls_iso8859_16+0x0/0x8 @
[ 5.876379]@4 zll----calling---level=6 __initcall_init_nls_utf86+0x0/0x8 @
[ 5.883409]@4 fuse init (API version 7.23)
[ 5.887959]@4 zll----calling---level=6 __initcall_fuse_init6+0x0/0x8 @
[ 5.894195]@4 msgmni has been set to 7122
[ 5.898182]@4 zll----calling---level=6 __initcall_ipc_init6+0x0/0x8 @
[ 5.904799]@4 zll----calling---level=6 __initcall_ipc_sysctl_init6+0x0/0x8 @
[ 5.911984]@4 zll----calling---level=6 __initcall_key_proc_init6+0x0/0x8 @
[ 5.918987]@4 SELinux: Registering netfilter hooks
[ 5.923869]@4 zll----calling---level=6 __initcall_selinux_nf_ip_init6+0x0/0x8 @
[ 5.932009]@4 zll----calling---level=6 __initcall_init_sel_fs6+0x0/0x8 @
[ 5.938201]@4 zll----calling---level=6 __initcall_selnl_init6+0x0/0x8 @
[ 5.944963]@4 zll----calling---level=6 __initcall_sel_netif_init6+0x0/0x8 @
[ 5.952075]@4 zll----calling---level=6 __initcall_sel_netnode_init6+0x0/0x8 @
[ 5.959355]@4 zll----calling---level=6 __initcall_sel_netport_init6+0x0/0x8 @
[ 5.966660]@4 zll----calling---level=6 __initcall_aurule_init6+0x0/0x8 @
[ 5.973529]@4 zll----calling---level=6 __initcall_crypto_algapi_init6+0x0/0x8 @
[ 5.980968]@4 zll----calling---level=6 __initcall_skcipher_module_init6+0x0/0x8 @
[ 5.988621]@4 zll----calling---level=6 __initcall_chainiv_module_init6+0x0/0x8 @
[ 5.996171]@4 zll----calling---level=6 __initcall_eseqiv_module_init6+0x0/0x8 @
[ 6.003636]@4 zll----calling---level=6 __initcall_seqiv_module_init6+0x0/0x8 @
[ 6.011003]@4 zll----calling---level=6 __initcall_hmac_module_init6+0x0/0x8 @
[ 6.018306]@4 zll----calling---level=6 __initcall_crypto_xcbc_module_init6+0x0/0x8 @
[ 6.026866]@4 zll----calling---level=6 __initcall_crypto_null_mod_init6+0x0/0x8 @
[ 6.034042]@4 zll----calling---level=6 __initcall_md4_mod_init6+0x0/0x8 @
[ 6.040940]@4 zll----calling---level=6 __initcall_md5_mod_init6+0x0/0x8 @
[ 6.047908]@4 zll----calling---level=6 __initcall_sha1_generic_mod_init6+0x0/0x8 @
[ 6.055790]@4 zll----calling---level=6 __initcall_sha256_generic_mod_init6+0x0/0x8 @
[ 6.063687]@4 zll----calling---level=6 __initcall_sha512_generic_mod_init6+0x0/0x8 @
[ 6.071246]@4 zll----calling---level=6 __initcall_crypto_ecb_module_init6+0x0/0x8 @
[ 6.079075]@4 zll----calling---level=6 __initcall_crypto_cbc_module_init6+0x0/0x8 @
[ 6.086885]@4 zll----calling---level=6 __initcall_crypto_module_init6+0x0/0x8 @
[ 6.094350]@4 zll----calling---level=6 __initcall_crypto_ctr_module_init6+0x0/0x8 @
[ 6.102486]@4 zll----calling---level=6 __initcall_des_generic_mod_init6+0x0/0x8 @
[ 6.109949]@4 zll----calling---level=6 __initcall_twofish_mod_init6+0x0/0x8 @
[ 6.117264]@4 zll----calling---level=6 __initcall_aes_init6+0x0/0x8 @
[ 6.124015]@4 zll----calling---level=6 __initcall_arc4_init6+0x0/0x8 @
[ 6.130521]@4 zll----calling---level=6 __initcall_deflate_mod_init6+0x0/0x8 @
[ 6.137829]@4 zll----calling---level=6 __initcall_crc32c_mod_init6+0x0/0x8 @
[ 6.144878]@4 zll----calling---level=6 __initcall_crypto_authenc_module_init6+0x0/0x8 @
[ 6.153030]@4 zll----calling---level=6 __initcall_crypto_authenc_esn_module_init6+0x0/0x8 @
[ 6.161692]@4 zll----calling---level=6 __initcall_krng_mod_init6+0x0/0x8 @
[ 6.168569]@4 Key type asymmetric registered
[ 6.172821]@4 zll----calling---level=6 __initcall_asymmetric_key_init6+0x0/0x8 @
[ 6.180360]@4 Asymmetric key parser 'x509' registered
[ 6.185407]@4 zll----calling---level=6 __initcall_x509_key_init6+0x0/0x8 @
[ 6.192465]@4 zll----calling---level=6 __initcall_proc_genhd_init6+0x0/0x8 @
[ 6.199889]@4 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 6.207199]@4 zll----calling---level=6 __initcall_bsg_init6+0x0/0x8 @
[ 6.213811]@4 io scheduler noop registered
[ 6.217861]@4 zll----calling---level=6 __initcall_noop_init6+0x0/0x8 @
[ 6.224560]@4 io scheduler deadline registered
[ 6.228971]@4 zll----calling---level=6 __initcall_deadline_init6+0x0/0x8 @
[ 6.236191]@4 io scheduler row registered
[ 6.239996]@4 zll----calling---level=6 __initcall_row_init6+0x0/0x8 @
[ 6.246961]@4 io scheduler cfq registered (default)
[ 6.251455]@4 zll----calling---level=6 __initcall_cfq_init6+0x0/0x8 @
[ 6.258123]@4 zll----calling---level=6 __initcall_debug_objects_init_debugfs6+0x0/0x8 @
[ 6.266241]@4 zll----calling---level=6 __initcall_libcrc32c_mod_init6+0x0/0x8 @
[ 6.273691]@4 zll----calling---level=6 __initcall_init_kmp6+0x0/0x8 @
[ 6.280274]@4 zll----calling---level=6 __initcall_init_bm6+0x0/0x8 @
[ 6.286811]@4 zll----calling---level=6 __initcall_init_fsm6+0x0/0x8 @
[ 6.293400]@4 zll----calling---level=6 __initcall_percpu_counter_startup6+0x0/0x8 @
[ 6.301211]@4 zll----calling---level=6 __initcall_audit_classes_init6+0x0/0x8 @
[ 6.312170]@4 platform qcom,smp2pgpio-ssr-smp2p-2-in.21: Driver smp2pgpio requests probe deferral
[ 6.320263]@4 platform qcom,smp2pgpio-ssr-smp2p-2-out.22: Driver smp2pgpio requests probe deferral
[ 6.329223]@4 platform qcom,smp2pgpio-ssr-smp2p-4-in.23: Driver smp2pgpio requests probe deferral
[ 6.338073]@4 platform qcom,smp2pgpio-ssr-smp2p-4-out.24: Driver smp2pgpio requests probe deferral
[ 6.347013]@4 platform qcom,smp2pgpio-ssr-smp2p-1-in.25: Driver smp2pgpio requests probe deferral
[ 6.355867]@4 platform qcom,smp2pgpio-ssr-smp2p-1-out.26: Driver smp2pgpio requests probe deferral
[ 6.364965]@4 platform qcom,smp2pgpio-rdbg-2-in.38: Driver smp2pgpio requests probe deferral
[ 6.373226]@4 platform qcom,smp2pgpio-rdbg-2-out.40: Driver smp2pgpio requests probe deferral
[ 6.381717]@4 platform qcom,smp2pgpio-rdbg-1-in.42: Driver smp2pgpio requests probe deferral
[ 6.390155]@4 platform qcom,smp2pgpio-rdbg-1-out.44: Driver smp2pgpio requests probe deferral
[ 6.398826]@4 zll----calling---level=6 __initcall_smp2p_init6+0x0/0x8 @
[ 6.405211]@4 zll----calling---level=6 __initcall_pci_proc_init6+0x0/0x8 @
[ 6.412393]@4 msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 6.418879]@4 mdss_mdp_probe+0x278/0xfe8->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
[ 6.428963]@4 mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
[ 6.435806]@4 mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
[ 6.443451]@4 mdss_mdp_pipe_addr_setup: type:1 ftchid:9 xinid:4 num:1 ndx:0x2 prio:1
[ 6.451167]@4 mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:2
[ 6.458901]@4 mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:3
[ 6.466718]@4 mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:4
[ 6.474537]@4 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 6.483756]@4 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0
[ 6.491788]@4 mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=1
[ 6.498671]@4 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-mixer-wb-off : doesn't exist in device tree
[ 6.507859]@4 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 6.516989]@4 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
[ 6.526764]@4 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[ 6.532949]@4 register_client_adhoc:Failed to find path.src 36 dest 627
[ 6.538582]@4 mdss_mdp_bus_scale_register: reg_bus_client register failed
[ 6.546135]@4 xlog_status: enable:0, panic:1, dump:2
[ 6.552222]@4 mdss_mdp_probe: mdss version = 0x100b0000, bootloader display is on
[ 6.559373]@4 zll----calling---level=6 __initcall_mdss_mdp_driver_init6+0x0/0x8 @
[ 6.566750]@4 zll----calling---level=6 __initcall_mdss_dsi_ctrl_driver_init6+0x0/0x8 @
[ 6.575905]@4 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 6.581325]@4 mdss_dsi_panel_init: Panel Name = LCD_TYPE_SH1387_HEHUI_AMOLED_HD_500
[ 6.588965]@4 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 6.596698]@4 --backlight--mdss_dsi_parse_backlight_response_curve: blen=256
[ 6.603803]@4 mdss_panel_parse_dt: gr mdss_dsi_parse_backlight_response_curve successful!
[ 6.611966]@4 mdss_dsi_parse_panel_features: ulps feature disabled
[ 6.618113]@4 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 6.625418]@4 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[ 6.632455]@4 mdss_dsi_parse_panel_features:2161, Disp_en gpio not specified
[ 6.639480]@4 no supply entry present: qcom,panel-supply-entries
[ 6.645476]@4 mdss_dsi_parse_gpio_params:3278, Disp_en gpio not specified
[ 6.652239]@4 mdss_dsi_parse_gpio_params:3286, TE gpio not specified
[ 6.658562]@4 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[ 6.664923]@4 mdss_dsi_parse_gpio_params:3317, mode gpio not specified
[ 6.671654]@4 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80014bc000 ctrl_size=300 phy_base=ffffff80014be400 phy_size=280
[ 6.682881]@4 mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff80014e8b80 phy_regulator_size=30
[ 6.692438]@4 mdss_dsi_panel_is_ready status=0x1f3
[ 6.698080]@4 dsi_panel_device_register: Continuous splash enabled
[ 6.732396]@4 mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
[ 6.740748]@4 zll----calling---level=6 __initcall_mdss_dsi_driver_init6+0x0/0x8 @
[ 6.747394]@4 mdss_dsi_status_init: DSI status check interval:5000
[ 6.753562]@4 zll----calling---level=6 __initcall_mdss_dsi_status_init6+0x0/0x8 @
[ 6.761590]@4 mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.3
[ 6.769361]@4 zll----calling---level=6 __initcall_mdss_wb_driver_init6+0x0/0x8 @
[ 6.778198]@4 mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
[ 6.784681]@4 mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
[ 6.792770]@4 mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 6.799394]@4 mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
[ 6.806875]@4 mdss_mdp_splash_init: splash memory reserve failed
[ 6.813123]@4 mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
[ 6.820279]@4 mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
[ 6.828142]@4 mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 6.835135]@4 zll----calling---level=6 __initcall_mdss_fb_init6+0x0/0x8 @
[ 6.842091]@4 zll----calling---level=6 __initcall_adv7533_init6+0x0/0x8 @
[ 6.849403]@4 adsp_audio qcom,msmapr-audio.97: apr_probe: destination is ADSP
[ 6.856675]@4 zll----calling---level=6 __initcall_apr_driver_init6+0x0/0x8 @
[ 6.863693]@4 zll----calling---level=6 __initcall_apr_tal_init6+0x0/0x8 @
[ 6.870933]@4 zll----calling---level=6 __initcall_voice_svc_init6+0x0/0x8 @
[ 6.877680]@4 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 6.885781]@4 zll----calling---level=6 __initcall_msm_audio_ion_init6+0x0/0x8 @
[ 6.893517]@4 zll----calling---level=6 __initcall_adsp_loader_init6+0x0/0x8 @
[ 6.900796]@4 IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 6.908701]@4 IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 6.917264]@4 zll----calling---level=6 __initcall_msm_ipc_router_smd_xprt_init6+0x0/0x8 @
[ 6.925921]@4 zll----calling---level=6 __initcall_msm_rpmstats_init6+0x0/0x8 @
[ 6.933094]@4 zll----calling---level=6 __initcall_msm_rpm_master_stats_init6+0x0/0x8 @
[ 6.940827]@4 msm_rpm_log_probe: OK
[ 6.944410]@4 zll----calling---level=6 __initcall_msm_rpm_log_init6+0x0/0x8 @
[ 6.951540]@4 zll----calling---level=6 __initcall_qmi_interface_init6+0x0/0x8 @
[ 6.959142]@4 zll----calling---level=6 __initcall_smem_log_init6+0x0/0x8 @
[ 6.966790]@4 zll----calling---level=6 __initcall_msm_smp2p_init6+0x0/0x8 @
[ 6.973419]@4 zll----calling---level=6 __initcall_smp2p_sleepstate_init6+0x0/0x8 @
[ 6.980895]@4 zll----calling---level=6 __initcall_smp2p_remote_mock_init6+0x0/0x8 @
[ 6.988727]@4 zll----calling---level=6 __initcall_smp2p_debugfs_init6+0x0/0x8 @
[ 6.996228]@4 zll----calling---level=6 __initcall_smp2p_debugfs_init6+0x0/0x8 @
[ 7.004574]@4 zll----calling---level=6 __initcall_dcc_init6+0x0/0x8 @
[ 7.010608]@4 zll----calling---level=6 __initcall_memshare_pchild_init6+0x0/0x8 @
[ 7.018928]@4 NET: Registered protocol family 27
[ 7.025666]@5 In memshare_probe, Memshare probe success
[ 7.030307]@5 zll----calling---level=6 __initcall_memshare_pdriver_init6+0x0/0x8 @
[ 7.037836]@5 zll----calling---level=6 __initcall_msm_pil_init6+0x0/0x8 @
[ 7.046567]@5 ------------[ cut here ]------------
[ 7.050326]@5 WARNING: at /company/zhengliliang/code/L_6.0_8976/LA.BR.1.3.4-01810-8976.0/kernel/kernel/locking/mutex-debug.c:80 debug_mutex_unlock+0xfc/0x158()
[ 7.064467]@5 DEBUG_LOCKS_WARN_ON(!lock->owner)
[ 7.068808]@5 Modules linked in:
[ 7.072195]@5 CPU: 5 PID: 1 Comm: swapper/0 Not tainted 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 7.081046]@5 Call trace:
[ 7.083655]@5 [
[ 7.089207]@5 [
[ 7.094418]@5 [
[ 7.099625]@5 [
[ 7.105701]@5 [
[ 7.111515]@5 [
[ 7.117506]@5 [
[ 7.123930]@5 [
[ 7.129226]@5 [
[ 7.135822]@5 [
[ 7.141639]@5 [
[ 7.147803]@5 [
[ 7.153704]@5 [
[ 7.159868]@5 [
[ 7.165509]@5 [
[ 7.171238]@5 [
[ 7.176707]@5 [
[ 7.182437]@5 [
[ 7.188165]@5 [
[ 7.194590]@5 [
[ 7.199885]@5 [
[ 7.205614]@5 [
[ 7.211863]@5 [
[ 7.217168]@5 ---[ end trace 174803349a4350cc ]---
[ 7.222491]@5 subsys-pil-tz c200000.qcom,lpass: [adsp]: Error getting proxy unvoting gpio
[ 7.230223]@5 platform c200000.qcom,lpass: Driver subsys-pil-tz requests probe deferral
[ 7.238472]@4 subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
[ 7.246481]@4 platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
[ 7.254862]@4 zll----calling---level=6 __initcall_pil_tz_init6+0x0/0x8 @
[ 7.262830]@4 pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
[ 7.270184]@4 platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
[ 7.277844]@4 zll----calling---level=6 __initcall_pil_mss_init6+0x0/0x8 @
[ 7.284561]@4 zll----calling---level=6 __initcall_init_cpaccess_sysfs6+0x0/0x8 @
[ 7.292051]@4 pacman_init
[ 7.295026]@4 pacman_probe: msm_pacman version 1.1
[ 7.300403]@4 zll----calling---level=6 __initcall_pacman_init6+0x0/0x8 @
[ 7.306272]@4 pacman_test_init
[ 7.309648]@4 pacman_test_probe: msm_test_pacman
[ 7.314152]@4 zll----calling---level=6 __initcall_pacman_test_init6+0x0/0x8 @
[ 7.321616]@4 sm_policy sm_policy: sm_policy_probe
[ 7.326044]@4 zll----calling---level=6 __initcall_sm_policy_init6+0x0/0x8 @
[ 7.333890]@4 zll----calling---level=6 __initcall_qbam_driver_init6+0x0/0x8 @
[ 7.340523]@4 zll----calling---level=6 __initcall_pty_init6+0x0/0x8 @
[ 7.347011]@4 zll----calling---level=6 __initcall_sysrq_init6+0x0/0x8 @
[ 7.355228]@4 msm_serial_hs module loaded
[ 7.358202]@4 zll----calling---level=6 __initcall_msm_serial_hs_init6+0x0/0x8 @
[ 7.366117]@4 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 7.371586]@4 AXI: get_pdata(): Error: Client name not found
[ 7.377142]@4 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 7.386767]@4 msm_serial_hsl_probe: Bus scaling is disabled
[ 7.392421]@4 78b0000.serial: ttyHSL0 at MMIO 0x78b0000 (irq = 140) is a MSM
[ 7.399351]@4 CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 7.409165]@4 Call trace:
[ 7.411764]@4 [
[ 7.417325]@4 [
[ 7.422535]@4 [
[ 7.427730]@4 [
[ 7.433558]@4 [
[ 7.439533]@4 [
[ 7.445799]@4 [
[ 7.451688]@4 [
[ 7.457863]@4 [
[ 7.463506]@4 [
[ 7.469221]@4 [
[ 7.474702]@4 [
[ 7.480419]@4 [
[ 7.486160]@4 [
[ 7.492586]@4 [
[ 7.498561]@4 [
[ 7.504305]@4 [
[ 7.510542]@4 [
[ 8.515965]@4 msm_hsl_console_setup: console setup on port #0
[ 8.520672]@4 console [ttyHSL0] enabled, bootconsole disabled
[ 8.520672]@4 console [ttyHSL0] enabled, bootconsole disabled
[ 8.532755]@4 msm_serial_hsl_init: driver initialized
[ 8.537165]@4 zll----calling---level=6 __initcall_msm_serial_hsl_init6+0x0/0x8 @
[ 8.546909]@4 zll----calling---level=6 __initcall_smd_tty_init6+0x0/0x8 @
[ 8.552871]@4 zll----calling---level=6 __initcall_rand_initialize6+0x0/0x8 @
[ 8.572370]@4 zll----calling---level=6 __initcall_diagchar_init6+0x0/0x8 @
[ 8.579859]@4 zll----calling---level=6 __initcall_smd_pkt_init6+0x0/0x8 @
[ 8.586471]@4 zll----calling---level=6 __initcall_kgsl_core_init6+0x0/0x8 @
[ 8.593525]@4 zll----calling---level=6 __initcall_kgsl_busmon_init6+0x0/0x8 @
[ 8.603748]@4 kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
[ 8.610688]@4 zll----calling---level=6 __initcall_kgsl_3d_init6+0x0/0x8 @
[ 8.617213]@4 zll----calling---level=6 __initcall_kgsl_iommu_pdev_init6+0x0/0x8 @
[ 8.624452]@4 zll----calling---level=6 __initcall_topology_sysfs_init6+0x0/0x8 @
[ 8.640567]@4 brd: module loaded
[ 8.642790]@4 zll----calling---level=6 __initcall_brd_init6+0x0/0x8 @
[ 8.653671]@4 loop: module loaded
[ 8.655945]@4 zll----calling---level=6 __initcall_loop_init6+0x0/0x8 @
[ 8.663270]@4 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
[ 8.669177]@4 QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[ 8.674973]@4 QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 8.685121]@4 QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x1[ 8.691978]@4 QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[ 8.700116]@4 zll----calling---level=6 __initcall_qseecom_init6+0x0/0x8 @
[ 8.706325]@4 zll----calling---level=6 __initcall_aac_in_init6+0x0/0x8 @
[ 8.713209]@4 zll----calling---level=6 __initcall_qcelp_in_init6+0x0/0x8 @
[ 8.720192]@4 zll----calling---level=6 __initcall_evrc_in_init6+0x0/0x8 @
[ 8.727142]@4 zll----calling---level=6 __initcall_amrnb_in_init6+0x0/0x8 @
[ 8.734248]@4 zll----calling---level=6 __initcall_audio_wma_init6+0x0/0x8 @
[ 8.741306]@4 zll----calling---level=6 __initcall_audio_wmapro_init6+0x0/0x8 @
[ 8.748671]@4 zll----calling---level=6 __initcall_audio_aac_init6+0x0/0x8 @
[ 8.755834]@4 zll----calling---level=6 __initcall_audio_aac_init6+0x0/0x8 @
[ 8.762943]@4 zll----calling---level=6 __initcall_audio_alac_init6+0x0/0x8 @
[ 8.770104]@4 zll----calling---level=6 __initcall_audio_ape_init6+0x0/0x8 @
[ 8.777253]@4 zll----calling---level=6 __initcall_audio_mp3_init6+0x0/0x8 @
[ 8.784370]@4 zll----calling---level=6 __initcall_audio_amrnb_init6+0x0/0x8 @
[ 8.791651]@4 zll----calling---level=6 __initcall_audio_amrwb_init6+0x0/0x8 @
[ 8.798962]@4 zll----calling---level=6 __initcall_audio_amrwbplus_init6+0x0/0x8 @
[ 8.806588]@4 zll----calling---level=6 __initcall_audio_evrc_init6+0x0/0x8 @
[ 8.813779]@4 zll----calling---level=6 __initcall_audio_qcelp_init6+0x0/0x8 @
[ 8.821057]@4 zll----calling---level=6 __initcall_amrwb_in_init6+0x0/0x8 @
[ 8.828117]@4 zll----calling---level=6 __initcall_audio_effects_init6+0x0/0x8 @
[ 8.835543]@4 zll----calling---level=6 __initcall_piusb_driver_init6+0x0/0x8 @
[ 8.842900]@4 zll----calling---level=6 __initcall_tiusb_driver_init6+0x0/0x8 @
[ 8.850327]@4 i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 8.857169]@4 i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 8.864204]@4 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 8.871132]@4 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 8.878288]@4 zll----calling---level=6 __initcall_wcd9xxx_init6+0x0/0x8 @
[ 8.885120]@4 pn5xx_dev_init
[ 8.888037]@4 pn5xx_probe
[ 8.890705]@4 pn5xx_get_pdata: could not get nxp,pn5xx-pvdd, rc=-19
[ 8.896846]@4 pn5xx_get_pdata: could not get nxp,pn5xx-vbat, rc=-19
[ 8.903093]@4 pn5xx_get_pdata: could not get nxp,pn5xx-pmuvcc, rc=-19
[ 8.909505]@4 pn5xx_get_pdata: could not get nxp,pn5xx-sevdd, rc=-19
[ 8.915850]@4 pn5xx_probe: request irq_gpio 900
[ 8.920367]@4 pn5xx_probe: request ven_gpio 899
[ 8.924884]@4 pn5xx_probe: request firm_gpio 895
[ 8.929471]@4 pn5xx_probe: request ese_pwr_gpio 913
[ 8.934347]@4 pn5xx_probe: request clkreq_gpio 875
[ 8.939296]@4 pn5xx_probe : requesting IRQ 421
[ 8.943811]@4 zll----calling---level=6 __initcall_pn5xx_dev_init6+0x0/0x8 @
[ 8.951058]@4 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 8.959244]@4 ICE IRQ = 344
[ 8.962487]@4 zll----calling---level=6 __initcall_qcom_ice_driver_init6+0x0/0x8 @
[ 8.970150]@4 zll----calling---level=6 __initcall_scsi_tgt_init6+0x0/0x8 @
[ 8.976969]@4 zll----calling---level=6 __initcall_init_sd6+0x0/0x8 @
[ 8.983248]@4 zll----calling---level=6 __initcall_init_sg6+0x0/0x8 @
[ 8.989621]@4 SCSI Media Changer driver v0.25
[ 8.994135]@4 zll----calling---level=6 __initcall_init_ch_module6+0x0/0x8 @
[ 9.001223]@4 spidev:spidev_init,731
[ 9.004807]@4 zll----calling---level=6 __initcall_spidev_init6+0x0/0x8 @
[ 9.015071]@4 sps: BAM device 0x0000000007ac4000 is not registered yet.
[ 9.021346]@4 sps:BAM 0x0000000007ac4000 is registered.
[ 9.028483]@4 sps:BAM 0x0000000007ac4000 (va:0xffffff80018e0000) enabled: ver:0x19, number of pipes:12
[ 9.037280]@4 spidev:spidev_probe,627
[ 9.041635]@4 zll----calling---level=6 __initcall_msm_spi_init6+0x0/0x8 @
[ 9.048580]@4 zll----calling---level=6 __initcall_dummy_init_module6+0x0/0x8 @
[ 9.055085]@4 zll----calling---level=6 __initcall_net_olddevs_init6+0x0/0x8 @
[ 9.062270]@4 tun: Universal TUN/TAP device driver, 1.6
[ 9.067432]@4 tun: (C) 1999-2004 Max Krasnyansky
[ 9.073898]@4 zll----calling---level=6 __initcall_tun_init6+0x0/0x8 @
[ 9.083270]@4 zll----calling---level=6 __initcall_rmnet_init6+0x0/0x8 @
[ 9.089013]@4 PPP generic driver version 2.4.2
[ 9.093714]@4 zll----calling---level=6 __initcall_ppp_init6+0x0/0x8 @
[ 9.100039]@4 zll----calling---level=6 __initcall_ppp_async_init6+0x0/0x8 @
[ 9.107176]@4 PPP BSD Compression module registered
[ 9.112054]@4 zll----calling---level=6 __initcall_bsdcomp_init6+0x0/0x8 @
[ 9.118965]@4 PPP Deflate Compression module registered
[ 9.124190]@4 zll----calling---level=6 __initcall_deflate_init6+0x0/0x8 @
[ 9.131128]@4 PPP MPPE Compression module registered
[ 9.136076]@4 zll----calling---level=6 __initcall_ppp_mppe_init6+0x0/0x8 @
[ 9.143122]@4 zll----calling---level=6 __initcall_ppp_sync_init6+0x0/0x8 @
[ 9.150124]@4 NET: Registered protocol family 24
[ 9.154740]@4 zll----calling---level=6 __initcall_pppox_init6+0x0/0x8 @
[ 9.161531]@4 zll----calling---level=6 __initcall_pppoe_init6+0x0/0x8 @
[ 9.168282]@4 zll----calling---level=6 __initcall_pppolac_init6+0x0/0x8 @
[ 9.175240]@4 zll----calling---level=6 __initcall_pppopns_init6+0x0/0x8 @
[ 9.182877]@4 wcnss_wlan probed in built-in mode
[ 9.187678]@4 zll----calling---level=6 __initcall_wcnss_wlan_init6+0x0/0x8 @
[ 9.194987]@4 zll----calling---level=6 __initcall_wcnss_pre_alloc_init6+0x0/0x8 @
[ 9.201676]@4 zll----calling---level=6 __initcall_uio_init6+0x0/0x8 @
[ 9.209152]@4 msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 9.220419]@5 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 9.227551]@5 zll----calling---level=6 __initcall_msm_sharedmem_init6+0x0/0x8 @
[ 9.234741]@5 [fusb302]set con_stat ====> Disabled, InitializeFUSB300Variables, 241
[ 9.242465]@5 i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
[ 9.250484]@5 [fusb302]device id:81
[ 9.255418]@5 fusb302 PD --------> set ProtocolState to =======>PRLDisabled, by USBPDDisable, 532
[ 9.263258]@5 fusb302 PD --------> set PolicyState to =======>peDisabled, by USBPDDisable, 533
[ 9.271837]@5 fusb302 PD --------> set PDTxStatus to =======>txIdle, by USBPDDisable, 534
[ 9.280009]@5 [fusb302]set con_stat ====> DelayUnattached, SetStateDelayUnattached, 1109
[ 9.288082]@5 [fusb302]SetStateDelayUnattached, wake up the SM
[ 9.294060]@1 [fusb302]***********enter fusb302 state thread!!1 ********************
[ 9.294340]@1 [fusb302]reg[0x0a] = 0xff
[ 9.294351]@1 [fusb302]pd_det gpio num is 122
[ 9.294371]@1 [fusb302]pd line is hi
[ 9.294372]@1 [fusb302]int name = 2-0022
[ 9.294850]@1 [fusb302]reg[0x0a] = 0x00
[ 9.294851]@1 [fusb302]probe successfully!
[ 9.294902]@1 i2c-core: driver [fusb302] using legacy suspend method
[ 9.294904]@1 i2c-core: driver [fusb302] using legacy resume method
[ 9.294918]@1 zll----calling---level=6 __initcall_fusb302_i2c_init6+0x0/0x8 @
[ 9.295285]@1 msm_otg 78db000.usb: msm_otg probe
[ 9.298087]@1 [fusb302]state_hrtimer has expired...
[ 9.298831]@1 msm_otg 78db000.usb: OTG regs = ffffff8001752000
[ 9.301267]@1 zll----calling---level=6 __initcall_msm_otg_driver_init6+0x0/0x8 @
[ 9.301793]@1 zll----calling---level=6 __initcall_msm_hsphy_driver_init6+0x0/0x8 @
[ 9.302237]@1 zll----calling---level=6 __initcall_msm_ssphy_driver_init6+0x0/0x8 @
[ 9.302643]@1 zll----calling---level=6 __initcall_msm_ssphy_qmp_driver_init6+0x0/0x8 @
[ 9.303019]@1 zll----calling---level=6 __initcall_qusb_phy_driver_init6+0x0/0x8 @
[ 9.303373]@1 zll----calling---level=6 __initcall_dwc3_driver_init6+0x0/0x8 @
[ 9.303706]@1 zll----calling---level=6 __initcall_dwc3_omap_driver_init6+0x0/0x8 @
[ 9.304063]@1 zll----calling---level=6 __initcall_dwc3_exynos_driver_init6+0x0/0x8 @
[ 9.304415]@1 zll----calling---level=6 __initcall_msm_dbm_driver_init6+0x0/0x8 @
[ 9.304748]@1 zll----calling---level=6 __initcall_msm_dbm_driver_init6+0x0/0x8 @
[ 9.305091]@1 zll----calling---level=6 __initcall_dwc3_msm_init6+0x0/0x8 @
[ 9.305156]@1 zll----calling---level=6 __initcall_dwc3_pci_driver_init6+0x0/0x8 @
[ 9.305463]@1 zll----calling---level=6 __initcall_mon_init6+0x0/0x8 @
[ 9.305466]@1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.305469]@1 zll----calling---level=6 __initcall_ehci_hcd_init6+0x0/0x8 @
[ 9.305471]@1 ehci-pci: EHCI PCI platform driver
[ 9.305528]@1 zll----calling---level=6 __initcall_ehci_pci_init6+0x0/0x8 @
[ 9.305530]@1 ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 9.305961]@1 Unable to get vbus_otg
[ 9.305965]@1 msm_hsusb_host msm_hsusb_host: unable to register with transceiver
[ 9.305997]@1 platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
[ 9.306039]@1 zll----calling---level=6 __initcall_ehci_msm_init6+0x0/0x8 @
[ 9.306041]@1 ehci-msm2: Qualcomm EHCI Host Controller
[ 9.306583]@1 zll----calling---level=6 __initcall_ehci_msm2_init6+0x0/0x8 @
[ 9.306863]@1 zll----calling---level=6 __initcall_xhci_hcd_init6+0x0/0x8 @
[ 9.306911]@1 zll----calling---level=6 __initcall_ice40_spi_driver_init6+0x0/0x8 @
[ 9.307306]@1 zll----calling---level=6 __initcall_ehci_msm_uicc_driver_init6+0x0/0x8 @
[ 9.307414]@1 usbcore: registered new interface driver cdc_acm
[ 9.307415]@1 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.307419]@1 zll----calling---level=6 __initcall_acm_init6+0x0/0x8 @
[ 9.307521]@1 usbcore: registered new interface driver ccid_bridge
[ 9.307737]@1 ccid_bridge_init: success
[ 9.307741]@1 zll----calling---level=6 __initcall_ccid_bridge_init6+0x0/0x8 @
[ 9.307832]@1 usbcore: registered new interface driver usb-storage
[ 9.307836]@1 zll----calling---level=6 __initcall_usb_storage_driver_init6+0x0/0x8 @
[ 9.307884]@1 usbcore: registered new interface driver ums-alauda
[ 9.307887]@1 zll----calling---level=6 __initcall_alauda_driver_init6+0x0/0x8 @
[ 9.307931]@1 usbcore: registered new interface driver ums-cypress
[ 9.307935]@1 zll----calling---level=6 __initcall_cypress_driver_init6+0x0/0x8 @
[ 9.307976]@1 usbcore: registered new interface driver ums-datafab
[ 9.307980]@1 zll----calling---level=6 __initcall_datafab_driver_init6+0x0/0x8 @
[ 9.308019]@1 usbcore: registered new interface driver ums-freecom
[ 9.308023]@1 zll----calling---level=6 __initcall_freecom_driver_init6+0x0/0x8 @
[ 9.308061]@1 usbcore: registered new interface driver ums-isd200
[ 9.308064]@1 zll----calling---level=6 __initcall_isd200_driver_init6+0x0/0x8 @
[ 9.308103]@1 usbcore: registered new interface driver ums-jumpshot
[ 9.308106]@1 zll----calling---level=6 __initcall_jumpshot_driver_init6+0x0/0x8 @
[ 9.308164]@1 usbcore: registered new interface driver ums-karma
[ 9.308168]@1 zll----calling---level=6 __initcall_karma_driver_init6+0x0/0x8 @
[ 9.308212]@1 usbcore: registered new interface driver ums-sddr09
[ 9.308215]@1 zll----calling---level=6 __initcall_sddr09_driver_init6+0x0/0x8 @
[ 9.308278]@1 usbcore: registered new interface driver ums-sddr55
[ 9.308282]@1 zll----calling---level=6 __initcall_sddr55_driver_init6+0x0/0x8 @
[ 9.308330]@1 usbcore: registered new interface driver ums-usbat
[ 9.308334]@1 zll----calling---level=6 __initcall_usbat_driver_init6+0x0/0x8 @
[ 9.308504]@1 usbcore: registered new interface driver usbserial
[ 9.308508]@1 zll----calling---level=6 __initcall_usb_serial_init6+0x0/0x8 @
[ 9.308571]@1 usbcore: registered new interface driver qc_csvt
[ 9.308613]@1 usbserial: USB Serial support registered for qc_csvt
[ 9.308617]@1 zll----calling---level=6 __initcall_csvt_init6+0x0/0x8 @
[ 9.308684]@1 usbcore: registered new interface driver usb_ehset_test
[ 9.308688]@1 zll----calling---level=6 __initcall_ehset_init6+0x0/0x8 @
[ 9.308801]@1 zll----calling---level=6 __initcall_gadget_cfs_init6+0x0/0x8 @
[ 9.790681]@0 [fusb302]con_stat ====> DelayUnattached
[ 9.791288]@0 zll----calling---level=6 __initcall_ci13xxx_msm_init6+0x0/0x8 @
[ 9.791293]@0 zll----calling---level=6 __initcall_acmmod_init6+0x0/0x8 @
[ 9.791743]@0 zll----calling---level=6 __initcall_userial_init6+0x0/0x8 @
[ 9.791748]@0 zll----calling---level=6 __initcall_gsermod_init6+0x0/0x8 @
[ 9.791998]@0 zll----calling---level=6 __initcall_gether_init6+0x0/0x8 @
[ 9.792030]@0 zll----calling---level=6 __initcall_ghsuart_data_init6+0x0/0x8 @
[ 9.792059]@0 zll----calling---level=6 __initcall_ghsuart_ctrl_init6+0x0/0x8 @
[ 9.792100]@0 zll----calling---level=6 __initcall_ghsic_data_init6+0x0/0x8 @
[ 9.792127]@0 zll----calling---level=6 __initcall_gctrl_init6+0x0/0x8 @
[ 9.792703]@0 zll----calling---level=6 __initcall_gqti_ctrl_init6+0x0/0x8 @
[ 9.792728]@0 zll----calling---level=6 __initcall_gsmd_ctrl_init6+0x0/0x8 @
[ 9.792732]@0 zll----calling---level=6 __initcall_serport_init6+0x0/0x8 @
[ 9.793077]@0 mousedev: PS/2 mouse device common for all mice
[ 9.793081]@0 zll----calling---level=6 __initcall_mousedev_init6+0x0/0x8 @
[ 9.793085]@0 zll----calling---level=6 __initcall_evdev_init6+0x0/0x8 @
[ 9.793191]@0 zll----calling---level=6 __initcall_atkbd_init6+0x0/0x8 @
[ 9.793400]@0 input: input_mt_wrapper as /devices/virtual/input/input0
[ 9.793675]@0 zll----calling---level=6 __initcall_input_mt_wrapper_init6+0x0/0x8 @
[ 9.794424]@0 zll----calling---level=6 __initcall_hbtp_init6+0x0/0x8 @
[ 9.794726]@0 input: hbtp_vm as /devices/virtual/input/input1
[ 9.795005]@0 zll----calling---level=6 __initcall_hbtp_vm_init6+0x0/0x8 @
[ 9.795110]@0 zll----calling---level=6 __initcall_uinput_init6+0x0/0x8 @
[ 9.795624]@0 qcom,qpnp-rtc qpnp-rtc-ffffffc0dea99600: rtc core: registered qpnp_rtc as rtc0
[ 9.795985]@0 zll----calling---level=6 __initcall_qpnp_rtc_init6+0x0/0x8 @
[ 9.795987]@0 i2c /dev entries driver
[ 9.796601]@0 zll----calling---level=6 __initcall_i2c_dev_init6+0x0/0x8 @
[ 9.800565]@0 platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
[ 9.800913]@0 zll----calling---level=6 __initcall_msm_vidc_init6+0x0/0x8 @
[ 9.801859]@0 zll----calling---level=6 __initcall_msm_init6+0x0/0x8 @
[ 9.802782]@0 CAM-SMMU cam_populate_smmu_context_banks:1054 getting QSMMU ctx : vfe
[ 9.803138]@0 CAM-SMMU cam_populate_smmu_context_banks:1054 getting QSMMU ctx : vfe_secure
[ 9.803467]@0 CAM-SMMU cam_populate_smmu_context_banks:1054 getting QSMMU ctx : cpp
[ 9.803765]@0 CAM-SMMU cam_populate_smmu_context_banks:1054 getting QSMMU ctx : jpeg_enc0
[ 9.804111]@0 zll----calling---level=6 __initcall_cam_smmu_init_module6+0x0/0x8 @
[ 9.804860]@0 msm_cci_get_clk_info: clock-names[0][0] = camss_top_ahb_clk
[ 9.804862]@0 msm_cci_get_clk_info: clk_rate[0][0] = -1
[ 9.804865]@0 msm_cci_get_clk_info: clock-names[0][1] = cci_src_clk
[ 9.804867]@0 msm_cci_get_clk_info: clk_rate[0][1] = 19200000
[ 9.804869]@0 msm_cci_get_clk_info: clock-names[0][2] = cci_ahb_clk
[ 9.804870]@0 msm_cci_get_clk_info: clk_rate[0][2] = -1
[ 9.804873]@0 msm_cci_get_clk_info: clock-names[0][3] = camss_cci_clk
[ 9.804874]@0 msm_cci_get_clk_info: clk_rate[0][3] = -1
[ 9.804876]@0 msm_cci_get_clk_info: clock-names[0][4] = camss_ahb_clk
[ 9.804878]@0 msm_cci_get_clk_info: clk_rate[0][4] = -1
[ 9.804880]@0 msm_cci_get_clk_info: clock-names[0][5] = ispif_ahb_clk
[ 9.804881]@0 msm_cci_get_clk_info: clk_rate[0][5] = 61540000
[ 9.804883]@0 msm_cci_get_clk_info: clock-names[1][0] = camss_top_ahb_clk
[ 9.804885]@0 msm_cci_get_clk_info: clk_rate[1][0] = -1
[ 9.804887]@0 msm_cci_get_clk_info: clock-names[1][1] = cci_src_clk
[ 9.804889]@0 msm_cci_get_clk_info: clk_rate[1][1] = 37500000
[ 9.804891]@0 msm_cci_get_clk_info: clock-names[1][2] = cci_ahb_clk
[ 9.804892]@0 msm_cci_get_clk_info: clk_rate[1][2] = -1
[ 9.804894]@0 msm_cci_get_clk_info: clock-names[1][3] = camss_cci_clk
[ 9.804896]@0 msm_cci_get_clk_info: clk_rate[1][3] = -1
[ 9.804898]@0 msm_cci_get_clk_info: clock-names[1][4] = camss_ahb_clk
[ 9.804900]@0 msm_cci_get_clk_info: clk_rate[1][4] = -1
[ 9.804902]@0 msm_cci_get_clk_info: clock-names[1][5] = ispif_ahb_clk
[ 9.804904]@0 msm_cci_get_clk_info: clk_rate[1][5] = 61540000
[ 9.806318]@0 zll----calling---level=6 __initcall_msm_cci_init_module6+0x0/0x8 @
[ 9.807489]@0 zll----calling---level=6 __initcall_msm_csiphy_init_module6+0x0/0x8 @
[ 9.808754]@0 zll----calling---level=6 __initcall_msm_csid_init_module6+0x0/0x8 @
[ 9.809306]@0 zll----calling---level=6 __initcall_msm_actuator_init_module6+0x0/0x8 @
[ 9.809723]@0 zll----calling---level=6 __initcall_msm_led_trigger_add_driver6+0x0/0x8 @
[ 9.810157]@0 adp1660 i2c_add_driver success
[ 9.810157]@0 zll----calling---level=6 __initcall_msm_flash_adp1660_init_module6+0x0/0x8 @
[ 9.810550]@0 zll----calling---level=6 __initcall_msm_flash_bd7710_init_module6+0x0/0x8 @
[ 9.811202]@0 msm_torch_brightness_set:88 No torch trigger1 found, can't set brightness
[ 9.811684]@0 zll----calling---level=6 __initcall_msm_flash_init_module6+0x0/0x8 @
[ 9.811686]@0 msm_flash_lm3642_init entry
[ 9.811750]@0 zll----calling---level=6 __initcall_msm_flash_lm3642_init6+0x0/0x8 @
[ 9.812467]@0 zll----calling---level=6 __initcall_msm_eeprom_init_module6+0x0/0x8 @
[ 9.812886]@0 zll----calling---level=6 __initcall_msm_ois_init_module6+0x0/0x8 @
[ 9.813062]@0 zll----calling---level=6 __initcall_msm_sensor_init_module6+0x0/0x8 @
[ 9.813798]@0 msm_sensor_get_sub_module_index:215 src_node NULL
[ 9.813801]@0 msm_sensor_get_sub_module_index:231 src_node NULL
[ 9.813804]@0 msm_sensor_get_sub_module_index:247 eeprom src_node NULL
[ 9.813808]@0 msm_sensor_get_sub_module_index:275 src_node NULL
[ 9.813815]@0 msm_sensor_get_sub_module_index csiphy_core[0] = 0
[ 9.813823]@0 msm_sensor_get_sub_module_index csid_core[0] = 0
[ 9.813828]@0 msm_camera_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 9.813833]@0 msm_camera_get_dt_vreg_data reg_name[0] = cam_vdig
[ 9.813835]@0 msm_camera_get_dt_vreg_data reg_name[1] = cam_vio
[ 9.813837]@0 msm_camera_get_dt_vreg_data reg_name[2] = cam_vana
[ 9.813847]@0 msm_camera_get_dt_vreg_data cam_vreg[0].min_voltage = 1050000
[ 9.813849]@0 msm_camera_get_dt_vreg_data cam_vreg[1].min_voltage = 1800000
[ 9.813851]@0 msm_camera_get_dt_vreg_data cam_vreg[2].min_voltage = 1800000
[ 9.813853]@0 msm_camera_get_dt_vreg_data cam_vreg[0].max_voltage = 1050000
[ 9.813854]@0 msm_camera_get_dt_vreg_data cam_vreg[1].max_voltage = 1800000
[ 9.813855]@0 msm_camera_get_dt_vreg_data cam_vreg[2].max_voltage = 1800000
[ 9.813858]@0 msm_camera_get_dt_vreg_data cam_vreg[0].op_mode = 200000
[ 9.813859]@0 msm_camera_get_dt_vreg_data cam_vreg[1].op_mode = 100000
[ 9.813860]@0 msm_camera_get_dt_vreg_data cam_vreg[2].op_mode = 100000
[ 9.813907]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 905
[ 9.813909]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 1008
[ 9.813910]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 942
[ 9.813912]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].gpio = 911
[ 9.813913]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].gpio = 912
[ 9.813915]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[5].gpio = 897
[ 9.813918]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 9.813919]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 9.813921]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 9.813922]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].flags = 0
[ 9.813923]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].flags = 0
[ 9.813925]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[5].flags = 0
[ 9.813928]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK0
[ 9.813931]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET0
[ 9.813933]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_VANA0
[ 9.813936]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].label = CAM_VIO0
[ 9.813938]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].label = CAM_DVDD0
[ 9.813941]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[5].label = CAM_MIPI12M
[ 9.813949]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vana 942
[ 9.813952]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vio 911
[ 9.813956]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vdig 912
[ 9.813959]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-reset 1008
[ 9.813961]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-standby 897
[ 9.814362]@0 g_sctrl[0] ffffffc0dbd73480
[ 9.814362]@0 msm_sensor_get_sub_module_index:215 src_node NULL
[ 9.814365]@0 msm_sensor_get_sub_module_index:231 src_node NULL
[ 9.814368]@0 msm_sensor_get_sub_module_index:247 eeprom src_node NULL
[ 9.814371]@0 msm_sensor_get_sub_module_index:275 src_node NULL
[ 9.814377]@0 msm_sensor_get_sub_module_index csiphy_core[0] = 0
[ 9.814384]@0 msm_sensor_get_sub_module_index csid_core[0] = 0
[ 9.814388]@0 msm_camera_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 9.814393]@0 msm_camera_get_dt_vreg_data reg_name[0] = cam_vio
[ 9.814395]@0 msm_camera_get_dt_vreg_data reg_name[1] = cam_vana
[ 9.814397]@0 msm_camera_get_dt_vreg_data reg_name[2] = cam_vdig
[ 9.814405]@0 msm_camera_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 9.814406]@0 msm_camera_get_dt_vreg_data cam_vreg[1].min_voltage = 2800000
[ 9.814408]@0 msm_camera_get_dt_vreg_data cam_vreg[2].min_voltage = 1200000
[ 9.814410]@0 msm_camera_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 9.814411]@0 msm_camera_get_dt_vreg_data cam_vreg[1].max_voltage = 2800000
[ 9.814413]@0 msm_camera_get_dt_vreg_data cam_vreg[2].max_voltage = 1200000
[ 9.814415]@0 msm_camera_get_dt_vreg_data cam_vreg[0].op_mode = 105000
[ 9.814417]@0 msm_camera_get_dt_vreg_data cam_vreg[1].op_mode = 80000
[ 9.814418]@0 msm_camera_get_dt_vreg_data cam_vreg[2].op_mode = 100000
[ 9.814452]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 906
[ 9.814453]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 1009
[ 9.814455]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 911
[ 9.814456]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].gpio = 942
[ 9.814457]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].gpio = 897
[ 9.814460]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 9.814462]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 9.814463]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 9.814464]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].flags = 0
[ 9.814466]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].flags = 0
[ 9.814468]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK8M
[ 9.814471]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET8M
[ 9.814473]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_VIO8M
[ 9.814476]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].label = CAM_AVDD8M
[ 9.814478]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].label = CAM_MIPI8M
[ 9.814485]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vana 942
[ 9.814488]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vio 911
[ 9.814492]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-reset 1009
[ 9.814494]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-standby 897
[ 9.814914]@0 g_sctrl[1] ffffffc0dbd72300
[ 9.814914]@0 msm_sensor_get_sub_module_index:215 src_node NULL
[ 9.814917]@0 msm_sensor_get_sub_module_index:231 src_node NULL
[ 9.814919]@0 msm_sensor_get_sub_module_index:247 eeprom src_node NULL
[ 9.814923]@0 msm_sensor_get_sub_module_index:275 src_node NULL
[ 9.814930]@0 msm_sensor_get_sub_module_index csiphy_core[0] = 1
[ 9.814937]@0 msm_sensor_get_sub_module_index csid_core[0] = 1
[ 9.814942]@0 msm_camera_get_dt_vreg_data qcom,cam-vreg-name count 3
[ 9.814946]@0 msm_camera_get_dt_vreg_data reg_name[0] = cam_vio
[ 9.814948]@0 msm_camera_get_dt_vreg_data reg_name[1] = cam_vana
[ 9.814950]@0 msm_camera_get_dt_vreg_data reg_name[2] = cam_vdig
[ 9.814960]@0 msm_camera_get_dt_vreg_data cam_vreg[0].min_voltage = 1800000
[ 9.814961]@0 msm_camera_get_dt_vreg_data cam_vreg[1].min_voltage = 2800000
[ 9.814962]@0 msm_camera_get_dt_vreg_data cam_vreg[2].min_voltage = 1200000
[ 9.814965]@0 msm_camera_get_dt_vreg_data cam_vreg[0].max_voltage = 1800000
[ 9.814966]@0 msm_camera_get_dt_vreg_data cam_vreg[1].max_voltage = 2800000
[ 9.814968]@0 msm_camera_get_dt_vreg_data cam_vreg[2].max_voltage = 1200000
[ 9.814970]@0 msm_camera_get_dt_vreg_data cam_vreg[0].op_mode = 105000
[ 9.814971]@0 msm_camera_get_dt_vreg_data cam_vreg[1].op_mode = 80000
[ 9.814973]@0 msm_camera_get_dt_vreg_data cam_vreg[2].op_mode = 100000
[ 9.815007]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].gpio = 907
[ 9.815009]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].gpio = 1010
[ 9.815010]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].gpio = 984
[ 9.815011]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].gpio = 948
[ 9.815012]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].gpio = 986
[ 9.815015]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].flags = 1
[ 9.815017]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].flags = 0
[ 9.815018]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].flags = 0
[ 9.815019]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].flags = 0
[ 9.815021]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].flags = 0
[ 9.815023]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[0].label = CAMIF_MCLK5M
[ 9.815026]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[1].label = CAM_RESET5M
[ 9.815028]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[2].label = CAM_VIO5M
[ 9.815031]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[3].label = CAM_AVDD5M
[ 9.815034]@0 msm_camera_get_dt_gpio_req_tbl cam_gpio_req_tbl[4].label = CAM_DVDD5M
[ 9.815041]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vana 948
[ 9.815044]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vio 984
[ 9.815048]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-vdig 986
[ 9.815050]@0 msm_camera_init_gpio_pin_tbl qcom,gpio-reset 1010
[ 9.815222]@0 g_sctrl[2] ffffffc0db900000
[ 9.815223]@0 zll----calling---level=6 __initcall_msm_sensor_driver_init6+0x0/0x8 @
[ 9.815668]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[0] = -1
[ 9.815670]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[1] = 240000000
[ 9.815672]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[2] = -1
[ 9.815673]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[3] = -1
[ 9.815675]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[4] = 240000000
[ 9.815676]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[5] = -1
[ 9.815677]@0 MSM-CPP msm_cpp_get_clk_info:3717 clk_rate[6] = -1
[ 9.815680]@0 MSM-CPP cpp_probe:3824 Bus master 1
[ 9.818644]@0 ------------[ cut here ]------------
[ 9.818654]@0 WARNING: at /company/zhengliliang/code/L_6.0_8976/LA.BR.1.3.4-01810-8976.0/kernel/drivers/clk/qcom/clock-local2.c:216 rcg_clk_enable+0x50/0xa0()
[ 9.818656]@0 Attempting to prepare camss_top_ahb_clk_src before setting its rate. Set the rate first!
[ 9.818659]@0 Modules linked in:
[ 9.818664]@0 CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 9.818666]@0 Call trace:
[ 9.818675]@0 [
[ 9.818678]@0 [
[ 9.818683]@0 [
[ 9.818687]@0 [
[ 9.818690]@0 [
[ 9.818693]@0 [
[ 9.818697]@0 [
[ 9.818699]@0 [
[ 9.818708]@0 [
[ 9.818712]@0 [
[ 9.818715]@0 [
[ 9.818721]@0 [
[ 9.818725]@0 [
[ 9.818728]@0 [
[ 9.818731]@0 [
[ 9.818734]@0 [
[ 9.818737]@0 [
[ 9.818740]@0 [
[ 9.818743]@0 [
[ 9.818748]@0 [
[ 9.818751]@0 [
[ 9.818755]@0 [
[ 9.818758]@0 [
[ 9.818760]@0 ---[ end trace 174803349a4350cd ]---
[ 9.819160]@0 MSM-CPP cpp_init_hardware:1045 CPP HW Version: 0x40030000
[ 9.819169]@0 MSM-CPP cpp_init_hardware:1066 stream_cnt:0
[ 9.820072]@0 zll----calling---level=6 __initcall_msm_cpp_init_module6+0x0/0x8 @
[ 9.820365]@0 zll----calling---level=6 __initcall_msm_vpe_init_module6+0x0/0x8 @
[ 9.821688]@0 zll----calling---level=6 __initcall_msm_vfe_init_module6+0x0/0x8 @
[ 9.822333]@0 zll----calling---level=6 __initcall_msm_vfe47_init_module6+0x0/0x8 @
[ 9.822751]@0 zll----calling---level=6 __initcall_msm_vfe46_init_module6+0x0/0x8 @
[ 9.823124]@0 zll----calling---level=6 __initcall_msm_vfe44_init_module6+0x0/0x8 @
[ 9.824477]@0 zll----calling---level=6 __initcall_msm_vfe40_init_module6+0x0/0x8 @
[ 9.825087]@0 zll----calling---level=6 __initcall_msm_vfe32_init_module6+0x0/0x8 @
[ 9.825803]@0 zll----calling---level=6 __initcall_msm_ispif_init_module6+0x0/0x8 @
[ 9.826518]@0 __msm_jpeg_init:1517] Jpeg Device id 0
[ 9.826519]@0 zll----calling---level=6 __initcall_msm_jpeg_driver_init6+0x0/0x8 @
[ 9.826719]@0 zll----calling---level=6 __initcall_msm_buf_mngr_init6+0x0/0x8 @
[ 9.826853]@0 usbcore: registered new interface driver uvcvideo
[ 9.826854]@0 USB Video Class driver (1.1.1)
[ 9.826859]@0 zll----calling---level=6 __initcall_uvc_init6+0x0/0x8 @
[ 9.827596]@0 zll----calling---level=6 __initcall_iris_radio_init6+0x0/0x8 @
[ 9.827598]@0 YL:PSY:CH2:bq25890_init():
[ 9.827661]@0 YL:PSY:CH2:bq25890_parallel_probe(): ++
[ 9.827663]@0 YL:PSY:CH2:bq25890_parallel_probe(): #######################the is charge test #############
[ 9.827668]@0 YL:PSY:CH2:bq25890_parallel_probe(): i2c addr(0x6a)
[ 9.827670]@0 YL:PSY:CH2:bq25890_prase_dt(): GPIO valid!
[ 9.827768]@0 YL:PSY:CH2:bq25890_prase_dt(): GPIO(873)
[ 9.827770]@0 YL:PSY:CH2:bq25890_prase_dt(): VBAT(4400mV)
[ 9.827808]@0 YL:PSY:CH2:bq25890_registers_init(): START
[ 10.331948]@0 i2c-msm-v2 78b6000.i2c: TIMEOUT_ERROR(val:510msec) misconfigured GPIO or slave pulling bus line(s) low
[ 10.331948]@0 : msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x6a MSTR_STS:0x0c110000 OPER:0x000005c0
[ 10.331967]@0 i2c write fail: can't write 00 to 00: -110
[ 10.331969]@0 YL:PSY:CH2:bq25890_registers_init(): write register(0x00) fail
[ 10.841940]@0 i2c-msm-v2 78b6000.i2c: TIMEOUT_ERROR(val:510msec) misconfigured GPIO or slave pulling bus line(s) low
[ 10.841940]@0 : msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x6a MSTR_STS:0x0c110000 OPER:0x00000f60
[ 10.841954]@0 i2c read fail: can't read from 00: -110
[ 10.841956]@0 YL:PSY:CH2:bq25890_dump_registers(): REG(0x00) read fail!
[ 11.351940]@0 i2c-msm-v2 78b6000.i2c: TIMEOUT_ERROR(val:510msec) misconfigured GPIO or slave pulling bus line(s) low
[ 11.351940]@0 : msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x6a MSTR_STS:0x0c110000 OPER:0x00000f60
[ 11.351954]@0 i2c read fail: can't read from 01: -110
[ 11.351956]@0 YL:PSY:CH2:bq25890_dump_registers(): REG(0x01) read fail!
[ 11.584457]@1 YL:PSY:CH2:bq25890_dump_registers(): REG(0x02) = 0x40
[ 11.590769]@1 YL:PSY:CH2:bq25890_dump_registers(): REG(0x03) = 0x1a
[ 11.591919]@1 [sched_delayed] sched: RT throttling activated for rt_rq ffffffc0e4c0f0d0 (cpu 0)
[ 11.591919]@1 potential CPU hogs:
[ 11.591919]@1 fusb302_state_k (255)
[ 11.612773]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x04) = 0x 0
[ 11.618800]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x05) = 0x 0
[ 11.625070]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x06) = 0x8e
[ 11.631299]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x07) = 0x8c
[ 11.637613]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x08) = 0xff
[ 11.643816]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x09) = 0x 0
[ 11.650049]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0a) = 0x73
[ 11.656315]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0b) = 0xa6
[ 11.662565]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0c) = 0x 0
[ 11.668797]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0d) = 0x8d
[ 11.675064]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0e) = 0x55
[ 11.681297]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x0f) = 0x59
[ 11.687563]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x10) = 0x3f
[ 11.693813]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x11) = 0x99
[ 11.700048]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x12) = 0x 0
[ 11.706314]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x13) = 0x 0
[ 11.712562]@4 YL:PSY:CH2:bq25890_dump_registers(): REG(0x14) = 0x1f
[ 11.719046]@4 YL:PSY:CH2:bq25890_get_charge_state(): charge state(3)
[ 11.725442]@4 YL:PSY:CH2:bq25890_get_vbus(): VBUS++
[ 11.730092]@4 power_supply usb-parallel: driver failed to report `model_name' property: -22
[ 11.738440]@4 zll----calling---level=6 __initcall_bq25890_init6+0x0/0x8 @
[ 11.745228]@4 YL:PSY:CH2:bq25890_get_charge_state(): charge state(3)
[ 11.745323]@4 zll----calling---level=6 __initcall_qpnp_vm_bms_init6+0x0/0x8 @
[ 11.748399]@4 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
[ 11.748497]@4 zll----calling---level=6 __initcall_fg_init6+0x0/0x8 @
[ 11.748776]@4 zll----calling---level=6 __initcall_qpnp_lbc_init6+0x0/0x8 @
[ 11.749131]@4 spmi qpnp-smbcharger-ffffffc0dea9cd00: Driver qpnp-smbcharger requests probe deferral
[ 11.749220]@4 zll----calling---level=6 __initcall_smbchg_init6+0x0/0x8 @
[ 11.750477]@4 FG: fg_set_resume_soc: setting resume-soc to fc
[ 11.750781]@4 unable to find DT imem DLOAD mode node
[ 11.751009]@4 unable to find DT imem EDLOAD mode node
[ 11.752720]@4 zll----calling---level=6 __initcall_msm_restart_init6+0x0/0x8 @
[ 11.754794]@4 qpnp_vadc_get_temp: VADC read error with -517
[ 11.754800]@4 thermal thermal_zone1: failed to read out thermal zone 1
[ 11.755797]@4 qpnp_vadc_get_temp: VADC read error with -517
[ 11.755803]@4 thermal thermal_zone2: failed to read out thermal zone 2
[ 11.756765]@4 qpnp_vadc_get_temp: VADC read error with -517
[ 11.756770]@4 thermal thermal_zone3: failed to read out thermal zone 3
[ 11.757297]@4 qpnp_vadc_get_temp: VADC read error with -517
[ 11.757301]@4 thermal thermal_zone4: failed to read out thermal zone 4
[ 11.758296]@4 zll----calling---level=6 __initcall_qpnp_vadc_init6+0x0/0x8 @
[ 11.759142]@4 of_batterydata_get_best_profile: No battery data found
[ 11.759144]@4 FG: fg_batt_profile_init: couldn't find profile handle
[ 11.759150]@4 FG: batt_profile_init: failed to initialize profile
[ 11.763561]@4 zll----calling---level=6 __initcall_tsens_thermal_register6+0x0/0x8 @
[ 11.780637]@4 zll----calling---level=6 __initcall_qpnp_tm_init6+0x0/0x8 @
[ 11.783329]@4 zll----calling---level=6 __initcall_qpnp_adc_tm_init6+0x0/0x8 @
[ 11.783389]@4 zll----calling---level=6 __initcall_lmh_mon_init_call6+0x0/0x8 @
[ 11.784245]@4 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 11.784250]@4 zll----calling---level=6 __initcall_dm_init6+0x0/0x8 @
[ 11.784463]@4 zll----calling---level=6 __initcall_dm_bufio_init6+0x0/0x8 @
[ 11.784467]@4 zll----calling---level=6 __initcall_dm_crypt_init6+0x0/0x8 @
[ 11.784471]@4 zll----calling---level=6 __initcall_dm_verity_init6+0x0/0x8 @
[ 11.784474]@4 device-mapper: req-crypt: dm-req-crypt successfully initalized.
[ 11.784474]@4
[ 11.784477]@4 zll----calling---level=6 __initcall_req_dm_crypt_init6+0x0/0x8 @
[ 11.785193]@4 zll----calling---level=6 __initcall_bluetooth_power_init6+0x0/0x8 @
[ 11.785547]@4 zll----calling---level=6 __initcall_cpufreq_stats_init6+0x0/0x8 @
[ 11.785553]@4 zll----calling---level=6 __initcall_cpufreq_gov_powersave_init6+0x0/0x8 @
[ 11.785557]@4 zll----calling---level=6 __initcall_cpufreq_gov_userspace_init6+0x0/0x8 @
[ 11.785561]@4 zll----calling---level=6 __initcall_cpufreq_gov_dbs_init6+0x0/0x8 @
[ 11.785761]@4 zll----calling---level=6 __initcall_cpufreq_interactive_init6+0x0/0x8 @
[ 11.785952]@4 zll----calling---level=6 __initcall_cpufreq_persistent_stats_init6+0x0/0x8 @
[ 11.785955]@4 cpuidle: using governor ladder
[ 11.785959]@4 zll----calling---level=6 __initcall_init_ladder6+0x0/0x8 @
[ 11.785961]@4 cpuidle: using governor menu
[ 11.785965]@4 zll----calling---level=6 __initcall_init_menu6+0x0/0x8 @
[ 11.786013]@4 zll----calling---level=6 __initcall_mmc_blk_init6+0x0/0x8 @
[ 11.786015]@4 sdhci: Secure Digital Host Controller Interface driver
[ 11.786016]@4 sdhci: Copyright(c) Pierre Ossman
[ 11.786020]@4 zll----calling---level=6 __initcall_sdhci_drv_init6+0x0/0x8 @
[ 11.786021]@4 sdhci-pltfm: SDHCI platform and OF driver helper
[ 11.786025]@4 zll----calling---level=6 __initcall_sdhci_pltfm_drv_init6+0x0/0x8 @
[ 11.786878]@4 qcom_ice_get_pdevice: found ice device ffffffc0dc10e200
[ 11.786880]@4 qcom_ice_get_pdevice: matching platform device ffffffc0dea01600
[ 11.786890]@4 wangjun8_sd_detct_MMC_CAP2_CD_ACTIVE_HIGH--- gpio
[ 11.791122]@4 sdhci_msm 7824900.sdhci: host_use_default_qos = 1
[ 11.791126]@4 sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 1
[ 11.791129]@4 sdhci_msm 7824900.sdhci: dma_latency = 60
[ 11.791131]@4 sdhci_msm 7824900.sdhci: dma_latency = 340
[ 11.791134]@4 sdhci_msm 7824900.sdhci: dma_latency = 900
[ 11.791138]@4 sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
[ 11.791140]@4 sdhci_msm 7824900.sdhci: dma_latency = 200
[ 11.791143]@4 sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
[ 11.791146]@4 sdhci_msm 7824900.sdhci: dma_latency = 200
[ 11.791148]@4 sdhci_msm 7824900.sdhci: Host using default pm_qos
[ 11.791736]@4 qcom_ice 7803000.sdcc1ice: QC ICE 2.0.41 device found @0xffffff8001760000
[ 12.141939]@4 [fusb302]StateMachineDelayUnattached, 432
[ 12.142447]@4 [fusb302]INT_handler, wake up the SM
[ 12.142560]@4 fusb302 PD --------> set ProtocolState to =======>PRLDisabled, by USBPDDisable, 532
[ 12.142563]@4 fusb302 PD --------> set PolicyState to =======>peDisabled, by USBPDDisable, 533
[ 12.142567]@4 fusb302 PD --------> set PDTxStatus to =======>txIdle, by USBPDDisable, 534
[ 12.142570]@4 [fusb302]set con_stat ====> Unattached, SetStateUnattached, 1151
[ 12.142571]@4 [fusb302]SetStateUnattached, wake up the SM
[ 12.142916]@4 [fusb302]con_stat ====> Unattached
[ 12.142920]@4 [fusb302]StateMachineUnattached, 501,waiting for toggle done status!!
[ 12.143209]@4 [fusb302]VBUSOK,fusb_eint_work, 1901
[ 12.143212]@4 [fusb302]>1.23V=======fusb_eint_work, 1909
[ 12.143549]@4 [fusb302]Toggle logic running (processor has previously writen TOGGLE=1)
[ 12.149726]@4 [fusb302]INT_handler, wake up the SM
[ 12.150058]@4 [fusb302]con_stat ====> Unattached
[ 12.150060]@4 [fusb302]Port partner CC2 is Rp
[ 12.151083]@4 [fusb302]set con_stat ====> AttachWaitSink, SetStateAttachWaitSnk, 1192
[ 12.151085]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.151088]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.151095]@4 [fusb302]AttachWaitSnk, wake up the SM
[ 12.151410]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.151412]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.151414]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.151417]@4 [fusb302]CC1TermDeb = CCTypeNone, CC2TermDeb = CCTypeNone
[ 12.151420]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 65535
[ 12.151593]@4 [fusb302]VBUSOK,fusb_eint_work, 1901
[ 12.151596]@4 [fusb302][200-660]mVfusb_eint_work, 1911
[ 12.151934]@4 [fusb302]Toggle logic running (processor has previously writen TOGGLE=1)
[ 12.154098]@4 [fusb302]toggle_hrtimer has expired...
[ 12.154425]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.154427]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.154429]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.154431]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.154433]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.155001]@4 [fusb302]CC1TermDeb = CCTypeNone, CC2TermDeb = CCTypeNone
[ 12.155003]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 65535
[ 12.158002]@4 [fusb302]toggle_hrtimer has expired...
[ 12.158328]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.158330]@4 [fusb302]Termination is Ra, vRa
[ 12.158332]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.158335]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.158336]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.158900]@4 [fusb302]CC1TermDeb = CCTypeNone, CC2TermDeb = CCTypeNone
[ 12.158903]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 65535
[ 12.161902]@4 [fusb302]toggle_hrtimer has expired...
[ 12.162229]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.162230]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.162232]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.162234]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.162236]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.162800]@4 [fusb302]CC1TermDeb = CCTypeNone, CC2TermDeb = CCTypeNone
[ 12.162803]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 65535
[ 12.165802]@4 [fusb302]toggle_hrtimer has expired...
[ 12.166129]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.166130]@4 [fusb302]Termination is Ra, vRa
[ 12.166132]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.166133]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.166135]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.166700]@4 [fusb302]CC1TermDeb = CCTypeNone, CC2TermDeb = CCTypeNone
[ 12.166703]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 65535
[ 12.168339]@4 [fusb302]debounce_hrtimer1 timer has expired...
[ 12.168663]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.168665]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.168666]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.168667]@4 [fusb302]CC state is known
[ 12.168671]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.168673]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.169701]@4 [fusb302]toggle_hrtimer has expired...
[ 12.170026]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.170028]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.170030]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.170031]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.170033]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.170599]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.170602]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.173603]@4 [fusb302]toggle_hrtimer has expired...
[ 12.173929]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.173931]@4 [fusb302]Termination is Ra, vRa
[ 12.173932]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.173934]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.173936]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.174501]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.174503]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.177503]@4 [fusb302]toggle_hrtimer has expired...
[ 12.177828]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.177830]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.177832]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.177833]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.177835]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.178401]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.178404]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.181403]@4 [fusb302]toggle_hrtimer has expired...
[ 12.181728]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.181729]@4 [fusb302]Termination is Ra, vRa
[ 12.181731]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.181733]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.181734]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.182304]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.182306]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.185306]@4 [fusb302]toggle_hrtimer has expired...
[ 12.185633]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.185635]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.185636]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.185638]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.185639]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.186208]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.186211]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.189209]@4 [fusb302]toggle_hrtimer has expired...
[ 12.189536]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.189538]@4 [fusb302]Termination is Ra, vRa
[ 12.189539]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.189540]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.189542]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.190106]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.190109]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.193111]@4 [fusb302]toggle_hrtimer has expired...
[ 12.193438]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.193440]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.193441]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.193443]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.193444]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.194012]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.194014]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.197013]@4 [fusb302]toggle_hrtimer has expired...
[ 12.197339]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.197341]@4 [fusb302]Termination is Ra, vRa
[ 12.197343]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.197344]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.197346]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.197910]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.197913]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.200912]@4 [fusb302]toggle_hrtimer has expired...
[ 12.201238]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.201240]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.201242]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.201244]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.201245]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.201811]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.201813]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.204815]@4 [fusb302]toggle_hrtimer has expired...
[ 12.205143]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.205145]@4 [fusb302]Termination is Ra, vRa
[ 12.205147]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.205148]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.205150]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.205716]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.205719]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.208718]@4 [fusb302]toggle_hrtimer has expired...
[ 12.209043]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.209045]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.209047]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.209049]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.209050]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.209617]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.209620]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.212620]@4 [fusb302]toggle_hrtimer has expired...
[ 12.212948]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.212949]@4 [fusb302]Termination is Ra, vRa
[ 12.212951]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.212952]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.212954]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.213520]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.213522]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.216522]@4 [fusb302]toggle_hrtimer has expired...
[ 12.216847]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.216849]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.216851]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.216853]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.216854]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.217418]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.217420]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.220419]@4 [fusb302]toggle_hrtimer has expired...
[ 12.220744]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.220746]@4 [fusb302]Termination is Ra, vRa
[ 12.220747]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.220749]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.220750]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.221315]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.221317]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.224318]@4 [fusb302]toggle_hrtimer has expired...
[ 12.224646]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.224648]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.224649]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.224651]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.224652]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.225218]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.225221]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.228220]@4 [fusb302]toggle_hrtimer has expired...
[ 12.228545]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.228547]@4 [fusb302]Termination is Ra, vRa
[ 12.228549]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.228550]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.228552]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.229115]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.229117]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.232118]@4 [fusb302]toggle_hrtimer has expired...
[ 12.232445]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.232447]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.232448]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.232450]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.232451]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.233019]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.233021]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.236021]@4 [fusb302]toggle_hrtimer has expired...
[ 12.236347]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.236348]@4 [fusb302]Termination is Ra, vRa
[ 12.236350]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.236352]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.236353]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.236917]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.236919]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.239919]@4 [fusb302]toggle_hrtimer has expired...
[ 12.240245]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.240246]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.240248]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.240249]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.240251]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.240817]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.240820]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.243821]@4 [fusb302]toggle_hrtimer has expired...
[ 12.244148]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.244149]@4 [fusb302]Termination is Ra, vRa
[ 12.244151]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.244153]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.244154]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.244721]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.244724]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.247724]@4 [fusb302]toggle_hrtimer has expired...
[ 12.248047]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.248049]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.248051]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.248052]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.248054]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.248620]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.248623]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.251622]@4 [fusb302]toggle_hrtimer has expired...
[ 12.251951]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.251953]@4 [fusb302]Termination is Ra, vRa
[ 12.251955]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.251956]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.251958]@4 [fusb302]currently on the CC1 pin,Toggle over to look at CC2
[ 12.252522]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.252525]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.255524]@4 [fusb302]toggle_hrtimer has expired...
[ 12.255850]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.255852]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.255853]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC2
[ 12.255855]@4 [fusb302]toggle timer has expired, it's time to swap detection
[ 12.255856]@4 [fusb302]currently on the CC2 pin,Toggle over to look at CC1
[ 12.256421]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.256423]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 90
[ 12.258673]@4 [fusb302]debounce_hrtimer2 timer has expired...
[ 12.258997]@4 [fusb302]con_stat ====> AttachWaitSink
[ 12.258999]@4 [fusb302]Termination is Ra, vRa
[ 12.259001]@4 [fusb302]Use the measure block to monitor or measure the voltage on CC1
[ 12.259003]@4 [fusb302]CC1TermDeb = CCTypeRa, CC2TermDeb = CCTypeRdUSB
[ 12.259005]@4 [fusb302]VBUSOK = 0x1, DebounceTimer2 = 0
[ 12.259007]@4 [fusb302]VBUS and Rp detected for > tCCDebounce
[ 12.259255]@4 fusb302 PD --------> set ProtocolState to =======>PRLIdle, by ResetProtocolLayer, 3039
[ 12.259259]@4 fusb302 PD --------> set PDTxStatus to =======>txIdle, by ResetProtocolLayer, 3040
[ 12.259261]@4 fusb302 PD --------> ProtocolMsgRx is set to FALSE, 3046
[ 12.259264]@4 fusb302 PD --------> PolicyIsSink
[ 12.259267]@4 fusb302 PD --------> set PolicyState to =======>peSinkStartup, by USBPDEnable, 499
[ 12.259423]@4 [fusb302]toggle_hrtimer has expired...
[ 12.260436]@4 [fusb302]set con_stat ====> AttachedSink, SetStateAttachedSink, 1353
[ 12.260439]@4 [fusb302]SetStateAttachedSink, wake up the SM
[ 12.260748]@4 fusb302 PD --------> ProtocolState is ==> PRLIdle
[ 12.260752]@4 fusb302 PD --------> [ProtocolIdle]: PDTxStatus = txIdle, Do Nothing!!!
[ 12.260754]@4 fusb302 PD --------> USBPDPolicyEngine: PolicyState is peSinkStartup
[ 12.261121]@4 fusb302 PD --------> set ProtocolState to =======>PRLIdle, by ResetProtocolLayer, 3039
[ 12.261124]@4 fusb302 PD --------> set PDTxStatus to =======>txIdle, by ResetProtocolLayer, 3040
[ 12.261126]@4 fusb302 PD --------> ProtocolMsgRx is set to FALSE, 3046
[ 12.261129]@4 fusb302 PD --------> set PolicyState to =======>peSinkDiscovery, by PolicySinkStartup, 1629
[ 12.261131]@4 [fusb302]con_stat ====> AttachedSink
[ 12.261133]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.261441]@4 fusb302 PD --------> ProtocolState is ==> PRLIdle
[ 12.261444]@4 fusb302 PD --------> [ProtocolIdle]: PDTxStatus = txIdle, Do Nothing!!!
[ 12.261446]@4 fusb302 PD --------> USBPDPolicyEngine: PolicyState is peSinkDiscovery
[ 12.261449]@4 fusb302 PD --------> PolicySinkDiscovery, 1637, vbusok
[ 12.261452]@4 fusb302 PD --------> set PolicyState to =======>peSinkWaitCaps, by PolicySinkDiscovery, 1639
[ 12.261453]@4 [fusb302]con_stat ====> AttachedSink
[ 12.261455]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.261766]@4 fusb302 PD --------> ProtocolState is ==> PRLIdle
[ 12.261768]@4 fusb302 PD --------> [ProtocolIdle]: PDTxStatus = txIdle, Do Nothing!!!
[ 12.261770]@4 fusb302 PD --------> USBPDPolicyEngine: PolicyState is peSinkWaitCaps
[ 12.261774]@4 fusb302 PD --------> PolicySinkWaitCaps, 1700, Do nothing
[ 12.261775]@4 [fusb302]con_stat ====> AttachedSink
[ 12.261776]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.270443]@4 [fusb302]debounce_hrtimer1 timer has expired...
[ 12.270771]@4 fusb302 PD --------> ProtocolState is ==> PRLIdle
[ 12.270774]@4 fusb302 PD --------> [ProtocolIdle]: PDTxStatus = txIdle, Do Nothing!!!
[ 12.270776]@4 fusb302 PD --------> USBPDPolicyEngine: PolicyState is peSinkWaitCaps
[ 12.270778]@4 fusb302 PD --------> PolicySinkWaitCaps, 1700, Do nothing
[ 12.270779]@4 [fusb302]con_stat ====> AttachedSink
[ 12.270781]@4 [fusb302]Termination is Default, vRd-Connect and vRd-USB
[ 12.270783]@4 [fusb302]sink current is default!!
[ 12.382017]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1017600. Temp:60
[ 12.382021]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1017600. Temp:60
[ 12.382024]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1017600. Temp:60
[ 12.382028]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1017600. Temp:60
[ 12.382031]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU4 max frequency to 1248000. Temp:60
[ 12.382034]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU5 max frequency to 1248000. Temp:60
[ 12.382037]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU6 max frequency to 1248000. Temp:60
[ 12.382040]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU7 max frequency to 1248000. Temp:60
[ 14.084536]@4 YL:PSY:CH2:bq25890_get_vbus(): VBUS++
[ 14.087910]@4 FG: fg_heart_beat: SOC( 50%),Ibat( 686mA),Vbat(3929mV),OCV(4108mV),TMP(32.2C),R(227mR),ID(256mR),STS(0),FULL(0),TIME( 01-01 08:00:13.942137548)
[ 14.103210]@4 power_supply usb-parallel: driver failed to report `model_name' property: -22
[ 14.111480]@5 mmc0: no vqmmc regulator found
[ 14.115612]@5 mmc0: no vmmc regulator found
[ 14.119986]@5 mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[ 14.158667]@5 sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 14.165142]@5 wangjun8_sd_detct_MMC_CAP2_CD_ACTIVE_HIGH--- gpio
[ 14.175934]@5 sdhci_msm 7864900.sdhci: host_use_default_qos = 1
[ 14.180811]@5 sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
[ 14.189597]@5 sdhci_msm 7864900.sdhci: dma_latency = 701
[ 14.194971]@5 sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
[ 14.195568]@5 wangjun8_mmc_decode_cid() - card->cid.manfid = 0x17, (Not Samsung)
[ 14.195568]@5
[ 14.207056]@5 mmc0: BKOPS_EN bit = 0
[ 14.207060]@5 mmc0: eMMC FW version: 0x04
[ 14.207063]@5 mmc0: CMDQ supported: depth: 32
[ 14.217705]@5 mmc0: new HS400 enhanced strobe MMC card at address 0001
[ 14.218609]@5 mmc0: -524: cmdq: unable to set-up
[ 14.219132]@5 mmcblk0: mmc0:0001 064G30 58.2 GiB
[ 14.219562]@5 mmcblk0rpmb: mmc0:0001 064G30 partition 3 4.00 MiB
[ 14.219834]@5 call yl_params_init!
[ 14.223651]@5 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
[ 14.269309]@5 sdhci_msm 7864900.sdhci: dma_latency = 200
[ 14.274662]@5 sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
[ 14.284208]@5 sdhci_msm 7864900.sdhci: dma_latency = 200
[ 14.289578]@5 sdhci_msm 7864900.sdhci: Host using default pm_qos
[ 14.307855]@4 mmc1: no vqmmc regulator found
[ 14.311085]@4 mmc1: no vmmc regulator found
[ 14.315476]@4 mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
[ 14.332059]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 691200. Temp:62
[ 14.339546]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 691200. Temp:62
[ 14.348079]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 691200. Temp:62
[ 14.354357]@2 zll----calling---level=6 __initcall_sdhci_msm_driver_init6+0x0/0x8 @
[ 14.354509]@2 qcom,leds-qpnp: probe of leds-qpnp-ffffffc0deb00b00 failed with error -10
[ 14.354563]@2 qcom,leds-qpnp: probe of leds-qpnp-ffffffc0deb06e00 failed with error -10
[ 14.354621]@2 zll----calling---level=6 __initcall_qpnp_led_init6+0x0/0x8 @
[ 14.356977]@2 zll----calling---level=6 __initcall_qpnp_wled_init6+0x0/0x8 @
[ 14.357657]@2 zll----calling---level=6 __initcall_gpio_led_driver_init6+0x0/0x8 @
[ 14.357665]@2 zll----calling---level=6 __initcall_bl_trig_init6+0x0/0x8 @
[ 14.357671]@2 zll----calling---level=6 __initcall_defon_trig_init6+0x0/0x8 @
[ 14.357675]@2 zll----calling---level=6 __initcall_switch_class_init6+0x0/0x8 @
[ 14.423638]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 691200. Temp:62
[ 14.432105]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU4 max frequency to 1113600. Temp:62
[ 14.440673]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU5 max frequency to 1113600. Temp:62
[ 14.449289]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU6 max frequency to 1113600. Temp:62
[ 14.457888]@2 msm_thermal:do_cluster_freq_ctrl Limiting CPU7 max frequency to 1113600. Temp:62
[ 14.474327]@4 zll----calling---level=6 __initcall_tz_log_init6+0x0/0x8 @
[ 14.480310]@4 zll----calling---level=6 __initcall_hid_init6+0x0/0x8 @
[ 14.486950]@4 zll----calling---level=6 __initcall_uhid_init6+0x0/0x8 @
[ 14.493569]@4 zll----calling---level=6 __initcall_hid_generic_init6+0x0/0x8 @
[ 14.500818]@4 zll----calling---level=6 __initcall_apple_driver_init6+0x0/0x8 @
[ 14.508188]@4 zll----calling---level=6 __initcall_elecom_driver_init6+0x0/0x8 @
[ 14.515747]@4 zll----calling---level=6 __initcall_magicmouse_driver_init6+0x0/0x8 @
[ 14.523495]@4 zll----calling---level=6 __initcall_ms_driver_init6+0x0/0x8 @
[ 14.530570]@4 zll----calling---level=6 __initcall_mt_driver_init6+0x0/0x8 @
[ 14.537754]@4 usbcore: registered new interface driver usbhid
[ 14.543369]@4 usbhid: USB HID core driver
[ 14.547349]@4 zll----calling---level=6 __initcall_hid_init6+0x0/0x8 @
[ 14.553961]@4 zll----calling---level=6 __initcall_staging_init6+0x0/0x8 @
[ 14.561642]@4 zram: Created 1 device(s) ...
[ 14.565079]@4 zll----calling---level=6 __initcall_zram_init6+0x0/0x8 @
[ 14.571779]@4 zll----calling---level=6 __initcall_zs_init6+0x0/0x8 @
[ 14.578268]@4 zll----calling---level=6 __initcall_ion_page_pool_init6+0x0/0x8 @
[ 14.586308]@4 ashmem: initialized
[ 14.589015]@4 zll----calling---level=6 __initcall_ashmem_init6+0x0/0x8 @
[ 14.595940]@4 zll----calling---level=6 __initcall_timed_output_init6+0x0/0x8 @
[ 14.603268]@4 zll----calling---level=6 __initcall_lowmem_init6+0x0/0x8 @
[ 14.610590]@4 platform 78c4000.qcom,usbbam: Driver usb_bam requests probe deferral
[ 14.618125]@4 zll----calling---level=6 __initcall_init6+0x0/0x8 @
[ 14.624093]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea98580: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 14.635919]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea98580: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 14.649664]@4 input: qpnp_pon as /devices/virtual/input/input2
[ 14.656723]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea9d800: No PON config. specified
[ 14.663913]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea9d800: PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 14.675862]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea9d800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 14.689954]@4 qcom,qpnp-power-on qpnp-power-on-ffffffc0dea9d800: PMIC@SID2: configuring PON for reset
[ 14.699158]@4 zll----calling---level=6 __initcall_qpnp_pon_init6+0x0/0x8 @
[ 14.705622]@4 zll----calling---level=6 __initcall_qpnp_vibrator_init6+0x0/0x8 @
[ 14.712072]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 400000. Temp:60
[ 14.712078]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 400000. Temp:60
[ 14.712084]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 400000. Temp:60
[ 14.712089]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 400000. Temp:60
[ 14.712096]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU4 max frequency to 998400. Temp:60
[ 14.712101]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU5 max frequency to 998400. Temp:60
[ 14.712107]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU6 max frequency to 998400. Temp:60
[ 14.712112]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU7 max frequency to 998400. Temp:60
[ 14.781076]@4 company vibrator init!
[ 14.785115]@4 zll----calling---level=6 __initcall_yl_vib_init6+0x0/0x8 @
[ 14.791529]@4 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[ 14.800171]@4 zll----calling---level=6 __initcall_qpnp_coincell_init6+0x0/0x8 @
[ 14.812635]@4 zll----calling---level=6 __initcall_seemp_logk_init6+0x0/0x8 @
[ 14.820044]@4 zll----calling---level=6 __initcall_avtimer_init6+0x0/0x8 @
[ 14.827416]@4 zll----calling---level=6 __initcall_qpnp_haptic_init6+0x0/0x8 @
[ 14.833713]@4 zll----calling---level=6 __initcall_cpu_clock_a7_init_opp6+0x0/0x8 @
[ 14.841713]@4 zll----calling---level=6 __initcall_cpu_clock_init_vote6+0x0/0x8 @
[ 14.851003]@4 zll----calling---level=6 __initcall_msm_subsystem_iommu_init6+0x0/0x8 @
[ 14.858476]@4 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[ 14.865592]@4 zll----calling---level=6 __initcall_bimc_bwmon_init6+0x0/0x8 @
[ 14.872821]@4 msmcci-hwmon b1dc000.qcom,msmcci-ccimon: Cache HWmon governor registered.
[ 14.880274]@4 msmcci-hwmon b1dc000.qcom,msmcci-ccimon: MSMCCI cache hwmon registered
[ 14.888452]@4 zll----calling---level=6 __initcall_msmcci_hwmon_init6+0x0/0x8 @
[ 14.896860]@4 zll----calling---level=6 __initcall_governor_spdm_bw_hyp6+0x0/0x8 @
[ 14.904764]@4 devfreq qcom,cpubw.49: Couldn't update frequency transition information.
[ 14.912148]@4 devfreq qcom,mincpubw.50: Couldn't update frequency transition information.
[ 14.920245]@4 zll----calling---level=6 __initcall_devbw_init6+0x0/0x8 @
[ 14.927492]@4 devfreq qcom,cci.48: Couldn't update frequency transition information.
[ 14.934768]@4 zll----calling---level=6 __initcall_devfreq_clock_init6+0x0/0x8 @
[ 14.944052]@4 zll----calling---level=6 __initcall_devfreq_spdm_init6+0x0/0x8 @
[ 14.951247]@4 zll----calling---level=6 __initcall_binder_init6+0x0/0x8 @
[ 14.958306]@4 zll----calling---level=6 __initcall_sensors_ssc_init6+0x0/0x8 @
[ 14.964602]@4 HALL:YLLOG: module init, poweroff = 2, recovery =0
[ 14.970978]@4 HALL:YLLOG: Registering hall driver
[ 14.975277]@4 HALL:YLLOG:===1===
[ 14.978477]@4 ------------[ cut here ]------------
[ 14.983262]@4 WARNING: at /company/zhengliliang/code/L_6.0_8976/LA.BR.1.3.4-01810-8976.0/kernel/include/linux/of.h:640 hall_probe+0x4a0/0x4c8()
[ 14.996031]@4 Modules linked in:
[ 14.999211]@4 CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.10.84-gc02f4f9-03166-g8c8a4c4-dirty #50
[ 15.009033]@4 Call trace:
[ 15.011634]@4 [
[ 15.017195]@4 [
[ 15.022404]@4 [
[ 15.027597]@4 [
[ 15.032137]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU4 max frequency to 883200. Temp:60
[ 15.032147]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU5 max frequency to 883200. Temp:60
[ 15.032157]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU6 max frequency to 883200. Temp:60
[ 15.032166]@4 msm_thermal:do_cluster_freq_ctrl Limiting CPU7 max frequency to 883200. Temp:60
[ 15.067781]@4 [
[ 15.073634]@4 [
[ 15.078988]@4 [
[ 15.084906]@4 [
[ 15.091049]@4 [
[ 15.096709]@4 [
[ 15.102545]@4 [
[ 15.107889]@4 [
[ 15.113650]@4 [
[ 15.119347]@4 [
[ 15.125797]@4 [
[ 15.130893]@4 [
[ 15.136640]@4 [
[ 15.142890]@4 [
[ 15.148164]@4 ---[ end trace 174803349a4350ce ]---
[ 15.152960]@4 HALL:YLLOG:===right hall:gpio = 1019,wakeup = 1===
[ 15.158929]@4 HALL:YLLOG:success get hall devtree pdata!
[ 15.165434]@4 HALL:YLLOG:: Success to register driver
[ 15.169770]@4 zll----calling---level=6 __initcall_hall_init6+0x0/0x8 @
[ 15.176486]@4 get_company_pcb_version: Failed to find qcom, msm8952-mtp
[ 15.182712]@4 yl_debug_init
[ 15.185423]@4 zll----calling---level=6 __initcall_yl_debug_init6+0x0/0x8 @
[ 15.192497]@4 zll----calling---level=6 __initcall_company_module_management_init6+0x0/0x8 @
[ 15.200922]@4 zll----calling---level=6 __initcall_alsa_hwdep_init6+0x0/0x8 @
[ 15.208417]@4 zll----calling---level=6 __initcall_alsa_timer_init6+0x0/0x8 @
[ 15.215379]@4 zll----calling---level=6 __initcall_alsa_pcm_init6+0x0/0x8 @
[ 15.222365]@4 zll----calling---level=6 __initcall_snd_mem_init6+0x0/0x8 @
[ 15.229264]@4 zll----calling---level=6 __initcall_alsa_rawmidi_init6+0x0/0x8 @
[ 15.236655]@4 zll----calling---level=6 __initcall_snd_compress_init6+0x0/0x8 @
[ 15.244223]@4 usbcore: registered new interface driver snd-usb-audio
[ 15.250352]@4 zll----calling---level=6 __initcall_snd_usb_audio_init6+0x0/0x8 @
[ 15.259304]@4 zll----calling---level=6 __initcall_snd_soc_init6+0x0/0x8 @
[ 15.266737]@4 zll----calling---level=6 __initcall_audio_ref_clk_platform_init6+0x0/0x8 @
[ 15.274155]@4 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 15.283087]@4 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 15.292127]@4 zll----calling---level=6 __initcall_msm8x16_wcd_codec_init6+0x0/0x8 @
[ 15.300246]@4 zll----calling---level=6 __initcall_tapan_codec_init6+0x0/0x8 @
[ 15.307464]@4 zll----calling---level=6 __initcall_tomtom_codec_init6+0x0/0x8 @
[ 15.314845]@4 zll----calling---level=6 __initcall_tasha_codec_driver_init6+0x0/0x8 @
[ 15.322533]@4 zll----calling---level=6 __initcall_wsa881x_codec_init6+0x0/0x8 @
[ 15.329927]@4 zll----calling---level=6 __initcall_wsa881x_codec_init6+0x0/0x8 @
[ 15.338303]@4 zll----calling---level=6 __initcall_msm_stub_init6+0x0/0x8 @
[ 15.344911]@4 tfa9890-stub-codec tfa9890-stub-codec.1: dev name tfa9890-stub-codec.1
[ 15.352404]@4 tfa9890_stub_dev_probe: tfa9890 probed successfully!
[ 15.358498]@4 zll----calling---level=6 __initcall_tfa9890_modinit6+0x0/0x8 @
[ 15.366288]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.391916]@4 zll----calling---level=6 __initcall_msm_dai_q6_init6+0x0/0x8 @
[ 15.399206]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.406818]@4 zll----calling---level=6 __initcall_msm_soc_routing_platform_init6+0x0/0x8 @
[ 15.415236]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.422853]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.430204]@4 msm-pcm-lpa qcom,msm-pcm-lpa.78: msm_pcm_probe: dev name qcom,msm-pcm-lpa.78
[ 15.438465]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.446633]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.454007]@4 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 15.461909]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.469823]@4 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 15.477939]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.486139]@4 zll----calling---level=6 __initcall_msm_dai_q6_hdmi_init6+0x0/0x8 @
[ 15.493774]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.501310]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.509188]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.516179]@4 zll----calling---level=6 __initcall_msm_dai_slim_init6+0x0/0x8 @
[ 15.524190]@4 zll----calling---level=6 __initcall_msm_soc_platform_init6+0x0/0x8 @
[ 15.532621]@4 zll----calling---level=6 __initcall_msm_dai_stub_init6+0x0/0x8 @
[ 15.539160]@4 zll----calling---level=6 __initcall_adm_init6+0x0/0x8 @
[ 15.545798]@4 zll----calling---level=6 __initcall_afe_init6+0x0/0x8 @
[ 15.552319]@4 zll----calling---level=6 __initcall_q6asm_init6+0x0/0x8 @
[ 15.559081]@4 zll----calling---level=6 __initcall_voice_init6+0x0/0x8 @
[ 15.565757]@4 zll----calling---level=6 __initcall_core_init6+0x0/0x8 @
[ 15.573695]@4 zll----calling---level=6 __initcall_rtac_init6+0x0/0x8 @
[ 15.579454]@4 zll----calling---level=6 __initcall_q6lsm_init6+0x0/0x8 @
[ 15.586250]@4 zll----calling---level=6 __initcall_audio_slimslave_init6+0x0/0x8 @
[ 15.595530]@4 zll----calling---level=6 __initcall_msm_fe_dai_init6+0x0/0x8 @
[ 15.602640]@4 zll----calling---level=6 __initcall_msm_cpe_lsm_driver_init6+0x0/0x8 @
[ 15.610336]@4 zll----calling---level=6 __initcall_msm8x16_asoc_machine_driver_init6+0x0/0x8 @
[ 15.619114]@4 zll----calling---level=6 __initcall_msm8939_asoc_machine_driver_init6+0x0/0x8 @
[ 15.627053]@4 zll----calling---level=6 __initcall_codec_detector_init6+0x0/0x8 @
[ 15.636258]@4 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 15.642236]@4 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 15.650364]@4 zll----calling---level=6 __initcall_msm8952_asoc_machine_driver_init6+0x0/0x8 @
[ 15.659514]@4 zll----calling---level=6 __initcall_msm8952_asoc_machine_driver_init6+0x0/0x8 @
[ 15.667471]@4 zll----calling---level=6 __initcall_sock_diag_init6+0x0/0x8 @
[ 15.674996]@4 zll----calling---level=6 __initcall_flow_cache_init_global6+0x0/0x8 @
[ 15.682351]@4 zll----calling---level=6 __initcall_sockev_client_init6+0x0/0x8 @
[ 15.689752]@4 zll----calling---level=6 __initcall_llc_init6+0x0/0x8 @
[ 15.696379]@4 zll----calling---level=6 __initcall_snap_init6+0x0/0x8 @
[ 15.703053]@4 zll----calling---level=6 __initcall_blackhole_module_init6+0x0/0x8 @
[ 15.710758]@4 zll----calling---level=6 __initcall_htb_module_init6+0x0/0x8 @
[ 15.717992]@4 zll----calling---level=6 __initcall_prio_module_init6+0x0/0x8 @
[ 15.725270]@4 u32 classifier
[ 15.728114]@4 Actions configured
[ 15.731678]@4 zll----calling---level=6 __initcall_init_u326+0x0/0x8 @
[ 15.738292]@4 zll----calling---level=6 __initcall_init_fw6+0x0/0x8 @
[ 15.744804]@4 zll----calling---level=6 __initcall_cls_flow_init6+0x0/0x8 @
[ 15.751816]@4 zll----calling---level=6 __initcall_init_em_cmp6+0x0/0x8 @
[ 15.758691]@4 zll----calling---level=6 __initcall_init_em_nbyte6+0x0/0x8 @
[ 15.765730]@4 zll----calling---level=6 __initcall_init_em_u326+0x0/0x8 @
[ 15.772581]@4 zll----calling---level=6 __initcall_init_em_meta6+0x0/0x8 @
[ 15.779507]@4 zll----calling---level=6 __initcall_init_em_text6+0x0/0x8 @
[ 15.786467]@4 Netfilter messages via NETLINK v0.30.
[ 15.791354]@4 zll----calling---level=6 __initcall_nfnetlink_init6+0x0/0x8 @
[ 15.798505]@4 zll----calling---level=6 __initcall_nfnetlink_queue_init6+0x0/0x8 @
[ 15.806137]@4 zll----calling---level=6 __initcall_nfnetlink_log_init6+0x0/0x8 @
[ 15.813563]@4 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.820682]@4 zll----calling---level=6 __initcall_nf_conntrack_standalone_init6+0x0/0x8 @
[ 15.828247]@4 zll----calling---level=6 __initcall_nf_conntrack_proto_dccp_init6+0x0/0x8 @
[ 15.836491]@4 zll----calling---level=6 __initcall_nf_ct_proto_gre_init6+0x0/0x8 @
[ 15.844177]@4 zll----calling---level=6 __initcall_nf_conntrack_proto_sctp_init6+0x0/0x8 @
[ 15.852470]@4 zll----calling---level=6 __initcall_nf_conntrack_proto_udplite_init6+0x0/0x8 @
[ 15.861014]@4 ctnetlink v0.93: registering with nfnetlink.
[ 15.866521]@4 zll----calling---level=6 __initcall_ctnetlink_init6+0x0/0x8 @
[ 15.873654]@4 zll----calling---level=6 __initcall_nf_conntrack_amanda_init6+0x0/0x8 @
[ 15.881649]@4 zll----calling---level=6 __initcall_nf_conntrack_ftp_init6+0x0/0x8 @
[ 15.889401]@4 zll----calling---level=6 __initcall_nf_conntrack_h323_init6+0x0/0x8 @
[ 15.897209]@4 zll----calling---level=6 __initcall_nf_conntrack_irc_init6+0x0/0x8 @
[ 15.904875]@4 zll----calling---level=6 __initcall_nf_conntrack_netbios_ns_init6+0x0/0x8 @
[ 15.913217]@4 zll----calling---level=6 __initcall_nf_conntrack_pptp_init6+0x0/0x8 @
[ 15.921064]@4 zll----calling---level=6 __initcall_nf_conntrack_sane_init6+0x0/0x8 @
[ 15.928856]@4 zll----calling---level=6 __initcall_nf_conntrack_sip_init6+0x0/0x8 @
[ 15.936562]@4 zll----calling---level=6 __initcall_nf_conntrack_tftp_init6+0x0/0x8 @
[ 15.944513]@4 zll----calling---level=6 __initcall_nf_nat_init6+0x0/0x8 @
[ 15.951227]@4 zll----calling---level=6 __initcall_nf_nat_proto_dccp_init6+0x0/0x8 @
[ 15.959043]@4 zll----calling---level=6 __initcall_nf_nat_proto_udplite_init6+0x0/0x8 @
[ 15.967122]@4 zll----calling---level=6 __initcall_nf_nat_proto_sctp_init6+0x0/0x8 @
[ 15.974926]@4 zll----calling---level=6 __initcall_nf_nat_amanda_init6+0x0/0x8 @
[ 15.982388]@4 zll----calling---level=6 __initcall_nf_nat_ftp_init6+0x0/0x8 @
[ 15.989576]@4 zll----calling---level=6 __initcall_nf_nat_irc_init6+0x0/0x8 @
[ 15.996801]@4 zll----calling---level=6 __initcall_nf_nat_sip_init6+0x0/0x8 @
[ 16.004002]@4 zll----calling---level=6 __initcall_nf_nat_tftp_init6+0x0/0x8 @
[ 16.011276]@4 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 16.018419]@4 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 16.024403]@4 zll----calling---level=6 __initcall_nf_tproxy_init6+0x0/0x8 @
[ 16.031519]@4 zll----calling---level=6 __initcall_xt_init6+0x0/0x8 @
[ 16.038040]@4 zll----calling---level=6 __initcall_tcpudp_mt_init6+0x0/0x8 @
[ 16.045152]@4 zll----calling---level=6 __initcall_mark_mt_init6+0x0/0x8 @
[ 16.052137]@4 zll----calling---level=6 __initcall_connmark_mt_init6+0x0/0x8 @
[ 16.059372]@4 zll----calling---level=6 __initcall_xt_nat_init6+0x0/0x8 @
[ 16.066259]@4 zll----calling---level=6 __initcall_classify_tg_init6+0x0/0x8 @
[ 16.073537]@4 zll----calling---level=6 __initcall_connsecmark_tg_init6+0x0/0x8 @
[ 16.081073]@4 zll----calling---level=6 __initcall_xt_ct_tg_init6+0x0/0x8 @
[ 16.088126]@4 zll----calling---level=6 __initcall_log_tg_init6+0x0/0x8 @
[ 16.094978]@4 zll----calling---level=6 __initcall_netmap_tg_init6+0x0/0x8 @
[ 16.102095]@4 zll----calling---level=6 __initcall_nflog_tg_init6+0x0/0x8 @
[ 16.109110]@4 zll----calling---level=6 __initcall_nfqueue_tg_init6+0x0/0x8 @
[ 16.116340]@4 zll----calling---level=6 __initcall_redirect_tg_init6+0x0/0x8 @
[ 16.123626]@4 zll----calling---level=6 __initcall_secmark_tg_init6+0x0/0x8 @
[ 16.130812]@4 zll----calling---level=6 __initcall_tproxy_tg_init6+0x0/0x8 @
[ 16.137948]@4 zll----calling---level=6 __initcall_tee_tg_init6+0x0/0x8 @
[ 16.144803]@4 zll----calling---level=6 __initcall_trace_tg_init6+0x0/0x8 @
[ 16.152106]@4 zll----calling---level=6 __initcall_idletimer_tg_init6+0x0/0x8 @
[ 16.159425]@4 zll----calling---level=6 __initcall_hardidletimer_tg_init6+0x0/0x8 @
[ 16.166954]@4 zll----calling---level=6 __initcall_comment_mt_init6+0x0/0x8 @
[ 16.174146]@4 zll----calling---level=6 __initcall_connlimit_mt_init6+0x0/0x8 @
[ 16.181507]@4 zll----calling---level=6 __initcall_conntrack_mt_init6+0x0/0x8 @
[ 16.188904]@4 zll----calling---level=6 __initcall_dscp_mt_init6+0x0/0x8 @
[ 16.195846]@4 zll----calling---level=6 __initcall_ecn_mt_init6+0x0/0x8 @
[ 16.202704]@4 zll----calling---level=6 __initcall_esp_mt_init6+0x0/0x8 @
[ 16.209901]@4 zll----calling---level=6 __initcall_hashlimit_mt_init6+0x0/0x8 @
[ 16.216953]@4 zll----calling---level=6 __initcall_helper_mt_init6+0x0/0x8 @
[ 16.224061]@4 zll----calling---level=6 __initcall_hl_mt_init6+0x0/0x8 @
[ 16.230810]@4 zll----calling---level=6 __initcall_iprange_mt_init6+0x0/0x8 @
[ 16.238035]@4 zll----calling---level=6 __initcall_length_mt_init6+0x0/0x8 @
[ 16.245151]@4 zll----calling---level=6 __initcall_limit_mt_init6+0x0/0x8 @
[ 16.252183]@4 zll----calling---level=6 __initcall_mac_mt_init6+0x0/0x8 @
[ 16.259022]@4 zll----calling---level=6 __initcall_multiport_mt_init6+0x0/0x8 @
[ 16.266427]@4 zll----calling---level=6 __initcall_pkttype_mt_init6+0x0/0x8 @
[ 16.273627]@4 zll----calling---level=6 __initcall_policy_mt_init6+0x0/0x8 @
[ 16.281029]@4 zll----calling---level=6 __initcall_qtaguid_mt_init6+0x0/0x8 @
[ 16.287950]@4 zll----calling---level=6 __initcall_quota_mt_init6+0x0/0x8 @
[ 16.295053]@4 zll----calling---level=6 __initcall_quota_mt2_init6+0x0/0x8 @
[ 16.302102]@4 zll----calling---level=6 __initcall_socket_mt_init6+0x0/0x8 @
[ 16.309194]@4 zll----calling---level=6 __initcall_state_mt_init6+0x0/0x8 @
[ 16.316256]@4 zll----calling---level=6 __initcall_statistic_mt_init6+0x0/0x8 @
[ 16.323623]@4 zll----calling---level=6 __initcall_string_mt_init6+0x0/0x8 @
[ 16.330720]@4 xt_time: kernel timezone is -0000
[ 16.335297]@5 zll----calling---level=6 __initcall_time_mt_init6+0x0/0x8 @
[ 16.342207]@5 zll----calling---level=6 __initcall_u32_mt_init6+0x0/0x8 @
[ 16.349167]@5 zll----calling---level=6 __initcall_sysctl_ipv4_init6+0x0/0x8 @
[ 16.356355]@5 zll----calling---level=6 __initcall_ah4_init6+0x0/0x8 @
[ 16.362957]@5 zll----calling---level=6 __initcall_esp4_init6+0x0/0x8 @
[ 16.369614]@5 zll----calling---level=6 __initcall_ipcomp4_init6+0x0/0x8 @
[ 16.376582]@5 zll----calling---level=6 __initcall_ipip_init6+0x0/0x8 @
[ 16.383259]@5 zll----calling---level=6 __initcall_tunnel4_init6+0x0/0x8 @
[ 16.390185]@5 zll----calling---level=6 __initcall_xfrm4_transport_init6+0x0/0x8 @
[ 16.397842]@5 zll----calling---level=6 __initcall_xfrm4_mode_tunnel_init6+0x0/0x8 @
[ 16.405657]@5 zll----calling---level=6 __initcall_ipv4_netfilter_init6+0x0/0x8 @
[ 16.413444]@5 zll----calling---level=6 __initcall_nf_conntrack_l3proto_ipv4_init6+0x0/0x8 @
[ 16.421698]@5 zll----calling---level=6 __initcall_nf_nat_l3proto_ipv4_init6+0x0/0x8 @
[ 16.429707]@5 zll----calling---level=6 __initcall_nf_defrag_init6+0x0/0x8 @
[ 16.436819]@5 zll----calling---level=6 __initcall_init6+0x0/0x8 @
[ 16.443067]@5 zll----calling---level=6 __initcall_nf_nat_helper_pptp_init6+0x0/0x8 @
[ 16.450949]@5 zll----calling---level=6 __initcall_nf_nat_proto_gre_init6+0x0/0x8 @
[ 16.458744]@5 ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.464174]@5 zll----calling---level=6 __initcall_ip_tables_init6+0x0/0x8 @
[ 16.471428]@5 zll----calling---level=6 __initcall_iptable_filter_init6+0x0/0x8 @
[ 16.478967]@5 zll----calling---level=6 __initcall_iptable_mangle_init6+0x0/0x8 @
[ 16.486540]@5 zll----calling---level=6 __initcall_iptable_nat_init6+0x0/0x8 @
[ 16.493784]@5 zll----calling---level=6 __initcall_iptable_raw_init6+0x0/0x8 @
[ 16.501044]@5 zll----calling---level=6 __initcall_iptable_security_init6+0x0/0x8 @
[ 16.508696]@5 zll----calling---level=6 __initcall_ah_mt_init6+0x0/0x8 @
[ 16.515479]@5 zll----calling---level=6 __initcall_masquerade_tg_init6+0x0/0x8 @
[ 16.522932]@5 zll----calling---level=6 __initcall_reject_tg_init6+0x0/0x8 @
[ 16.530079]@5 arp_tables: (C) 2002 David S. Miller
[ 16.534821]@5 zll----calling---level=6 __initcall_arp_tables_init6+0x0/0x8 @
[ 16.542026]@5 zll----calling---level=6 __initcall_arpt_mangle_init6+0x0/0x8 @
[ 16.549470]@5 zll----calling---level=6 __initcall_arptable_filter_init6+0x0/0x8 @
[ 16.556970]@5 zll----calling---level=6 __initcall_inet_diag_init6+0x0/0x8 @
[ 16.564086]@5 zll----calling---level=6 __initcall_tcp_diag_init6+0x0/0x8 @
[ 16.571086]@5 TCP: cubic registered
[ 16.574578]@5 zll----calling---level=6 __initcall_cubictcp_register6+0x0/0x8 @
[ 16.581952]@5 Initializing XFRM netlink socket
[ 16.586419]@5 zll----calling---level=6 __initcall_xfrm_user_init6+0x0/0x8 @
[ 16.595354]@5 NET: Registered protocol family 10
[ 16.601061]@5 zll----calling---level=6 __initcall_inet6_init6+0x0/0x8 @
[ 16.606851]@5 zll----calling---level=6 __initcall_ah6_init6+0x0/0x8 @
[ 16.613438]@5 zll----calling---level=6 __initcall_esp6_init6+0x0/0x8 @
[ 16.620092]@5 zll----calling---level=6 __initcall_ipcomp6_init6+0x0/0x8 @
[ 16.627456]@5 zll----calling---level=6 __initcall_xfrm6_tunnel_init6+0x0/0x8 @
[ 16.634437]@5 zll----calling---level=6 __initcall_tunnel6_init6+0x0/0x8 @
[ 16.641359]@5 zll----calling---level=6 __initcall_xfrm6_transport_init6+0x0/0x8 @
[ 16.649017]@5 zll----calling---level=6 __initcall_xfrm6_mode_tunnel_init6+0x0/0x8 @
[ 16.656828]@5 zll----calling---level=6 __initcall_xfrm6_beet_init6+0x0/0x8 @
[ 16.664037]@5 mip6: Mobile IPv6
[ 16.667142]@5 zll----calling---level=6 __initcall_mip6_init6+0x0/0x8 @
[ 16.673936]@5 ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.679380]@5 zll----calling---level=6 __initcall_ip6_tables_init6+0x0/0x8 @
[ 16.686782]@5 zll----calling---level=6 __initcall_ip6table_filter_init6+0x0/0x8 @
[ 16.694413]@5 zll----calling---level=6 __initcall_ip6table_mangle_init6+0x0/0x8 @
[ 16.701982]@5 zll----calling---level=6 __initcall_ip6table_raw_init6+0x0/0x8 @
[ 16.709281]@5 zll----calling---level=6 __initcall_nf_conntrack_l3proto_ipv6_init6+0x0/0x8 @
[ 16.717831]@5 zll----calling---level=6 __initcall_nf_defrag_init6+0x0/0x8 @
[ 16.724890]@5 zll----calling---level=6 __initcall_reject_tg6_init6+0x0/0x8 @
[ 16.732084]@5 sit: IPv6 over IPv4 tunneling driver
[ 16.737884]@5 zll----calling---level=6 __initcall_sit_init6+0x0/0x8 @
[ 16.743485]@5 NET: Registered protocol family 17
[ 16.748089]@5 zll----calling---level=6 __initcall_packet_init6+0x0/0x8 @
[ 16.754963]@5 NET: Registered protocol family 15
[ 16.759519]@5 zll----calling---level=6 __initcall_ipsec_pfkey_init6+0x0/0x8 @
[ 16.767221]@5 Bridge firewalling registered
[ 16.770984]@5 zll----calling---level=6 __initcall_br_init6+0x0/0x8 @
[ 16.777510]@5 Ebtables v2.0 registered
[ 16.781220]@5 zll----calling---level=6 __initcall_ebtables_init6+0x0/0x8 @
[ 16.788364]@5 zll----calling---level=6 __initcall_ebtable_broute_init6+0x0/0x8 @
[ 16.796327]@5 Bluetooth: RFCOMM TTY layer initialized
[ 16.800884]@5 Bluetooth: RFCOMM socket layer initialized
[ 16.806154]@5 Bluetooth: RFCOMM ver 1.11
[ 16.810041]@5 zll----calling---level=6 __initcall_rfcomm_init6+0x0/0x8 @
[ 16.816923]@5 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.822378]@5 Bluetooth: BNEP filters: protocol multicast
[ 16.827765]@5 Bluetooth: BNEP socket layer initialized
[ 16.832891]@5 zll----calling---level=6 __initcall_bnep_init6+0x0/0x8 @
[ 16.839551]@5 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 16.845663]@5 Bluetooth: HIDP socket layer initialized
[ 16.850751]@5 zll----calling---level=6 __initcall_hidp_init6+0x0/0x8 @
[ 16.857532]@5 _core: L2TP core driver, V2.0
[ 16.861978]@5 zll----calling---level=6 __initcall__init6+0x0/0x8 @
[ 16.868653]@5 _ppp: PPPoL2TP kernel driver, V2.0
[ 16.873603]@5 zll----calling---level=6 __initcall_pppo_init6+0x0/0x8 @
[ 16.880609]@5 _ip: L2TP IP encapsulation support (L2TPv3)
[ 16.886649]@5 zll----calling---level=6 __initcall__ip_init6+0x0/0x8 @
[ 16.893303]@5 _netlink: L2TP netlink interface
[ 16.898113]@5 zll----calling---level=6 __initcall__nl_init6+0x0/0x8 @
[ 16.905041]@5 _eth: L2TP ethernet pseudowire support (L2TPv3)
[ 16.911081]@5 zll----calling---level=6 __initcall__eth_init6+0x0/0x8 @
[ 16.918251]@4 _debugfs: L2TP debugfs support
[ 16.922748]@4 zll----calling---level=6 __initcall__debugfs_init6+0x0/0x8 @
[ 16.930089]@4 _ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 16.936989]@4 zll----calling---level=6 __initcall__ip6_init6+0x0/0x8 @
[ 16.943807]@4 zll----calling---level=6 __initcall_rmnet_init6+0x0/0x8 @
[ 16.950492]@4 zll----calling---level=6 __initcall_msm_ipc_router_init6+0x0/0x8 @
[ 16.981037]@0 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 17.017297]@0 Unable to get vbus_otg
[ 17.019861]@0 msm_hsusb_host msm_hsusb_host: unable to register with transceiver
[ 17.027465]@0 platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
[ 17.047587]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc0dea9cd00: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
[ 17.059988]@0 SMBCHG: smbchg_check_chg_version: pmic=PMI8950, wa_flags=0xe
[ 17.066809]@0 SMBCHG: smb_parse_dt: parallel usb thr: 1500, 9v thr: 1000
[ 17.074270]@0 smbcharger_charger_otg: no parameters
[ 17.079085]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc0dea9cd00: external-otg node absent
[ 17.086352]@0 SMBCHG: smbchg_hw_init: Charger Revision DIG: 0.0; ANA: 0.1
[ 17.093089]@0 SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
[ 17.100685]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14d0 writing 0xa5
[ 17.107469]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14f5 writing 0x6
[ 17.114244]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 17.120923]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13fa writing 0x18
[ 17.127754]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
[ 17.134463]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16f6 writing 0x10
[ 17.141294]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 17.147997]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.154687]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10fc writing 0x50
[ 17.161520]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x0
[ 17.168228]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.174915]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10fb writing 0x47
[ 17.181747]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 17.188456]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x9
[ 17.195231]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1242 writing 0x2
[ 17.201817]@0 YL:PSY:CH2:bq25890_power_supply_set_property(): bq25890 set Vbat(4450mV)
[ 17.209839]@0 YL:PSY:CH2:bq25890_set_vbat(): vbat(4450mA)
[ 17.216051]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.221965]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10f4 writing 0x2e
[ 17.228785]@0 SMBCHG: smbchg_hw_init: set vfloat to 4400
[ 17.234076]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.240799]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10f9 writing 0x2
[ 17.247528]@0 SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
[ 17.253274]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 17.259983]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13fe writing 0x1c
[ 17.266841]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.273526]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12f3 writing 0xc3
[ 17.280347]@0 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[ 17.286664]@0 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 17.293858]@0 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 17.302211]@0 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[ 17.302328]@0 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.302938]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 17.303253]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 17.303384]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.303424]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10ff writing 0x8
[ 17.303553]@0 SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
[ 17.303578]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14d0 writing 0xa5
[ 17.303617]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14f2 writing 0x10
[ 17.303795]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.303834]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10f2 writing 0x1f
[ 17.303860]@0 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3600, set to 3000
[ 17.303902]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 17.303942]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 17.303981]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13f3 writing 0x4
[ 17.304020]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14d0 writing 0xa5
[ 17.304058]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x14f3 writing 0x4
[ 17.304097]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
[ 17.304136]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16f5 writing 0xf8
[ 17.304175]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x11d0 writing 0xa5
[ 17.304214]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x11f1 writing 0x68
[ 17.304254]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10d0 writing 0xa5
[ 17.304292]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x10fc writing 0x40
[ 17.304347]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16d0 writing 0xa5
[ 17.304383]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x16f5 writing 0xb8
[ 17.304421]@0 SMBCHG: batt_pres_handler: triggered: 0x00
[ 17.476805]@2 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[ 17.482485]@2 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 17.489629]@2 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 17.498036]@2 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[ 17.498158]@2 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.498226]@2 SMBCHG: batt_hot_handler: triggered: 0x00
[ 17.514312]@0 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[ 17.520546]@0 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 17.527820]@0 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 17.528076]@0 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.528596]@0 SMBCHG: batt_warm_handler: triggered: 0x00
[ 17.528803]@0 SMBCHG: batt_cool_handler: triggered: 0x00
[ 17.528879]@0 SMBCHG: batt_cold_handler: triggered: 0x00
[ 17.528889]@0 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 17.528975]@0 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.529476]@0 SMBCHG: chg_term_handler: triggered: 0x00
[ 17.529610]@0 SMBCHG: usbid_change_handler: triggered
[ 17.529635]@0 SMBCHG: usbid_change_handler: setting usb psy OTG = 0
[ 17.529832]@0 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.529923]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
[ 17.529937]@0 SMBCHG: handle_usb_insertion: triggered
[ 17.529970]@0 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
[ 17.529971]@0 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
[ 17.529985]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
[ 17.530015]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 17.530052]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x89
[ 17.530089]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 17.530114]@0 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 150 mA
[ 17.530181]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.530220]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12f7 writing 0x3b
[ 17.530260]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.530298]@0 SMBCHG: smbchg_masked_write_raw: addr = 0x12f8 writing 0x22
[ 17.530321]@0 SMBCHG: handle_usb_insertion: setting usb psy present = 1
[ 17.530360]@0 SMBCHG: handle_usb_insertion: setting usb psy health GOOD
[ 17.530388]@0 YL:PSY:CH2:bq25890_power_supply_set_property(): POWER_SUPPLY_PROP_PRESENT
[ 17.531239]@0 SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
[ 17.711590]@2 YL:PSY:CH2:bq25890_vbus_keeper(): present(1), ibus(0mA)
[ 17.711999]@2 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[ 17.712020]@2 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[ 17.712051]@2 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 17.712060]@2 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[ 17.743689]@1 YL:PSY:CH2:bq25890_gpio_enable(): ENABLE(0),GPIO(1,1)
[ 17.749897]@1 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.755855]@1 SMBCHG: determine_initial_status: setting usb psy dp=f dm=f
[ 17.762375]@2 SMBCHG: handle_usb_insertion: triggered
[ 17.767593]@2 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
[ 17.773281]@2 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
[ 17.780583]@2 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.787328]@2 SMBCHG: smbchg_masked_write_raw: addr = 0x12f7 writing 0x3b
[ 17.794228]@1 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.800871]@1 SMBCHG: smbchg_masked_write_raw: addr = 0x12f8 writing 0x22
[ 17.807711]@1 SMBCHG: handle_usb_insertion: setting usb psy present = 1
[ 17.814304]@1 SMBCHG: handle_usb_insertion: setting usb psy health GOOD
[ 17.821246]@1 YL:PSY:CH2:bq25890_power_supply_set_property(): POWER_SUPPLY_PROP_PRESENT
[ 17.829173]@3 YL:PSY:CH2:bq25890_vbus_keeper(): present(1), ibus(0mA)
[ 17.835428]@3 YL:PSY:CH2:bq25890_gpio_enable(): ENABLE(0),GPIO(1,1)
[ 17.842891]@3 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.847710]@3 SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1808171, ocv=4108252, ibat=165312, rbatt=327172
[ 17.860398]@3 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.865163]@3 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 17.865954]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x12d0 writing 0xa5
[ 17.865997]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x1243 writing 0x0
[ 17.884350]@3 SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1808171, ocv=4108252, ibat=165312, rbatt=327172
[ 17.892776]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc0dea9cd00: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
[ 17.892786]@3 SMBCHG: smbchg_probe: setting usb psy present = 1
[ 17.892947]@3 SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
[ 17.892974]@3 SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
[ 17.892988]@3 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[ 17.893022]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x10
[ 17.893165]@3 SMBCHG: power_ok_handler: triggered: 0x00
[ 17.893190]@3 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[ 17.893219]@3 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[ 17.893243]@3 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 17.893769]@3 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 17.894088]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc0dea9cd00: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
[ 17.895813]@3 platform 78c4000.qcom,usbbam: Driver usb_bam requests probe deferral
[ 17.896380]@3 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 17.896685]@3 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 17.897687]@3 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 17.898582]@3 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 17.902968]@3 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 17.903037]@3 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 17.903591]@3 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 17.906250]@3 platform 78c4000.qcom,usbbam: Driver usb_bam requests probe deferral
[ 17.906789]@3 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 17.906894]@3 msm_otg 78db000.usb: phy_reset: success
[ 17.907114]@3 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 17.907963]@3 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 17.908826]@3 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 17.913083]@3 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 17.913149]@3 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 17.913700]@3 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 17.914185]@3 zll----calling---level=6 __initcall_deferred_probe_initcall6s+0x0/0x8 @
[ 17.915794]@3 EDAC DEVICE0: Giving out device to module 'arm64-cpu-erp.46' controller 'cache': DEV 'arm64-cpu-erp.46' (POLLED)
[ 17.917763]@3 ARM64 CPU ERP: Could not find
[ 18.012690]@3 msm_otg 78db000.usb: Avail curr from USB = 100
[ 18.012752]@3 msm_otg 78db000.usb: Avail curr from USB = 500
[ 18.013289]@3 SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
[ 18.013316]@3 SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
[ 18.013330]@3 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
[ 18.013362]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x0
[ 18.013404]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x13d0 writing 0xa5
[ 18.013443]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x13f4 writing 0x9
[ 18.013577]@3 SMBCHG: power_ok_handler: triggered: 0x01
[ 18.013620]@3 SMBCHG: smbchg_masked_write_raw: addr = 0x1340 writing 0x2
[ 18.013644]@3 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
[ 18.013682]@3 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[ 18.014478]@3 SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
[ 18.242071]@3 SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
[ 18.242231]@3 zll----calling---level=6 __initcall_arm64_cpu_erp_init6s+0x0/0x8 @
[ 18.242744]@3 Registering SWP/SWPB emulation handler
[ 18.242752]@3 zll----calling---level=7 __initcall_swp_emulation_init7+0x0/0x8 @
[ 18.242760]@3 zll----calling---level=7 __initcall_fpsimd_init7+0x0/0x8 @
[ 18.242767]@3 zll----calling---level=7 __initcall_init_pmu_actions7+0x0/0x8 @
[ 18.242809]@3 zll----calling---level=7 __initcall_perf_debugfs_init7+0x0/0x8 @
[ 18.242854]@3 zll----calling---level=7 __initcall_init_tracecounters7+0x0/0x8 @
[ 18.242894]@3 zll----calling---level=7 __initcall_init_perf_trace7+0x0/0x8 @
[ 18.242900]@3 zll----calling---level=7 __initcall_init_oops_id7+0x0/0x8 @
[ 18.242908]@3 zll----calling---level=7 __initcall_printk_late_init7+0x0/0x8 @
[ 18.242915]@3 zll----calling---level=7 __initcall_sched_init_ops7+0x0/0x8 @
[ 18.242938]@3 zll----calling---level=7 __initcall_sched_init_debug7+0x0/0x8 @
[ 18.243488]@3 zll----calling---level=7 __initcall_pm_qos_power_init7+0x0/0x8 @
[ 18.243513]@3 zll----calling---level=7 __initcall_pm_debugfs_init7+0x0/0x8 @
[ 18.243535]@3 zll----calling---level=7 __initcall_suspend_time_debug_init7+0x0/0x8 @
[ 18.243582]@3 zll----calling---level=7 __initcall_wakeup_reason_init7+0x0/0x8 @
[ 18.243584]@3 Loading module verification certificates
[ 18.246143]@3 MODSIGN: Loaded cert 'Magrathea: Glacier signing key: db9d960e7e2706090e0d722420bf4b46dd5db3a6'
[ 18.246151]@3 zll----calling---level=7 __initcall_load_module_signing_keys7+0x0/0x8 @
[ 18.246157]@3 zll----calling---level=7 __initcall_clear_boot_tracer7+0x0/0x8 @
[ 18.246546]@3 zll----calling---level=7 __initcall_fail_page_alloc_debugfs7+0x0/0x8 @
[ 18.246573]@3 zll----calling---level=7 __initcall_add_shrinker_debug7+0x0/0x8 @
[ 18.246600]@3 zll----calling---level=7 __initcall_show_mem_notifier_debugfs_register7+0x0/0x8 @
[ 18.246614]@3 zll----calling---level=7 __initcall_vmpressure_global_init7+0x0/0x8 @
[ 18.246620]@3 zll----calling---level=7 __initcall_max_swapfiles_check7+0x0/0x8 @
[ 18.246648]@3 zll----calling---level=7 __initcall_kmemleak_late_init7+0x0/0x8 @
[ 18.246655]@3 zll----calling---level=7 __initcall_check_early_ioremap_leak7+0x0/0x8 @
[ 18.246743]@3 zll----calling---level=7 __initcall_prandom_reseed7+0x0/0x8 @
[ 18.249538]@3 zll----calling---level=7 __initcall_smp2p_debugfs_init7+0x0/0x8 @
[ 18.249553]@3 zll----calling---level=7 __initcall_pci_resource_alignment_sysfs_init7+0x0/0x8 @
[ 18.249560]@3 zll----calling---level=7 __initcall_pci_sysfs_init7+0x0/0x8 @
[ 18.250176]@3 zll----calling---level=7 __initcall_msm_rq_stats_init7+0x0/0x8 @
[ 18.250207]@3 zll----calling---level=7 __initcall_init_hlt_debug7+0x0/0x8 @
[ 18.251345]@3 zll----calling---level=7 __initcall_bam_dmux_init7+0x0/0x8 @
[ 18.251410]@3 zll----calling---level=7 __initcall_rpm_smd_debugfs_init7+0x0/0x8 @
[ 18.251416]@3 zll----calling---level=7 __initcall_mem_prot_init7+0x0/0x8 @
[ 18.251606]@3 zll----calling---level=7 __initcall_modem_restart_late_init7+0x0/0x8 @
[ 18.251745]@3 zll----calling---level=7 __initcall_smd_debugfs_init7+0x0/0x8 @
[ 18.251818]@3 zll----calling---level=7 __initcall_smsm_debugfs_init7+0x0/0x8 @
[ 18.252071]@3 zll----calling---level=7 __initcall_modem_restart_late_init7+0x0/0x8 @
[ 18.252222]@3 zll----calling---level=7 __initcall_smem_debugfs_init7+0x0/0x8 @
[ 18.345246]@3 zll----calling---level=7 __initcall_msm_common_log_init7+0x0/0x8 @
[ 18.345353]@3 zll----calling---level=7 __initcall_smp2p_debugfs_init7+0x0/0x8 @
[ 18.345807]@3 zll----calling---level=7 __initcall_socinfo_init_sysfs7+0x0/0x8 @
[ 18.345822]@3 zll----calling---level=7 __initcall_msm_performance_init7+0x0/0x8 @
[ 18.345868]@3 adv_vreg: disabling
[ 18.345922]@3 mem_acc_gfx_corner: disabling
[ 18.345926]@3 regulator-dummy: disabling
[ 18.345933]@3 zll----calling---level=7 __initcall_regulator_init_complete7+0x0/0x8 @
[ 18.345942]@3 zll----calling---level=7 __initcall_cpr_regulator_late_init7+0x0/0x8 @
[ 18.347615]@3 zll----calling---level=7 __initcall_fastrpc_device_init7+0x0/0x8 @
[ 18.353395]@3 sps:BAM 0x00000000078c4000 (va:0xffffff80019e0000) enabled: ver:0xb, number of pipes:4
[ 18.354162]@3 sps:BAM 0x00000000078c4000 is registered.
[ 18.354164]@3 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 18.354485]@3 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 18.355603]@3 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 18.356583]@3 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 18.360914]@3 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 18.360976]@3 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 18.361518]@3 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 18.362104]@3 zll----calling---level=7 __initcall_deferred_probe_enable_fn7+0x0/0x8 @
[ 18.362107]@3 Bootup reason: hard_reset
[ 18.362109]@3 append_boot_reason:
[ 18.362166]@3 zll----calling---level=7 __initcall_yl_bootreason_init7+0x0/0x8 @
[ 18.362943]@3 zll----calling---level=7 __initcall_ngd_slim_init7+0x0/0x8 @
[ 18.362952]@3 RNDIS_IPA module is loaded.
[ 18.362953]@3 zll----calling---level=7 __initcall_rndis_ipa_init_module7+0x0/0x8 @
[ 18.402072]@3 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500
[ 18.402119]@3 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[ 18.402132]@3 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[ 18.748531]@3 SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1916498, ocv=4108252, ibat=-9408, rbatt=327172
[ 18.759325]@4 file system registered
[ 18.762057]@4 mbim_init: initialize 1 instances
[ 18.766539]@4 mbim_init: Initialized 1 ports
[ 18.770628]@4 mbim_bam_setup: no_ports:1
[ 18.775274]@4 mbim_bam_setup: Initialized 1 ports
[ 18.782983]@4 rndis_qc_init: initialize rndis QC instance
[ 18.788657]@4 android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 18.794709]@4 android_usb gadget: Number of LUNs=1
[ 18.799452]@4 lun0: LUN: read only CD-ROM file: (no medium)
[ 18.806006]@4 android_usb gadget: android_usb ready
[ 18.809949]@4 msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 18.816086]@4 msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[ 18.822918]@4 msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[ 18.830761]@1 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 18.831077]@1 zll----calling---level=7 __initcall_init7+0x0/0x8 @
[ 18.833612]@1 input: gpio-keys as /devices/soc.0/gpio_keys.105/input/input3
[ 18.834229]@1 zll----calling---level=7 __initcall_gpio_keys_init7+0x0/0x8 @
[ 18.835276]@1 <<-GTP-INFO->> GTP Driver Version:V1.0<2015/01/28>
[ 18.835278]@1 <<-GTP-INFO->> GTP I2C Address:0x5d
[ 18.870816]@2 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 18.880501]@2 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 18.888702]@2 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 18.900243]@2 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 18.906313]@2 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 18.912075]@2 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500
[ 18.912121]@2 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[ 18.927734]@2 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 18.932812]@2 i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
[ 18.933011]@2 i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 18.933077]@2 <<-GTP-INFO->> I2c Transfer error! (-107)
[ 18.933080]@2 <<-GTP-ERROR->> GTP i2c test failed time 1.
[ 18.952076]@2 i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 18.952135]@2 <<-GTP-INFO->> I2c Transfer error! (-107)
[ 18.952137]@2 <<-GTP-ERROR->> GTP i2c test failed time 2.
[ 18.972066]@2 i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 18.972120]@2 <<-GTP-INFO->> I2c Transfer error! (-107)
[ 18.972122]@2 <<-GTP-ERROR->> GTP i2c test failed time 3.
[ 18.992062]@2 i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 18.992114]@2 <<-GTP-INFO->> I2c Transfer error! (-107)
[ 18.992116]@2 <<-GTP-ERROR->> GTP i2c test failed time 4.
[ 19.012179]@2 i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 19.012259]@2 <<-GTP-INFO->> I2c Transfer error! (-107)
[ 19.012265]@2 <<-GTP-ERROR->> GTP i2c test failed time 5.
[ 19.032018]@2 <<-GTP-ERROR->> I2C communication ERROR!!
[ 19.033234]@2 zll----calling---level=7 __initcall_goodix_ts_init7+0x0/0x8 @
[ 19.088162]@0 qcom,qpnp-rtc qpnp-rtc-ffffffc0dea99600: setting system clock to 1970-01-01 00:17:06 UTC (1026)
[ 19.089399]@0 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.089738]@0 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.090755]@0 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.091706]@0 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.095976]@0 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 19.096122]@0 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 19.096686]@0 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 19.155617]@0 zll----calling---level=7 __initcall_rtc_hctosys7+0x0/0x8 @
[ 19.167613]@1 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.168636]@1 zll----calling---level=7 __initcall_bcl_init7+0x0/0x8 @
[ 19.170878]@1 zll----calling---level=7 __initcall_msm_pm_drv_init7+0x0/0x8 @
[ 19.175322]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175329]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175335]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175340]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175346]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175351]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175755]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175760]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175765]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175770]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175776]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.175781]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176085]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176090]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176095]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176101]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176106]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176111]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176370]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176376]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176381]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176386]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176392]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.176397]@1 dev_pm_opp_get_voltage: Invalid parameters
[ 19.317125]@0 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.318738]@0 zll----calling---level=7 __initcall_msm_core_init7+0x0/0x8 @
[ 19.319063]@0 zll----calling---level=7 __initcall_msm_core_debug_init7+0x0/0x8 @
[ 19.319784]@0 msm_thermal:interrupt_mode_init Interrupt mode init
[ 19.319865]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[ 19.319874]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[ 19.319881]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[ 19.319888]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[ 19.319896]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU4
[ 19.319904]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU5
[ 19.319912]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU6
[ 19.319919]@0 msm_thermal:disable_msm_thermal Max frequency reset for CPU7
[ 19.401821]@1 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.409668]@3 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.410721]@3 zll----calling---level=7 __initcall_msm_thermal_late_init7+0x0/0x8 @
[ 19.425427]@1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_IA72]
[ 19.426058]@1 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 19.426070]@1 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 19.426178]@1 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 19.426333]@1 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.426392]@1 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.473282]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_72-0]
[ 19.479515]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_72-1]
[ 19.486018]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_72-2]
[ 19.492489]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_72-3]
[ 19.498995]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-0]
[ 19.505494]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-1]
[ 19.512035]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-2]
[ 19.518496]@4 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-3]
[ 19.525947]@4 zll----calling---level=7 __initcall_lmh_init_driver7+0x0/0x8 @
[ 19.525954]@4 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.526358]@4 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.527747]@4 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 19.527768]@4 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 19.527989]@4 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 19.528309]@4 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.528410]@4 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.593127]@2 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.593241]@2 zll----calling---level=7 __initcall_lpm_levels_module_init7+0x0/0x8 @
[ 19.593718]@2 zll----calling---level=7 __initcall_lpm_wa_module_init7+0x0/0x8 @
[ 19.593854]@2 qcom,qpnp-flash-led qpnp-flash-led-ffffffc0dea9bc80: Unable to acquire pinctrl
[ 19.595062]@2 zll----calling---level=7 __initcall_qpnp_flash_led_init7+0x0/0x8 @
[ 19.595599]@2 zll----calling---level=7 __initcall_led_gpio_flash_init7+0x0/0x8 @
[ 19.595651]@2 KTD2026:YLLOG:ktd_leds_probe...probe start....
[ 19.595653]@2 KTD2026:YLLOG:ktd_leds i2c check success
[ 19.595655]@2 KTD2026:YLLOG:ktd_leds_parse_dt
[ 19.595657]@2 ...get normal ktd dts config..
[ 19.596270]@2 [ktd_leds]...func:ktd_leds_probe...probe end....
[ 19.596311]@2 i2c-core: driver [ktd_leds] using legacy suspend method
[ 19.596312]@2 i2c-core: driver [ktd_leds] using legacy resume method
[ 19.596322]@2 zll----calling---level=7 __initcall_ktd_leds_init7+0x0/0x8 @
[ 19.596352]@2 zll----calling---level=7 __initcall_sync_debugfs_init7+0x0/0x8 @
[ 19.596722]@2 zll----calling---level=7 __initcall_msm_bus_debugfs_init7+0x0/0x8 @
[ 19.597046]@2 rmnet_ipa started initialization
[ 19.597048]@2 IPA SSR support = True
[ 19.597050]@2 IPA ipa-loaduC = True
[ 19.710812]@4 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.719502]@4 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 19.725641]@4 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 19.733570]@4 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 19.741869]@4 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.750795]@4 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.759953]@4 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.771208]@0 ipa ipa_sps_irq_control_all:868 EP (5) not allocated.
[ 19.776504]@0 ipa ipa_uc_state_check:297 uC is not loaded
[ 19.782598]@4 rmnet_ipa completed initialization
[ 19.786646]@5 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.786846]@5 zll----calling---level=7 __initcall_ipa_wwan_init7+0x0/0x8 @
[ 19.787391]@5 zll----calling---level=7 __initcall_clock_pm_init7+0x0/0x8 @
[ 19.787780]@5 zll----calling---level=7 __initcall_msm_clock_debug_init7+0x0/0x8 @
[ 19.788150]@5 zll----calling---level=7 __initcall_msm_clock_debug_init7+0x0/0x8 @
[ 19.788539]@5 zll----calling---level=7 __initcall_msm_clock_debug_init7+0x0/0x8 @
[ 19.788543]@5 zll----calling---level=7 __initcall_clock_pll_thermal_init7+0x0/0x8 @
[ 19.791427]@5 qcom,cc-debug-8976 qcom,cc-debug.47: Registered Debug Mux successfully
[ 19.791838]@5 zll----calling---level=7 __initcall_msm_clock_debug_init7+0x0/0x8 @
[ 19.791843]@5 zll----calling---level=7 __initcall_tcp_congestion_default7+0x0/0x8 @
[ 19.791872]@5 zll----calling---level=7 __initcall_tcp_fastopen_init7+0x0/0x8 @
[ 19.791902]@5 zll----calling---level=7 __initcall_ip_auto_config7+0x0/0x8 @
[ 19.791905]@5 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 19.792034]@5 zll----calling---level=7 __initcall_regulator_proxy_consumer_remove_all7s+0x0/0x8 @
[ 19.792035]@5 clock_late_init: Removing enables held for handed-off clocks
[ 19.795363]@5 zll----calling---level=7 __initcall_clock_late_init7s+0x0/0x8 @
[ 19.795365]@5 ALSA device list:
[ 19.795366]@5 No soundcards found.
[ 19.795368]@5 zll----calling---level=7 __initcall_alsa_sound_last_init7s+0x0/0x8 @
[ 19.795375]@5 zll----calling---level=7 __initcall_initialize_hashrnd7s+0鳾 19.931509]@4 Freeing unused kernel memory: 760K (ffffffc001800000 - ffffffc0018be000)
[ 19.931747]@4 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 19.931759]@4 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 19.931895]@4 platform qcom,msm-audio-ion.94: Driver msm-audio-ion requests probe deferral
[ 19.932108]@4 spmi msm8x16_wcd_codec-ffffffc0dea99b80: Driver wcd-spmi-core requests probe deferral
[ 19.932162]@4 spmi msm8x16_wcd_codec-ffffffc0dea9dd80: Driver wcd-spmi-core requests probe deferral
[ 19.932305]@4 platform qcom,msm-voip-dsp.80: Driver msm-voip-dsp requests probe deferral
[ 19.932453]@4 platform qcom,msm-pcm-voice.81: Driver msm-pcm-voice requests probe deferral
[ 19.997108]@4 init: init started!
[ 20.021542]@4 SELinux: 2048 avtab hash slots, 10529 rules.
[ 20.021968]@4 SMBCHG: is_hvdcp_present: HVDCP_STS = 0x00
[ 20.021970]@4 ljc in smbchg_hvdcp_det_work is_hvdcp_present 0
[ 20.021983]@4 SMBCHG: is_hvdcp_present: HVDCP_STS = 0x00
[ 20.065923]@4 SELinux: 2048 avtab hash slots, 10529 rules.
[ 20.070497]@4 SELinux: 1 users, 2 roles, 925 types, 0 bools, 1 sens, 1024 cats
[ 20.077654]@4 SELinux: 87 classes, 10529 rules
[ 20.088485]@4 SELinux: Completing initialization.
[ 20.092272]@4 SELinux: Setting up existing superblocks.
[ 20.097542]@4 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 20.104879]@4 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 20.112376]@4 SELinux: initialized (dev bdev, type bdev), not configured for labeling
[ 20.120107]@4 SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 20.127246]@4 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 20.134629]@4 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 20.188297]@4 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 20.194338]@4 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 20.201337]@4 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 20.210557]@4 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 20.218134]@4 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 20.226143]@4 SELinux: initialized (dev configfs, type configfs), not configured for labeling
[ 20.234596]@4 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 20.241990]@4 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 20.399264]@5 type=1403 audit(1027.849:2): policy loaded auid=4294967295 ses=4294967295
[ 20.406856]@5 type=1404 audit(1027.869:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 20.532121]@5 init: (Initializing SELinux enforcing took 0.53s.)
[ 20.545645]@5 init: init second stage started!
[ 20.781394]@5 init: waitpid failed: No child processes
[ 20.785684]@5 init: (Loading properties from /default.prop took 0.00s.)
[ 20.793217]@5 init: (Parsing /init.environ.rc took 0.00s.)
[ 20.797790]@5 init: (Parsing /init.usb.rc took 0.00s.)
[ 20.803228]@5 init: /init.qcom.rc: 507: user option requires a user id
[ 20.810880]@5 init: (Parsing init.qcom.usb.rc took 0.00s.)
[ 20.815728]@5 init: init.target.rc: 294: invalid command 'load_all_props'
[ 20.822375]@5 init: could not import file 'init.carrier.rc' from 'init.target.rc'
[ 20.829567]@5 init: (Parsing init.target.rc took 0.01s.)
[ 20.835092]@5 init: (Parsing init.qcom.factory.rc took 0.00s.)
[ 20.840676]@5 init: (Parsing /init.qcom.rc took 0.04s.)
[ 20.846097]@5 init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 20.851834]@5 init: (Parsing /init.zygote64_32.rc took 0.00s.)
[ 20.857671]@5 init: (Parsing /init.trace.rc took 0.00s.)
[ 20.862912]@5 init: (Parsing /init.rc took 0.07s.)
[ 20.867827]@5 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 20.877390]@5 init: Starting service 'ueventd'...
[ 20.883251]@5 init: Waiting for /dev/.coldboot_done...
[ 20.884308]@5 ueventd: ueventd started!
[ 21.089370]@4 SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1916498, ocv=4108252, ibat=-9408, rbatt=327172
[ 21.184708]@4 YL:PSY:CH2:bq25890_get_charge_state(): charge state(3)
[ 21.190474]@4 YL:PSY:CH2:bq25890_get_vbus(): VBUS++
[ 21.195175]@4 power_supply usb-parallel: driver failed to report `model_name' property: -22
[ 21.545497]@4 ueventd: Coldboot took 0.65s.
[ 21.549260]@0 init: Waiting for /dev/.coldboot_done took 0.67s.
[ 21.554728]@0 init: /dev/hw_random no黐 21.560474]@0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 21.568289]@0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 21.577428]@3 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 21.586938]@4 init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[ 21.596392]@4 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[ 21.605223]@4 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
[ 21.616552]@4 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 21.623179]@4 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
[ 21.634380]@4 init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[ 21.642749]@4 init: cannot find '/sbin/qfintverify', disabling 'qfintverify'
[ 21.649564]@4 init: /dev/hw_random not found
[ 21.653921]@4 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[ 21.662301]@1 fs_mgr: Warning: unknown flag resize
[ 21.735748]@2 EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: barrier=1,discard
[ 21.744112]@4 SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
[ 21.750951]@4 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
[ 21.761496]@4 EXT4-fs (mmcblk0p49): Ignoring removed nomblk_io_submit option
[ 21.773129]@4 EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 21.783020]@4 SELinux: initialized (dev mmcblk0p49, type ext4), uses xattr
[ 21.789811]@4 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
[ 21.800594]@4 fs_mgr: check_fs(): unmount(/data) succeeded
[ 21.806590]@4 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
[ 21.912058]@5 e2fsck (365) used greatest stack depth: 11496 bytes left
[ 21.917681]@4 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 21.917681]@4
[ 21.923928]@4 e2fsck: data: clean, 959/1507328 files, 342379/6029312 blocks
[ 21.923928]@4
[ 21.938286]@4 EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: nodelalloc,barrier=1
[ 21.946841]@4 SELinux: initialized (dev mmcblk0p49, type ext4), uses xattr
[ 21.953782]@4 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
[ 21.964024]@4 EXT4-fs (mmcblk0p26): Ignoring removed nomblk_io_submit option
[ 21.974442]@4 EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 21.984209]@4 SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
[ 21.991096]@4 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/persist,/persist,ext4)=0: Success
[ 22.001882]@4 fs_mgr: check_fs(): unmount(/persist) succeeded
[ 22.006663]@4 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/persist
[ 22.029506]@0 type=1400 audit(1029.479:4): avc: denied { getattr } for pid=370 comm="e2fsck" path="/dev/block/mmcblk0p26" dev="tmpfs" ino=7477 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 22.049261]@4 type=1400 audit(1029.509:5): avc: denied { getattr } for pid=370 comm="e2fsck" path="/dev/block/mmcblk0p26" dev="tmpfs" ino=7477 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 22.069574]@4 type=1400 audit(1029.529:6): avc: denied { read write } for pid=370 comm="e2fsck" name="mmcblk0p26" dev="tmpfs" ino=7477 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 22.090225]@4 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 22.090225]@4
[ 22.095648]@4 e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/bootdevice/by-name/persist
[ 22.095648]@4
[ 22.108023]@4 e2fsck:
[ 22.108023]@4
[ 22.111927]@4 e2fsck: You must have r/w access to the filesystem or be root
[ 22.111927]@4
[ 22.120509]@4 e2fsck: e2fsck terminated by exit(8)
[ 22.120509]@4
[ 22.132111]@5 EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: nodelalloc,barrier=1
[ 22.140651]@5 SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
[ 22.147574]@5 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
[ 22.162592]@4 EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
[ 22.170174]@4 SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
[ 22.181980]@5 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
[ 22.189565]@5 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
[ 22.204660]@5 SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling
[ 22.213055]@5 init: Starting service 'logd'...
[ 22.232072]@5 init: (Loading properties from /system/build.prop took 0.01s.)
[ 22.238155]@5 init: (Loading properties from /vendor/build.prop took 0.00s.)
[ 22.245211]@5 init: (Loading properties from /factory/factory.prop took 0.00s.)
[ 22.252500]@5 fs_mgr: Warning: unknown flag resize
[ 22.255231]@5 logd.auditd: start
[ 22.255244]@5 logd.klogd: 22113325722
[ 22.264146]@5 init: /recovery not specified in fstab
[ 22.271462]@5 init: Starting service 'vold'...
[ 22.277751]@5 init: Not bootcharting.
[ 22.319725]@5 init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
[ 22.354129]@4 init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 388) exited with status 0
[ 22.385253]@5 fs_mgr: Warning: unknown flag resize
[ 22.388096]@5 init: (Loading properties from /data/local.prop took 0.00s.)
[ 22.466165]@1 init: Starting service 'logd-reinit'...
[ 22.471185]@1 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[ 22.481405]@1 init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
[ 22.486678]@1 logd.daemon: reinit
[ 22.497444]@4 init: Service 'logd-reinit' (pid 390) exited with status 0
[ 22.504063]@4 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[ 22.515028]@4 init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
[ 22.527712]@4 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[ 22.539394]@3 init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
[ 22.551897]@4 init: property 'persist.sys.modem_dbg_cfg' doesn't exist while expanding '${persist.sys.modem_dbg_cfg}'
[ 22.562422]@4 init: cannot expand '${persist.sys.modem_dbg_cfg}' while writing to '/sys/module/pil_msa/parameters/modem_dbg_cfg'
[ 22.573964]@4 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[ 22.585233]@4 init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
[ 22.598332]@0 init: property 'persist.sys.external' doesn't exist while expanding '${persist.sys.external}'
[ 22.608047]@4 init: cannot expand '${persist.sys.external}' while writing to '/sys/kernel/codec_type/boot'
[ 22.622667]@4 subsys-pil-tz c200000.qcom,lpass: adsp: loading from 0x000000008c200000 to 0x000000008d200000
[ 22.863752]@5 subsys-pil-tz c200000.qcom,lpass: adsp: Brought out of reset
[ 22.893303]@0 subsys-pil-tz c200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 22.901329]@0 subsys-pil-tz c200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 22.901467]@0 init: Starting service 'exec 1 (/init.qcom.early_boot.sh)'...
[ 22.916881]@0 L-Notify: Generel: 7
[ 22.918531]@0 msm8952-asoc-wcd c051000.sound: CODEC 8x16_wcd not registered
[ 22.918555]@0 platform c051000.sound: Driver msm8952-asoc-wcd requests probe deferral
[ 22.935884]@1 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, ffffffc001ce5980
[ 22.938757]@1 apr_tal:Q6 Is Up
[ 22.947711]@4 diag: In diag_send_peripheral_buffering_mode, unable to send buffering mode packet to peripheral 1, err: -19
[ 22.948291]@4 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[ 22.973921]@2 msm8952-asoc-wcd c051000.sound: default codec configured
[ 22.979417]@2 msm8952_asoc_machine_probe: ext_pa = 16
[ 22.984537]@4 is_us_eu_switch_gpio_support
[ 22.988534]@4 msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
[ 22.998438]@4 is_ext_spk_gpio_support:Enter
[ 23.000000]@4 init: property_set("ro.sf.lcd_density", "480") failed
[ 23.008855]@4 msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 23.018754]@4 msm8952-asoc-wcd c051000.sound: ext_audio_switch_support: missing qcom,msm-ext-audio-switch in dt node
[ 23.029250]@4 msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: doesn't require ext audio switch support
[ 23.039584]@4 msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 23.050368]@4 wcd-spmi-core msm8x16_wcd_codec-ffffffc0dea99b80: Error: regulator not found
[ 23.066122]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
[ 23.077453]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
[ 23.089781]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
[ 23.102098]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
[ 23.118922]@1 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: no sink widget found for QUIN_MI2S_RX_DL_HL
[ 23.127456]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: Failed to add route QUIN_MI2S_DL_HL -> Switch -> QUIN_MI2S_RX_DL_HL
[ 23.139566]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[ 23.151859]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[ 23.165430]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: no sink widget found for SENARY_MI2S_TX
[ 23.173906]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[ 23.204483]@4 msm-pcm-routing qcom,msm-pcm-routing.74: ASoC: mux SLIM_0_RX AANC MUX has no paths
[ 23.216526]@4 wcd-spmi-core msm8x16_wcd_codec-ffffffc0dea99b80: ASoC: mux RX3 MIX1 INP3 has no paths
[ 23.224850]@4 wcd-spmi-core msm8x16_wcd_codec-ffffffc0dea99b80: ASoC: mux RX2 MIX1 INP3 has no paths
[ 23.226935]@4 init: Service 'exec 1 (/init.qcom.early_boot.sh)' (pid 406) exited with status 0
[ 23.230595]@4 init: Starting service 'healthd'...
[ 23.231381]@4 init: Starting service 'lmkd'...
[ 23.232184]@4 init: Starting service 'servicema挌r挌捠??init: Starting service 'surfaceflinger'...
[ 23.233640]@4 init: Starting service 'qcom-c_core-sh'...
[ 23.234400]@4 init: Starting service 'rmt_storage'...
[ 23.234883]@4 init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
[ 23.235088]@4 init: Starting service 'config_bluetooth'...
[ 23.235715]@4 init: Starting service 'cs-early-boot'...
[ 23.236468]@4 init: Starting service 'qseecomd'...
[ 23.237289]@4 init: Starting service 'per_mgr'...
[ 23.242775]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[ 23.242817]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[ 23.242859]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[ 23.242902]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[ 23.242946]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[ 23.242987]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[ 23.243031]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[ 23.243085]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[ 23.243130]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[ 23.243176]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[ 23.243226]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[ 23.243273]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[ 23.243314]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[ 23.243352]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[ 23.243392]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[ 23.243433]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[ 23.243475]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[ 23.243516]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[ 23.243558]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[ 23.243598]@4 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[ 23.254485]@4 init: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/fw_name': No such file or directory
[ 23.254536]@4 init: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/update_fw': No such file or directory
[ 23.255635]@4 init: Starting service 'console'...
[ 23.256635]@4 init: Starting service 'netd'...
[ 23.257449]@4 init: Starting service 'debuggerd'...
[ 23.258139]@4 init: Starting service 'debuggerd64'...
[ 23.258928]@4 init: Starting service 'ril-daemon'...
[ 23.259668]@4 init: Starting service 'drm'...
[ 23.260463]@4 init: Starting service 'media'...
[ 23.261257]@4 init: Starting service 'installd'...
[ 23.290458]@4 init: Starting service 'flash_recovery'...
[ 23.292280]@4 init: Starting service 'keystore'...
[ 23.293274]@4 init: Starting service 'qcomsysd'...
[ 23.294761]@4 init: Starting service 'qcom-c_main-sh'...
[ 23.302660]@4 init: Starting service 'irsc_util'...
[ 23.303477]@4 init: Starting service 'tftp_server'...
[ 23.304031]@4 init: cannot find '/system/bin/usb_uicc_client', disabling 'usb_uicc_daemon'
[ 23.352461]@4 init: Starting service 'bms-sh'...
[ 23.353274]@4 init: Starting service 'qcom-usb-sh'...
[ 23.353778]@4 init: cannot find '/system/bin/qrngd', disabling 'qrngd'
[ 23.354240]@4 init: Starting service 'fingerprintd'...
[ 23.355643]@4 init: Starting service 'thermal-engine'...
[ 23.356502]@4 init: Starting service 'wcnss-service'...
[ 23.357286]@4 init: Starting service 'imsqmidaemon'...
[ 23.358139]@4 init: Starting service 'adsprpcd'...
[ 23.396299]@4 init: Starting service 'hvdcp_opti'...
[ 23.397073]@4 init: Starting service 'zygote'...
[ 23.397794]@4 init: Starting service 'zygote_secondary'...
[ 23.398646]@4 init: Starting service 'gatekeeperd'...
[ 23.433509]@4 init: Starting service 'perfprofd'...
[ 23.435249]@4 init: Starting service 'cnd'...
[ 23.437057]@4 init: Starting service 'dpmd'...
[ 23.443943]@4 init: Starting service 'ptt_socket_app'...
[ 23.444993]@4 init: cannot find '/system/bin/cnss_diag', disabling 'cnss_diag'
[ 23.445528]@4 init: Starting service 'cnss-daemon'...
[ 23.447333]@4 init: Starting service 'loc_launcher'...
[ 23.448808]@4 init: Starting service 'qcom-sh'...
[ 23.450440]@4 init: Starting service 'RIDL'...
[ 23.474725]@4 init: Starting service 'qseeproxydaemon'...
[ 23.476546]@4 init: Starting service 'qcamerasvr'...
[ 23.477468]@4 init: cannot find '/system/bin/qfp-daemon', disabling 'qfp-daemon'
[ 23.477534]@4 init: cannot find '/system/bin/seempd', disabling 'seempd'
[ 23.478215]@4 init: Starting service 'time_daemon'...
[ 23.479822]@4 init: Starting service 'audiod'...
[ 23.480793]@4 init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator'
[ 23.481246]@4 type=1400 audit(1030.929:7): avc: denied { read } for pid=494 comm="applypatch" name="mmcblk0p23" dev="tmpfs" ino=7465 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 23.481541]@4 init: Starting service 'mdtp_service'...
[ 23.503069]@4 type=1400 audit(1030.939:8): avc: denied { write } for pid=484 comm="sh" name="kmsg" dev="tmpfs" ino=12758 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=0
[ 23.504419]@4 init: Service 'irsc_util' (pid 469) exited with status 0
[ 23.505189]@4 init: Service 'bms-sh' (pid 483) exited with status 0
[ 23.506954]@4 init: Starting service 'ppd'...
[ 23.523349]@4 init: Service 'qcom-c_core-sh' (pid 445) exited with status 0
[ 23.524266]@4 enable_store: android_usb: already disabled
[ 23.527176]@4 init: Starting service 'adbd'...
[ 23.529011]@4 init: Starting service 'imsdatadaemon'...
[ 23.594717]@4 type=1400 audit(1031.009:9): avc: denied { setattr } for pid=511 comm="ptt_socket_app" name="WCNSS_qcom_wlan_nv.bin" dev="mmcblk0p26" ino=12 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:persist_file:s0 tclass=file permissive=0
[ 23.620511]@4 init: Starting service 'qmuxd'...
[ 23.641816]@4 init: Starting service 'ipacm-diag'...
[ 23.680244]@4 init: Starting service 'ipacm'...
[ 23.721998]@4 init: Starting service 'sensors'...
[ 23.747679]@4 init: Starting service 'ril-daemon2'...
[ 23.750276]@4 init: Starting service 'msm_irqbal_lb'...
[ 23.795579]@4 init: Starting service 'qti'...
[ 23.808707]@4 type=1400 audit(1031.259:10): avc: denied { write } for pid=484 comm="sh" name="kmsg" dev="tmpfs" ino=12758 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=0
[ 23.813774]@4 init: Starting service 'netmgrd'...
[ 23.886911]@4 init: Service 'qcom-c_main-sh' (pid 468) exited with status 0
[ 23.888549]@4 init: avc: denied { set } for property=ctl.rmt_storage scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:ctl_default_prop:s0 tclass=property_service
[ 23.888572]@4 init: sys_prop: Unable to start service ctl [rmt_storage] uid:0 gid:0 pid:638
[ 23.920543]@4 init: avc: denied { set } for property=ctl.rfs_access scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:ctl_default_prop:s0 tclass=property_service
[ 23.920569]@4 init: sys_prop: Unable to start service ctl [rfs_access] uid:0 gid:0 pid:641
[ 23.934213]@4 init: Service 'qcom-sh' (pid 514) exited with status 0
shell@CPA9S_9:/ $ [ 23.992416]@5 axl in msm8x16_wcd_codec_enable_spk_pa,event:4,control name:SPK PA
[ 23.998799]@5 axl in msm8x16_wcd_codec_enable_spk_pa,set the GPIO to low
[ 24.006941]@4 axl in msm8x16_wcd_codec_enable_spk_pa,event:8,control name:SPK PA
[ 24.066307]@3 msm_audrx_init(),dev_nameqcom,msm-dai-q6-mi2s-prim.203
[ 24.096489]@2 type=1400 audit(1031.070:11): avc: denied { read } for pid=524 comm="applypatch" name="mmcblk0p23" dev="tmpfs" ino=7465 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 24.116697]@4 type=1400 audit(1031.070:12): avc: denied { read } for pid=524 comm="applypatch" name="mmcblk0p22" dev="tmpfs" ino=7461 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 24.140322]@4 type=1400 audit(1031.110:13): avc: denied { write } for pid=448 comm="sh" name="/" dev="tmpfs" ino=12622 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 24.168861]@2 init: Service 'flash_recovery' (pid 463) exited with status 0
[ 24.187026]@2 init: Service 'cs-early-boot' (pid 448) exited with status 0
[ 24.193469]@5 init: Service 'config_bluetooth' (pid 447) exited with status 0
[ 24.204726]@1 init: Service 'qcom-usb-sh' (pid 484) exited with status 0
[ 24.206515]@1 get_prop_batt_status: 2 callbacks suppressed
[ 24.222538]@3 QSEECOM: qseecom_load_app: App (soter) does'nt exist, loading apps for first time
[ 24.230301]@3 scm_call failed: func id 0x72000101, arginfo: 0x3, args: 0x1b1c, 0x22388, 0xf6d00000, 0x0, ret: -2, syscall returns: 0xffffffffffffffff, 0x0, 0x0
[ 24.237521]@3 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.237613]@3 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.237697]@3 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.252598]@3 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.252659]@3 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.252713]@3 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.289230]@4 QSEECOM: qseecom_load_app: scm_call to load app failed
[ 24.291530]@4 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.291568]@4 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.291602]@4 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.320767]@1 QSEECOM: qseecom_ioctl: failed load_app request: -22
[ 24.323938]@1 ipa ipa_uc_state_check:297 uC is not loaded
[ 24.323960]@1 ipa ipa_sps_irq_control_all:868 EP (5) not allocated.
[ 24.324243]@1 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.324283]@1 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.324332]@1 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.326652]@1 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.326688]@1 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.326728]@1 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.328223]@1 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 24.328255]@1 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 24.328289]@1 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 24.423783]@3 ipa ipa_uc_state_check:297 uC is not loaded
[ 24.482657]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 24.487716]@4 Disable the mclk
[ 25.162415]@0 mdss_fb_blank_unblank: *****LCD panel wakeup time = [0 ms]*****
[ 25.168637]@0 system request 0,clear fingerprint_unblank flag
[ 25.168691]@0 YL:PSY:CH1:smbchg_fb_notifier_callback(): @@@ LCD On:1
[ 25.174490]@0 YL:PSY:CH1:qpnp_smbchg_print_log(): bat_v:3929878,batt_i:686946,batt_capcity:50,batt_temp:327,batt_stat:2
[ 25.174506]@0 YL:PSY:CH1:is_hvdcp_adapter(): not HVDCP
[ 25.174509]@0 YL:PSY:CH1:calc_user_mode_limited_level(): @@@ User scene limit Mode levl:0, user scene mode:1
[ 25.174513]@0 YL:PSY:CH1:smbchg_charge_adjust_work(): @@@ final lvl_sel:0, old therm_lvl_sel:0,total thermal_levels:7
[ 25.174515]@0 YL:PSY:CH1:smbchg_charge_adjust_work(): @@@ Current Limit to 2100
[ 25.338826]@1 type=1400 audit(1032.250:14): avc: denied { dac_override } for pid=582 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.354552]@1 type=1400 audit(1032.250:15): avc: denied { dac_override } for pid=455 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.370551]@5 type=1400 audit(1032.260:16): avc: denied { dac_override } for pid=582 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.386719]@5 type=1400 audit(1032.260:17): avc: denied { dac_read_search } for pid=582 comm="rild" capability=2 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.403167]@5 type=1400 audit(1032.260:18): avc: denied { dac_override } for pid=455 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.420023]@5 type=1400 audit(1032.260:19): avc: denied { dac_read_search } for pid=455 comm="rild" capability=2 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.435907]@5 type=1400 audit(1032.260:20): avc: denied { dac_override } for pid=582 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.453072]@5 type=1400 audit(1032.260:21): avc: denied { dac_override } for pid=455 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.469036]@5 type=1400 audit(1032.260:22): avc: denied { dac_override } for pid=582 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.484652]@5 type=1400 audit(1032.260:23): avc: denied { dac_read_search } for pid=582 comm="rild" capability=2 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.501314]@5 type=1400 audit(1032.260:24): avc: denied { dac_override } for pid=455 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.517416]@5 type=1400 audit(1032.260:25): avc: denied { dac_read_search } for pid=455 comm="rild" capability=2 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.534106]@5 type=1400 audit(1032.260:26): avc: denied { dac_override } for pid=582 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.550233]@5 type=1400 audit(1032.260:27): avc: denied { dac_override } for pid=455 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 25.566443]@5 type=1400 audit(1032.440:28): avc: denied { read write } for pid=582 comm="rild" name="yl_params1" dev="tmpfs" ino=12817 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 25.572697]@5 pil-q6v5-mss 4080000.qcom,mss: MBA: Debug policy not present - msadp
[ 25.575769]@5 power up size 7 power down size 5
[ 25.575825]@5 msm_camera_power_up:1304
[ 25.575828]@5 msm_camera_power_up:1314 dev name = 0.qcom,camera
[ 25.575832]@5 msm_camera_power_up_share_power:1656 dev name = 0.qcom,camera
[ 25.575835]@5 msm_camera_power_up_share_power:1657 postition=0
[ 25.576213]@5 msm_camera_power_up_share_power:1675
[ 25.576315]@5 msm_camera_power_up_share_power index 0
[ 25.576318]@5 msm_camera_power_up_share_power type 1
[ 25.576321]@5 msm_camera_power_up_share_power:1758 gpio set val 897
[ 25.577419]@5 msm_camera_power_up_share_power index 1
[ 25.577422]@5 msm_camera_power_up_share_power type 1
[ 25.577425]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.579331]@5 msm_camera_power_up_share_power index 2
[ 25.579334]@5 msm_camera_power_up_share_power type 1
[ 25.579338]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 25.584753]@5 msm_camera_power_up_share_power index 3
[ 25.584757]@5 msm_camera_power_up_share_power type 1
[ 25.584761]@5 msm_camera_power_up_share_power:1758 gpio set val 912
[ 25.590818]@5 msm_camera_power_up_share_power index 4
[ 25.590822]@5 msm_camera_power_up_share_power type 1
[ 25.590826]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 25.595907]@5 msm_camera_power_up_share_power index 5
[ 25.595911]@5 msm_camera_power_up_share_power type 0
[ 25.601978]@5 msm_camera_power_up_share_power index 6
[ 25.601981]@5 msm_camera_power_up_share_power type 1
[ 25.601985]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.608770]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 25.608771]@5 ------------[ cut here ]------------
[ 25.608784]@5 WARNING: at /company/zhengliliang/code/L_6.0_8976/LA.BR.1.3.4-01810-8976.0/kernel/drivers/clk/qcom/clock-local2.c:216 rcg_clk_enable+0x50/0xa0()
[ 25.608928]@5 ---[ end trace 174803349a4350d0 ]---
[ 25.609439]@5 msm_camera_power_up_share_power exit
[ 25.609584]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 25.609628]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 25.609632]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 25.609635]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 25.609639]@5 msm_sensor_match_id: imx378: read id failed
[ 25.609642]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 25.609644]@5 msm_camera_power_down:1534
[ 25.609647]@5 msm_camera_power_down:1541 dev name = 0.qcom,camera
[ 25.609650]@5 msm_camera_power_down_share_power:1911
[ 25.609782]@5 msm_camera_power_down_share_power index 0
[ 25.609784]@5 msm_camera_power_down_share_power type 1
[ 25.609788]@5 msm_camera_power_down_share_power:1956 gpio set val 1008
[ 25.611844]@5 msm_camera_power_down_share_power index 1
[ 25.611847]@5 msm_camera_power_down_share_power type 0
[ 25.612979]@5 msm_camera_power_down_share_power index 2
[ 25.612983]@5 msm_camera_power_down_share_power type 1
[ 25.612987]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 25.619051]@5 msm_camera_power_down_share_power index 3
[ 25.619054]@5 msm_camera_power_down_share_power type 1
[ 25.619058]@5 msm_camera_power_down_share_power:1956 gpio set val 912
[ 25.625100]@5 msm_camera_power_down_share_power index 4
[ 25.625103]@5 msm_camera_power_down_share_power type 1
[ 25.625107]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 25.631358]@5 msm_camera_power_down_share_power exit
[ 25.635577]@5 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 25.646674]@5 msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
[ 25.646932]@5 APR: Wrong parameters
[ 25.646938]@5 adm_get_params_v2: Failed to Get Params on port_id 0x0 -22
[ 25.646944]@5 msm_dolby_dap_param_visualizer_control_get: get parameters failed
[ 25.650366]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 25.651106]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 25.651604]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 25.651989]@5 msm_camera_power_up:1304
[ 25.651994]@5 msm_camera_power_up:1314 dev name = 0.qcom,camera
[ 25.651998]@5 msm_camera_power_up_share_power:1656 dev name = 0.qcom,camera
[ 25.652001]@5 msm_camera_power_up_share_power:1657 postition=0
[ 25.652344]@5 msm_camera_power_up_share_power:1675
[ 25.652455]@5 msm_camera_power_up_share_power index 0
[ 25.652458]@5 msm_camera_power_up_share_power type 1
[ 25.652461]@5 msm_camera_power_up_share_power:1758 gpio set val 897
[ 25.652787]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.654628]@5 msm_camera_power_up_share_power index 1
[ 25.654632]@5 msm_camera_power_up_share_power type 1
[ 25.654637]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.654810]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 25.655593]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 25.656400]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.656682]@5 msm_camera_power_up_share_power index 2
[ 25.656685]@5 msm_camera_power_up_share_power type 1
[ 25.656689]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 25.658583]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.659981]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.661398]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.661992]@5 msm_camera_power_up_share_power index 3
[ 25.661996]@5 msm_camera_power_up_share_power type 1
[ 25.662000]@5 msm_camera_power_up_share_power:1758 gpio set val 912
[ 25.663431]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.665123]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.666608]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.668065]@5 msm_camera_power_up_share_power index 4
[ 25.668068]@5 msm_camera_power_up_share_power type 1
[ 25.668072]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 25.668275]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 25.669354]@5 mi2s_rx_bit_format_get: mi2s_rx_bit_format = 2, ucontrol value = 0
[ 25.669547]@5 msm_ter_mi2s_tx_ch_get: msm_ter_mi2s_tx_ch = 1
[ 25.669772]@5 msm_pri_mi2s_rx_ch_get: msm_pri_mi2s_rx_ch = 1
[ 25.670020]@5 loopback_mclk_get
[ 25.670507]@5 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 25.670507]@5 msm_proxy_rx_ch_get: msm_proxy_rx_ch = 2
[ 25.670748]@5 msm_vi_feed_tx_ch_get: msm_vi_feed_tx_ch = 0
[ 25.674147]@5 msm_camera_power_up_share_power index 5
[ 25.674150]@5 msm_camera_power_up_share_power type 0
[ 25.680446]@5 msm_camera_power_up_share_power index 6
[ 25.680450]@5 msm_camera_power_up_share_power type 1
[ 25.680454]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.687264]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 25.687475]@5 msm_camera_power_up_share_power exit
[ 25.687623]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 25.687672]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 25.687676]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 25.687680]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 25.687684]@5 msm_sensor_match_id: imx378: read id failed
[ 25.687687]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 25.687690]@5 msm_camera_power_down:1534
[ 25.687693]@5 msm_camera_power_down:1541 dev name = 0.qcom,camera
[ 25.687697]@5 msm_camera_power_down_share_power:1911
[ 25.687836]@5 msm_camera_power_down_share_power index 0
[ 25.687838]@5 msm_camera_power_down_share_power type 1
[ 25.687841]@5 msm_camera_power_down_share_power:1956 gpio set val 1008
[ 25.689898]@5 msm_camera_power_down_share_power index 1
[ 25.689902]@5 msm_camera_power_down_share_power type 0
[ 25.692008]@5 msm_camera_power_down_share_power index 2
[ 25.692011]@5 msm_camera_power_down_share_power type 1
[ 25.692015]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 25.698071]@5 msm_camera_power_down_share_power index 3
[ 25.698075]@5 msm_camera_power_down_share_power type 1
[ 25.698079]@5 msm_camera_power_down_share_power:1956 gpio set val 912
[ 25.704128]@5 msm_camera_power_down_share_power index 4
[ 25.704132]@5 msm_camera_power_down_share_power type 1
[ 25.704136]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 25.710380]@5 msm_camera_power_down_share_power exit
[ 25.732065]@5 msm_camera_power_up:1304
[ 25.732070]@5 msm_camera_power_up:1314 dev name = 0.qcom,camera
[ 25.732074]@5 msm_camera_power_up_share_power:1656 dev name = 0.qcom,camera
[ 25.732076]@5 msm_camera_power_up_share_power:1657 postition=0
[ 25.732443]@5 msm_camera_power_up_share_power:1675
[ 25.732545]@5 msm_camera_power_up_share_power index 0
[ 25.732547]@5 msm_camera_power_up_share_power type 1
[ 25.732551]@5 msm_camera_power_up_share_power:1758 gpio set val 897
[ 25.734619]@5 msm_camera_power_up_share_power index 1
[ 25.734622]@5 msm_camera_power_up_share_power type 1
[ 25.734627]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.736694]@5 msm_camera_power_up_share_power index 2
[ 25.736698]@5 msm_camera_power_up_share_power type 1
[ 25.736702]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 25.741989]@5 msm_camera_power_up_share_power index 3
[ 25.741992]@5 msm_camera_power_up_share_power type 1
[ 25.741996]@5 msm_camera_power_up_share_power:1758 gpio set val 912
[ 25.748137]@5 msm_camera_power_up_share_power index 4
[ 25.748140]@5 msm_camera_power_up_share_power type 1
[ 25.748144]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 25.754196]@5 msm_camera_power_up_share_power index 5
[ 25.754200]@5 msm_camera_power_up_share_power type 0
[ 25.760458]@5 msm_camera_power_up_share_power index 6
[ 25.760462]@5 msm_camera_power_up_share_power type 1
[ 25.760465]@5 msm_camera_power_up_share_power:1758 gpio set val 1008
[ 25.767234]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 25.767330]@5 msm_camera_power_up_share_power exit
[ 25.767478]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 25.767524]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 25.767527]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 25.767531]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 25.767535]@5 msm_sensor_match_id: imx378: read id failed
[ 25.767538]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 25.767541]@5 msm_camera_power_down:1534
[ 25.767544]@5 msm_camera_power_down:1541 dev name = 0.qcom,camera
[ 25.767548]@5 msm_camera_power_down_share_power:1911
[ 25.767686]@5 msm_camera_power_down_share_power index 0
[ 25.767689]@5 msm_camera_power_down_share_power type 1
[ 25.767692]@5 msm_camera_power_down_share_power:1956 gpio set val 1008
[ 25.769736]@5 msm_camera_power_down_share_power index 1
[ 25.769739]@5 msm_camera_power_down_share_power type 0
[ 25.771796]@5 msm_camera_power_down_share_power index 2
[ 25.771799]@5 msm_camera_power_down_share_power type 1
[ 25.771803]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 25.777856]@5 msm_camera_power_down_share_power index 3
[ 25.777860]@5 msm_camera_power_down_share_power type 1
[ 25.777864]@5 msm_camera_power_down_share_power:1956 gpio set val 912
[ 25.780259]@5 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 25.780259]@5 msm_btsco_rate_put: msm_btsco_rate = 8000
[ 25.783915]@5 msm_camera_power_down_share_power index 4
[ 25.783918]@5 msm_camera_power_down_share_power type 1
[ 25.783922]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 25.790162]@5 msm_camera_power_down_share_power exit
[ 25.812044]@5 imx378 power up failed
[ 25.812044]@5 MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
[ 25.812049]@5 MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed
[ 25.826502]@5 power up size 6 power down size 5
[ 25.826551]@5 msm_camera_fill_vreg_params:59 i 2 j 2 cam_vdig
[ 25.826554]@5 msm_camera_fill_vreg_params:59 i 3 j 2 cam_vdig
[ 25.826558]@5 msm_camera_power_up:1304
[ 25.826562]@5 msm_camera_power_up:1314 dev name = 1.qcom,camera
[ 25.826566]@5 msm_camera_power_up_share_power:1656 dev name = 1.qcom,camera
[ 25.826568]@5 msm_camera_power_up_share_power:1657 postition=1
[ 25.826926]@5 msm_camera_power_up_share_power:1675
[ 25.827025]@5 msm_camera_power_up_share_power index 0
[ 25.827028]@5 msm_camera_power_up_share_power type 1
[ 25.827031]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 25.833095]@5 msm_camera_power_up_share_power index 1
[ 25.833099]@5 msm_camera_power_up_share_power type 1
[ 25.833104]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 25.839202]@5 msm_camera_power_up_share_power index 2
[ 25.839205]@5 msm_camera_power_up_share_power type 2
[ 25.846178]@5 msm_camera_power_up_share_power index 3
[ 25.846182]@5 msm_camera_power_up_share_power type 1
[ 25.846186]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 25.848250]@5 msm_camera_power_up_share_power index 4
[ 25.848253]@5 msm_camera_power_up_share_power type 0
[ 25.854633]@5 msm_camera_power_up_share_power index 5
[ 25.854637]@5 msm_camera_power_up_share_power type 1
[ 25.854641]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 25.866412]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 25.866593]@5 msm_camera_power_up_share_power exit
[ 25.866741]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 25.866787]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 25.866790]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 25.866794]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 25.866798]@5 msm_sensor_match_id: ov8856: read id failed
[ 25.866802]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 25.866804]@5 msm_camera_power_down:1534
[ 25.866808]@5 msm_camera_power_down:1541 dev name = 1.qcom,camera
[ 25.866811]@5 msm_camera_power_down_share_power:1911
[ 25.866949]@5 msm_camera_power_down_share_power index 0
[ 25.866951]@5 msm_camera_power_down_share_power type 1
[ 25.866955]@5 msm_camera_power_down_share_power:1956 gpio set val 1009
[ 25.873085]@5 msm_camera_power_down_share_power index 1
[ 25.873088]@5 msm_camera_power_down_share_power type 0
[ 25.879200]@5 msm_camera_power_down_share_power index 2
[ 25.879204]@5 msm_camera_power_down_share_power type 1
[ 25.879208]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 25.885259]@5 msm_camera_power_down_share_power index 3
[ 25.885262]@5 msm_camera_power_down_share_power type 2
[ 25.892055]@5 msm_camera_power_down_share_power index 4
[ 25.892058]@5 msm_camera_power_down_share_power type 1
[ 25.892062]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 25.898323]@5 msm_camera_power_down_share_power exit
[ 25.921997]@5 msm_camera_power_up:1304
[ 25.922002]@5 msm_camera_power_up:1314 dev name = 1.qcom,camera
[ 25.922006]@5 msm_camera_power_up_share_power:1656 dev name = 1.qcom,camera
[ 25.922009]@5 msm_camera_power_up_share_power:1657 postition=1
[ 25.922412]@5 msm_camera_power_up_share_power:1675
[ 25.922522]@5 msm_camera_power_up_share_power index 0
[ 25.922524]@5 msm_camera_power_up_share_power type 1
[ 25.922528]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 25.928600]@5 msm_camera_power_up_share_power index 1
[ 25.928603]@5 msm_camera_power_up_share_power type 1
[ 25.928607]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 25.934766]@5 msm_camera_power_up_share_power index 2
[ 25.934770]@5 msm_camera_power_up_share_power type 2
[ 25.935873]@5 wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
[ 25.937475]@5 wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
[ 25.941841]@5 msm_camera_power_up_share_power index 3
[ 25.941845]@5 msm_camera_power_up_share_power type 1
[ 25.941849]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 25.943915]@5 msm_camera_power_up_share_power index 4
[ 25.943919]@5 msm_camera_power_up_share_power type 0
[ 25.950249]@5 msm_camera_power_up_share_power index 5
[ 25.950253]@5 msm_camera_power_up_share_power type 1
[ 25.950257]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 25.961536]@5 core_set_license: Invalid cal block to send
[ 25.962252]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 25.962285]@5 msm_camera_power_up_share_power exit
[ 25.962463]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 25.962555]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 25.962559]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 25.962563]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 25.962567]@5 msm_sensor_match_id: ov8856: read id failed
[ 25.962571]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 25.962574]@5 msm_camera_power_down:1534
[ 25.962578]@5 msm_camera_power_down:1541 dev name = 1.qcom,camera
[ 25.962582]@5 msm_camera_power_down_share_power:1911
[ 25.962730]@5 msm_camera_power_down_share_power index 0
[ 25.962732]@5 msm_camera_power_down_share_power type 1
[ 25.962736]@5 msm_camera_power_down_share_power:1956 gpio set val 1009
[ 25.968852]@5 msm_camera_power_down_share_power index 1
[ 25.968856]@5 msm_camera_power_down_share_power type 0
[ 25.975069]@5 msm_camera_power_down_share_power index 2
[ 25.975073]@5 msm_camera_power_down_share_power type 1
[ 25.975078]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 25.982016]@5 msm_camera_power_down_share_power index 3
[ 25.982020]@5 msm_camera_power_down_share_power type 2
[ 25.988793]@5 msm_camera_power_down_share_power index 4
[ 25.988849]@5 msm_camera_power_down_share_power type 1
[ 25.988854]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 25.995172]@5 msm_camera_power_down_share_power exit
[ 25.998669]@5 destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
[ 25.998916]@5 destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
[ 25.999066]@5 destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
[ 25.999192]@5 destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
[ 26.004792]@5 mediaserver (457) used greatest stack depth: 11288 bytes left
[ 26.005895]@5 init: Service 'media' (pid 457) exited with status 1
[ 26.005924]@5 init: Service 'media' (pid 457) killing any children in process group
[ 26.022033]@5 msm_camera_power_up:1304
[ 26.022039]@5 msm_camera_power_up:1314 dev name = 1.qcom,camera
[ 26.022044]@5 msm_camera_power_up_share_power:1656 dev name = 1.qcom,camera
[ 26.022047]@5 msm_camera_power_up_share_power:1657 postition=1
[ 26.022517]@5 msm_camera_power_up_share_power:1675
[ 26.022625]@5 msm_camera_power_up_share_power index 0
[ 26.022627]@5 msm_camera_power_up_share_power type 1
[ 26.022631]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 26.028849]@5 msm_camera_power_up_share_power index 1
[ 26.028853]@5 msm_camera_power_up_share_power type 1
[ 26.028857]@5 msm_camera_power_up_share_power:1758 gpio set val 942
[ 26.031994]@5 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 26.031997]@5 Disable the mclk
[ 26.034929]@5 msm_camera_power_up_share_power index 2
[ 26.034933]@5 msm_camera_power_up_share_power type 2
[ 26.042026]@5 msm_camera_power_up_share_power index 3
[ 26.042031]@5 msm_camera_power_up_share_power type 1
[ 26.042036]@5 msm_camera_power_up_share_power:1758 gpio set val 911
[ 26.044095]@5 msm_camera_power_up_share_power index 4
[ 26.044099]@5 msm_camera_power_up_share_power type 0
[ 26.050424]@5 msm_camera_power_up_share_power index 5
[ 26.050428]@5 msm_camera_power_up_share_power type 1
[ 26.050433]@5 msm_camera_power_up_share_power:1758 gpio set val 1009
[ 26.062468]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 26.062516]@5 msm_camera_power_up_share_power exit
[ 26.062665]@5 msm_cci_irq:1611 MASTER_1 error 0x40000000
[ 26.062724]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 26.062728]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 26.062732]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 26.062736]@5 msm_sensor_match_id: ov8856: read id failed
[ 26.062741]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 26.062744]@5 msm_camera_power_down:1534
[ 26.062747]@5 msm_camera_power_down:1541 dev name = 1.qcom,camera
[ 26.062751]@5 msm_camera_power_down_share_power:1911
[ 26.062935]@5 msm_camera_power_down_share_power index 0
[ 26.062938]@5 msm_camera_power_down_share_power type 1
[ 26.062942]@5 msm_camera_power_down_share_power:1956 gpio set val 1009
[ 26.069006]@5 msm_camera_power_down_share_power index 1
[ 26.069010]@5 msm_camera_power_down_share_power type 0
[ 26.075589]@5 msm_camera_power_down_share_power index 2
[ 26.075593]@5 msm_camera_power_down_share_power type 1
[ 26.075598]@5 msm_camera_power_down_share_power:1956 gpio set val 911
[ 26.081680]@5 msm_camera_power_down_share_power index 3
[ 26.081684]@5 msm_camera_power_down_share_power type 2
[ 26.088493]@5 msm_camera_power_down_share_power index 4
[ 26.088497]@5 msm_camera_power_down_share_power type 1
[ 26.088501]@5 msm_camera_power_down_share_power:1956 gpio set val 942
[ 26.094766]@5 msm_camera_power_down_share_power exit
[ 26.114032]@5 init: Starting service 'bootanim'...
[ 26.122042]@5 ov8856 power up failed
[ 26.122042]@5 MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
[ 26.122048]@5 MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed
[ 26.186938]@5 power up size 6 power down size 5
[ 26.187010]@5 msm_camera_power_up:1304
[ 26.187015]@5 msm_camera_power_up:1314 dev name = 2.qcom,camera
[ 26.187022]@5 msm_camera_power_up_share_power:1656 dev name = 2.qcom,camera
[ 26.187025]@5 msm_camera_power_up_share_power:1657 postition=1
[ 26.187457]@5 msm_camera_power_up_share_power:1675
[ 26.187583]@5 msm_camera_power_up_share_power index 0
[ 26.187585]@5 msm_camera_power_up_share_power type 1
[ 26.187590]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.193652]@5 msm_camera_power_up_share_power index 1
[ 26.193656]@5 msm_camera_power_up_share_power type 1
[ 26.193661]@5 msm_camera_power_up_share_power:1758 gpio set val 984
[ 26.199714]@5 msm_camera_power_up_share_power index 2
[ 26.199720]@5 msm_camera_power_up_share_power type 1
[ 26.199724]@5 msm_camera_power_up_share_power:1758 gpio set val 948
[ 26.205782]@5 msm_camera_power_up_share_power index 3
[ 26.205786]@5 msm_camera_power_up_share_power type 1
[ 26.205791]@5 msm_camera_power_up_share_power:1758 gpio set val 986
[ 26.211844]@5 msm_camera_power_up_share_power index 4
[ 26.211847]@5 msm_camera_power_up_share_power type 0
[ 26.218242]@5 msm_camera_power_up_share_power index 5
[ 26.218247]@5 msm_camera_power_up_share_power type 1
[ 26.218252]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.230120]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 26.230189]@5 msm_camera_power_up_share_power exit
[ 26.230337]@5 msm_cci_irq:1605 MASTER_0 error 0x10000000
[ 26.230385]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 26.230388]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 26.230393]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 26.230398]@5 msm_sensor_match_id: ov5695: read id failed
[ 26.230402]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 26.230405]@5 msm_camera_power_down:1534
[ 26.230409]@5 msm_camera_power_down:1541 dev name = 2.qcom,camera
[ 26.230413]@5 msm_camera_power_down_share_power:1911
[ 26.230567]@5 msm_camera_power_down_share_power index 0
[ 26.230570]@5 msm_camera_power_down_share_power type 1
[ 26.230574]@5 msm_camera_power_down_share_power:1956 gpio set val 1010
[ 26.236635]@5 msm_camera_power_down_share_power index 1
[ 26.236639]@5 msm_camera_power_down_share_power type 0
[ 26.242043]@5 msm_camera_power_down_share_power index 2
[ 26.242047]@5 msm_camera_power_down_share_power type 1
[ 26.242052]@5 msm_camera_power_down_share_power:1956 gpio set val 986
[ 26.248119]@5 msm_camera_power_down_share_power index 3
[ 26.248123]@5 msm_camera_power_down_share_power type 1
[ 26.248128]@5 msm_camera_power_down_share_power:1956 gpio set val 984
[ 26.254198]@5 msm_camera_power_down_share_power index 4
[ 26.254204]@5 msm_camera_power_down_share_power type 1
[ 26.254210]@5 msm_camera_power_down_share_power:1956 gpio set val 948
[ 26.260486]@5 msm_camera_power_down_share_power exit
[ 26.281997]@5 msm_camera_power_up:1304
[ 26.282003]@5 msm_camera_power_up:1314 dev name = 2.qcom,camera
[ 26.282008]@5 msm_camera_power_up_share_power:1656 dev name = 2.qcom,camera
[ 26.282011]@5 msm_camera_power_up_share_power:1657 postition=1
[ 26.282464]@5 msm_camera_power_up_share_power:1675
[ 26.282575]@5 msm_camera_power_up_share_power index 0
[ 26.282578]@5 msm_camera_power_up_share_power type 1
[ 26.282582]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.288648]@5 msm_camera_power_up_share_power index 1
[ 26.288652]@5 msm_camera_power_up_share_power type 1
[ 26.288657]@5 msm_camera_power_up_share_power:1758 gpio set val 984
[ 26.294708]@5 msm_camera_power_up_share_power index 2
[ 26.294712]@5 msm_camera_power_up_share_power type 1
[ 26.294716]@5 msm_camera_power_up_share_power:1758 gpio set val 948
[ 26.300769]@5 msm_camera_power_up_share_power index 3
[ 26.300773]@5 msm_camera_power_up_share_power type 1
[ 26.300778]@5 msm_camera_power_up_share_power:1758 gpio set val 986
[ 26.306833]@5 msm_camera_power_up_share_power index 4
[ 26.306837]@5 msm_camera_power_up_share_power type 0
[ 26.313116]@5 msm_camera_power_up_share_power index 5
[ 26.313119]@5 msm_camera_power_up_share_power type 1
[ 26.313124]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.325013]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 26.325043]@5 msm_camera_power_up_share_power exit
[ 26.325194]@5 msm_cci_irq:1605 MASTER_0 error 0x10000000
[ 26.325251]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 26.325254]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 26.325258]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 26.325261]@5 msm_sensor_match_id: ov5695: read id failed
[ 26.325263]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 26.325266]@5 msm_camera_power_down:1534
[ 26.325268]@5 msm_camera_power_down:1541 dev name = 2.qcom,camera
[ 26.325271]@5 msm_camera_power_down_share_power:1911
[ 26.325406]@5 msm_camera_power_down_share_power index 0
[ 26.325408]@5 msm_camera_power_down_share_power type 1
[ 26.325411]@5 msm_camera_power_down_share_power:1956 gpio set val 1010
[ 26.331481]@5 msm_camera_power_down_share_power index 1
[ 26.331485]@5 msm_camera_power_down_share_power type 0
[ 26.337550]@5 msm_camera_power_down_share_power index 2
[ 26.337552]@5 msm_camera_power_down_share_power type 1
[ 26.337557]@5 msm_camera_power_down_share_power:1956 gpio set val 986
[ 26.343617]@5 msm_camera_power_down_share_power index 3
[ 26.343620]@5 msm_camera_power_down_share_power type 1
[ 26.343624]@5 msm_camera_power_down_share_power:1956 gpio set val 984
[ 26.349685]@5 msm_camera_power_down_share_power index 4
[ 26.349689]@5 msm_camera_power_down_share_power type 1
[ 26.349693]@5 msm_camera_power_down_share_power:1956 gpio set val 948
[ 26.355978]@5 msm_camera_power_down_share_power exit
[ 26.381989]@5 msm_camera_power_up:1304
[ 26.381995]@5 msm_camera_power_up:1314 dev name = 2.qcom,camera
[ 26.382000]@5 msm_camera_power_up_share_power:1656 dev name = 2.qcom,camera
[ 26.382003]@5 msm_camera_power_up_share_power:1657 postition=1
[ 26.382464]@5 msm_camera_power_up_share_power:1675
[ 26.382573]@5 msm_camera_power_up_share_power index 0
[ 26.382575]@5 msm_camera_power_up_share_power type 1
[ 26.382580]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.388637]@5 msm_camera_power_up_share_power index 1
[ 26.388639]@5 msm_camera_power_up_share_power type 1
[ 26.388643]@5 msm_camera_power_up_share_power:1758 gpio set val 984
[ 26.394687]@5 msm_camera_power_up_share_power index 2
[ 26.394691]@5 msm_camera_power_up_share_power type 1
[ 26.394694]@5 msm_camera_power_up_share_power:1758 gpio set val 948
[ 26.400739]@5 msm_camera_power_up_share_power index 3
[ 26.400742]@5 msm_camera_power_up_share_power type 1
[ 26.400746]@5 msm_camera_power_up_share_power:1758 gpio set val 986
[ 26.406799]@5 msm_camera_power_up_share_power index 4
[ 26.406803]@5 msm_camera_power_up_share_power type 0
[ 26.413151]@5 msm_camera_power_up_share_power index 5
[ 26.413153]@5 msm_camera_power_up_share_power type 1
[ 26.413158]@5 msm_camera_power_up_share_power:1758 gpio set val 1010
[ 26.425093]@5 msm_cci_init: Failed in getting TOP gdscr regulator handle
[ 26.425177]@5 msm_camera_power_up_share_power exit
[ 26.425328]@5 msm_cci_irq:1605 MASTER_0 error 0x10000000
[ 26.425378]@5 msm_cci_i2c_read:842 read_words = 0, exp words = 1
[ 26.425382]@5 msm_cci_i2c_read_bytes:925 failed rc -22
[ 26.425386]@5 msm_camera_cci_i2c_read: line 48 rc = -22
[ 26.425390]@5 msm_sensor_match_id: ov5695: read id failed
[ 26.425393]@5 msm_sensor_check_id:1640 match id failed rc -22
[ 26.425396]@5 msm_camera_power_down:1534
[ 26.425399]@5 msm_camera_power_down:1541 dev name = 2.qcom,camera
[ 26.425403]@5 msm_camera_power_down_share_power:1911
[ 26.425552]@5 msm_camera_power_down_share_power index 0
[ 26.425555]@5 msm_camera_power_down_share_power type 1
[ 26.425559]@5 msm_camera_power_down_share_power:1956 gpio set val 1010
[ 26.431615]@5 msm_camera_power_down_share_power index 1
[ 26.431618]@5 msm_camera_power_down_share_power type 0
[ 26.437679]@5 msm_camera_power_down_share_power index 2
[ 26.437682]@5 msm_camera_power_down_share_power type 1
[ 26.437686]@5 msm_camera_power_down_share_power:1956 gpio set val 986
[ 26.443743]@5 msm_camera_power_down_share_power index 3
[ 26.443746]@5 msm_camera_power_down_share_power type 1
[ 26.443750]@5 msm_camera_power_down_share_power:1956 gpio set val 984
[ 26.449799]@5 msm_camera_power_down_share_power index 4
[ 26.449802]@5 msm_camera_power_down_share_power type 1
[ 26.449807]@5 msm_camera_power_down_share_power:1956 gpio set val 948
[ 26.456064]@5 msm_camera_power_down_share_power exit
[ 26.482202]@5 ov5695 power up failed
[ 26.482202]@5 MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
[ 26.482205]@5 MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed
[ 26.518590]@5 init: Service 'RIDL' (pid 515) exited with status 65
[ 27.008960]@5 MSM-CPP cpp_init_hardware:1066 stream_cnt:0
[ 28.332923]@3 system request 0,clear fingerprint_unblank flag
[ 28.333016]@3 YL:PSY:CH1:smbchg_fb_notifier_callback(): @@@ LCD On:1
[ 28.333495]@3 type=1400 audit(1032.450:29): avc: denied { read write } for pid=455 comm="rild" name="yl_params1" dev="tmpfs" ino=12817 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 28.333565]@5 type=1400 audit(1032.940:30): avc: denied { read write } for pid=457 comm="mediaserver" name="i2c-2" dev="tmpfs" ino=12734 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 28.345994]@5 YL:PSY:CH1:qpnp_smbchg_print_log(): bat_v:3929878,batt_i:686946,batt_capcity:50,batt_temp:327,batt_stat:2
[ 28.346012]@5 YL:PSY:CH1:is_hvdcp_adapter(): not HVDCP
[ 28.346016]@5 YL:PSY:CH1:calc_user_mode_limited_level(): @@@ User scene limit Mode levl:0, user scene mode:1
[ 28.346020]@5 YL:PSY:CH1:smbchg_charge_adjust_work(): @@@ final lvl_sel:0, old therm_lvl_sel:0,total thermal_levels:7
[ 28.346023]@5 YL:PSY:CH1:smbchg_charge_adjust_work(): @@@ Current Limit to 2100
[ 28.522310]@3 init: Starting service 'media'...
[ 29.150737]@4 M-Notify: General: 7
[ 29.384149]@2 ipa-wan handle_indication_req:133 not send indication
[ 29.385915]@2 ipa ipa_uc_wdi_event_log_info_handler:322 WDI feature missing 0x1
[ 29.385937]@2 ipa ipa_uc_response_hdlr:457 IPA uC loaded
[ 29.386292]@2 ipa ipa_uc_response_hdlr:477 Expected cmd=4294967295 rcvd cmd=9
[ 29.429698]@5 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, ffffffc001ce58d8
[ 29.438412]@0 diag: In diag_send_peripheral_buffering_mode, unable to send buffering mode packet to peripheral 0, err: -19
[ 29.491215]@5 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 29.502254]@4 msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
[ 29.509602]@2 adm_callback: cmd = 0x1032a returned error = 0x2
[ 29.515038]@2 adm_callback: ADM get param error = 2, resuming
[ 29.871960]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 29.877015]@4 Disable the mclk
[ 30.350467]@4 Couldn't get snoc_qosgen
[ 30.501963]@4 adm_get_params_v2: get params timed out port_id = 0x0
[ 30.507197]@4 msm_dolby_dap_param_visualizer_control_get: get parameters failed
[ 30.515798]@4 msm_pcm_volume_ctl_get substream runtime not found
[ 30.521018]@4 msm_pcm_volume_ctl_get substream runtime not found
[ 30.527117]@4 msm_pcm_volume_ctl_get substream runtime not found
[ 30.533015]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.540340]@4 msm_pcm_volume_ctl_get substream runtime not found
[ 30.546110]@4 msm_pcm_volume_ctl_get substream runtime not found
[ 30.552126]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.559328]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.566525]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.573420]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.580414]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.587575]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.594554]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.601525]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 30.608511]@4 mi2s_rx_bit_format_get: mi2s_rx_bit_format = 2, ucontrol value = 0
[ 30.615645]@4 msm_ter_mi2s_tx_ch_get: msm_ter_mi2s_tx_ch = 1
[ 30.621258]@4 msm_pri_mi2s_rx_ch_get: msm_pri_mi2s_rx_ch = 1
[ 30.627028]@4 loopback_mclk_get
[ 30.630102]@4 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 30.635264]@4 msm_proxy_rx_ch_get: msm_proxy_rx_ch = 2
[ 30.640522]@4 msm_vi_feed_tx_ch_get: msm_vi_feed_tx_ch = 0
[ 30.686088]@5 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 30.690360]@5 msm_btsco_rate_put: msm_btsco_rate = 8000
[ 30.999056]@3 diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffc001ce5a28
[ 31.017728]@1 wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
[ 31.024817]@4 wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
[ 31.034735]@4 core_set_license: Invalid cal block to send[ 31.037087]@4 init: property_set("ro.ril.svlte1x", "false") failed
[ 31.046209]@0 init: property_set("ro.ril.svdo", "false") failed
[ 31.051828]@3 type=1400 audit(1038.020:31): avc: denied { read write } for pid=1273 comm="mediaserver" name="i2c-2" dev="tmpfs" ino=12734 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 31.065506]@3 destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
[ 31.065725]@3 destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
[ 31.065810]@3 destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
[ 31.065890]@3 destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
[ 31.070650]@3 init: Service 'media' (pid 1273) exited with status 1
[ 31.070687]@3 init: Service 'media' (pid 1273) killing any children in process group
[ 31.151979]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 31.154235]@4 wcnss: no space available for smd frame
[ 31.162919]@4 Disable the mclk
[ 31.182054]@1 wcnss: no space available for smd frame
[ 31.212142]@1 wcnss: no space available for smd frame
[ 31.225379]@4 type=1400 audit(1038.200:32): avc: denied { read write } for pid=1707 comm="rild" name="yl_params1" dev="tmpfs" ino=12817 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 31.243324]@4 wcnss: no space available for smd frame
[ 31.284799]@0 ipa-wan ipa_wwan_ioctl:1457 get AGG size 8192 count 10
[ 31.290650]@0 ipa ipa_assign_policy:2772 get close-by 8192
[ 31.295750]@5 ipa ipa_assign_policy:2778 set rx_buff_sz 7808
[ 31.301229]@5 ipa ipa_assign_policy:2800 set aggr_limit 6
[ 31.320246]@5 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data0) register to IPA
[ 31.503073]@5 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data1) register to IPA
[ 31.676359]@4 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data2) register to IPA
[ 31.863150]@4 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data3) register to IPA
[ 32.034873]@4 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data4) register to IPA
[ 32.214830]@5 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data5) register to IPA
[ 32.334486]@5 type=1400 audit(1039.310:33): avc: denied { sys_module } for pid=837 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.350149]@5 type=1400 audit(1039.310:34): avc: denied { sys_module } for pid=845 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.375356]@0 type=1400 audit(1039.350:35): avc: denied { sys_module } for pid=837 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.390729]@0 type=1400 audit(1039.350:36): avc: denied { sys_module } for pid=845 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.401158]@0 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data6) register to IPA
[ 32.414309]@2 type=1400 audit(1039.360:37): avc: denied { sys_module } for pid=845 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.429944]@5 type=1400 audit(1039.360:38): avc: denied { sys_module } for pid=837 comm="rild" capability=16 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=0
[ 32.610074]@5 ipa-wan ipa_wwan_ioctl:1365 dev(rmnet_data7) register to IPA
[ 33.468727]@4 init: Starting service 'media'...
[ 34.363818]@5 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 34.374057]@5 msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
[ 34.381383]@2 adm_callback: cmd = 0x1032a returned error = 0x2
[ 34.386839]@2 adm_callback: ADM get param error = 2, resuming
[ 34.781967]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 34.787021]@4 Disable the mclk
[ 35.371975]@5 adm_get_params_v2: get params timed out port_id = 0x0
[ 35.377215]@5 msm_dolby_dap_param_visualizer_control_get: get parameters failed
[ 35.385889]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 35.391135]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 35.397155]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 35.403141]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.410436]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 35.416187]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 35.422274]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.429420]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.436528]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.443530]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.450575]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.457565]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.464642]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.471627]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 35.478641]@5 mi2s_rx_bit_format_get: mi2s_rx_bit_format = 2, ucontrol value = 0
[ 35.485695]@5 msm_ter_mi2s_tx_ch_get: msm_ter_mi2s_tx_ch = 1
[ 35.491342]@5 msm_pri_mi2s_rx_ch_get: msm_pri_mi2s_rx_ch = 1
[ 35.497122]@5 loopback_mclk_get
[ 35.500196]@5 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 35.505395]@5 msm_proxy_rx_ch_get: msm_proxy_rx_ch = 2
[ 35.510610]@5 msm_vi_feed_tx_ch_get: msm_vi_feed_tx_ch = 0
[ 35.552390]@4 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 35.556622]@4 msm_btsco_rate_put: msm_btsco_rate = 8000
[ 35.600268]@4 wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
[ 35.606224]@4 wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
[ 35.615168]@4 core_set_license: Invalid cal block to send[ 35.623575]@0 type=1400 audit(1042.600:39): avc: denied { read write } for pid=2604 comm="mediaserver" name="i2c-2" dev="tmpfs" ino=12734 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 35.633656]@0 destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
[ 35.633813]@0 destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
[ 35.633901]@0 destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
[ 35.633988]@0 destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
[ 35.638159]@0 init: Service 'media' (pid 2604) exited with status 1
[ 35.638174]@0 init: Service 'media' (pid 2604) killing any children in process group
[ 36.021983]@0 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 36.027042]@0 Disable the mclk
[ 36.786898]@0 get_prop_batt_status: 3 callbacks suppressed
[ 36.793284]@5 healthd: Could not open '/sys/class/power_supply/user_scene_mode/type'
[ 36.800052]@5 healthd: Could not open '/sys/class/power_supply/dump_regs/type'
[ 36.807345]@5 healthd: Could not open '/sys/class/power_supply/charge_mode/type'
[ 37.093720]@4 devfreq qcom,kgsl-busmon.36: Couldn't update frequency transition information.
[ 37.458052]@5 type=1400 audit(1044.430:40): avc: denied { write } for pid=2896 comm="BootAnimation" name="property_service" dev="tmpfs" ino=7357 scontext=u:r:bootanim:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=0
[ 38.630002]@5 init: Starting service 'media'...
[ 39.461965]@4 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 39.472226]@5 msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
[ 39.479601]@2 adm_callback: cmd = 0x1032a returned error = 0x2
[ 39.485008]@2 adm_callback: ADM get param error = 2, resuming
[ 39.595912]@4 --mdss--mdss_dsi_on---enter---
[ 39.599146]@4 --mdss--mdss_dsi_on---exit---
[ 39.881952]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 39.887004]@4 Disable the mclk
[ 40.471970]@5 adm_get_params_v2: get params timed out port_id = 0x0
[ 40.477212]@5 msm_dolby_dap_param_visualizer_control_get: get parameters failed
[ 40.485803]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 40.491121]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 40.497126]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 40.503080]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.510358]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 40.516138]@5 msm_pcm_volume_ctl_get substream runtime not found
[ 40.522138]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.529383]@5 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.536496]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.543449]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.550303]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.557489]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.564564]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.571464]@4 msm_compr_audio_effects_config_get: stream or effects inactive
[ 40.578427]@4 mi2s_rx_bit_format_get: mi2s_rx_bit_format = 2, ucontrol value = 0
[ 40.585511]@4 msm_ter_mi2s_tx_ch_get: msm_ter_mi2s_tx_ch = 1
[ 40.591187]@4 msm_pri_mi2s_rx_ch_get: msm_pri_mi2s_rx_ch = 1
[ 40.597038]@4 loopback_mclk_get
[ 40.600038]@4 msm_btsco_rate_get: msm_btsco_rate = 8000[ 40.605434]@4 msm_proxy_rx_ch_get: msm_proxy_rx_ch = 2
[ 40.610502]@4 msm_vi_feed_tx_ch_get: msm_vi_feed_tx_ch = 0
[ 40.650266]@5 msm_btsco_rate_get: msm_btsco_rate = 8000
[ 40.654538]@5 msm_btsco_rate_put: msm_btsco_rate = 8000
[ 40.695675]@5 wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
[ 40.701620]@5 wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
[ 40.710716]@5 core_set_license: Invalid cal block to send[ 40.718720]@4 type=1400 audit(1047.690:41): avc: denied { read write } for pid=2975 comm="mediaserver" name="i2c-2" dev="tmpfs" ino=12734 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=0
[ 40.735205]@4 destroy_all_cal_blocks: unmap_cal failed, cal type 2, ret = -22!
[ 40.735506]@4 destroy_all_cal_blocks: unmap_cal failed, cal type 3, ret = -22!
[ 40.735670]@4 destroy_all_cal_blocks: unmap_cal failed, cal type 4, ret = -22!
[ 40.735805]@4 destroy_all_cal_blocks: unmap_cal failed, cal type 5, ret = -22!
[ 40.742151]@4 init: Service 'media' (pid 2975) exited with status 1
[ 40.742180]@4 init: Service 'media' (pid 2975) killing any children in process group
[ 41.121966]@4 msm8952_disable_mclk: mclk_enabled 1 mclk_rsc_ref 0
[ 41.127021]@4 Disable the mclk